Missing borders in JInternalFrame

Hi
I am developing a graphic program. Some of the code was developed in a frame based awt enviroment. I ported the program to a swing enviroment using JFrame and JInternalFrame. The borders of the JInternalFrame is not visible. Only objects and pictures in the frame is seen. The frame itself is invisible. Please help. Suggest any way I can get around the problem.
Thanks

I tried again today, but I have not been able to
reproduce that behaviour; maybe for I use j2se 1.3.
Did you try what happens disabling double buffering in
RepaintManager? On a different machine?
Otherwise, you should try to reproduce the behaviour in
a minimal self-contained example. Most probably you
will find out what goes wrong during that process; if
not, posting that code will allow further investigation.

Similar Messages

Webparts missing borders and edit web part menu

I have a web part page, and added 7 apps (document libraries) into the page. They are all set to minimized for the chrome state and toolbar type is "Full Toolbar". The web parts do not display any border, and the edit web part menu
is not available, it is only available when in editing mode.
When I look at my site in SharePoint 2007 with the same settings, I can see that they have borders on the web parts and the edit web part menu is available on the right hand side (even when you are not in edit mode).
2007 View (which I'm looking to mimic):
What I currently have in 2013 (no borders or edit web part menu):
Am I missing a setting? I've tried in IE 11, FireFox and Chrome, all are the same.
Any help would be most appreciated.

I've done some fiddling after reading your post.. This seems like a bug, and there is hardly any information on it.
I'm experiencing the exact same thing in my environment; I can minimize a web part, and it is not restorable unless I edit the page. Furthermore, when I set the chrome to Title and Border, I get no border.
Also, it's cleared stated by MS that this should be possible: "You can configure a Web Part to be minimized by default on a page. You might do this if a page seems crowded.
The readers of the page can restore the Web Part while they are reading the page. If they close and then reopen the page, the Web Part will be minimized again."
https://support.office.microsoft.com/en-IE/article/Add-move-minimize-or-delete-a-Web-Part-from-a-page-362b1684-ad95-4a53-b826-443d8d9bdee0

Numbers 3 missing borders

Hi, I am running the New Numbers 3 on mavericks, when I filter a spreasheet, many of the cells borders go missing, any ideas?

Hi mac,
Select the Header Column:
Then Format Inspector > Cell > Border > No Border and choose which borders to apply that style
Then select the Header Row and so on.
When it suits your needs, File > Save As Template for future use.
Regards,
Ian.

Drag borders of JInternalFrame beyond edges of JDesktopPane

The default settings for a JDesktopPane are that I cannot resize a JInternFrame beyond the edges of JDesktopPane. The mouse drag further, the right or bottom border of JInternFrame that was dragged remains to the border of JDesktopPane.
I want that the draggen of right or bottom border of JInternalFrame possible beyond the edge of JDesktopPane.
How do I have to intervene in DesktopManger, to make possible resize border of JInternalFrame beyond the edge of JDesktopPane?
Perhaps someone can help.
Merry Christmas.

Thx, my error. I describe it better. I want a JInternalFrame 'alone' outside the application in a JDialog for example, something like this.
But I can make this JDialog-Window smaller, not bigger. I am sorry, but I cannot insert the code specified above well.
Can you help please?
import java.awt.Dimension;
import java.awt.Point;
import java.awt.event.ComponentAdapter;
import java.awt.event.ComponentEvent;
import java.awt.event.MouseEvent;
import java.awt.event.MouseListener;
import java.awt.event.MouseMotionListener;
import javax.swing.JComponent;
import javax.swing.JDesktopPane;
import javax.swing.JDialog;
import javax.swing.JInternalFrame;
import javax.swing.event.InternalFrameAdapter;
import javax.swing.event.InternalFrameEvent;
import javax.swing.plaf.basic.BasicInternalFrameUI;
@SuppressWarnings("serial")
public class InternFrameExtern extends JDialog{
     JDesktopPane sDesktopPane;
     private JInternalFrame jInternalFrame;
     private JComponent northPane;
     private int pressedX=0;
     private int pressedY=0;
     public InternFrameExtern(String title){
          setUndecorated(true);
          sDesktopPane=new JDesktopPane();
          setContentPane(sDesktopPane);
          jInternalFrame=new JInternalFrame("Test",true,true);
          jInternalFrame.setSize(new Dimension(300,170));
          jInternalFrame.addInternalFrameListener(new InternalFrameAdapter(){
             public void internalFrameClosing (InternalFrameEvent e){}
             public void internalFrameOpened(final InternalFrameEvent e){}
             public void internalFrameClosed(final InternalFrameEvent e){
                  InternFrameExtern.this.setVisible(false);
                  InternFrameExtern.this.dispose();
             public void internalFrameIconified(final InternalFrameEvent e){}
             public void internalFrameDeiconified(final InternalFrameEvent e){}
             public void internalFrameActivated(final InternalFrameEvent e){}
            public void internalFrameDeactivated(final InternalFrameEvent e){}
          northPane=((BasicInternalFrameUI)jInternalFrame.getUI()).getNorthPane();
          northPane.addMouseListener(new MouseListener(){
               public void mouseClicked(MouseEvent e){}
               public void mouseEntered(MouseEvent e){}
               public void mouseExited(MouseEvent e){}
               public void mousePressed(MouseEvent e) {
                    pressedX=e.getX();
                    pressedY=e.getY();
               public void mouseReleased(MouseEvent e){}
          northPane.addMouseMotionListener(new MouseMotionListener(){
               public void mouseDragged(MouseEvent e){
                    int draggedObjX=InternFrameExtern.this.getLocation().x+e.getX()-pressedX;
                    int draggedObjY=InternFrameExtern.this.getLocation().y+e.getY()-pressedY;
                    InternFrameExtern.this.setLocation(draggedObjX,draggedObjY);
                    InternFrameExtern.this.getjInternalFrame().setLocation(0,0);
               public void mouseMoved(MouseEvent e){}
          sDesktopPane.add(jInternalFrame);
          jInternalFrame.setVisible(true);
          jInternalFrame.addComponentListener(new ComponentAdapter(){
               public void componentResized(ComponentEvent e){
                    InternFrameExtern.this.setSize(jInternalFrame.getSize().width,jInternalFrame.getSize().height);
          setSize(jInternalFrame.getSize());
          setLocation(new Point(50,50));
     public JComponent getNorthPane(){
          return northPane;
     public JInternalFrame getjInternalFrame(){
          return jInternalFrame;
     public static void main(String[] args){
          InternFrameExtern td=new InternFrameExtern("Desktop");
          td.setVisible(true);
}

Firefox not displaying Cascading Style Sheet borders

I have pages that sit inside Drupal with its own style sheet that overrides the styles of the themes. The problem occurs where I have tables. Most often the right border of the table or some TDs are sometimes missing. I don't style each table cell separately, but some columns (not all) are just missing borders, whether top, right or bottom. I use firebug and when I inspect a specific cell I can see that the border is supposed to show (as it does in Chrome and IE). If the table width or height is changed in DOM, the borders sometimes appear.

