Missing business systems in model configurator

Hello,
i am on PI 7.1 and have to configure a SRM scenario. In step "assign communication component" (business system) in the model configurator all business systems are missing.
Please the screenshot:
[http://img211.imageshack.us/i/bild1m.png/]
What configuration is missing? In SLD all business systems with software are maintained.
Thanks for help
Regards, Trevor

Dear Trevor,
Let me solve your problem,
In the snapshot it says clearly that "Search Criteria" Communication Component Selection "Value" for Product SAP SRM 7.0
Which means in SLD it will search for the Business Systems which got assigned with Product SAP SRM 7.0.
So please check your SRM Business System "MSRCLNT001_SRM" and assign the Product SAP SRM 7.0 to it in SLD.
If you couldn't find the Product in the SLD then you must update your Content Repository to latest level SAP_CR 6.6 in SLD.
Please check the note for SAP CR Update:
SAP Note 669669 - Updating the SAP Component Repository in the SLD
Similarly you may face the problem for your ERP as well, so select Product SAP ERP 6.0 EHP 4 if you are implementing the same.
Hope this is helpful.
Regards
Praveen K

Similar Messages

  • Problem in assign business systems in IB configuration

    Hi ,
    I have defined Technical systems,business systems properly in SLD and i also able to import my software components in Integragion Repository. i have defined all the data type , msgs types ,msg interface,msg mappings properly in IR.
    But my problem is when iam trying to assign business systems in IB configuration scenario.
    Business system list is not appearing in IB configuration.
    Thanks
    Hari

    Hi,
    Check the following..
    1) Check Whether that BS is already is Assigned to Another Scenario
    2) If it is Assigned to another scenario means, goto Objects TAB -
    Expand Service With out Party
    Business sysemRight click---Add to scenario( Select ur scenario)
    3) Do SLD Cache through Envoronment----SLD Cache
    once you do this..
    1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
    2) Say Continue-Say Continue Select ur BS
    3) Un check the Check Box Bottom of the Window
    go throgh these blogs too..
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    /people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
    Thanks,
    Vijaya.

  • SLD Configuration - Technical System and Business System

    Hello,
    I have installed SAP Solution Manager with local SLD and i want to use this system as Central SLD for my System Landscape. Later on i have installed other SAP Products like ECC,BI,PI etc.
    Some of the systems i registered with previously defined SLD in Solution Manager, but some system i forgot to register with SLD during installation.
    I am not sure or aware what is the difference between SLD configuration during installation and after installation.
    If i have Register the System during installation will it register automatically with SLD or we have to do manually.
    If i have not register system during installation and later on i want to register particular system with SLD what is procedure for that.
    Can some one share knowledge on What is Technical Systems and Business System in SLD Configuration, i tried to do some activity for SLD Configuration but after seeing above both terms i was confused so for time being i stopped this activity.
    Looking forward for kind response.
    Best Regards,
    V.Singh

    Hello
    try to go through these
    http://help.sap.com/saphelp_nwesrce/helpdata/en/45/4208934d7f1193e10000000a1553f7/content.htm
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/652b1f46-0a01-0010-25ae-e7cb07b55414

  • Configure Role of Business System " as Central Integration Server , PI

    Hi Experts,
    I am running transaction code IDX5 in my xi system it is showing as "system is not a central integration server unable to start the program ".In SXMB_ADM role of business system need to configured .If we need to configure how to do this .
    Regards
    Praveen

    Hi Praveen,
    For configuration of integration server please go to SXMB_ADM>In configuration choose Integration engine configuration->And add one runtime parameter IS_URL...and specify the role  of business system as  Integration server and specify the corresponding Integration server i.e dest://httpdestination. This destination is RFC destination that should be created in PI sytem of type 'H 'which contains the target host as host name of PI system and path prefix as  '/sap/xi/engine?type=entry'.
    Thanks & Regards,
    Priyanka Anagani

  • ** Not able to see my business system in our XI server - ABAP Stack

    Hi Friends,
    When I try to execute the function module 'LCR_LIST_BUSINESS_SYSTEMS', I able to see all the business systems which I am maintaining in the SLD of XI. But, few business systems are missing. I want to see that system thru this function module. Moreover, when I try to execute the tcode 'SLDCHECK' it shows error in one place of the screen for this function module. But, at the end of the summary it shows the message successfully.
    Friend, how do I add the missing business systems thru the above FM?
    Kindly help me.
    Kind Regards,
    Jegathees P

