Missing calender entries

Hello all,
we often have problem syncing calender entries in an Enterprise environment :
Not all of the entries are synchronized, some are missing.
Thi smostly happens on big mailboxes (more than 15 GB), but it could occur on smaller ones also.
When we reset the user or installing a new iOS, the problem wents away, but you can't say how long it would be stable.
We're using iPad2 (64GB) with iOS 4.3.3, Novell GroupWise 8.0.2 as Corporate Mail System and Novell Data Synchronizer for communication between both.
Any suggestions ?
Best regards,
Cord Oberbracht

Hi,
Can the users see the missing items from OWA?
Have you checked the Deleted Items folder in your Outlook?
Does the users affected sync their calendar with handheld devices? This may cause the calendar item missing.
In addition, if the users are using Outlook in cached mode, please switch to online mode to check the result.
If they installed any anti-virus, please temporarily disable it and test the issue again.
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

Similar Messages

Options - Text Editor - C/C++ missing intellisense entry. Intellisense not working

Options -> Text Editor -> C/C++ missing intellisense entry. Intellisense not working. Solutions to turn options for the editor off and on are not working. The intellisense entry is present for other languages,
such as C#, but not C/C++.
By not working, I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.

Hi JerroldBrody,
Thank you for posting in MSDN forum.
>>I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.
Based on your issue, could you please share me a screen shot about the intellisense right click menu items are grayed out?
Generally, I know that it is default that we can enable the intellisense for C/C++ by going to the TOOLS->Options -> Text Editor -> C/C++ ->Advanced-> IntelliSense like the following screen shot.
So please try to check if you set Disable Intellisense property as False in the VS IDE.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I make a calender entry that makes a sound when it is its turn?

How can I make a calender entry that makes a sound when it is its turn?

Have you even looked at the calendar app? Did you not notice the "Alert" field in the event details when you create a calendar event?

Since 4.2 update calender entries made on phone don't update Outlook during

Any calender entries I make on my iPhone do not get updated into Outlook on my PC during sync.
Entries made in Outlook are updated OK in my iPhone and if I then edit the entry in iPhone it sync's properly in Outlook & vice versa.
There are no other sync issues.

I have an older iMac running 10.5.8 that I use to hold my media. I am running the latest upgrades of the OS for iTunes and Airport. I am trying to use the "Home Sharing" (HS) function of ATV without success. I have turned on the HS functions in the ATV software as well as in the preferences (where I have selected the files to be shared, all of them) and pull down menu of the iTunes software.
The internet is accessed through a cable modem using an ethernet cable to Airport and another cable to the iMac. ATV is via wireless to the Airport. Signal strength to the ATV is 4/5 bars and deemed adequate when I run the network checking software on ATV.
Thinking that it using the gen 1 iPad might help, I have tried to use that instrument to kick start HS. After going through the process of setting up HS, I am asked if I want to access a library. When I select that option I am told to open iTunes, select and select the iPad, but nothing happens after that. No joy.
I have turned off and on the router (Airport) and iTV. (I have not turned off and then on the cable modem) I have restarted the base computer and logged off of and on to iTunes. Turned of and reinitiated HS using "remote" on the iPad. I have checked the IP address, which starts out 172.xx.xx.x and seems to be correct. ... still no joy.
The ATV will access the internet and play trailers, podcasts as well as internet "radio". It is just not recognizing the poor lonesome iMAC.
Sadly, this is the first time I have had trouble with an Apple product that I could not resolve.
wimper
I have not had time to call Apple support.
I hope someone out there has some more suggestions.
Thanks in advance.

Why do I get "Missing signed entry" error?

I am distributing jar files that have been signed (by thawte). Sometimes, a certain build will throw up a "Missing signed entry" error when I try to launch the jnlp file.
Why does this happen?
I used add/remove programs (on Windows) to delete the cache.
I am really puzzled by this.
Anyone knows why?
thanks,
Anil

when I did a jar tvf on the obfuscated jar and compared output with a jar tvf on the unobfuscated jar, I found my mistake!
Anil

Missing registry entries for burning CDs

I used iTunes to burn soe playlists. This worked well. However, I also installed Nero Exprss after that. After this when I brought up iTunes it gave the message "MIssing registry entries - cannot import or burn CDs or DVDs - reinstall iTunes" Though I was still able to import CDs after that, I cannot burn CDs. The error does not go away even after re-installing iTunes several times (either usiing an Update or after unistalling and doing a fresh install).
How can I fix this problem ?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

