Missing Bluetooth Services

I am trying to pair my Zire 72 with my laptop with Bluetooth. On the Zire 72 I get a dialog box saying "Missing or incorrectly installed Bluetooth services." How can I fix this problem. I can't run the bluetooth pairng setup.
Thanks,
Andrew
Post relates to: Zire 72

Hi, I have a similar problem with my TX. I can pair it with a cellphone, I can receive a file via Bluetooth, but when I try to send a file (with no lock), I don't have any dialog box to chose the way to send it.
When I want to send a file via Documets to Go, I have a error message : "the operation could not be completed. There may be no transmission service provided or there may be no available receiving application for this type of data"
When I want to send a file via FileZ, I have a error message : "Error:exg:Target Missing in item::send VFSFile() a" puis "An error occured and the item could not be sent".
Whan I want to send via menu App-> Send, no dialog box. I stop the program and do again menu APP-> Send and the Palm reboots.
I soft reset with no change, and I don't what to hard reset if possible. Can someone tell the files/programs on the palm which control this service so I can check if I have them still on my device.
Regards

Similar Messages

Missing Bluetooth Pairing Services for Treo650 and 15"1.67Albook(1.4.3)

Hi,
When I got my Treo650 originally I ran bluetooth setup assistant and when paired, sync with ical, adress book, use phones gprs connection, etc... were listed as bluetooth services supported. After some upgrade, not sure which one,(treo/OSX) there are no services listed when I run bluetooth setup assistant. How can a treo 650 not have any supported bluetooth services?
Now, palm, cingular, and apple don't know, so I'm asking the community.
How can I get some if not all of the bluetooth services that are suppossed to be there back?(other then reverting, which may not be possible anyway)
I am assuming it is from a Cingular Firmware Update, but there must be a way to write a bluetooth extension file, maybe a .prc, with the supported bluetooth profiles to load on the treo. Also is there some way to check the apple bluetooth services available?
I am just frustrated at the lack of response, support, from these companies.When I called cingular, nobody knows anything, nor do they know who might. Its ussually the same with most tech support. I wish there was a private tech support company that knew what they were doing, and had access to drivers, software pogrammers, etc. I'd pay good money for all my devices to have custom care. O well, sorry for venting.

No. I can't believe the lack of bluetooth services on this phone. My sony erickson T637 had everything. All I have been able to get is the access phone's data connection using bluetooth. But that only comes up half the time when pairing while dial up networking is on on the treo. The OBEX object push comes up on with dial up networking off, but I still have yet to find the sync with ical, etc.. stuff. Everthing seems to work, but you wouldn't know from pairing the two. My DUN still boots me off after a minute or so of no activity. Probably some cingular thing. Sorry I'm not much help, but I'm just a consumer with a bumb product and no support from any of the companies I bought it from.Good Luck

My new backbeat GO 2 is not recognized by bluetooth service on my ipad mini with ios 7.0.4! Could you help me?

My new backbeat GO 2 headset is not recognized by bluetooth service of my new ipad mini with ios 7.0.4! It doesńt appear in the list of bluetooth devices. It was working on previous versions! What happens? Could someone help me? Thanks!

There are a ton of posts on this already if you search the forums.In short...
Delete all Bluetooth profiles from your device. Do the same if your Bluetooth devices allow for that.
Setting > Reset Network Settings
Reset your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Repair your devices
Try again to see if the problem persists.

SAP Service named SAP SID _ Instance Number is missing in services.msc

Hi,
SAP Service named SAP<SID>_<Instance Number> is missing in services.msc
Example :
SID = DM0
Instance Number = 01
SAP Service Name = SAPDM0_01
Please help me to resolve the issue.
Thanks in Advance.
Warm Regards,
Sathya

SAPSTARTSRV.EXE
Values :
Operation Selected is "Install Service + Register COM Interface + Start Service"
SID = DM0
NR = 00 or 01
Startprofile = D:\usr\sap\DM0\SYS\profile\START_DVEBMGS01_sapserver
User = DOMAIN\SAPService<SID>
Password = ....
Now the SAP Service, SAP<SID>_<Instance Number> is created in services.msc.
Thanks www.sdn.sap.com
Edited by: Sathya Kala Veeraraj on May 6, 2010 12:12 AM

Missing bluetooth opt

missing bluetooth option on my laptops, how can I go about it.

