Missing btwhidcs.dll after 7zbv19ww.exe bluetooth update

Hi,
Eversince I tried unsuccesfully updateing my bluetooth driver using 7zbv19ww.exe I've got an error starting BTTray.exe during startup with the explanation that btwhidcs.dll is missing.
Could you please help me with getting this file back.
Thank you.

Hi adrijanr, and welcome to the Lenovo User Community!
Remember that this is users helping users here, moderated by volunteers like me. Although there is some Lenovo presence, they can't patrol the entire community.
Did you try uninstalling and reinstalling the Bluetooth drivers? Make sure Bluetooth is switched on (Fn-F5).
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer!

Similar Messages

I need help w/ This: missing gina dll after installation...

I need help w/ This: missing gina dll after installation of linksys adaptor on Win XP.
Thank you

I assume you are facing this error on wireless USB adapter ... WUSB54GC .... uninstall the adapter from all programs >> unplug & replug the adapter >> Install the drivers using found new hardware >>
Once installed use windows wireless configuration to connect to the wireless network .....
See if it works .....

HT1349 how do i repair a missing MSVCR80.dll for APSDaemon.exe?

How do I repair a missing MSVCR80.dll for APSDaemon.exe in itunes?

Click here and follow the instructions.
(98799)

TS1717 missing MSVCR80.dll after iTunes update and reinstall

Running Windows 8 and did latest update for iTunes and now it wont run, tried reinstall numerous times, same result. Missing MSVCR80.DLL file.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99263)

MISSING MSVCR80.DLL AFTER ATTEMPTING TO UPDATE ITUNES

I just recently saw an update to iTunes available so I go through the install. It gets almost done and then gives me an error message that it can't install and to try manually installing from the Tools menu in iTunes. Great.
Go to open iTunes and can't do it. Seems the failed install has deleted a .dll file iTunes needs. MSVCR80.dll is missing.
So I download iTunes from the Apple website and attempt to install from that. No luck. Can't seem to start Apple Services. Greeeeeeaaaaat.
Help.

Click here and follow the instructions.
(98853)

Missing MSVCR80.dll after the latest update solved.

To all of you who lost iTune after the latest update, obviously there were some kind of bugs at their end. Very annoying. But here is the fix you can do it yourself. And don't worry your iTune is intact inluding your library.
First, you have to uninstall every Apple product via Control Panel, Program Uninstall. In that list you should have 4 Apple items; Apple Applicaiton Support, Apple Mobile Device Support, Apple Software Update, and iTunes. Uninstall them one by one.
Imoortant ot re-boot the system.
Then go to www.apple.com/itunes/, and look for the download button. That's it. As you go through the steps, be sure to instll as amdministrator.
You should get back your old iTunes with nothing missing.

Apple have a recommended order for uninstalling the components, and there are some other tips below...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Missing MSVCR80.dll after upgrading itunes

I ran a recent update to itunes which failed and ever since I have had an error message MSVCR80.dll missing when I've tried to lead itunes. I've tried to reinstall the dll via the Microsoft website but had no joy...can anyone help please?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Missing MSVRC110.dll after installation of Photoshop

I've installed Photoshop and the MSVCR110.DLL is missing. I am unable to install the app (system says another app is trying to uninstall it). I could not locate a repair or reinstall option.

MSVCR110.dll is a part of Microsoft Visual C++ and is required to run programs developed with Visual C++. So you need VS C++ 2012. Go here: http://www.microsoft.com/en-us/download/details.aspx?id=30679
The redistributable can easily be downloaded on the Microsoft website as x86 or x64 edition. Depending on the software you wish to install you need to install either the 32 bit or the 64 bit version.
Source:How to Effectively Fix MSVCR110.dll Missing Error? | Fix EXE & DLL Errors

Why is ringtone in limbo in iTunes and missing from iPhone after last iOS 6 update?

I have a ringtone that I purchased that has now disappeared from my iPhone 5 after the last iOS 6 update. If I look in iTunes (which is an abomination in itself and not intuitive in any way), in the On This iPhone tab of the iPhone page, with Tones selected on the left hand side menu,
I see the ringtone "Stewie Mom Mom Mom" grayed out with a weird circle to the left of it . I have a second ringtone that is also visible there, with no weird circle.
If I go to the Tones tab of the iPhone page, I see that Sync Tones is checked and it shows 1 tone synched...the one without the weird circle shown in Tones.jpg is actually on my iPhone, so that is the 1 tone. No matter what I do to try to manually sync the tones to my iPhone, Stewie Mom Mom Mom is never copied to the iPhone.
Can somebody please tell me how to get this orphan ringtone back on my iPhone? What does the weird circle mean? I've gone to the iTunes store on my phone and also in the iTunes app on my computer and in both places when I view the ringtone in the store, it's acting like I never purchased it. It's not like $1.29 is so much that I wouldn't pay for the ringtone again, but honestly I don't trust that the ringtone won't be orphaned again and again, and I'm not just going to keep buying it over and over. HELP!

This happened to me to.
It took me a while to figure out a solution, but this may or may not work for you.
Long story short, previous versions of iTunes used the Ringtones folder to store all tones, but now iTunes uses the Tones folder.
(I had copied my library of music from one computer to another, where the old computer used an older version of iTunes. I assume most users aren't affected by this, because they normally just upgrade iTunes on their primary computer, and the upgrade process probably takes care of renaming the Ringtones folder to Tones)
For example, my media folder is set to be:
C:\Users\vincetg2\Music
so all my old tones files were in:
C:\Users\vincetg2\Music\Ringtones
but iTunes was expecting them to be in:
C:\Users\vincetg2\Music\Tones
To solve this, I moved all the files in the 'old' Ringtones folder to the 'new' Tones folder (you should create it if it's not already there):
then dragged the files into iTunes' Tones section:
and then synced (erase and sync) the tones over to my iPhone:
I hope this helps!