    Hi Friends,
    I have tested the destinations TCP/IP connections 'LCRSAPRFC' & 'SAPSLDAPI' from our XI system. Its working fine. My user id is also having the role 'SAP_XI_APPL_SERV_USER'. So, I think there is no problem in the RFC issues.
    The exact error message while run SLDCHECK is as below.
    17.09.2007                                                          Exchange Infrastructure: Test LCR Connection                                                                 1
    Properties of RFC destination SAPSLDAPI
      RFC host:        %%RFCSERVER%%
      program id:      SAPSLDAPI_XID
      gateway host:    aprins10
      gateway service: sapgw10
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    SLD server access settings:
      host name:   aprins10.aprilbiztec.local
      port number: 51000
      user       : XIAPPLUSER
    Use transaction SLDAPICUST if you wish to maintain the SLD server access data
    Launching the SLD GUI in a separate browser window...
    => Verify in the browser GUI that the SLD is in a healthy running state!
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server...
    Function call returned exception code     4
    => Check whether the SLD is running!
    Summary: Connection to SLD does not work
    => Check SLD function and configurations
    Now checking access to the XI Profile
    Properties of RFC destination LCRSAPRFC
      RFC host:        %%RFCSERVER%%
      program id:      LCRSAPRFC_XID
      gateway host:    aprins10
      gateway service: sapgw10
    Testing the RFC connection to the SLD java client...
    RFC ping was successful
    Calling function EXCHANGE_PROFILE_GET_PARAMETER
    Retrieving data from the XI Profile...
    Function call terminated sucessfully
    Retrieved value of
    section   = Connections
    parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
    -> value  =
    Summary: Connection to the XI Profile works correctly
    See the 3rd from the function module LCR_LIST_BUSINESS_SYSTEMS.
    Friends,  what could be the problem not to see the business system thru the above FM? But, the Business System works fine in RFC to RFC scenarios.
    Kindly help me friends to solve this issue.
    Kind Regards,
    Jeg P.

  • Parties, Business Systems and Business Services

    Hi guys,
    I've read a lot about items in subject, but have some doubts about applying them to my scenario. I have to integrate SAP system and web service.
    As far as I understand concepts, this is B2B communication, so I have to use parties. To represent SAP system I use Business System, as it's described ins SLD,  and for Web service I use Business Service... just as we use business services for web services
    --- Am I right here? Will it work ok in reciever determination, agreement?
    Thank you.

    Hi,
    You are doing the usage of business systems and services in proper way.
    The scenario will difinately work with combination of business system and service.
    It will be fine for all other configurations such as Receiver Determination, Sender/receiver agreements and interface determination etc.
    Please see below the importance of Parties, Business Systems and Business Services 
    A communication party
    A communication party (party for short) represents a larger unit, which is involved in a collaborative process. Using a communication party, you generally address a company within a cross-company process. 
    You can assign a communication party one or more services to address it as the sender or receiver of messages.
    A business system
    If you want to address a particular business system as the sender or receiver of messages, choose this service type.
    A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
    You usually use business system services when configuring internal company processes.
    A business service
    If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details. 
    For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
    Thanks
    Swarup

  • Business Service -- Business System

    Hi all,
    I've read several tutorials about scenarios in XI and have seen that sometimes business services are used and in some cases they use business systems to implement a communication partner. When do I use business services and when do I use business systems?
    Thanks in advance and regards,
    Marc

    Hi Marc,
    You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
    Business System is always configured in SLD and you use it when you have all the data you need to connect to the partner system
    Michal: correct me if I am wrong.
    Regards,
    Padmaja

  • What is the difference between Business System and Business Service?

    Hi
    Please tell me what is the difference between Business System and Business Service...? In real time at what situation we will use Business System and in what situations we will use Business Service..? Please help me
    Best Regards
    Ravi Shankar B

    HI,
    Business system:
    If you want to address a particular business system as the sender or receiver of messages, choose this service type.
    A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
    You usually use business system services when configuring internal company processes.
    Business Service:
    If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details. 
    For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
    Regards,
    Sudheer.

  • Business System  and Business Service

    Hi,
        A lot of confusion in this situation .When we will go for a  Business System.. and When we will  choose Business Service...we are using some SAP systems  only.. even though we are configuring those as a business services...
    can any one clarrify some clearly..
    Thanks
    babu

    <b>URL</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm and then navigate back up the tree to the <b>Service</b> heading
    I have provided an excerpt from the documentation
    <b>Business System</b>
    If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
    If you want to address a particular business system as the sender or receiver of messages, choose this service type.
    A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
    You usually use business system services when configuring internal company processes.
    <b>Business Service</b>
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details. 
    For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.

  • Business systems

    is it possible to send and receive the data by using only one business systemses for both sender communication channel and receiver communication channel

    hi Ramakrishna,
    yes it is possible to send and receive the data through one Business System.
    in Integration Directory (ID) add your Business System to your Configuration Scenario.
    use that Business System to your Sender and Receiver communication Channels.
    and one more is you can also use the same Business System for another Configuration Scenario too.
    Cheers,
    Ashok.