PLease provide us more information like your model number, more info about issue, history, etc.
Meanwhile, Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

N95 bluetooth services, and firmware

Phone: N95
Firmware: 10.0.018
Nokia PC Suite: 6.81.13.0
Problem:
- I am trying to use N95 as a bluetooth control for my PC. There is a Java software (Moccatroller) that has server/PC Java application and client/phone applcation. However, I can not establish valid (serial?) connection with that server application via bluetooth. On the other hand, PC Suite works fine: synchronising, transfer of music and pictures, etc - works perfectly.
I am not using Bluesoleil, but I tried it because i wanted to see if i can discover where is the problem. using Bluesoleil I could not find any bluetooth services of myu N95. It says something about not being able to detect any services from my N95. Other phones work ok and have servces such as object push, serial com, etc. Then, I unistalled Bluesoleil and tried to see if some services are available from classic b.tooth software (? one that came with PC Suite or my btooth USB dogle). However, only DUN service is available with my N95. I tried with other phone, and one more service was availabe - Serial Port (SPP) COM11. I believe that is the service i need to run the remote control software i mentioned in previous paragraph.
Questions:
1. Is this the normal behaviour of N95?
2. How can I make more bluetooth services available from my N95 (specially serial port)?
3. Will firmware upgrade solve my problem?
4. What are new features and improvements in firmware 12 compared to version 10 that i have installed.
Thank you for the answers.

It's been a while since you posted this, so you have probably already stumbled on this solution.
I have a Jabra Cruiser rather than a Jabra Freeway, but I expect the same trick will work.
When I get out of my vehicle, I slide the switch on the Jabra to the off position. When I return to the vehicle, my BlackBerry automatically connects to the BlackBerry Music Gateway when I start the vehicle. When I turn on the Jabra after that, it autoconnects. Music goes to the Gateway, but phone calls go to the Jabra.

Manual Billing is missing for service period 06/19/2009 u2013 7/21/2009

HI
Can anybody help me to fix the below issue?
Issue: The Manual Billing is missing for service period 06/19/2009 u2013 7/21/2009 for contract 9018967003.
After completing the Billing and invoicing using EASIBI t-code and looking at the refreshed ES32, i found that Manula billing is missing for service period 06/19/2009 to 07/21/2009.
thx
DGR

Hi,
It seems you have processed normal billing and invoicing process.
If the individual invoicing process is successful, the invoicing document should get created and posted unless outsorted.
In your case, if the invoicing document is outsorted, you would be able to see the billing document. (in refreshed ES32 view as mentioned) .
For the billing document, you can check the invoicing document as well, when you display the billing document ... check the print document tab on the same.
If the invoicing document is visible and is not posted, it would be out sorted. Either check the EMMA tcode processing for the same as it seems, an EMMA case might have generated as you are unable to view the same in EA05.
Hope this helps!!
Regards,
Rajesh Popat

Intel Bluetooth Service View has stopped working

I have a Windows 7 laptop model dv4t-4000 CTO Entertainment Notebook PC (product number LH989AV) and I get this error message ("Intel Bluetooth Service View has stopped working") every time I try to connect to my Bluetooth Earbuds. The pairing seems to work fine, but there is NO SOUND in the earbuds, the sound continues to play from my PC speakers instead. Can anyone help? Please tell me how to fix this error message "Intel Bluetooth Service View has stopped working." Thank you!!!