"Missing signed entry in resource" for only some users

Hi,
I have recently updated my .jnlp file and .jar file and added some extra jar resources in the new jnlp.
Since this new version, some users receive an error saying
"Missing signed entry in resource:" for one particular resource.
While for other users it works fine.
I have signed the jar with jarsigner.
Does anyone have an idea what could be the problem here?
Thanks very much in advance,
Best regards,
Stein Aerts,
University of Leuven, Belgium

I remember hearing something like this, and had to do with :
1.) what version of jarsigner was used to sign the jar, and
2.) what version of JRE was used to validate the signed jar file on the client.
(including US only vs. International version of JRE)
For the jar that gets this error:
Does it have any empty directories in it., or does it have entries with non-english characters in the resource names ?
What version of the JDK was used to run jarsigner to sign this jar, and what jre is the application running on ?

Missing some entries in trasaction OKB9 after upgrade to ECC 6.0

We're missing some entries in transaction OKB9 after the upgrade to ECC 6.0. Pariculary, a significant number of records in table TKA3C were not copied over to ECC 6.0.
Have anyone experience this same problem as well. We're at the early stage of unit testing a we're worried that there maybe some other config tables that were not properly copied.
Any help would be appreciated.
Thanks,
Apollo

Hi friends, i fixed this issue.Its a configuration problem.In table T882 they didnt maintaine fisical variant filed for particular compony code.Once this is maintained the problem got solved

Missing signed entry in resource : urgent

Hi
While trying to acces my apllication on Tomcat 4.0 Servber I get this error
Missing signed entry in resource: http://localhost:8080/Graf/GZ.jar
exception is
JNLPException[category: Download Error : Exception: null : LaunchDesc: null ]
at com.sun.javaws.security.SigningInfo.checkSigning(Unknown Source)
at com.sun.javaws.cache.DownloadProtocol$RetrieveAction.actionDownload Unknown Source)
at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
My jnlp file looks like
<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="http://localhost:8080/Graf/" href="GrafZeppelin.jnlp">
<information>
<title>Graf Zeppelin</title>
<vendor>P&G</vendor>
<homepage href="GrafZeppeling.html"/>
<description>Graf Zeppelin</description>
<description kind="short">Grap Zeppelin Application to display Graf Zeppelin</description>
<description kind="one-line">Graf Zeppelin System</description>
<description kind="tooltip">P&G</description>
<icon href="images/gpblogo.jpg"/>
<offline-allowed/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.3+" initial-heap-size="24m" max-heap-size="256m" />
<jar href="y.jar"/>
<jar href="GZ.jar"/>
</resources>
<application-desc main-class="pathways.GZBase">
</application-desc>
</jnlp>
I have already done sigining of jar thru these commands
keytool -genkey -keystore myKeystore -alias myself
keytool -list -keystore myKeystore
jarsigner -keystore myKeystore test.jar myself
Can anypone tell me if something elase also needs to be done for this to make it work.I mean some other settings or something which I might be missing while deploying it.
Thanks
Sidh

