Missing: Bluetooth with Enhanced Data Rate for vista
I was looking for the "Bluetooth with Enhanced Data Rate Software II" for vista
After I found the right page (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67250), it seem their is no link to the setup file
Any ideas?
glev55's link to the x6x Vista drivers is also fixed now.
Thanks to whoever reported it through Site Feedback!
I don't work for Lenovo. I'm a crazy volunteer!
Similar Messages
-
All,
There have been reports that when upgrading the Bluetooth with Enhanced Data Rate Software II for Windows 7 to version 6.4.0.1700 is causing a wipe on the main OS drive (commonly C:\)
Version:
6.4.0.1700
Release Date:
2011/05/16
Affected units which uses this version of driver are as follows.
Support models ThinkPad L420, L421
ThinkPad L520
ThinkPad T420, T420i, T420s, T420si
ThinkPad T520, T520i
Thinkpad W520
ThinkPad X1
ThinkPad X220, X220i, X220 Tablet, X220i Tablet
ThinkPad Edge E220s
ThinkPad Edge E420, E420s
ThinkPad Edge E520
Issue has been raised to engineering and the team are currently working on it.
****Please do not update the Bluetooth driver until further notice****
We are in a process of pulling the driver off the Support Site and ThinkVantage System Update
Main thread discussion here
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD
Solved!
Go to Solution.All,
Updated drivers have been released to the web team and should be published in the next couple of days.
Will update this thread once they are live - the official solution will be to use the newer drivers.
mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Windows Proximity Un/Lock using ThinkPad Bluetooth with Enhanced Data Rate Software
While installing the driver for ThinkPad Bluetooth with Enhanced Data Rate Software, the installer asks whether I want to include additional features such as Windows Proximity Un/Lock, file transfer, and others. However, after installing, I cannot find the Proximity Un/Lock option anywhere.
Can someone please enlighten me as to how I can activate this built-in feature? THANKS!
-RajHi
Welcome to Lenovo Community
You can directly download and install this package . It will not do any harm to any other component of Operating System
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70042
Hope This Helps
Cheers!!! -
ThinkPad Bluetooth with Enhanced Data Rate Software Problem
I'm having a weird issue. I use a X200t tablet with Windows 7 Profession 64-bit.
Apparently my current "ThinkPad Bluetooth with Enhanced Data Rate Software" is Version. 6.2.1.2900.
Thinkvantage System Update wants me to download and install Version 6.2.1.3100.
However, it tries and I get Error 1935 and it rolls back. Now when I start windows I get an alert about BTTray.exe not loading.
Of course I searched this problem, but it seems to be some ancient thing (years old) and I've never had a problem before with any of the Bluetooth updates.
I did notice that in past versions people said when they tried to uninstall the old version and install the new one, it just wiped their hard drive. I don't want to risk that so I thought I'd check here if anyone knew what was going on.
Thanks!Hi
Welcome to Lenovo Community
You can directly download and install this package . It will not do any harm to any other component of Operating System
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-70042
Hope This Helps
Cheers!!! -
Can't install Bluetooth Enhanced Data Rate Software II
Can't install Bluetooth Enhanced Data Rate Software II. When I try to install the software it says that there are no Bluetooth in my notebook, but it present in my configuration:
0A69630
SBB INTCR I7-2620M PROC USB3.0
45M3092
VBB GENWIN7HOMEPREM64
0A59833
SBB GEN WIN7 HOME PRM64 EN
0A69642
SBB 12.5PRMHDLDBCLTDPYMBBBRDAN
45M4574
VBB 8GBPC3-10600DDR3 1333SODMM
45M4839
SBB KEYBOARDUS ENGLISH
0A69643
SBB FINGERPRINT READER
0A69657
SBB CAMERA, HD 720P
0A69654
SBB 320GB HRDDSK DRV,7200RPM
0A68287
SBB NO MSSDRIVE
0A69647
SBB TP BATTERY 29++(9CELL)
41W1787
SBB CPK NORTH AMERICA
0A68261
SBB BLUETOOTH 3.0
45M4805
SBB IN.CENTADV.-N+WIMAX 6250
0A68257
SBB INTMBBRD GB3000 3G GPS
44C7986
SBB SIM CRD ATNT: USA
0A69659
SBB LANGUAGE PACK US ENGLISH
X220, IPS, Intel Core i7-2620m, 8 gb, Samsung 840 pro 256 gb, eGPU + Zotac AMP GeForce GTX 670.