Hello CathyJo
I am sorry to hear you are having issues with your Bluetooth not working. I would like to offer my assistance in this matter. I would recommend that you try the steps I have outlined below"
Step 1. Go to device manager
Step 2. Right click on "Bluetooth Peripheral Device" that you want
Step 3. Select "Update Driver Software..."
Step 4. Choose "Browse my computer for driver software"
Step 5. Choose "Let me pick from a list of device drivers on my computer"
Step 6. Select "Ports (COM & LPT)"
Step 7. Select "Microsoft" at "Manufacturer" list
Step 8. Finally select "Standard Serial over Bluetooth link"
If the above steps do not work I would recommend you read this thread concerning this issue on the Intel Forums.
I hope I have been able to provide you with the assistance you need. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Is it possible to know which bluetooth services are available with a MIDlet

...Bluetooth Services like Serial Port Support, Obex File Transfer, Dial-up Networking...
I've already try to search with "getProperty()" (api.version, n� max. of devices...) but it awlays return "null" !!!!. I'm a beginner in j2me BLUETOOTH. Thanks!

Varies from phone to phone.
I believe it is recommended to use a port between
16001 and 16999 on a J2me app as these are almost
always free.
In my opinion the best way to find out what will work
and what won't is to create a small app which will
try to create an SMS connection on a specified port
(specified through something like a textbox) and
which will display something indicative if an
IOException is thrown during the process of
creation.
Most manufacturers usually also have documentation on
this on their developer sites...hi i have a similar problem with they guy above
i have installed a camera network wich has acces to web from port 8080 i have access from any computer that has internet but when i connect with the java app provided from the cameras company it throws "java.lang.securityexception untrusted midlet attempted to connect to a restricted port" i was wondering if i change te port tha i connect will i have access from that program?? and if yes wich port should i use? i am asking because its not easy to have access to the router to change the port forwarding settings thank you in advance

Can someone hack into my MacBook Pro even it's not connected to the internet and both Wi-fi and Bluetooth services are off?

Hi,
Need to know if someone can hack into my MacBook Pro even if it's not connected to the internet and both Wi-fi and Bluetooth services are off? Can someone enter my system even if the settings at System Preferences > Sharing are all off?

Jose Alessandro wrote:
Need to know if someone can hack into my MacBook Pro even if it's not connected to the internet and both Wi-fi and Bluetooth services are off? Can someone enter my system even if the settings at System Preferences > Sharing are all off?
Yes,
Through Bonjour, Apple's open source zero configuration networking.
https://developer.apple.com/bonjour/
http://flylib.com/books/en/2.434.1.105/1/
And you can't turn it off or your computer won't work, however saving grace is the hacker has to be pretty close to your machine to do it.

Hyper-v 2012 missing vhdsvc service

I have a new Hyper-V server that is missing two services
vhdsvc and nvspwmi
How can I get these two pieces installed?

Hi IMSU,
I assume that you are running server 2008 r2 .
For the two services you mentioned , please refer to following links :
http://technet.microsoft.com/en-us/library/ee941120(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/ee956892(v=ws.10).aspx
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Need help abt bluetooth services on windows 8 enterprise

glad to join hp forums and thats help me too much persoanlly also at work
got problem in bluetooth services nd iam using windows 8 enterprise all bluetooth services was working well on windows 7 professional but i upgraded ma os nd now just i can send and recive files via bluetooth , cant play music directly too , i got screen shot thats will explain more :
thats what i need i got this screen shot from help its full services i got just one option its file transfer
and this is what i got right now
need help i like win 8 more than 7 so i wont back to use win 7

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Creating a bluetooth service

I'm trying to create a bluetooth service but I'm not sure what is required in the .plist they want me to load into IOBluetoothSDPServiceRecord. Does anyone have an outline or a guide. The documentation isn't help me out much here.
Thanks.

However, I was hoping someone could save me some time.
You had to go there, didn't you Again, what I'm hearing is...
"I'm not eager enough to spend my time, but I'm brash enough to take advantage of someone who has!"
The more effort you express, the more effort those who've already been done the road may feel like donating...don't insult those types by walking up and asking for a handout right off the bat.
Same goes for blaming the docs - it's amazing how many first posts contain that refrain, like it's an original excuse, when forum regulars hear it over and over and recognize it for what it is - an excuse for not wanting to do the work - just get the code from someone else and collect the money.
Everyone gets tired of people blaming something else as an excuse for their not being able/willing to man up and do at least a bit of work on their own.
Lots of people do this from time to time, but please at least try to not be so blunt on your first visit..._try to hide it - try to show some effort_ of some sort, ok?
If you have some good info and perhaps share that first, others will be encouraged to exchange...you're on the right track with that. Good luck in any case.

