Missing Bluetooth Pairing Services for Treo650 and 15"1.67Albook(1.4.3)

Hi,
When I got my Treo650 originally I ran bluetooth setup assistant and when paired, sync with ical, adress book, use phones gprs connection, etc... were listed as bluetooth services supported. After some upgrade, not sure which one,(treo/OSX) there are no services listed when I run bluetooth setup assistant. How can a treo 650 not have any supported bluetooth services?
Now, palm, cingular, and apple don't know, so I'm asking the community.
How can I get some if not all of the bluetooth services that are suppossed to be there back?(other then reverting, which may not be possible anyway)
I am assuming it is from a Cingular Firmware Update, but there must be a way to write a bluetooth extension file, maybe a .prc, with the supported bluetooth profiles to load on the treo. Also is there some way to check the apple bluetooth services available?
I am just frustrated at the lack of response, support, from these companies.When I called cingular, nobody knows anything, nor do they know who might. Its ussually the same with most tech support. I wish there was a private tech support company that knew what they were doing, and had access to drivers, software pogrammers, etc. I'd pay good money for all my devices to have custom care. O well, sorry for venting.

No. I can't believe the lack of bluetooth services on this phone. My sony erickson T637 had everything. All I have been able to get is the access phone's data connection using bluetooth. But that only comes up half the time when pairing while dial up networking is on on the treo. The OBEX object push comes up on with dial up networking off, but I still have yet to find the sync with ical, etc.. stuff. Everthing seems to work, but you wouldn't know from pairing the two. My DUN still boots me off after a minute or so of no activity. Probably some cingular thing. Sorry I'm not much help, but I'm just a consumer with a bumb product and no support from any of the companies I bought it from.Good Luck

Similar Messages

Does Office365 EWS provides Push Notification service for Contacts and Calendar Events?

Even though there are REST API's for performing PUSH and PULL operations for Office365(online), I am still looking the old EWS approach where in I want to subscribe for PUSH notification service for Contacts, Calendars and Mail Boxes.
Can any one suggest if there is a way to achieve this.

I posted an answer in your Stack Overflow post.
http://stackoverflow.com/questions/27837887/does-office365-ews-provides-push-notification-service-for-contacts-and-calendar/27844747#27844747

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

Trial for the subscription services for ExportPDF and PDF Pack?

Is there a way to get a trial for the subscription services for ExportPDF and PDF Pack?

I've moved your question to the PDF Pack forum for best answer.

Problem with bluetooth pairing with BB 8100 and Jag after loading Helper App

Hi,
There is a Pairing Helper App available for the BB 8100 to assist with pairing on Jaguars or
Land Rovers, which I've downloaded. It seems as though the BB is finding my car -
but the car isn't finding the phone. Any ideas?

The helper has worked when I have used it in the past, its unfortunate it isnt working for you. The other topic on here I believe was issues with 4.2.1 code, and devices with 4.2.0 work fine, RIM is aware and working on it apparently.
Keep in mind car bluetooth is finicky for whatever reason, no matter the device or car model.
www.novawirelessconsulting.ca

MARS - NFS on Unix Services for Windows and deleting files

Hello !
I've prepared NFS server on W2k3 server with Unix Services for Windows installed. It works OK, the only problem is moveing/deleting files and folders. It seems like a problem with permissions for anonymous user. Does anybody have similar experience ?

If you receive the following error message "Error ./pnarchiver Thread 2051:PN-0102:SQL error: ORA-01005: null password given; logon denied" then there is a Problem with archiving to NFS server. The directories for the archiving are properly created on the server but those directories remain empty. The workaround is that an inter operability issue exists between MARS and CygWin NFS server running on Windows 2003 server. To work around such inter operability issues, replace the NFS server with Microsoft Windows Services for Unix.

GOS(Object Services) for ME31K and ME41

Hi,
Is it possible to have a General object services for the transactions ME31K and ME41.If yes,Can you please give me the procedure for the same.
Thanks

the notes for ME31K: start with [329437|https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=329437&nlang=EN&smpsrv=https%3a%2f%2fwebsmp110%2esap-ag%2ede] and work your way through the dependencies and follow-ups.
ME41: there's no way to know beforehand. either you can see it while you are using the transaction or you can't. if you can't you go searching service.sap.com ... at least that's how i do it ...