Solved!
Go to Solution.EvgenyP schrieb:
(in BIOS bluetooth option is "enabled")
In BIOS under "Security" - "I/O Port Access", too?
If it is so, press in the BIOS the keys Fn-F5 exactly one time (nothing visible will happen). End BIOS with F10 - yes and turn off the computer after the display backlight has turned off.
After starting the computer bluetooth should be active and the driver can be installed.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection -
When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.
What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help -
Need help with enhanced data source in Production system
Hello Gurus,
1. I enhanced a datasource in BW and populated the field using customer exit using CMOD function. In Dev system, i dont have much data, so I deleted the whole data and did full load.
what shud I do in Production side, so that Delta wudnt be affected??since in production, we have millions of records, we wont do full load., what is the best way to populate the field in production after transporting the datasource to production without disturbing delta's, to reflect the new field for previous years data???
2. can we put 0customer and 0material in the same dimension?? how its going to affect the performance?
Thanks in advance.,
Best Regards,
PavanHi,
Please see this
1.
see this thread
populated the new field with historic data
2. can we put 0customer and 0material in the same dimension?? how its going to affect the performance?
Its better not to use them in a single dimension because one customer and take more than one material so if you have 100 customer and 1000 materials this combination will generate a large number of records. Its always better to keep characteristic which are having 1:N relation ship in one dimensional in you case customer and material will have an M:N type of relationship.which will result in slow performance.
Regards,
Ravi -
Open Item interest calculation with different exchange rate for each line
Dear All
We have a short term loan facility with our Bank. We take short term loan with bank on different terms and condition. Now user has requirement to have different interest rate for each open items depending on the posting date or any other condition. I think in SAP for one bank account only one rate is applicate for validity from date.
Can someone share his/her experience if got the same requirement from user
Thanks and Best Regards
Farhan QaiserDear Ashwin,
As of overdue days are concerned there is no standard functionality available whereas there is for amount.
Better solution is that you get an ABAPer create your own functional module. That will help you in better way. -
Best Data Rate for Export to DVD as Quicktime Movie
Hello - hope someone out there can help me!!!
I put together a slideshow for my high school reunion using iMovie HD 5.0.2 and need help with settings exporting it as a Quicktime movie.
*I want to export it to a DVD* so that I can play it on a friend's laptop and I'm not sure if iDVD would be the way to go - my friend has a Macbook Pro I can borrow so it might be okay - I am worried about the fact that I've been working on older software. (I have read about opening iDVD and bringing in iMovie project vs. "share to iDVD"). So they suggested instead of iDVD I just export as a quicktime. Then I can burn it in Toast (v.6.0.2)
Wondering about *BEST DATA RATE?*
In export settings I have:
compressor set at H.264
frame rate: current (should that be DV-NTSC?)
key frames: automatic (?)
encoding: best quality/multi-pass
should data rate be automatic?
Some details that might be relevant to helping me:
*Stills brought in as clips with cross-dissolves, only two uses of "Ken Burns effect"
*Some stills were in the project from my LAST reunion - I realize I should have reimported all the stills since I am now recompressing them, but it's too late now!
*no audio
*Slideshow is about 45 mins long, file size says 5.52GB although when I looked into exporting it last night it said 9+GB - not sure why
*Using a G4 Tower (not my ancient laptop) with OS 10.4.11, Dual 533MHz PowerPC, 1.5GB SDRAM
iDVD version is 6.0.4
please help if you can!! thank you in advance...Are you trying to burn a standard DVD or are you trying to put a QuickTime .mov file on DVD media?