  • Assign Business System in Integration Directory

    Hi all,
    i have basic question.
    in my ID, there are some configuration scenarios.
    for example, the left side look like,
    in case,one of Business System created on SLD was assigned to one of configuration scenarios,
    i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
    can i assign BS1 to several configuration  scenarios?
    or should i create Main scenario in order to define communication channel?
    thanks in advance
    venjamin

    Hi venjamin
    Yes, you can assign the same business system to different configuration scenarios.
    to do this there are 2 ways.
    1. Open the cofiguration scenario to which the business system has already been  assigned.
    Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
    assign your business system.
    2. Select the objects tab>service without party> business system> your business system> right click-->
    assign to scenario and then select your scenario.
    Hope this helps,
    Regards,
    bhavesh
    Message was edited by: Bhavesh Kantilal

  • ABAP proxy client call PI with new client 120 in old business system

    Hi all
    We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
    CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
    My question is If we go to the SLD and
    |-> Click on Business System
    |-> Add new client 120
    Will it work or we need to do some extra configuration for communication channel.
    Also please let me know how to configure Integration Directory for sender agreement, Receiver Agreement and the communication channel.
    Thanks in Advance.

    Hi Naina ,
    We have a requirement to call PI from ABAP client proxy in synchronous mode via a CRM client 120.
    CRM client 100 is already configured in the Business system talked above but now we need the same business system to be configured for client 120 as well.
    My question is If we go to the SLD and
    |-> Click on Business System
    |-> Add new client 120
    > hope the technical entry of CRM is already in SLD . So you just need to make a business system entry . point the business sytem to the technical system entry with the right client here 120 .
    Will it work or we need to do some extra configuration for communication channel.
    > since sender is client proxy you don't need to do anything in case of receiver proxy you will be needing reciver communication channel of XI adapter type .
    for proxy based communication your application system(other than PI/XI) should be able to make a proxy call to XI or receive a call from XI .for this purpose you need to make some settings at R/3( or CRM level)
    For this check blog  : /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    Abap proxies ( Client and Server proxies)
    Other steps i.e Interface determination/receiver determination are as usual .
    Regards ,

  • Reg. the Business Service and Business System(Integration Directory).

    Hi,
            I have a small doubt reg. the Business Service and Business System. When do we need to go for creating a Business Service AND a Business System? I want to know the difference b/w them and the usage of a Business Service as compared to a Business System. Generally I create Business Systems in my configuration scinerioes. Could anybody pl. clarify on this?
    Regards,
    Murthy

    Murthy,
    It's been already discussed so many times, Juz give a search option in the thread, you will find a lot.
    Anyhow,Please refer the below threads.
    Re: Business Service <--> Business System
    Business service or Business system??
    Business Service and Business system
    Diff b/w Business service & Business System?
    Business Service / Business System
    business system and business service
    Best regards,
    raj.

  • Tutor: Simpe Use Cases: Can't find Business System in ID

    Hi everybody,
    I am doing the turorial of SAP's "simple Use Cases" PDF.
    On Page 10 I have to define Services without Party
    1) Objects tab -> Service without party
    2) Context Menu --> Assign Business System
    3) Continue
    4) Continue
    5) Select business system by using checkbox ???
    Here I can't find the business systems I defined in the SLD (Site 10 of tutorial)
    What did I wrong?
    Thanks in advance, Mario

    Hi Mario,
        In the Integration Directory, go to the second tab 'Objects'. In that you can find the node 'Service without Party'. Right click your mouse on that node and then choose 'Assign Business System'.
       You'll get a pop up click and continue till it reaches the third step in the pop up and then select the name of the business systems you have configured in SLD by selecting check boxes and on pressing 'Finish' button you'll have your business systems in your ID.
    Cheers
    JK
    PS: Award Points if this helps you

  • Model Configurator - Business System not listed

    Hello,
    I have the following problem when using the model configurator to create a configuration scenario based on an integration scenario.
    I want to assign a communication component to a product. However the according communication component is not listed in the value list for a specific product.
    I have added the product to the business system (installed) in the SLD and also cleared the SLD cache. However the communication component is still not listed.
    Any idea what else I could try?

    Hi, I have the same issue. How did you make it show up in the value list? The input box on Model Configurator won't simply let you type it in.

Maybe you are looking for

  • Any helpers please on JAVA XSLT Tranformation

    I have an XML file and a XSLT file How using a Java class can I tranform the document to XHTML (i.e html in XML format)

  • Cannot unlock to make admin changes

    Ever since installing Lion, my MBP has been very slow and I cannot make any admin changes.  In any event where admin privileges are needed, I hit the padlock on the bottom left of the window.  It asks for my password.  I enter it and it accepts, but

  • Seq Header Duplication error on build

    does anyone know what this error is or how to fix it? Compiling VTS#7 (fbi)... Writing VTS070.VOB Muxing VTS071.VOB Seq Header Duplication the simulator works perfectly, but when I am going to burn the disk I get this error when it tries to mux one o

  • N95 profile for reading Map

    I would like to create a N95 profile that does not dim the screen and does not lock the phone/keys after a certain time so that I can read the map and navigate (I have security phone/key lock on my General profile). I thought this was possible but an

  • How to deploy a WAR onto the NW AS?

    I have a WAR which runs quite well under Tomcat. I want now to deploy it onto the SAP NW AS. With which tool can I do this?