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

[Solved] Gnome 3 goes into fallback mode after graphics card upgrade

Hello,
I have been using Arch with an AMD Radeon HD 4670 and open source drivers for the past couple of months together with Cinnamon, everything was working well. Recently I have upgraded to an AMD Radeon HD7750 which is not supported by the open source drivers, I have removed the open source drivers and installed the catalyst-total package from the AUR. After doing so Cinnamon failed to start and gave me an error, I have decided to try Gnome 3 and it just goes into fall back mode which I assume Cinnamon cannot work with.
XFCE however works. There is one small issue with it though, the left and right borders of windows are missing (borders of context menus are missing too). Other than that it seems fine however.
What is the problem? Is Gnome 3 support for Catalyst just simply very bad? or have I installed something incorrectly?
Any help would be greatly appreciated, thanks.
EDIT: Catalyst 12.9 recently came out and a corresponding catalyst-total package was released, intially it broke my X install but after re-running aticonfig --initial it worked fine. I have uncovered an option in the Catalayst Control Centre which lets me use two screens without Xinerama, doing the following: Display Manager -> Multi-display -> Multi-display desktop with display(s) 1, allows me to use compositing and my two screens, and I am still able to drag windows between the screens. After I have saved these new settings I have reloaded Cinnamon and it worked perfectly.
Last edited by dom96 (2012-10-15 15:41:28)

Another thing that I have noticed is a strange X error when launching 'xsane': https://gist.github.com/7f28ac7cd393c8671ed3

Problem with Weblogic Commerce Personalization

We're having problem that we have not been able to pin point yet. Originally
when we started we were fine and our public view and personal view of
portals/portlets was o.k. Somehow within a day, before logging to the
personalization, in public view, all the colors are messed up and we're
missing the borders and titles. One of our developers was missing a portlet
until he logged on.
The problem may have to do with the directories specified in the properties
file. I'm guessing that there maybe loopholes in the instructions. The
folders that need to be specified in the properties, i.e. ../repository or
.../portlet, seems to be mixed up a bit.
Thanks for your help,
Farah

Hello Farah,
All of the problems you describe could have been caused by configuring your
portlets in the Administraton Tool to behave as you have described.
Particulary:
Somehow within a day, before logging to the
personalization, in public view, all the colors are messed up and we're
missing the borders and titles.Missing borders is caused by using the Admin Tool --> Portal Management -->
Colors tool to set "Portlet borders" to "off". Messed up colors could be caused
by someone using the admin tool to change colors for a group associated with
your user.
The JSP page for the titlebar is specified in the portlet definition, using
the Admin Tool --> Portal Management tool. You specify it when you create or
edit the properties for a portlet definition. A default titlebar.jsp is
supplied with WLCS 2.0. If you leave the Titlebar URL field blank, then no
titlebar will show up. If the path to the titlebar is incorrect, then it will
not show up. The path you specify is relative to the portal workingdir or the
portal repositorydir, which are specified in weblogic.properties. The portal
workingdir and repositorydir are relative to the documentRoot, also specified in
weblogic.properties. The server looks for portal files in the workingdir first
and then in the repositorydir.
The exampleportal ships with the titlebar.jsp in the
<install-dir>/server/public_html/portals/repository directory and you would fill
in the Titlebar URL field with "titlebar.jsp" because
documentRoot=<install-dir>/server/public_html and the exampleportal
repositorydir=/portals/repository/ (the exampleportal
workingdir=/portals/example/, and this directory does not come with the
installation)
One of our developers was missing a portlet
until he logged on.Such a portlet is called a "Login Required" portlet and it is specified in the
Admin Tool using the portlet definition tool.
Ture Hoefner
BEA Systems, Inc.
1655 Walnut Street; suite 200
Boulder, CO 80302
www.beasys.com

Is anyone else having table border rendering problems in Firefox 3.6.7 for Mac?

I recently applied a Mac Firefox update (not sure which one, but I'm currently on 3.6.7) that introduced some strange table border rendering behaviors. Long story short, on certain pages that I visit regularly, the right-most table borders are now rendering erratically. The problem does not occur in Safari or Chrome on Mac, nor does it occur in IE or Firefox on Windows. Seems specific to Mac Firefox.
To reproduce, using Firefox 3.6.7 on Mac, browse to the following URL:
http://www.relativityreport.com/?page_id=963
...and note the erratic rendering of the right-most table cells on the page (you may need to scroll down to the bottom-most table to see the problem...but not always). They should be gray, but often appear blank (not necessarily all at once). Refresh the page a few times and note how the missing borders randomly appear and disappear. Now click your browser's back button. When the previous page has loaded, click the forward button to return to the affected URL. Note now how all cells render correctly.
Thanks!

I am also getting a similar error. When I increase the border width to 2px or more it becomes sort of eroded.I am using windows 7 firefox 4. Borders seem fine in all other major browsers including IE9.
[http://year3.masterspokerleague.com/index.php?option=com_poker&view=overall&season_id=2 Example] http://year3.masterspokerleague.com/index.php?option=com_poker&view=overall&season_id=2
Any ideas?

Window resize issue (borderless form)

Hello!
Resizing window (height) programmically does not work correctly. Here's the problem in visual form:
When resizing the window height from (715; 375) to (715;600) (or even to its MaximumSize (715; 660)) using commands as which are listed here, operation leaves parts
of the bottom elements under the StatusStrip control bat. No matter if the window max height/height is set to say 800, always the same issue.
Is it the missing borders behind the issue or is the StatusStrip height just unnoticed? Is there some solution available to get it resize correctly?
(VC++ 2013.4, .NET 4.5x, Windows 7)

OK, you can download the fPEQGUI-10MC project from
http://jiiteepee.tripod.com/home.html (I couldn't get the build from this source to work properly in 64-bit Windows 10 so better try with 32-bit build).
It's quite messy coding there but you should be able to repeat the issue by commenting (just use the find-replace feature) the graf_splitter and pref_splitter lines from methods (there's no window resize commands now but you can try by adding
ones into these methods listed below):
fWButton_Click,
menu_options_preferences_file_write_interval_Click,
menu_options_preferences_cutoff_freq_Click,
initDefaults,
setGainForRIAAFiltersToolStripMenuItem_Click,
gui_show_graph_Click_1
NOTE: You probably can't load the project into Designer because of I have edided all the font definitions by adding a font size multiplier (DPI scalar) in InitializeComponent() method (least I can't load without removing the multipliers).

[Solved] LXDE missing window borders (or decoratioins, widget?)