A standard DVD doesn't worry about file size (only the duration).
A "data" DVD is limited to the type of media used. A single layer DVD is about 3.7 GB's.
In order to make a data DVD you need to keep the data rate low enough to not exceed the DVD media playback abilities. They can't handle the higher rates found in many of the preset options.
You can avoid all of these headaches by telling the viewer to "copy" the .mov file from the DVD to their Desktop. Then nearly any of the presets option will work.
H.264 is a great video codec and the "automatic" preset should work just fine. Use "multi-pass" for best quality (takes a very long time). Remove the check mark for "Audio" since your file has none. Leave it checked and you waste file size because a silent audio track would be added. -
When I take a look in the deployment guides I could see that I should not use data rates in the 802.11a network below 12mbit. We do not expect more than 6 calls and 8 phones on one access point but would like to raise the coverage by using 6mbit data rate. We could not place more access points. Is there someone with experience using lower data rates?
Using:1252 Access Points and WISM ControllerAllowing speeds from 6 Mbps can technically work, but the recommendation is also to avoid retries... the larger your cell, the more chances you have to have multipath issues making packets fail. With a voice deployment, if you have more than 1 % error rate, your MOS degrades below 4.1 (the quality of the call is affected and users start complaining that voice conversation is unstable, choppy etc).
So allowing 6 Mbps is fine, but the result will depend on the quality of your RF environment...
hope it helps
Jerome -
Looking for Data Rates for Apple AIC vs DV...
I've been looking around for a chart that compares the storage needed for an hour of AIC at the various qualities.
I found this: http://support.apple.com/kb/HT2704 Please point me to the place of AIC Knowledge.
Thanx from Roscoreading and writing the data shouldn't be the problem, its what you are doing with the data which will be taking all the time.
Try this
public class WriteFile {
public static void main(String... args) throws IOException {
String filename = "record.csv";
int records = 140 * 1000;
int values = 6;
long start = System.nanoTime();
PrintWriter pw = new PrintWriter(new BufferedWriter(new FileWriter(filename)));
for (int r = 0; r < records; r++) {
for (int i = 0; i < values; i++) {
if (i > 0)
pw.print(',');
pw.print(r * 10 + i);
pw.println();
pw.close();
long time = System.nanoTime() - start;
System.out.printf("Time to write %,d records was %.3f sec. file size=%.3fMB%n",
records, time / 1e9, new File(filename).length() / 1e6);
long start = System.nanoTime();
BufferedReader br = new BufferedReader(new FileReader(filename));
String line;
while ((line = br.readLine()) != null) {
// do some work.
String[] parts = line.split(",");
int[] nums = new int[parts.length];
for (int i = 0; i < parts.length; i++)
nums[i] = Integer.parseInt(parts);
br.close();
long time = System.nanoTime() - start;
System.out.printf("Time to read %,d records was %.3f sec%n",
records, time / 1e9);
PrintsTime to write 140,000 records was 0.462 sec. file size=6.193MB
Time to read 140,000 records was 0.792 sec -
Can I use Apple TV with unlimited data plan for my IPad without any other internet connection?
I Live in a weird area with no hardwired internet connection.
My only internet connection is my iPad Air's UNLIMITED DATA plan from AT&T... It's LTE and it works great for my usual work.
i Want to cancel stupid Direct TV acct and use Apple TV instead...
IS it possible to subscribe a TV account online by using my ipad air's unlimited data plan and watch in on my TV via Apple TV without using any other type of home network account?If you intend to use your iPads data plan then that will require use of the tethering/hot spot feature. As I said, you will not be able to use airplay, that needs a wifi LAN (home network). This may change with IOS 8, but won't know for sure until the release.
-
Dynamic Table UI Element with different data type for each cell
Hi Experts,
I have a problem with a dynamic Table UI Element in Web Dynpro ABAP. I have the following coding:
METHOD set_col_row .
TYPE-POOLS: icon.