Missing Bluetooth Components on my Palm TX

I recently started getting a (Sys5050) (0,841) error message on my palm TX. I followed advice from this blog community and performed a warm reset and it took the problem away. Yea!
Not so yea! Now I find out when I want to connect to the web via Bluetooth that I am "Missing Bluetooth Components" and that I should reinstall the software.
What software? The Bluetooth came with the TX. HELP! PLEASE!
Thanks in advance
Bruce
Post relates to: Palm TX
This question was solved.
View Solution.

Then your next task is a Hard Reset. This will erase the device, and reload all the original software.
Once the Hard Reset is complete, test the BlueTooth radio to see if all is better. If so, do a Hotsync and see if the problem returns. If it returns, we'll try something different.
To perform a Hard Reset: (Palm Knowledgebase article #887)
http://kb.palm.com/wps/portal/kb/common/article/887_en.html
While pressing and holding the Power button down, tap and release the Reset button in back and continue to hold the Power button down. When the grey Palm logo appears, you can release the Power button.
You should now see the warning page in about 5 languages. Press the UP direction on the 5-way pad to complete the task. Your Palm will reset itself several times as it re-installs the original programs and erases all your previous data.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

IPod Touch no recovery posibel "unable to find bluetooth service" ?????

Hi
i have a ipod touch....
Best regards
Frank
[libusbrestore: 0xEC4, 23:20:27.453] => <Recovery Mode Device 01EBA690>: operation 3 progress -1
[libusbrestore: 0xEC4, 23:20:27.531] => <Recovery Mode Device 01EBA690>: operation 4 progress -1
[libusbrestore: 0xEC4, 23:20:28.046] => <Recovery Mode Device 01EBA690>: operation 5 progress -1
[libusbrestore: 0xEC4, 23:20:30.796] => <Recovery Mode Device 01EBA690>: operation 6 progress -1
[libusbrestore: 0xEC4, 23:20:30.343] => <Recovery Mode Device 01EBA690>: operation 7 progress -1
[libusbrestore: 0xEC4, 23:20:31.656] => <Recovery Mode Device 01EBA690>: operation 8 progress -1
[libusbrestore: 0xEC4, 23:20:31.703] => <Recovery Mode Device 01EBA690>: operation 9 progress -1
[libusbrestore: 0x528, 23:20:36.734] => WinAMRestore::OnInterfaceRemoval: \\?\USB#Vid05ac&Pid1280#6&15ed10f9&0&5#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB2102
[libusbrestore: 0x528, 23:20:36.812] => WinAMRestore::RemoveAppleDeviceFromDeviceList: \\?\USB#Vid05ac&Pid1280#6&15ed10f9&0&5#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB2102
[libusbrestore: 0x528, 23:20:36.859] => AppleDevice::NotifyDisconnect: APPLEDEVICETYPERECOVERY
[libusbrestore: 0x177C, 23:20:36.187] => <Restore Device 0575D168>: operation 3 progress -1
[libusbrestore: 0x177C, 23:20:36.250] => <Restore Device 0575D168>: operation 4 progress -1
[libusbrestore: 0x177C, 23:20:36.296] => device information response = <CFDictionary 05772E88 [6732D030]>{type = mutable, count = 6, capacity = 17, pairs = (
7 : <CFString 0579FC48 [6732D030]>{contents = "NORImageVersion"} = <CFNumber 057ABAF0 [6732D030]>{value = +2, type = kCFNumberSInt64Type}
9 : <CFString 0576CB20 [6732D030]>{contents = "RestoreProtocolVersion"} = <CFNumber 05766548 [6732D030]>{value = +10, type = kCFNumberSInt64Type}
13 : <CFString 05767370 [6732D030]>{contents = "Type"} = <CFString 05770098 [6732D030]>{contents = "com.apple.mobile.restored"}