Installing NT service for app and process scheduler (Windows 2003)

I have followed the install guide instructions for creating an NT service for the process scheduler, however, whenever I attempt to start the service I receive the following warning message:
The PeopleSoft H:\apps\psoft\PT849 service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service.
The service does not start properly, however when launching the services via psadmin, both the app and process scheduler processes start properly.
Any assistance would be appreciated.

I have followed the install guide instructions for creating an NT service for the process scheduleWhat are the doc you've followed ?
It is well explained here below :
http://download.oracle.com/docs/cd/E05406_01/psft/acrobat/hwtools849_itora.pdf
Task 10A-5: Starting Process Scheduler as a Windows Service
Furthermore, describe what steps have been done.
Nicolas.

Difference between usage of "System -- Services for object" and GOS direct

Hey folks,
i was wondering if you know an answer for that problem:
1) Start ME23N (no SAP Gui classic design!) and go to System - Services for Objects in order to start the GOS Toolbox. Try to to store a business document. In my case i don't have the authorisation S_WFAR_OBJ so i get the Message no. 00398 "You do not have authorization for this function" Thats the behavior a want
2) Start ME23N and activate GOS Toolbox by clicking directly on the button on the top left corner. Try to a store a business document. But there is no message coming up?! Same user, same PO! It seems that the Toolbox is just beeing restartet and thats it.
Same behavior in IW53/IW33 too, no auth error message if GOS is started via "System --> Services for Objects".
Thats our system:
ERP ECC 6.04 with NW 7.01
SAP Gui 7.20 PL 3 (signature design)
Thanks for your help and best regards
Olli
Edited by: Oliver Grewenig on Jan 18, 2012 11:30 AM

Hi Oliver,
I have done a similar testing for Tcode FB03 since I have done Archivelink configuration for this FI object.
Case 1:
=======
Start FB03 (no SAP Gui classic design!) and go to System - Services for Objects in order to start the GOS Toolbox. Try to to store a business document. In my case i don't have the authorisation S_WFAR_OBJ so i get the Message no. 00398 "You do not have authorization for this function"
Case 2:
========
Start FB03 and activate GOS Toolbox by clicking directly on the button on the top left corner. Try to a store a business document. Still got the same error message "You do not have authorization for this function".
Later I added the required object in the authorization profile and it worked in both the cases mentioned above.
Since the same program is being executed behind both the cases, it will check the same authorization object as designed.
What I would suggest is that you perform this test again and ensure that no one modifies the authorization during your testing period.
Regards,
Deepak Kori

Relationship btwn Virtual Host Services for Groups AND WorkGroup manager??

Can someone please explain the relationship between Virtual Host Services (as specified in the Sites section of Server Admin) AND "Enable the following services for this group on ... and the options"?
And where does one go to "create wikis on this site" when one is give the authority to do it in Server Admin > Sites > Services for Groups (Allow the following to create wikis on this site)?*
Finally, why do all my groups seem to show up on all my virtual hosts, even though they are only enabled on a particular site?
Thanks in advance for any assistance. Hopefully any answers will help others with their efforts to understand this set-up.
Cheers,
Ashley.
* I'm assuming they mean actually create new wikis rather than just add pages to the current one.

Thanks Angus, I see that error too.
I understand that Virtual Sites are web-related Apache settings. So, I guess the "Services for Groups" functionality there-in (Sites > Web Services) is just to indicate that this virtual site can have wikis, calendars, blogs etc.
I also understand what a Group is but I am confused as to how they relate to wikis (especially when the config item (Sites > Web Services again) says "allow the following to create wikis (plural) on this site" - my emphasis).
Is it saying that from all the users/groups only the following users/groups can turn on a wiki which will run on this virtual site? For me it sounded like a user/grous could create multiple wikis. So I would like to know if wikis are one-to-one with users/groups?
Cheers,
Ashley.

Ics broke bluetooth to auto for calls and audio playback

After upgrading to ICS (4.0.4) on my RAZR MAXX, I can no longer maintain a bluetooth session with my car and the audio playback is not working at all. The connection begins and drops after less than 1 minute. This cycle repeats. Calls and audio worked with the same car configuration in Android 2.3.4. After a long search on the net I learn that this is a common problem. Has anyone heard about a patch or work around? I tried disabling wifi - no joy.