DATA:
lv_node TYPE REF TO if_wd_context_node,
lv_node_info TYPE REF TO if_wd_context_node_info,
lv_element TYPE REF TO if_wd_context_element,
lt_attributes TYPE wdr_context_attr_info_map,
lv_table TYPE REF TO cl_wd_table,
lv_table_column TYPE REF TO cl_wd_table_column,
lv_text_view TYPE REF TO cl_wd_text_view,
lv_image TYPE REF TO cl_wd_image,
lv_text_edit TYPE REF TO cl_wd_text_edit,
lv_header TYPE REF TO cl_wd_caption,
attribute LIKE LINE OF lt_attributes,
lv_index TYPE string,
lv_cur_row TYPE i,
path TYPE string,
lv_value TYPE string,
attr_name TYPE string,
l_trc_point_id TYPE string,
l_num_cols TYPE string,
l_num_rows TYPE string,
lv_text TYPE string,
lv_index2 TYPE i,
lr_ress_selections TYPE REF TO /its/di_2_cpr_ress_selections,
lt_comp_tab TYPE cl_abap_structdescr=>component_table,
ls_comp_tab LIKE LINE OF lt_comp_tab,
lv_count TYPE i,
lv_col_count TYPE i,
lv_col_count_read TYPE i,
lv_index_read TYPE i,
lv_num_cols_minus_1 TYPE i,
lv_bind_lv_value TYPE string,
wd_standard_cell TYPE REF TO cl_wd_table_standard_cell,
lv_data_count TYPE i,
lv_data_count_str TYPE string,
wd_table_column TYPE REF TO cl_wd_table_column,
lv_column_id TYPE string.
FIELD-SYMBOLS:
TYPE ANY.
Instanz der Klasse /ITS/DI_2_CPR_RESS_SELECTIONS
lr_ress_selections = /its/di_2_cpr_ress_selections=>factory( ).
ASSIGN lr_ress_selections->gr_table->* TO gt_comp_tab.
ls_comp_tab-name = 'SUMME'.
APPEND ls_comp_tab TO lt_comp_tab.
ls_comp_tab-name = 'CELL_VARIANT'.
APPEND ls_comp_tab TO lt_comp_tab.
CLEAR ls_comp_tab.
l_num_rows = num_rows + 1.
CONDENSE l_num_rows.
l_num_cols = num_columns + 1.
CONDENSE l_num_cols.
UI-Element 'TABLE'
lv_table ?= wd_this->m_view->get_element( 'TBL_TABLE' ).
lv_table->remove_all_columns( ).
Kontext-Knoten 'TABLE'
lv_node = wd_context->get_child_node( 'TABLE' ).
lv_node_info = lv_node->get_node_info( ).
lv_node_info->remove_dynamic_attributes( ).
attribute-type_name = 'STRING'.
lv_num_cols_minus_1 = num_columns - 1.
Für jede Spalte einmal tun
DO lv_num_cols_minus_1 TIMES.
lv_index = sy-index + 1.
CONDENSE lv_index.
lv_table_column = cl_wd_table_column=>new_table_column( ).
lv_column_id = lv_table_column->id.
Spaltenüberschriften setzen
IF lv_index EQ 1. "Beim ersten Durchlauf --> erste Spalte = "Ressourcen"
lv_text = text-010.
sy-index = 0.
ELSE. "Danach für jede weitere Spalte eine Zeile aus der gt_comp_tab nehmen
lv_index_read = lv_index - 1.
READ TABLE lt_comp_tab INDEX lv_index_read INTO ls_comp_tab.
lv_text = ls_comp_tab-name.
lv_header = cl_wd_caption=>new_caption( text = lv_text ).
lv_table_column->set_header( lv_header ).
ENDIF.
CONCATENATE 'TABLE.A' lv_index INTO path.
lv_text_view = cl_wd_text_view=>new_text_view( bind_text = path ).
lv_table_column->set_table_cell_editor( lv_text_view ).
lv_table_column->bind_selected_cell_variant( 'TABLE.CELL_VARIANT' ).
lv_table->add_column( lv_table_column ).
wd_table_column ?= wd_this->m_view->get_element( lv_column_id ).