Hello,
The LXDE runs fine on my newly built arch for a couple of days, and then I must have done something (e.g. upgraded or uninstalled some packages) and now I can still log into LXDE by using slim login manager or startx command, but none of the applications will have the window borders and I am not able to move the application window around or minimize/resize the window.
Here is my .xinitrc file
[sgeuser@sge00 ~]$ cat .xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
FontPath /usr/share/fonts/100dpi
xset -dpms
xset s off
exec /usr/bin/startlxde
Here is my systemd journal since reboot:
[1;39m-- Reboot --[0m
Sep 02 13:13:37 sge00 systemd-journal[98]: Allowing runtime journal files to grow to 100.3M.
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys cpuset
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys cpu
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys cpuacct
Sep 02 13:13:37 sge00 kernel: Linux version 3.10.10-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Aug 30 11:30:06 CEST 2013
Sep 02 13:13:37 sge00 kernel: Command line: root=/dev/sda1 rw initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Sep 02 13:13:37 sge00 kernel: e820: BIOS-provided physical RAM map:
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
Sep 02 13:13:37 sge00 kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
Sep 02 13:13:37 sge00 kernel: NX (Execute Disable) protection: active
Sep 02 13:13:37 sge00 kernel: SMBIOS 2.5 present.
Sep 02 13:13:37 sge00 kernel: DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Sep 02 13:13:37 sge00 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Sep 02 13:13:37 sge00 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Sep 02 13:13:37 sge00 kernel: No AGP bridge found
Sep 02 13:13:37 sge00 kernel: e820: last_pfn = 0x7fff0 max_arch_pfn = 0x400000000
Sep 02 13:13:37 sge00 kernel: MTRR default type: uncachable
Sep 02 13:13:37 sge00 kernel: MTRR variable ranges disabled:
Sep 02 13:13:37 sge00 kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep 02 13:13:37 sge00 kernel: CPU MTRRs all blank - virtualized system.
Sep 02 13:13:37 sge00 kernel: found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
Sep 02 13:13:37 sge00 kernel: Scanning 1 areas for low memory corruption
Sep 02 13:13:37 sge00 kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x00000000-0x000fffff] page 4k
Sep 02 13:13:37 sge00 kernel: BRK [0x01b23000, 0x01b23fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: BRK [0x01b24000, 0x01b24fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: BRK [0x01b25000, 0x01b25fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x7fa00000-0x7fbfffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x7fa00000-0x7fbfffff] page 2M
Sep 02 13:13:37 sge00 kernel: BRK [0x01b26000, 0x01b26fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x7c000000-0x7f9fffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x7c000000-0x7f9fffff] page 2M
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x00100000-0x001fffff] page 4k
Sep 02 13:13:37 sge00 kernel: [mem 0x00200000-0x7bffffff] page 2M
Sep 02 13:13:37 sge00 kernel: init_memory_mapping: [mem 0x7fc00000-0x7ffeffff]
Sep 02 13:13:37 sge00 kernel: [mem 0x7fc00000-0x7fdfffff] page 2M
Sep 02 13:13:37 sge00 kernel: [mem 0x7fe00000-0x7ffeffff] page 4k
Sep 02 13:13:37 sge00 kernel: BRK [0x01b27000, 0x01b27fff] PGTABLE
Sep 02 13:13:37 sge00 kernel: RAMDISK: [mem 0x7fd22000-0x7ffeefff]
Sep 02 13:13:37 sge00 kernel: ACPI: RSDP 00000000000e0000 00024 (v02 VBOX )
Sep 02 13:13:37 sge00 kernel: ACPI: XSDT 000000007fff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
Sep 02 13:13:37 sge00 kernel: ACPI: FACP 000000007fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
Sep 02 13:13:37 sge00 kernel: ACPI: DSDT 000000007fff0470 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
Sep 02 13:13:37 sge00 kernel: ACPI: FACS 000000007fff0200 00040
Sep 02 13:13:37 sge00 kernel: ACPI: APIC 000000007fff0240 0005C (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
Sep 02 13:13:37 sge00 kernel: ACPI: SSDT 000000007fff02a0 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
Sep 02 13:13:37 sge00 kernel: ACPI: Local APIC address 0xfee00000
Sep 02 13:13:37 sge00 kernel: No NUMA configuration found
Sep 02 13:13:37 sge00 kernel: Faking a node at [mem 0x0000000000000000-0x000000007ffeffff]
Sep 02 13:13:37 sge00 kernel: Initmem setup node 0 [mem 0x00000000-0x7ffeffff]
Sep 02 13:13:37 sge00 kernel: NODE_DATA [mem 0x7fd1d000-0x7fd21fff]
Sep 02 13:13:37 sge00 kernel: [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d400000-ffff88007f3fffff] on node 0
Sep 02 13:13:37 sge00 kernel: Zone ranges:
Sep 02 13:13:37 sge00 kernel: DMA [mem 0x00001000-0x00ffffff]
Sep 02 13:13:37 sge00 kernel: DMA32 [mem 0x01000000-0xffffffff]
Sep 02 13:13:37 sge00 kernel: Normal empty
Sep 02 13:13:37 sge00 kernel: Movable zone start for each node
Sep 02 13:13:37 sge00 kernel: Early memory node ranges
Sep 02 13:13:37 sge00 kernel: node 0: [mem 0x00001000-0x0009efff]
Sep 02 13:13:37 sge00 kernel: node 0: [mem 0x00100000-0x7ffeffff]
Sep 02 13:13:37 sge00 kernel: On node 0 totalpages: 524174
Sep 02 13:13:37 sge00 kernel: DMA zone: 64 pages used for memmap
Sep 02 13:13:37 sge00 kernel: DMA zone: 21 pages reserved
Sep 02 13:13:37 sge00 kernel: DMA zone: 3998 pages, LIFO batch:0
Sep 02 13:13:37 sge00 kernel: DMA32 zone: 8128 pages used for memmap
Sep 02 13:13:37 sge00 kernel: DMA32 zone: 520176 pages, LIFO batch:31
Sep 02 13:13:37 sge00 kernel: ACPI: PM-Timer IO Port: 0x4008
Sep 02 13:13:37 sge00 kernel: ACPI: Local APIC address 0xfee00000
Sep 02 13:13:37 sge00 kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 02 13:13:37 sge00 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Sep 02 13:13:37 sge00 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 02 13:13:37 sge00 kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Sep 02 13:13:37 sge00 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 02 13:13:37 sge00 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 02 13:13:37 sge00 kernel: ACPI: IRQ0 used by override.
Sep 02 13:13:37 sge00 kernel: ACPI: IRQ2 used by override.
Sep 02 13:13:37 sge00 kernel: ACPI: IRQ9 used by override.
Sep 02 13:13:37 sge00 kernel: Using ACPI (MADT) for SMP configuration information
Sep 02 13:13:37 sge00 kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
Sep 02 13:13:37 sge00 kernel: nr_irqs_gsi: 40
Sep 02 13:13:37 sge00 kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep 02 13:13:37 sge00 kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Sep 02 13:13:37 sge00 kernel: PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Sep 02 13:13:37 sge00 kernel: e820: [mem 0x80000000-0xfffbffff] available for PCI devices
Sep 02 13:13:37 sge00 kernel: Booting paravirtualized kernel on bare hardware
Sep 02 13:13:37 sge00 kernel: setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
Sep 02 13:13:37 sge00 kernel: PERCPU: Embedded 28 pages/cpu @ffff88007fa00000 s86016 r8192 d20480 u1048576
Sep 02 13:13:37 sge00 kernel: pcpu-alloc: s86016 r8192 d20480 u1048576 alloc=1*2097152
Sep 02 13:13:37 sge00 kernel: pcpu-alloc: [0] 0 1
Sep 02 13:13:37 sge00 kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 515961
Sep 02 13:13:37 sge00 kernel: Policy zone: DMA32
Sep 02 13:13:37 sge00 kernel: Kernel command line: root=/dev/sda1 rw initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Sep 02 13:13:37 sge00 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Sep 02 13:13:37 sge00 kernel: Checking aperture...
Sep 02 13:13:37 sge00 kernel: No AGP bridge found
Sep 02 13:13:37 sge00 kernel: Calgary: detecting Calgary via BIOS EBDA area
Sep 02 13:13:37 sge00 kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Sep 02 13:13:37 sge00 kernel: Memory: 2049056k/2097088k available (4943k kernel code, 392k absent, 47640k reserved, 4024k data, 1124k init)
Sep 02 13:13:37 sge00 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sep 02 13:13:37 sge00 kernel: Preemptible hierarchical RCU implementation.
Sep 02 13:13:37 sge00 kernel: RCU dyntick-idle grace-period acceleration is enabled.
Sep 02 13:13:37 sge00 kernel: Dump stacks of tasks blocking RCU-preempt GP.
Sep 02 13:13:37 sge00 kernel: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
Sep 02 13:13:37 sge00 kernel: NR_IRQS:4352 nr_irqs:512 16
Sep 02 13:13:37 sge00 kernel: Console: colour VGA+ 80x25
Sep 02 13:13:37 sge00 kernel: console [tty0] enabled
Sep 02 13:13:37 sge00 kernel: allocated 8388608 bytes of page_cgroup
Sep 02 13:13:37 sge00 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep 02 13:13:37 sge00 kernel: tsc: Fast TSC calibration failed
Sep 02 13:13:37 sge00 kernel: tsc: PIT calibration matches PMTIMER. 2 loops
Sep 02 13:13:37 sge00 kernel: tsc: Detected 2708.883 MHz processor
Sep 02 13:13:37 sge00 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5419.50 BogoMIPS (lpj=9029610)
Sep 02 13:13:37 sge00 kernel: pid_max: default: 32768 minimum: 301
Sep 02 13:13:37 sge00 kernel: Security Framework initialized
Sep 02 13:13:37 sge00 kernel: AppArmor: AppArmor disabled by boot time parameter
Sep 02 13:13:37 sge00 kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 02 13:13:37 sge00 kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 02 13:13:37 sge00 kernel: Mount-cache hash table entries: 256
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys memory
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys devices
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys freezer
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys net_cls
Sep 02 13:13:37 sge00 kernel: Initializing cgroup subsys blkio
Sep 02 13:13:37 sge00 kernel: CPU: Physical Processor ID: 0
Sep 02 13:13:37 sge00 kernel: CPU: Processor Core ID: 0
Sep 02 13:13:37 sge00 kernel: mce: CPU supports 0 MCE banks
Sep 02 13:13:37 sge00 kernel: [117B blob data]
Sep 02 13:13:37 sge00 kernel: Freeing SMP alternatives: 20k freed
Sep 02 13:13:37 sge00 kernel: ACPI: Core revision 20130328
Sep 02 13:13:37 sge00 kernel: ACPI: All ACPI Tables successfully acquired
Sep 02 13:13:37 sge00 kernel: ftrace: allocating 19652 entries in 77 pages
Sep 02 13:13:37 sge00 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 02 13:13:37 sge00 kernel: smpboot: CPU0: Intel(R) Core(TM) i7-3820QM CPU @ 2.70GHz (fam: 06, model: 3a, stepping: 09)