15 : <CFString 0576CB48 [6732D030]>{contents = "SerialNumber"} = <CFString 0576C7C0 [6732D030]>{contents = "XXXXXXXXXXX"}
19 : <CFString 057AE2A0 [6732D030]>{contents = "HardwareModel"} = <CFString 0576AB20 [6732D030]>{contents = "N45AP"}
20 : <CFString 0575CFD8 [6732D030]>{contents = "Result"} = <CFString 0576C840 [6732D030]>{contents = "Success"}
[libusbrestore: 0x177C, 23:20:36.375] => <Restore Device 0575D168>: operation 28 progress -1
[libusbrestore: 0x177C, 23:20:36.453] => <Restore Device 0575D168>: operation 11 progress -1
[libusbrestore: 0x177C, 23:20:37.625] => <Restore Device 0575D168>: operation 12 progress -1
[libusbrestore: 0x177C, 23:20:41.531] => <Restore Device 0575D168>: operation 12 progress -1
[libusbrestore: 0x177C, 23:20:47.015] => <Restore Device 0575D168>: operation 13 progress 0
[libusbrestore: 0x177C, 23:20:57.109] => <Restore Device 0575D168>: operation 13 progress 1
[libusbrestore: 0x177C, 23:21:04.953] => <Restore Device 0575D168>: operation 13 progress 5
[libusbrestore: 0x177C, 23:21:04.093] => <Restore Device 0575D168>: operation 13 progress 6
[libusbrestore: 0x177C, 23:21:04.390] => <Restore Device 0575D168>: operation 13 progress 100
[libusbrestore: 0x177C, 23:21:04.437] => <Restore Device 0575D168>: operation 14 progress -1
[libusbrestore: 0x177C, 23:21:04.453] =>
==== device restore output ====
*unable to find bluetooth service*
*unable to find baseband service*
entering waitfor_storagedevice
entering createfilesystempartitions
executing /sbin/newfs_hfs
Initialized /dev/rdisk0s1 as a 300 MB HFS Plus volume
executing /sbin/newfs_hfs
Initialized /dev/rdisk0s2 as a 7444 MB HFS Plus volume
entering restore_images
executing /usr/sbin/asr
Waiting for connection attempt from server
Validating target...done
Validating source...done
Warning: the target volume may not be bootable
Erasing target device /dev/disk0s1...done
Retrieving scan information...done
Validating sizes...done
Restoring
*Could not restore - error 1000*
==== end of device restore output ====
[libusbrestore: 0x177C, 23:21:04.468] => _AMRestoreModeDeviceFinalize: 0575D168
[libusbrestore: 0xE94, 23:21:05.906] => _AMRecoveryModeDeviceFinalize: 01EBA690
[libusbrestore: 0x528, 23:21:09.906] => WinAMRestore::OnInterfaceArrival: \\?\USB#Vid05ac&Pid1280#6&15ed10f9&0&5#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB2102
[libusbrestore: 0x528, 23:21:09.937] => WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#Vid05ac&Pid1280#6&15ed10f9&0&5#{ed82a167-d61a-4af6-9ab6-11e52236c576}\IB2102
[libusbrestore: 0x528, 23:21:09.968] => AppleDevice::NotifyConnect: APPLEDEVICETYPERECOVERY
Message was edited by: Damon M.
Removed serial number.

Hi kfresh
Their some problems with my ipod touch
- After sync sometimes he loses all music on the ipod
- Another problem itunes or the ipod doesn’t sync new music (bought in the itunes store, in itunes and ipod nano it runs fine), the new music is on the ipod but i cant play it.
- I have tried some user profiles on my windows xp system, always the same thing
(test with different user application data, check for a config error)
After a recovery, he put all songs on the ipod touch, they are complete..
Since today the recovery doesn’t run and my ipod touch is in maintenance mode.
Frank

Missing Bluetooth Services

Similar Messages

Maybe you are looking for