*****************Test Cell Variant*************************************************
IF lv_index GT 1.
LOOP AT .
IF sy-tabix EQ lv_cur_row.
Name zuweisen
ASSIGN COMPONENT 'NAME' OF STRUCTURE .
Zuweisen ob Blatt oder nicht
lv_element->set_attribute( name = 'NAME' value = lv_value ).
ASSIGN COMPONENT 'IS_LEAF' OF STRUCTURE set_attribute( name = attr_name value = lv_value ).
ENDIF.
ENDLOOP.
Now my problem is, that I need for every ROW of my table UI Element a different cell editor. I know how to change it for the column. But is not my issue. I want to have images (traffic lights red and green) in some rows. The other rows should have numbers. The coding works, so that I have all the data at the right place in my table, only the images are shown as a string, because the cells of these rows have the cell editor Text_View. I tried something with cell variants (with cl_wd_table_standard_cell), but it was not possible for me to get a cell variant "image" in these cells/rows were I need it.
I hope you understand my problem and now what to do here.
Thanks a lot in advance.
Best Regards,
IngmarHi Experts, I have a problem with a dynamic Table UI Element in Web Dynpro ABAP. I have the following coding: METHOD set_col_row . TYPE-POOLS: icon. DATA: lv_node TYPE REF TO if_wd_context_node, lv_node_info TYPE REF TO if_wd_context_node_info, lv_element TYPE REF TO if_wd_context_element, lt_attributes TYPE wdr_context_attr_info_map, lv_table TYPE REF TO cl_wd_table, lv_table_column TYPE REF TO cl_wd_table_column, lv_text_view TYPE REF TO cl_wd_text_view, lv_image TYPE REF TO cl_wd_image, lv_text_edit TYPE REF TO cl_wd_text_edit, lv_header TYPE REF TO cl_wd_caption, attribute LIKE LINE OF lt_attributes, lv_index TYPE string, lv_cur_row TYPE i, path TYPE string, lv_value TYPE string, attr_name TYPE string, l_trc_point_id TYPE string, l_num_cols TYPE string, l_num_rows TYPE string, lv_text TYPE string, lv_index2 TYPE i, lr_ress_selections TYPE REF TO /its/di_2_cpr_ress_selections, lt_comp_tab TYPE cl_abap_structdescr=>component_table, ls_comp_tab LIKE LINE OF lt_comp_tab, lv_count TYPE i, lv_col_count TYPE i, lv_col_count_read TYPE i, lv_index_read TYPE i, lv_num_cols_minus_1 TYPE i, lv_bind_lv_value TYPE string, wd_standard_cell TYPE REF TO cl_wd_table_standard_cell, lv_data_count TYPE i, lv_data_count_str TYPE string, wd_table_column TYPE REF TO cl_wd_table_column, lv_column_id TYPE string. FIELD-SYMBOLS: LIKE LINE OF lt_attributes, TYPE ANY TABLE, TYPE ANY, TYPE ANY, TYPE ANY. * Instanz der Klasse /ITS/DI_2_CPR_RESS_SELECTIONS lr_ress_selections = /its/di_2_cpr_ress_selections=>factory( ). ASSIGN lr_ress_selections->gr_table->* TO . lt_comp_tab = lr_ress_selections->gt_comp_tab. ls_comp_tab-name = 'SUMME'. * APPEND ls_comp_tab TO lt_comp_tab. * ls_comp_tab-name = 'CELL_VARIANT'. APPEND ls_comp_tab TO lt_comp_tab. CLEAR ls_comp_tab. l_num_rows = num_rows + 1. CONDENSE l_num_rows. l_num_cols = num_columns + 1. CONDENSE l_num_cols. * UI-Element 'TABLE' lv_table ?