Sep 02 13:13:37 sge00 kernel: Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
Sep 02 13:13:37 sge00 kernel: NMI watchdog: disabled (cpu0): hardware events not enabled
Sep 02 13:13:37 sge00 kernel: smpboot: Booting Node 0, Processors #1 OK
Sep 02 13:13:37 sge00 kernel: mce: CPU supports 0 MCE banks
Sep 02 13:13:37 sge00 kernel: TSC synchronization [CPU#0 -> CPU#1]:
Sep 02 13:13:37 sge00 kernel: Measured 31057 cycles TSC warp between CPUs, turning off TSC clock.
Sep 02 13:13:37 sge00 kernel: tsc: Marking TSC unstable due to check_tsc_sync_source failed
Sep 02 13:13:37 sge00 kernel: Brought up 2 CPUs
Sep 02 13:13:37 sge00 kernel: smpboot: Total of 2 processors activated (10839.01 BogoMIPS)
Sep 02 13:13:37 sge00 kernel: devtmpfs: initialized
Sep 02 13:13:37 sge00 kernel: RTC time: 17:13:36, date: 09/02/13
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 16
Sep 02 13:13:37 sge00 kernel: ACPI: bus type PCI registered
Sep 02 13:13:37 sge00 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Sep 02 13:13:37 sge00 kernel: PCI: Using configuration type 1 for base access
Sep 02 13:13:37 sge00 kernel: bio: create slab <bio-0> at 0
Sep 02 13:13:37 sge00 kernel: ACPI: Added _OSI(Module Device)
Sep 02 13:13:37 sge00 kernel: ACPI: Added _OSI(Processor Device)
Sep 02 13:13:37 sge00 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Sep 02 13:13:37 sge00 kernel: ACPI: Added _OSI(Processor Aggregator Device)
Sep 02 13:13:37 sge00 kernel: ACPI: EC: Look up EC in DSDT
Sep 02 13:13:37 sge00 kernel: ACPI: Executed 1 blocks of module-level executable AML code
Sep 02 13:13:37 sge00 kernel: ACPI: Interpreter enabled
Sep 02 13:13:37 sge00 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
Sep 02 13:13:37 sge00 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
Sep 02 13:13:37 sge00 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130328/hwxface-568)
Sep 02 13:13:37 sge00 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130328/hwxface-568)
Sep 02 13:13:37 sge00 kernel: ACPI: (supports S0 S5)
Sep 02 13:13:37 sge00 kernel: ACPI: Using IOAPIC for interrupt routing
Sep 02 13:13:37 sge00 kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Sep 02 13:13:37 sge00 kernel: ACPI: No dock devices found.
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
Sep 02 13:13:37 sge00 kernel: PCI: root bus 00: using default resources
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
Sep 02 13:13:37 sge00 kernel: PCI host bridge to bus 0000:00
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
Sep 02 13:13:37 sge00 kernel: pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
Sep 02 13:13:37 sge00 kernel: pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
Sep 02 13:13:37 sge00 kernel: pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: reg 10: [io 0xd040-0xd047]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: reg 18: [io 0xd050-0xd057]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: reg 20: [io 0xd060-0xd06f]
Sep 02 13:13:37 sge00 kernel: pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Sep 02 13:13:37 sge00 kernel: acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
Sep 02 13:13:37 sge00 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
Sep 02 13:13:37 sge00 kernel: ACPI: Enabled 1 GPEs in block 00 to 07
Sep 02 13:13:37 sge00 kernel: acpi root: \_SB_.PCI0 notify handler is installed
Sep 02 13:13:37 sge00 kernel: Found 1 acpi root devices
Sep 02 13:13:37 sge00 kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep 02 13:13:37 sge00 kernel: vgaarb: loaded
Sep 02 13:13:37 sge00 kernel: vgaarb: bridge control possible 0000:00:02.0
Sep 02 13:13:37 sge00 kernel: PCI: Using ACPI for IRQ routing
Sep 02 13:13:37 sge00 kernel: PCI: pci_cache_line_size set to 64 bytes
Sep 02 13:13:37 sge00 kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Sep 02 13:13:37 sge00 kernel: e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
Sep 02 13:13:37 sge00 kernel: NetLabel: Initializing
Sep 02 13:13:37 sge00 kernel: NetLabel: domain hash size = 128
Sep 02 13:13:37 sge00 kernel: NetLabel: protocols = UNLABELED CIPSOv4
Sep 02 13:13:37 sge00 kernel: NetLabel: unlabeled traffic allowed by default
Sep 02 13:13:37 sge00 kernel: Switching to clocksource refined-jiffies
Sep 02 13:13:37 sge00 kernel: pnp: PnP ACPI init
Sep 02 13:13:37 sge00 kernel: ACPI: bus type PNP registered
Sep 02 13:13:37 sge00 kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
Sep 02 13:13:37 sge00 kernel: pnp 00:01: [dma 4]
Sep 02 13:13:37 sge00 kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Sep 02 13:13:37 sge00 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
Sep 02 13:13:37 sge00 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
Sep 02 13:13:37 sge00 kernel: pnp: PnP ACPI: found 4 devices
Sep 02 13:13:37 sge00 kernel: ACPI: bus type PNP unregistered
Sep 02 13:13:37 sge00 kernel: Switching to clocksource acpi_pm
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
Sep 02 13:13:37 sge00 kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 2
Sep 02 13:13:37 sge00 kernel: TCP established hash table entries: 16384 (order: 6, 262144 bytes)
Sep 02 13:13:37 sge00 kernel: TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
Sep 02 13:13:37 sge00 kernel: TCP: Hash tables configured (established 16384 bind 16384)
Sep 02 13:13:37 sge00 kernel: TCP: reno registered
Sep 02 13:13:37 sge00 kernel: UDP hash table entries: 1024 (order: 3, 32768 bytes)
Sep 02 13:13:37 sge00 kernel: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 1
Sep 02 13:13:37 sge00 kernel: pci 0000:00:00.0: Limiting direct PCI/PCI transfers
Sep 02 13:13:37 sge00 kernel: pci 0000:00:01.0: Activating ISA DMA hang workarounds
Sep 02 13:13:37 sge00 kernel: pci 0000:00:02.0: Boot video device
Sep 02 13:13:37 sge00 kernel: PCI: CLS 0 bytes, default 64
Sep 02 13:13:37 sge00 kernel: Unpacking initramfs...
Sep 02 13:13:37 sge00 kernel: Freeing initrd memory: 2868k freed
Sep 02 13:13:37 sge00 kernel: platform rtc_cmos: registered platform RTC device (no PNP device found)
Sep 02 13:13:37 sge00 kernel: Scanning for low memory corruption every 60 seconds
Sep 02 13:13:37 sge00 kernel: audit: initializing netlink socket (disabled)
Sep 02 13:13:37 sge00 kernel: type=2000 audit(1378142015.246:1): initialized
Sep 02 13:13:37 sge00 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Sep 02 13:13:37 sge00 kernel: VFS: Disk quotas dquot_6.5.2
Sep 02 13:13:37 sge00 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 02 13:13:37 sge00 kernel: msgmni has been set to 4007
Sep 02 13:13:37 sge00 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Sep 02 13:13:37 sge00 kernel: io scheduler noop registered
Sep 02 13:13:37 sge00 kernel: io scheduler deadline registered
Sep 02 13:13:37 sge00 kernel: io scheduler cfq registered (default)
Sep 02 13:13:37 sge00 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 02 13:13:37 sge00 kernel: intel_idle: does not run on family 6 model 58
Sep 02 13:13:37 sge00 kernel: GHES: HEST is not enabled!
Sep 02 13:13:37 sge00 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Sep 02 13:13:37 sge00 kernel: Linux agpgart interface v0.103
Sep 02 13:13:37 sge00 kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Sep 02 13:13:37 sge00 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 02 13:13:37 sge00 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Sep 02 13:13:37 sge00 kernel: mousedev: PS/2 mouse device common for all mice
Sep 02 13:13:37 sge00 kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Sep 02 13:13:37 sge00 kernel: rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
Sep 02 13:13:37 sge00 kernel: rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
Sep 02 13:13:37 sge00 kernel: cpuidle: using governor ladder
Sep 02 13:13:37 sge00 kernel: cpuidle: using governor menu
Sep 02 13:13:37 sge00 kernel: drop_monitor: Initializing network drop monitor service
Sep 02 13:13:37 sge00 kernel: TCP: cubic registered
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 10
Sep 02 13:13:37 sge00 kernel: NET: Registered protocol family 17
Sep 02 13:13:37 sge00 kernel: Key type dns_resolver registered
Sep 02 13:13:37 sge00 kernel: PM: Hibernation image not present or could not be loaded.
Sep 02 13:13:37 sge00 kernel: registered taskstats version 1
Sep 02 13:13:37 sge00 kernel: Magic number: 13:139:238
Sep 02 13:13:37 sge00 kernel: rtc_cmos rtc_cmos: setting system clock to 2013-09-02 17:13:36 UTC (1378142016)
Sep 02 13:13:37 sge00 kernel: Freeing unused kernel memory: 1124k freed
Sep 02 13:13:37 sge00 kernel: Write protecting the kernel read-only data: 8192k
Sep 02 13:13:37 sge00 kernel: Freeing unused kernel memory: 1192k freed
Sep 02 13:13:37 sge00 kernel: Freeing unused kernel memory: 400k freed
Sep 02 13:13:37 sge00 systemd-udevd[45]: starting version 204
Sep 02 13:13:37 sge00 kernel: ACPI: bus type USB registered
Sep 02 13:13:37 sge00 kernel: usbcore: registered new interface driver usbfs
Sep 02 13:13:37 sge00 kernel: usbcore: registered new interface driver hub
Sep 02 13:13:37 sge00 kernel: SCSI subsystem initialized
Sep 02 13:13:37 sge00 kernel: ACPI: bus type ATA registered
Sep 02 13:13:37 sge00 kernel: usbcore: registered new device driver usb
Sep 02 13:13:37 sge00 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sep 02 13:13:37 sge00 kernel: ohci_hcd 0000:00:06.0: OHCI Host Controller
Sep 02 13:13:37 sge00 kernel: ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 1
Sep 02 13:13:37 sge00 kernel: ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
Sep 02 13:13:37 sge00 kernel: libata version 3.00 loaded.
Sep 02 13:13:37 sge00 kernel: hub 1-0:1.0: USB hub found
Sep 02 13:13:37 sge00 kernel: hub 1-0:1.0: 8 ports detected
Sep 02 13:13:37 sge00 kernel: ahci 0000:00:0d.0: version 3.0
Sep 02 13:13:37 sge00 kernel: ahci: SSS flag set, parallel bus scan disabled
Sep 02 13:13:37 sge00 kernel: ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
Sep 02 13:13:37 sge00 kernel: ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
Sep 02 13:13:37 sge00 kernel: scsi0 : ahci
Sep 02 13:13:37 sge00 kernel: ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
Sep 02 13:13:37 sge00 kernel: ata_piix 0000:00:01.1: version 2.13