I have the same problem with my DROID RAZR. I use a Plantronics Pro+ headset and regularly have hour long conference calls. I had no connection problems prior to ICS. When I upgraded to ICS, the Bluetooth connection started dropping. It will drop then reconnect, then drop, then reconnect, every couple minutes. I end up holding my phone to one ear with the Bluetooth on the other, the call rotates between them. VERY ANNOYING. UNACCEPTABLE. I tried a second Bluetooth headset (also Plantronics Pro+). it worked for about 2 days, then had the same problem.
From reading various postings, I believe this is a problem with ICS and the Bluetooth connection. Nothing to do with what type of headset, automobile, etc. It may be only those of us that had Android 2.3.4 and upgraded to ICS.
BobR

Oracle10g Services for MTS and Oracle 9i

Hi,
I would like to know if Oracle10g Services for MTS 10.1.0.4.0 is compatible with Oracle 9i?
Can i enlist 10g + 9i servers at the same transactions?
Thanks
David

Vista. Are you using ODAC for Windows Vista?
Found here:
http://chanmingman.spaces.live.com/?_c11_BlogPart_BlogPart=blogview&_c=BlogPart&partqs=cat%3d.Net
look for "Oracle Database and ODAC for Windows Vista"
or
ORA-00161: transaction branch length string is illegal (maximum allowed string)
Cause: An external transaction branch ID with a length either too large or 0 was passed in.
Action: Report the problem to your external transaction coordinator vendor.
or
I also found a newer doc in Metalink: Note:400831.1 but this is for 9.x so might not apply to you.
Good luck
Ming Man

We are getting calls from "peoples connect u.s.a." telling us they are providers of service for Microsoft and Macintosh. They have been informed our computer has informed them our drivers are in going to crash. legit. We think they are bogus. Right?

Does anyone else get calls from "Peoples' Connect U.S.A." indicating they have received error signals from our computer that that all drivers are going to crash and that our system is at high risk?

I get about one a day, usually saying our Windoze computer is infected (we don't have a Win computer). I cheerily thank then for calling and say I need to transfer them to our IT manager (I'm a home user so no such thing), lay down the phone near a radio with elevator music, and go about my business.
One person reported here within the last month that they fell for the trick. The callers ended up with $600 of her money for something that did not need fixing. They also ended up with her credit card number, her phone number, and her e-mail address. They had a good day; she didn't.
As most of these calls come from overseas (I call them "Mike from Mumbai" calls), the FCC can't do much but wring their hands. They've not been able to stop the "Rachel from Cardholder Services" robo-calls that have been plaguing US households for nearly a decade.

MSDTC, Vista, Oracle Services for MTS and TransactionScope

Hi there,
We're using .NET 2.0 TransactionScope on a Vista client. By default this will create a distributed transaction using MTS which will then be proxied using Oracle Services for MTS. However we consistently get the following error:
ORA-00161: transaction branch length 100 is illegal (maximum allowed 64).
According to this thread http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=943955&SiteID=1 Microsoft made some changes in MSDTC in Vista which are likely to have caused this problem. They say they were co-ordinating with Oracle to determine an appropriate fix.
Is this an acknowledged issue? Has it been fixed and if not, when will it be fixed?
Kind Regards,
Dean Ward

FYI, the following code reproduces the issue...
using (TransactionScope txScope = new TransactionScope())
using (OracleConnection oracleConnection = new OracleConnection("Data Source=Test;User Id=Test;Password=Test"))
oracleConnection.Open();
using (OracleCommand oracleCommand = new OracleCommand("SELECT 'Test' FROM Test", oracleConnection))
oracleCommand.Connection = oracleConnection;
using (OracleDataReader oracleDataReader = oracleCommand.ExecuteReader())
while (oracleDataReader.Read())
System.Console.WriteLine(oracleDataReader.GetString(0));
txScope.Complete();
}

Missing "Object Push" Service for Bluetooth/Blackberry on OS X

Hello. I had several issues that caused me to do a "wipe data" on my Curve. After I set everything back up, my Bluetooth is not working properly. I have my Curve paired to my my desktop and my laptop.
I am able to successfully send photos from my Curve to my laptop.
When I try to send something from my Curve to my desktop, it "failed because it cannot find service." This worked fine before the wipe data.
When I check the "device properties" in the "paired devices" menu, the desktop computer device is missing a "service" called "object push." Verizon and RIM have not been much help.
Any suggestions?

Found the problem. (I feel like a dope.) I needed to turn on Bluetooth Sharing in the "Sharing" prefs pane. That made the "Object Push" service available to the device.

Missing Bluetooth Pairing Services for Treo650 and 15"1.67Albook(1.4.3)

Similar Messages

Maybe you are looking for