= wd_this->m_view->get_element( 'TBL_TABLE' ). lv_table->remove_all_columns( ). * Kontext-Knoten 'TABLE' lv_node = wd_context->get_child_node( 'TABLE' ). lv_node_info = lv_node->get_node_info( ). lv_node_info->remove_dynamic_attributes( ). attribute-type_name = 'STRING'. lv_num_cols_minus_1 = num_columns - 1. * Für jede Spalte einmal tun DO lv_num_cols_minus_1 TIMES. lv_index = sy-index + 1. CONDENSE lv_index. lv_table_column = cl_wd_table_column=>new_table_column( ). lv_column_id = lv_table_column->id. * Spaltenüberschriften setzen IF lv_index EQ 1. "Beim ersten Durchlauf --> erste Spalte = "Ressourcen" lv_text = text-010. sy-index = 0. ELSE. "Danach für jede weitere Spalte eine Zeile aus der gt_comp_tab nehmen lv_index_read = lv_index - 1. READ TABLE lt_comp_tab INDEX lv_index_read INTO ls_comp_tab. lv_text = ls_comp_tab-name. lv_header = cl_wd_caption=>new_caption( text = lv_text ). lv_table_column->set_header( lv_header ). ENDIF. CONCATENATE 'TABLE.A' lv_index INTO path. lv_text_view = cl_wd_text_view=>new_text_view( bind_text = path ). lv_table_column->set_table_cell_editor( lv_text_view ). lv_table_column->bind_selected_cell_variant( 'TABLE.CELL_VARIANT' ). lv_table->add_column( lv_table_column ). wd_table_column ?= wd_this->m_view->get_element( lv_column_id ). ******************Test Cell Variant************************************************** IF lv_index GT 1. LOOP AT ASSIGNING . ASSIGN COMPONENT 'TYPE' OF STRUCTURE TO . ADD 1 TO lv_data_count. lv_data_count_str = lv_data_count. CONCATENATE 'A' lv_index lv_data_count_str INTO path. wd_standard_cell = cl_wd_table_standard_cell=>new_table_standard_cell( view = wd_this->m_view variant_key = 'FLDATE' ). IF = '01' OR = '04'. lv_image = cl_wd_image=>new_image( bind_source = path view = wd_this->m_view ). wd_standard_cell->set_editor( lv_image ). wd_standard_cell->set_cell_design( '01' ). ELSE. lv_text_view = cl_wd_text_view=>new_text_view( bind_text = path view = wd_this->m_view ). wd_standard_cell->set_editor( lv_text_view ). wd_standard_cell->set_cell_design( '02' ). ENDIF. wd_table_column->add_cell_variant( wd_standard_cell ). ENDLOOP. ENDIF. ************************************************************************************* CONCATENATE 'A' lv_index INTO attribute-name. lv_node_info->add_attribute( attribute ). ENDDO. DO num_rows TIMES." Für jede Zeile einmal tun lv_cur_row = sy-index. lv_element = lv_node->create_element( ). lv_node->bind_element( new_item = lv_element set_initial_elements = abap_false ). DO l_num_cols TIMES. ADD 1 TO lv_col_count. IF lv_count LT 1. LOOP AT ASSIGNING . IF sy-tabix EQ lv_cur_row. * Name zuweisen ASSIGN COMPONENT 'NAME' OF STRUCTURE TO . "NAME lv_value = . * Zuweisen ob Blatt oder nicht lv_element->set_attribute( name = 'NAME' value = lv_value ). ASSIGN COMPONENT 'IS_LEAF' OF STRUCTURE TO . "NAME lv_value = . lv_element->set_attribute( name = 'IS_LEAF' value = lv_value ). ENDIF. ENDLOOP. ENDIF. IF lv_count GT 0. lv_col_count_read = lv_col_count - 1. lv_index = sy-index. LOOP AT ASSIGNING . IF sy-tabix EQ lv_cur_row. CLEAR ls_comp_tab. READ TABLE lt_comp_tab INDEX lv_col_count_read INTO ls_comp_tab. ASSIGN COMPONENT ls_comp_tab-name OF STRUCTURE TO . lv_value = . CONDENSE lv_index. CONCATENATE 'A' lv_index INTO attr_name. lv_element->set_attribute( name = attr_name value = lv_value ). ENDIF. ENDLOOP. ENDIF. lv_count = lv_count + 1. ENDDO. CLEAR lv_col_count. CLEAR lv_count. ENDDO. ENDMETHOD. I definied my table in Layout Tab of the View and create here in thos method dynamicly my columns. lv_table_column = cl_wd_table_column=>new_table_column( ). . . lv_table->add_column( lv_table_column ). In I have my data that should be shown later in my table. So I create for each row in this fieldsymbol in a loop: lv_element = lv_node->create_element( ). lv_node->bind_element( new_item = lv_element set_initial_elements = abap_false ). Later I fill every cell in my table with a different value with this loop: LOOP AT ASSIGNING . IF sy-tabix EQ lv_cur_row. CLEAR ls_comp_tab. READ TABLE lt_comp_tab INDEX lv_col_count_read INTO ls_comp_tab. ASSIGN COMPONENT ls_comp_tab-name OF STRUCTURE TO . lv_value = . CONDENSE lv_index. CONCATENATE 'A' lv_index INTO attr_name. lv_element->set_attribute( name = attr_name value = lv_value ). ENDIF. ENDLOOP. Now my problem is, that I need for every ROW of my table UI Element a different cell editor. I know how to change it for the column. But is not my issue. I want to have images (traffic lights red and green) in some rows. The other rows should have numbers. The coding works, so that I have all the data at the right place in my table, only the images are shown as a string, because the cells of these rows have the cell editor Text_View. I tried something with cell variants (with cl_wd_table_standard_cell), but it was not possible for me to get a cell variant "image" in these cells/rows were I need it. I hope you understand my problem and now what to do here. Thanks a lot in advance. Best Regards, Ingmar
-
I am having a problem with enhancing a .class for JDO
Hi
i am having a rpoblem with JDO . please help me for this.
Buildfile: build.xml
compile:
xdoclet:
[ojbdoclet] May 26, 2005 11:08:55 AM xdoclet.XDocletMain start
[ojbdoclet] INFO: Running <ojbrepository/>
[ojbdoclet] May 26, 2005 11:08:56 AM xdoclet.XDocletMain start
[ojbdoclet] INFO: Running <torqueschema/>
build:
build_if_with_mainclass:
enhance-jdori:
[java] Enhancer: options:
[java] verbose = true
[java] quiet = false
[java] forceWrite = true
[java] noWrite = false
[java] sourcePath = null
[java] destinationDirectory = build/classes
[java] propertiesFileName = null
[java] doTiming = false
[java] classNames = {
[java] }
[java] jdoFileNames = {
[java] src/java/org/apache/ojb/tutorial5/Product.jdo
[java] }
[java] classFileNames = {
[java] build/org/apache/ojb/tutorial5/Product.class
[java] }
[java] zipFileNames = {
[java] }
[java] dumpClass = false
[java] noAugment = false
[java] noAnnotate = false
[java] JDO ENHANCER: using file: file:/D:/ojb-blank/ojb-blank/build/org/ap
che/ojb/tutorial5/Product.class
[java] Class Locator: using class files: {
[java] build/org/apache/ojb/tutorial5/Product.class
[java] }
[java] JDO ENHANCER: using file: file:/D:/ojb-blank/ojb-blank/src/java/org
apache/ojb/tutorial5/Product.jdo
[java] -------------------------------------------------------------------
[java] JDO ENHANCER: Enhancer: enhancing classfile ...