Sep 02 13:13:37 sge00 kernel: scsi1 : ata_piix
Sep 02 13:13:37 sge00 kernel: scsi2 : ata_piix
Sep 02 13:13:37 sge00 kernel: ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
Sep 02 13:13:37 sge00 kernel: ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
Sep 02 13:13:37 sge00 kernel: ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
Sep 02 13:13:37 sge00 kernel: ata3.00: configured for UDMA/33
Sep 02 13:13:37 sge00 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 02 13:13:37 sge00 kernel: ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
Sep 02 13:13:37 sge00 kernel: ata1.00: 167772160 sectors, multi 128: LBA48 NCQ (depth 31/32)
Sep 02 13:13:37 sge00 kernel: ata1.00: configured for UDMA/133
Sep 02 13:13:37 sge00 kernel: scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
Sep 02 13:13:37 sge00 kernel: scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] 167772160 512-byte logical blocks: (85.8 GB/80.0 GiB)
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] Write Protect is off
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 02 13:13:37 sge00 kernel: sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
Sep 02 13:13:37 sge00 kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Sep 02 13:13:37 sge00 kernel: sr 2:0:0:0: Attached scsi CD-ROM sr0
Sep 02 13:13:37 sge00 kernel: sda: sda1
Sep 02 13:13:37 sge00 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Sep 02 13:13:37 sge00 kernel: usb 1-1: new full-speed USB device number 2 using ohci_hcd
Sep 02 13:13:37 sge00 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Sep 02 13:13:37 sge00 systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Sep 02 13:13:37 sge00 systemd[1]: Detected virtualization 'oracle'.
Sep 02 13:13:37 sge00 systemd[1]: Set hostname to <sge00>.
Sep 02 13:13:37 sge00 systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
Sep 02 13:13:37 sge00 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
Sep 02 13:13:37 sge00 systemd[1]: Starting Remote File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Remote File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Expecting device sys-subsystem-net-devices-enp0s3.device...
Sep 02 13:13:37 sge00 systemd[1]: Starting Delayed Shutdown Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on Delayed Shutdown Socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting Device-mapper event daemon FIFOs.
Sep 02 13:13:37 sge00 systemd[1]: Listening on Device-mapper event daemon FIFOs.
Sep 02 13:13:37 sge00 systemd[1]: Starting LVM2 metadata daemon socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on LVM2 metadata daemon socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
Sep 02 13:13:37 sge00 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
Sep 02 13:13:37 sge00 systemd[1]: Starting Encrypted Volumes.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Encrypted Volumes.
Sep 02 13:13:37 sge00 systemd[1]: Starting udev Kernel Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on udev Kernel Socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting udev Control Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on udev Control Socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Sep 02 13:13:37 sge00 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Sep 02 13:13:37 sge00 systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Sep 02 13:13:37 sge00 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Sep 02 13:13:37 sge00 systemd[1]: Starting Paths.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Paths.
Sep 02 13:13:37 sge00 systemd[1]: Starting Journal Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on Journal Socket.
Sep 02 13:13:37 sge00 systemd[1]: Starting Load Kernel Modules...
Sep 02 13:13:37 sge00 systemd[1]: Starting Setup Virtual Console...
Sep 02 13:13:37 sge00 systemd[1]: Started Set Up Additional Binary Formats.
Sep 02 13:13:37 sge00 systemd[1]: Starting Apply Kernel Variables...
Sep 02 13:13:37 sge00 systemd[1]: Starting udev Coldplug all Devices...
Sep 02 13:13:37 sge00 systemd[1]: Starting Create static device nodes in /dev...
Sep 02 13:13:37 sge00 systemd[1]: Mounting POSIX Message Queue File System...
Sep 02 13:13:37 sge00 systemd[1]: Starting Journal Service...
Sep 02 13:13:37 sge00 systemd[1]: Started Journal Service.
Sep 02 13:13:37 sge00 systemd[1]: Mounting Debug File System...
Sep 02 13:13:37 sge00 systemd[1]: Mounting Huge Pages File System...
Sep 02 13:13:37 sge00 systemd[1]: Started File System Check on Root Device.
Sep 02 13:13:37 sge00 systemd[1]: Starting Remount Root and Kernel File Systems...
Sep 02 13:13:37 sge00 systemd[1]: Started Setup Virtual Console.
Sep 02 13:13:37 sge00 systemd[1]: Started Create static device nodes in /dev.
Sep 02 13:13:37 sge00 systemd[1]: Starting udev Kernel Device Manager...
Sep 02 13:13:37 sge00 kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
Sep 02 13:13:37 sge00 kernel: FS-Cache: Loaded
Sep 02 13:13:37 sge00 kernel: RPC: Registered named UNIX socket transport module.
Sep 02 13:13:37 sge00 kernel: RPC: Registered udp transport module.
Sep 02 13:13:37 sge00 kernel: RPC: Registered tcp transport module.
Sep 02 13:13:37 sge00 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Sep 02 13:13:37 sge00 systemd-journal[98]: Journal started
Sep 02 13:13:37 sge00 systemd[1]: Started Apply Kernel Variables.
Sep 02 13:13:37 sge00 systemd[1]: Mounted POSIX Message Queue File System.
Sep 02 13:13:37 sge00 systemd[1]: Mounted Debug File System.
Sep 02 13:13:37 sge00 systemd[1]: Mounted Huge Pages File System.
Sep 02 13:13:37 sge00 systemd[1]: Started Remount Root and Kernel File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Starting Load Random Seed...
Sep 02 13:13:37 sge00 systemd[1]: Activating swap /swapfile...
Sep 02 13:13:37 sge00 systemd[1]: Started udev Coldplug all Devices.
Sep 02 13:13:37 sge00 systemd-modules-load[92]: Inserted module 'nfs'
Sep 02 13:13:37 sge00 kernel: FS-Cache: Netfs 'nfs' registered for caching
Sep 02 13:13:37 sge00 systemd-modules-load[92]: Inserted module 'vboxguest'
Sep 02 13:13:37 sge00 kernel: input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input1
Sep 02 13:13:37 sge00 kernel: vboxguest: major 0, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
Sep 02 13:13:37 sge00 kernel: vboxguest: Successfully loaded version 4.2.16_OSE (interface 0x00010004)
Sep 02 13:13:37 sge00 systemd-modules-load[92]: Inserted module 'vboxsf'
Sep 02 13:13:37 sge00 kernel: vboxsf: Successfully loaded version 4.2.16_OSE (interface 0x00010004)
Sep 02 13:13:37 sge00 systemd-modules-load[92]: Inserted module 'vboxvideo'
Sep 02 13:13:37 sge00 systemd[1]: Started Load Kernel Modules.
Sep 02 13:13:37 sge00 systemd[1]: Mounting Configuration File System...
Sep 02 13:13:37 sge00 kernel: [drm] Initialized drm 1.1.0 20060810
Sep 02 13:13:37 sge00 kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Sep 02 13:13:37 sge00 kernel: [drm] No driver support for vblank timestamp query.
Sep 02 13:13:37 sge00 kernel: [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
Sep 02 13:13:37 sge00 systemd[1]: Mounted FUSE Control File System.
Sep 02 13:13:37 sge00 systemd[1]: Started udev Kernel Device Manager.
Sep 02 13:13:37 sge00 systemd[1]: Starting Local File Systems (Pre).
Sep 02 13:13:37 sge00 systemd-udevd[106]: starting version 204
Sep 02 13:13:37 sge00 systemd[1]: Reached target Local File Systems (Pre).
Sep 02 13:13:37 sge00 systemd[1]: Mounting RPC pipe filesystem...
Sep 02 13:13:37 sge00 systemd[1]: Starting Local File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Local File Systems.
Sep 02 13:13:37 sge00 systemd[1]: Starting Recreate Volatile Files and Directories...
Sep 02 13:13:37 sge00 systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...
Sep 02 13:13:37 sge00 systemd[1]: Mounted RPC pipe filesystem.
Sep 02 13:13:37 sge00 systemd[1]: Mounted Configuration File System.
Sep 02 13:13:37 sge00 systemd[1]: Started Load Random Seed.
Sep 02 13:13:37 sge00 systemd-journal[98]: Allowing system journal files to grow to 4.0G.
Sep 02 13:13:37 sge00 systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Sep 02 13:13:37 sge00 systemd[1]: Started Recreate Volatile Files and Directories.
Sep 02 13:13:37 sge00 systemd[1]: Starting Update UTMP about System Reboot/Shutdown...
Sep 02 13:13:37 sge00 systemd[1]: Started Update UTMP about System Reboot/Shutdown.
Sep 02 13:13:37 sge00 systemd[1]: Activated swap /swapfile.
Sep 02 13:13:37 sge00 systemd[1]: Starting Swap.
Sep 02 13:13:37 sge00 systemd[1]: Reached target Swap.
Sep 02 13:13:37 sge00 systemd[1]: Starting System Initialization.
Sep 02 13:13:37 sge00 systemd[1]: Reached target System Initialization.
Sep 02 13:13:37 sge00 systemd[1]: Starting D-Bus System Message Bus Socket.
Sep 02 13:13:37 sge00 systemd[1]: Listening on D-Bus System Message Bus Socket.
Sep 02 13:13:38 sge00 systemd[1]: Started SGE Execution Daemon.
Sep 02 13:13:38 sge00 swapon[116]: swapon: /swapfile: insecure permissions 0777, 0600 suggested.
Sep 02 13:13:38 sge00 kernel: ACPI: AC Adapter [AC] (on-line)
Sep 02 13:13:37 sge00 sshd[155]: Server listening on 0.0.0.0 port 22.
Sep 02 13:13:37 sge00 sshd[155]: Server listening on :: port 22.
Sep 02 13:13:37 sge00 slapd[156]: @(#) $OpenLDAP: slapd 2.4.35 (May 20 2013 16:33:13) $
Sep 02 13:13:37 sge00 slapd[168]: bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
Sep 02 13:13:37 sge00 slapd[168]: slapd starting
Sep 02 13:13:38 sge00 kernel: parport_pc 00:03: reported by Plug and Play ACPI
Sep 02 13:13:38 sge00 kernel: input: PC Speaker as /devices/platform/pcspkr/input/input2
Sep 02 13:13:38 sge00 kernel: microcode: CPU0 sig=0x306a9, pf=0x1, revision=0x0
Sep 02 13:13:38 sge00 kernel: microcode: CPU1 sig=0x306a9, pf=0x1, revision=0x0
Sep 02 13:13:38 sge00 kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Sep 02 13:13:38 sge00 kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Sep 02 13:13:38 sge00 kernel: ACPI: Battery Slot [BAT0] (battery present)
Sep 02 13:13:38 sge00 kernel: ACPI: Power Button [PWRF]
Sep 02 13:13:38 sge00 CLCGenomicsServer[163]: Starting CLCGenomicsServer
Sep 02 13:13:38 sge00 kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
Sep 02 13:13:38 sge00 slim[166]: /usr/bin/xauth: file /var/run/slim.auth does not exist