Missing Boot Camp after 10.6.2 update

I have just updated from 10.6.1 to 10.6.2 through software update facility. I noticed my boot camp disk (a separate disk inside my my Mac Pro) is now missing. I can't see it in disk utilities or Tech Tool Pro. How do I find out if it is still there or physically broken. Luckily it's only used for testing websites so not urgent but can someone shed some light maybe?
Thanks!

scoutusmaximus wrote:
I have just updated from 10.6.1 to 10.6.2 through software update facility. I noticed my boot camp disk (a separate disk inside my my Mac Pro) is now missing. I can't see it in disk utilities or Tech Tool Pro.
what exactly do you mean? what do you see in disk utility when you select your whole hard drive? also, click on the partition tab. what do you see there?
How do I find out if it is still there or physically broken. Luckily it's only used for testing websites so not urgent but can someone shed some light maybe?
Thanks!

Video chat missing in talk after 2.3.4 update

Why is the version of talk that is suppose to have video chat capability missing in the Incredible 2'2 Gingerbread (2.3.4) update???

Make sure you backup everything
Settings -> privacy -> Back up my data and Automatic restore should be selected
and also
Use one of these links to download the
Backup & Restore app
http://forum.xda-developers.com/showthread.php?t=1193802
or
http://www.elita-clan.com/downloads/backup_and_restore_v010935.apk
http://www.elita-clan.com/downloads/backup_and_restore_v010935.apkor
http://www.mediafire.com/?1n07llajeaoo03y
How to install it
You need to
go to settings -> applications -> check unknown sources
download IO File Manager
https://market.android.com/details?id=org.openintents.filemanager&feature=search_result
download the backup & restore app, transfer it to your SD card, use OI file manager to find it -> tap on it -> install it
Contacts
just to play it safe sync your contacts w/ google if you haven't already
open your phonebook
press MENU button -> tap on Send Contacts -> select all -> send it to your email
on your computer
-> download the file -> go to your gmail -> click on contacts -> click on more actions -> on the drop down menu click on "import" -> choose the file -> and click import
Apps
Don't worry so much about backing up your apps
on your computer go to
market.android.com -> log in -> click on My Library -> and send all your apps to your phone
SMS/MMS
if you don't want to use the backup & restore app then
Install "backup SMS" to back up your SMS and MMS to your Gmail
https://market.android.com/details?id=com.zegoggles.smssync&feature=search_result
or your SMS use
"backup & restore SMS"
https://market.android.com/details?id=com.riteshsahu.SMSBackupRestore&feature=search_result
or for your MMS use "Save MMS"
https://market.android.com/details?id=com.schwimmer.android.mmsextract&feature=search_result
Call Logs
And for call logs this is great
https://market.android.com/details?id=com.yang.android.ansta

Missing Display Setting after 10.5.6 Update

Several days ago, I updated all three Macs from 10.5.5 to 10.5.6 -- each separately via Software Update. All went smoothly. However, with the mini, I have an HP w2007 20" monitor that prefers a setting of 1680 x 1050 @ 60 Mhz. Under .5, not a problem. However, all of the 1680 x 1050 settings are missing from the Display control panel since the .6 update. Does anyone have a clue as to how I can get the 1680's back?

That was not successful in terms of reacquiring the 1680's. The update went smoothly. The list in the settings skips from 1600x1200@100Mhz to 1920x1440@60Mhz. This is the same as before the update.
Any other ideas? I did see a mention on MacFixIt that others have experienced this problem but there were no suggestions regarding a fix.

My iphone 3G is missing the camera after i did an update, how do i get it back

I just updated my Iphone 3G this past weekend and went to take a picture at a birthday party and couldn't because my camera app is not on my phone anymore, What is the deal? Where did it go and how do I get it back? This just *****

Try this:
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors

Missing Library Folder after 10.9.4 update

I recently competed the 10.9.4 Update on my MacBook Pro, and have since lost access to the Library Folder. It used to be located on my computer in the following.
/Users/{User Name}/Library/Application Support/{Application}/{File Name}
Has anyone had success in retrieving this folder? I am able to still save content to this folder, however it is not there for me to access the folder.

Thanks benwiggy. I have just installed Illustrator CS6 and am working my way through the lessons and have not been able to locate the Preferences file until now ... have spent ages on the internet trying to find the solution. Many people were suggesting doing the "defaults write com.apple.finder AppleShowAllFiles YES" solution. I was a little nervous doing this so carried on looking. Eventually found your suggestion of "Go To Folder and type ~/Library" and it worked! MANY THANKS!
Btw I couldn't do it via the Show View Options and Show Library Folder - I wasn't able to see that option ....
Anyway, thanks.

Missing carrier logo after 1.1.1 update?

I upgraded to 1.1.1 last night and I was just noticing the AT&T carrier logo is gone! I can place and receive calls, but no carrier logo! Is anyone else experiencing this? I have restarted the phone and the logo is still gone. I don't have my phone hacked or anything; just one ringtone that I used iToner to place on the phone.
Here's a pic, sorry for the bad picture quality...I'm at school and I just used photobooth to take the picture!
CLICK!

Try removing and re-installing the SIM card. That might do the trick. I'm not speaking from experience, just thinking that is the only thing you have not done yet. Who knows, it just might work.

Missing btwhidcs.dll after 7zbv19ww.exe bluetooth update

Similar Messages

Maybe you are looking for