[java] JDO ENHANCER: scanning class org.apache.ojb.tutorial5.Product
[java] JDO ENHANCER: not found resource: META-INF/package.jdo
[java] JDO ENHANCER: not found resource: WEB-INF/package.jdo
[java] JDO ENHANCER: not found resource: package.jdo
[java] JDO ENHANCER: not found resource: org/package.jdo
[java] JDO ENHANCER: not found resource: org/apache/package.jdo
[java] JDO ENHANCER: not found resource: org/apache/ojb/package.jdo
[java] JDO ENHANCER: not found resource: org/apache/ojb/tutorial5/package.
do
[java] JDO ENHANCER: found resource: org/apache/ojb/tutorial5/Product.jdo
[java] com.sun.jdori.enhancer.util.InternalError: assertion failed: cannot
find class file for class: org/apache/ojb/tutorial5/Product
[java] at com.sun.jdori.enhancer.util.Assertion.affirm(Unknown Source)
[java] at com.sun.jdori.enhancer.meta.model.EnhancerMetaDataJDOModelIm
l.declareField(Unknown Source)
[java] at com.sun.jdori.enhancer.core.Analyzer.scanFields(Unknown Sour
e)
[java] at com.sun.jdori.enhancer.core.Analyzer.scan(Unknown Source)
[java] at com.sun.jdori.enhancer.core.Controller.scan(Unknown Source)
[java] at com.sun.jdori.enhancer.core.Controller.enhanceClass(Unknown
ource)
[java] at com.sun.jdori.enhancer.filter.Enhancer.enhanceClassFile1(Unk
own Source)
[java] at com.sun.jdori.enhancer.filter.Enhancer.enhanceClassFile(Unkn
wn Source)
[java] at com.sun.jdori.enhancer.Main.enhanceClassFile(Unknown Source)
[java] at com.sun.jdori.enhancer.Main.enhanceInputFiles(Unknown Source
[java] at com.sun.jdori.enhancer.Main.process(Unknown Source)
[java] at com.sun.jdori.enhancer.Main.main(Unknown Source)
[java] Fatal error while enhancing: JDO ENHANCER: An internal error occurr
d while enhancing input class; detailed message: assertion failed: cannot find
lass file for class: org/apache/ojb/tutorial5/Product
[java] com.sun.jdori.enhancer.EnhancerFatalError: JDO ENHANCER: An interna
error occurred while enhancing input class; detailed message: assertion failed
cannot find class file for class: org/apache/ojb/tutorial5/Product
[java] at com.sun.jdori.enhancer.filter.Enhancer.enhanceClassFile(Unkn
wn Source)
[java] at com.sun.jdori.enhancer.Main.enhanceClassFile(Unknown Source)
[java] at com.sun.jdori.enhancer.Main.enhanceInputFiles(Unknown Source
[java] at com.sun.jdori.enhancer.Main.process(Unknown Source)
[java] at com.sun.jdori.enhancer.Main.main(Unknown Source)
[java] aborted with errors.
BUILD FAILED
D:\ojb-blank\ojb-blank\build.xml:226: Java returned: 1
Please help me asap
bye
Rahul S
Senior Software Eng.
Lionbridge Tech Pvt Ltd.Thanks for the suggestion. I have my iphone in an Otter Box and am not aware of getting any water in the phone. I tried cleaning out the docking opening with a toothbrush, no help. I will take your suggestion about going to Apple. Thanks again
-
When I tried to recover my profile (I am going to be reformatting and wanted to save my bookmarks and passwords) the line in your help that I was supposed to type into the start menu came up with zero hits, if you could let me know what the problem may be I would appreciate it, thanks!
Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)
Maybe you are looking for
-
Error while assigning security.
I am trying to make a user able to feed data into forms. I have been able to do that for a couple of forms but this one form is particularly giving me trouble. Everytime I try to use the form with planner priviliges, it throws an error - "*You are tr
-
hi I wanted to buy a HP printer but at first I wanted to know what's the difference between HP Color Laserjet Enterprise M651dn and HP Color Laserjet Enterprise Cp4525dn , and what does enterprise mean in these products ?
-
I turned off auto upgrades I defaulted my home page I made a blank home page I cannot get rid of the double page on the initial start up of the browser.
-
Has anyone seen this problem?
-
Publish web templates in business explorer
Hello Guys, In standart business explorer role , we can run queries in BEX Web Analyzer in portal.But we can not see web templates in BEX Analyzer in business explorer role in portal.It is not possible to see web templates in business explorer role i