Sep 02 13:13:38 sge00 slim[166]: X.Org X Server 1.14.2
Sep 02 13:13:38 sge00 slim[166]: Release Date: 2013-06-25
Sep 02 13:13:38 sge00 slim[166]: X Protocol Version 11, Revision 0
Sep 02 13:13:38 sge00 slim[166]: Build Operating System: Linux 3.9.7-1-ARCH x86_64
Sep 02 13:13:38 sge00 slim[166]: Current Operating System: Linux sge00 3.10.10-1-ARCH #1 SMP PREEMPT Fri Aug 30 11:30:06 CEST 2013 x86_64
Sep 02 13:13:38 sge00 slim[166]: Kernel command line: root=/dev/sda1 rw initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Sep 02 13:13:38 sge00 slim[166]: Build Date: 01 July 2013 10:48:42AM
Sep 02 13:13:38 sge00 slim[166]: Current version of pixman: 0.30.2
Sep 02 13:13:38 sge00 slim[166]: Before reporting problems, check http://wiki.x.org
Sep 02 13:13:38 sge00 slim[166]: to make sure that you have the latest version.
Sep 02 13:13:38 sge00 slim[166]: Markers: (--) probed, (**) from config file, (==) default setting,
Sep 02 13:13:38 sge00 slim[166]: (++) from command line, (!!) notice, (II) informational,
Sep 02 13:13:38 sge00 slim[166]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Sep 02 13:13:38 sge00 slim[166]: (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 2 13:13:37 2013
Sep 02 13:13:38 sge00 slim[166]: (==) Using config directory: "/etc/X11/xorg.conf.d"
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension Generic Event Extension
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension SHAPE
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension MIT-SHM
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XInputExtension
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XTEST
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension BIG-REQUESTS
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension SYNC
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XKEYBOARD
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XC-MISC
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension SECURITY
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XINERAMA
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XFIXES
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension RENDER
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension RANDR
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension COMPOSITE
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension DAMAGE
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension MIT-SCREEN-SAVER
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension DOUBLE-BUFFER
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension RECORD
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension DPMS
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension X-Resource
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XVideo
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XVideo-MotionCompensation
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XFree86-VidModeExtension
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XFree86-DGA
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension XFree86-DRI
Sep 02 13:13:38 sge00 kernel: ACPI: Sleep Button [SLPF]
Sep 02 13:13:38 sge00 slim[166]: Initializing built-in extension DRI2
Sep 02 13:13:38 sge00 slim[166]: Loading extension GLX
Sep 02 13:13:38 sge00 kernel: hidraw: raw HID events driver (C) Jiri Kosina
Sep 02 13:13:38 sge00 kernel: ppdev: user-space parallel port driver
Sep 02 13:13:38 sge00 kernel: usbcore: registered new interface driver usbhid
Sep 02 13:13:38 sge00 kernel: usbhid: USB HID core driver
Sep 02 13:13:38 sge00 kernel: input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input5
Sep 02 13:13:38 sge00 kernel: hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
Sep 02 13:13:38 sge00 kernel: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
Sep 02 13:13:38 sge00 kernel: e1000: Copyright (c) 1999-2006 Intel Corporation.
Sep 02 13:13:38 sge00 kernel: Adding 1048572k swap on /swapfile. Priority:-1 extents:5 across:1105916k FS
Sep 02 13:13:38 sge00 kernel: input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
Sep 02 13:13:38 sge00 systemd-logind[158]: Watching system buttons on /dev/input/event3 (Power Button)
Sep 02 13:13:38 sge00 systemd-logind[158]: Watching system buttons on /dev/input/event4 (Sleep Button)
Sep 02 13:13:38 sge00 kernel: e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:3d:4f:34
Sep 02 13:13:38 sge00 kernel: e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
Sep 02 13:13:38 sge00 systemd[1]: Found device PRO/1000 MT Desktop Adapter.
Sep 02 13:13:38 sge00 systemd[1]: Starting dhcpcd on enp0s3...
Sep 02 13:13:38 sge00 systemd-udevd[128]: renamed network interface eth0 to enp0s3
Sep 02 13:13:38 sge00 sgeexecd[161]: starting sge_execd
Sep 02 13:13:38 sge00 dhcpcd[239]: version 6.0.5 starting
Sep 02 13:13:38 sge00 kernel: IPv6: ADDRCONF(NETDEV_UP): enp0s3: link is not ready
Sep 02 13:13:38 sge00 kernel: e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
Sep 02 13:13:38 sge00 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp0s3: link becomes ready
Sep 02 13:13:38 sge00 sgemaster[162]: starting sge_qmaster
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: soliciting an IPv6 router
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: rebinding lease of 192.168.1.10
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: carrier lost
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: carrier acquired
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: soliciting an IPv6 router
Sep 02 13:13:38 sge00 dhcpcd[239]: enp0s3: rebinding lease of 192.168.1.10
Sep 02 13:13:39 sge00 slim[166]: pam_unix(slim:session): session opened for user sgeuser by (uid=0)
Sep 02 13:13:39 sge00 systemd-logind[158]: New session 1 of user sgeuser.
Sep 02 13:13:39 sge00 systemd-logind[158]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
Sep 02 13:13:40 sge00 slim[166]: /usr/bin/xauth: file /home/sgeuser/.Xauthority does not exist
Sep 02 13:13:40 sge00 slim[166]: /home/sgeuser/.xinitrc: line 18: FontPath: command not found
Sep 02 13:13:40 sge00 slim[166]: openbox: error while loading shared libraries: librsvg-2.so.2: cannot open shared object file: No such file or directory
Sep 02 13:13:44 sge00 dhcpcd[239]: enp0s3: leased 192.168.1.10 for 86400 seconds
Sep 02 13:13:44 sge00 dhcpcd[239]: enp0s3: adding host route to 192.168.1.10 via 127.0.0.1
Sep 02 13:13:44 sge00 dhcpcd[239]: enp0s3: adding route to 192.168.1.0/24
Sep 02 13:13:44 sge00 dhcpcd[239]: enp0s3: adding default route via 192.168.1.1
Sep 02 13:13:44 sge00 dhcpcd[239]: forked to background, child pid 648
Sep 02 13:13:44 sge00 systemd[1]: Started dhcpcd on enp0s3.
Sep 02 13:13:44 sge00 systemd[1]: Starting Network.
Sep 02 13:13:44 sge00 systemd[1]: Reached target Network.
Sep 02 13:13:44 sge00 systemd[1]: Starting RPC Bind...
Sep 02 13:13:44 sge00 systemd[1]: Starting Apache Web Server...
Sep 02 13:13:44 sge00 systemd[1]: Started RPC Bind.
Sep 02 13:13:44 sge00 systemd[1]: Starting NFS server...
Sep 02 13:13:44 sge00 apachectl[650]: httpd: Could not reliably determine the server's fully qualified domain name, using 192.168.1.10 for ServerName
Sep 02 13:13:44 sge00 systemd[1]: Starting RPC Port Mapper.
Sep 02 13:13:44 sge00 systemd[1]: Reached target RPC Port Mapper.
Sep 02 13:13:44 sge00 systemd[1]: Starting RPC GSS-API client-side daemon...
Sep 02 13:13:44 sge00 systemd[1]: Started RPC GSS-API client-side daemon.
Sep 02 13:13:44 sge00 kernel: Installing knfsd (copyright (C) 1996 [email protected]).
Sep 02 13:13:44 sge00 kernel: NFSD: starting 90-second grace period (net ffffffff81893040)
Sep 02 13:13:44 sge00 systemd[1]: Started NFS server.
Sep 02 13:13:44 sge00 systemd[1]: Starting NFS Mount Daemon...
Sep 02 13:13:44 sge00 systemd[1]: Starting NFSv4 ID-name mapping daemon...
Sep 02 13:13:44 sge00 systemd[1]: Started NFSv4 ID-name mapping daemon.
Sep 02 13:13:44 sge00 rpc.mountd[682]: Version 1.2.8 starting
Sep 02 13:13:44 sge00 systemd[1]: Started NFS Mount Daemon.
Sep 02 13:13:45 sge00 systemd[1]: PID file /run/httpd/httpd.pid not readable (yet?) after start.
Sep 02 13:13:45 sge00 systemd[1]: Started SGE Execution Daemon.
Sep 02 13:13:45 sge00 systemd[1]: Starting SGE Execution Daemon...
Sep 02 13:13:45 sge00 lmx-serv-clcbio[690]: LM-X License Server v3.6.1 (Linux_x64)
Sep 02 13:13:45 sge00 lmx-serv-clcbio[690]: Copyright (C) 2002-2010 X-Formation. All rights reserved.
Sep 02 13:13:45 sge00 systemd[1]: Started SGE Execution Daemon.
Sep 02 13:13:45 sge00 systemd[1]: Started SGE Execution Daemon.
Sep 02 13:13:46 sge00 systemd[1]: Started Apache Web Server.
Sep 02 13:13:46 sge00 systemd[1]: Starting Multi-User System.
Sep 02 13:13:46 sge00 systemd[1]: Reached target Multi-User System.
Sep 02 13:13:46 sge00 systemd[1]: Starting Graphical Interface.
Sep 02 13:13:46 sge00 systemd[1]: Reached target Graphical Interface.
Sep 02 13:13:46 sge00 systemd[1]: Startup finished in 1.441s (kernel) + 8.969s (userspace) = 10.410s.
Sep 02 13:13:48 sge00 slapd[168]: conn=1000 fd=10 ACCEPT from IP=192.168.1.10:47238 (IP=0.0.0.0:389)
Sep 02 13:13:48 sge00 slapd[168]: conn=1000 op=0 BIND dn="" method=128
Sep 02 13:13:48 sge00 slapd[168]: conn=1000 op=0 RESULT tag=97 err=0 text=
Sep 02 13:13:51 sge00 dhcpcd[648]: enp0s3: no IPv6 Routers available
Sep 02 13:14:10 sge00 kernel: VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xffff88007b747810), OR(0x0), NOT(0xffffffff), flags(0x0)
Sep 02 13:14:50 sge00 su[755]: (to sgeuser) sgeuser on none
Sep 02 13:14:50 sge00 su[755]: pam_unix(su-l:session): session opened for user root by sgeuser(uid=1000)
Sep 02 13:19:33 sge00 kernel: hrtimer: interrupt took 1387321 ns
Sep 02 13:28:35 sge00 systemd[1]: Starting Cleanup of Temporary Directories...
Sep 02 13:28:35 sge00 systemd[1]: Started Cleanup of Temporary Directories.
Sep 02 14:39:38 sge00 su[755]: pam_unix(su-l:session): session closed for user root
Sep 02 14:44:39 sge00 su[807]: (to sgeuser) sgeuser on none
Sep 02 14:44:39 sge00 su[807]: pam_unix(su-l:session): session opened for user root by sgeuser(uid=1000)
Sep 02 14:46:34 sge00 rpc.mountd[682]: authenticated mount request from 192.168.1.162:1022 for /opt/gridengine/sge (/opt/gridengine/sge)
Last edited by teetee1 (2013-09-02 19:34:30)

Thanks. The problem is solved.
Both openbox and lxsession were installed. The only thing missing was the missing libsvg library. Here is the relevant entries in /var/log/pacman.log (when I installed the libsvg package just now)
# egrep -ri svg /var/log/pacman.log
[2013-09-02 14:52] [PACMAN] Running 'pacman --color auto -S extra/librsvg'
[2013-09-02 14:52] [PACMAN] installed librsvg (1:2.37.0-1)
so somehow it wasn't needed on a working lxde since 08/28 when the system was installed, and right after 3.10.10 kernel upgrade(Sat., 8/31), it is required to have the windows manager working properly. 3.10.10 linux kernel change log from https://www.kernel.org/pub/linux/kernel … og-3.10.10 did not return anything relevant.
Anyway thanks for the input and I'm glad that the problem was solved quickly.
Last edited by teetee1 (2013-09-02 19:36:39)

Borders missing in PDF/Word doc.

Hello all,
I've got a number of images to which I've applied borders in
the development environment. These appear when I build Microsoft
HTML Help, but are missing in either the PDF or .DOC output. I've
looked around quite a bit, but can't find any settings that would
explain this.
Thoughts anyone?
Thanks in advance,
Christian Tobler
Smiths Detection, Inc.

You probably manually added the borders, right? If you create
a style (such as ImageBordered) and assign it to the image, the
style should get mapped to the Word/PDF output.
Good luck,
Leon

Borders in Matrix with Group Report Missing in Web view

Please help.
I have a matrix with group report. When it is viewed in Report Builder live preview is fine, but when I preview in web I got two problem
Problem 1 - preview as HTML
No borders? all my cell borders, frame borders gone missing.
Problem 2 - preview as HTML CSS
The borders are there, but some data in the matrix report displayed wrongly.
For example, the data is "01 APR 2000 1800 - 20 APR 2000 2000", what is showing in the web view is actually
"01"
"APR"
2000
1800
i.e., is broken down into few lines.
Can anyone please help. Btw I am using Oracle Report 6i.
Thanks.
Joshua

For Simple HTML output, you can only get horizontal lines out of Reports. You will lose all vertical lines as well as other graphical objects (eg: polygons, polylines, etc.) This is because these objects are not supported natively within HTML.
However, for HTMLCSS, you should be able to get a lot closer since rectangles are supported. Though again; polygons, polylines, etc. are not supported.
Not sure what is happening to your text, possibly an issue with browser settings or you may need to reduce the font size in Reports to get what you want.
As has already been suggested, for better WYSIWYG output for the web from Reports, PDF is the way to go.

Width of JInternalFrame's Borders?

Hello all.
How can I determine the width, and height, of the borders surrounding a JInternalFrame?
I am needing to set a JPanel, which takes up the entire contents of the JInternalFrame, to a certain size. Setting the JPanel's size doesn't seem to force the JIF to expand, and setting the JIF to the proper dimensions uses the outside of the frame to that size... I'm hoping to find a way to set the inside.
Thanks for any help!

I am trying to make a JInternalFrame that wraps around a JPanel of a certain size. So for example, if we have a JPanel of size 400 x 500, I want to make a JInternalFrame that wraps around it. There is a problem, if you instatiate a JInternalFrame, then you need to specify its size. How do I know what size to specify for the JInternalFrame so that it perfectly wraps around a JPanel of size 400 x 500? You can't simply make them of equal size, because then it would make the JInternalFrame 400 x 500, and shrink the JPanel inside by the amount of the Insets + the height of the title bar. Size of Insets is easy to find, but not the height of the title bar. Once I know the height of the title bar, I can easily create a JInternalFrame with the size to perfectly wrap around a JPanel. The problem here is that we know the size of the JPanel first, and so the size of the JInternalFrame depends on the size of the JPanel. There is no way to change that. Any help would be greatly appreciated.

Borders missing when displated as HTML on Web

Hi All,
I have created a matrix report and trying to publish it to the
web in HTML format. The borders are missing when published on
the Web. I tried to draw a line, but it does not help. I have
seen in these forums that it is a restriction. But can anyone
tell me any workaround and how you guys have implemented it.
Thanks
Chithan

hello,
first thing, i would use HTMLCSS as this format produces a more
accurate output.
there are restrictions with HTML(CSS) as it does not support the
creation of graphic-objects (lines, boxes, etc.) those will not
be visable in HTML(CSS); tableborders are basically graphical
objects around the datacells, therefore not available in HTML
(CSS).
regards,
the oracle reports team --pw

HTML Printing with JEditorPane table borders is missing...

Hi,
My application prints HTML reports that was rendered on a JEditorPane,
actually the printing is working fine (almost)...
After reading a lot of posts and the Printing API i've found a very god aproach to print HTML documents... the DocumentRenderer:
http://www.fawcette.com/javapro/2002_12/online/print_kgauthier_12_10_02/
I'm having a strange problem that I was unable to figure out by myself...
Table borders and table background images never get printed...
ex: <TABLE BORDER=1 ...
<td background="image.gif" ...
On the JEditorPane it shows just fine but, when the page is printed there's no border or table background pictures...
Everything else is printed ok including images, small fonts, etc...
Does anyone else had the same problem ?
Thanks for any help

The borders present an interesting problem created by the way the DocumentRenderer class finds for printable Views in the HTML. DocumentRenderer searches recursively down the tree of Views starting with the Document's root view looking for leaf views, those with no children. The DocumentRenderer only paints these smallest chunks of text to the printer graphics context. This usually works because leaf views do not usually contain anything paintable.
The problem with borders is that they represent paintable areas of branch views, those with children. When we only print leaf views, these areas get ignored.
I see two logical solotions to the problem:
I. Change the code of the recursive printView method of Document Renderer to print any border that intersects with the current printable clip rectangle.
II. A much more elegant solution would be to print any view, branch or leaf, that fits within the current printable area, and cease the recursion there. This would include the borders.
It would also increase efficiency by terminating the recursive method earlier by painting larger chunks of the HTML. A strange problem pops up when I try this, however. When the size of the chunk to be printed gets too big, nothing is printed at all. In the article this is mentioned in the area of large images. "Lastly, large icons do not print. Java simply refuses to render them on the page. Small icons work quite well, however." The same holds true for any large View.
I have not been able to quantify the exact size where this failure occurs, nor what is causing it. If anyone can tell me what causes this problem, it should be fairly easy, depenging on the cause of the problem, to rewrite the class to print borders and also does lots of other good stuff. I have already coded the new and improved printView method, but this size limitation has made it unworkable.
Simply stated, if I can figure out why the class does not print large icons, the rest should be easy.
Any suggestions would be appreciated.
Thanks,
Kei Gauthier

Missing borders in JInternalFrame

Similar Messages

Maybe you are looking for