I just got done spending some "quality time" (about 2 days worth) with jarsigner and Java Web Start to figure out a certificate problem, and I thought I'd share my findings to save others a bunch of time.
I have a JWS application that has two custom built jars and several third party jars. I'm looking to run it in "unrestricted" mode which means that all of the jars need to be signed. The building and signing went fine but I ran into the problems often mentioned in this forum of exceptions being thrown from the bowels of JWS while it was trying to launch my application.
I ran into a few different problems at different times. One was getting this exception during launch:
JNLPException[category: Download Error : Exception: null : LaunchDesc: null ]
     at com.sun.javaws.security.SigningInfo.checkSigning(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol$RetrieveAction.actionDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
     at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
     at com.sun.javaws.Launcher.downloadResources(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:536)
Another was an exception that included the message "Missing signed entry in resource".
The source of all of these problems was an incorrectly created/signed jar file. My problems occured with jakarta-ojb-0.9.7.jar (Jakarta's OJB package), but I believe that it can happen with any jar file.
First let me review what I found out about how the jar building and signing is done. When you sign a jar file with jarsigner, it creates signature files which it puts in the META-INF directory of the jar file. For example if you sign a jar file with the alias "foo", it will add files FOO.SF and FOO.DSA to the META-INF directory (your extensions may be slightly different depending on what kind of keys you have).
jarsigner also creates a new manifest file META-INF/MANIFEST.MF. For my jar file, before I signed it the MANIFEST.MF contained only this:
Manifest-Version: 1.0
Created-By: Apache Ant 1.5
Name: ojb
Class-Path:
After I signed it, the file had 675 entries in it like this:
Manifest-Version: 1.0
Created-By: Apache Ant 1.5
Name: org/apache/ojb/broker/metadata/RepositoryTags.class
SHA1-Digest: bX/beup+4fwyuMQIF9sz55wz3Zk=
Name: org/apache/ojb/odmg/states/ModificationState.class
SHA1-Digest: xl0iS4ojhVh8pHwzabKK9T2ouLg=
Name: org/apache/ojb/jdo/JDOTransaction.class
SHA1-Digest: Z/EV2WgDPVbHkY3D78mOIjLyLI0=
Name: org/apache/ojb/broker/util/pooling/WrappedConnection.class
SHA1-Digest: B3r6HwsWePdNkMYh8jIeBmfjrUc=
Here is where the problems begin. Here is one known bug that I did not have but you should be aware of, which has to do with paths that have 133 or 134 characters:
http://developer.java.sun.com/developer/bugParade/bugs/4357504.html
Another problem is as follows. When JWS reads the manifest file from each jar file, it iterates through all of the manifest entries and for each one, verifies that there is an entry in the jar file for it. Here is the code decompiled from javaws version 1.2 to give you an idea:
Manifest manifest = jarfile.getManifest();
Set set = manifest.getEntries().entrySet();
for(Iterator iterator = set.iterator(); iterator.hasNext();)
java.util.Map.Entry entry = (java.util.Map.Entry)iterator.next();
String s1 = (String)entry.getKey();
if(jarfile.getEntry(s1) == null)
throw new JARSigningException(url, s, 4);
The problem is that the manifest can sometimes contain entries that are intended as headers like this:
Name: ojb
Class-Path:
This fragment was created by the application that created the original jar file (ant), and was included in the new manifest file created by jarsigner. Inexplicably, this fragment was about one third the way down the 2228 line file, rather than at the top where you would expect it.
When JWS iterates through the manifest entries, it finds this one named "ojb", and then it tries to find an entry in the jar file with this key, and fails, which throws the JARSigningException, which causes the application launch to fail. Unfortunately JWS doesn't give you any of this detail in the error message, I had to discover this through a lot of sleuthing (and so will yoU!).
JWS just uses the java.util.jar classes to read the jar and manifest files, so it is simple to write a small utility that reads jar and manifest files and reports on them to help you identify problems like this. Note that using the -verify flag to jarsigner doesn't find many problems. Below is a utility I wrote called GrokJar:
import java.io.*;
import java.util.*;
import java.util.jar.*;
public class GrokJar {
public static void main(String s[]) {
String action = s[0];
if(!action.equals("-j") && !action.equals("-m")) {
System.err.println("Usage: GrokJar [-j | -m] file");
System.err.println("\t-j grok a jar file");
System.err.println("\t-m grok a manifest file");
System.exit(0);
String pathname = s[1];
if(action.equals("-j")) {
try {
File jarFile = new File(pathname);
JarFile jar = new JarFile(jarFile);
Manifest manifest = jar.getManifest();
Set set = manifest.getEntries().entrySet();
System.out.println("Manifest has " + set.size() + " items");
for(Iterator iterator = set.iterator(); iterator.hasNext();) {
java.util.Map.Entry entry = (java.util.Map.Entry)iterator.next();
String key = (String)entry.getKey();
if(jar.getEntry(key) == null) {
System.out.println("Can't get entry from jar for key \""+key+"\"");
} catch(Throwable t) {
t.printStackTrace();
else if(action.equals("-m")) {
try {
Manifest manifest = new Manifest(new FileInputStream(pathname));
Set set = manifest.getEntries().entrySet();
System.out.println("Manifest has " + set.size() + " items");
} catch(Throwable t) {
t.printStackTrace();
This utility reported the following for my jar:
Manifest has 675 items
Can't get entry from jar for key "ojb"
The solution to my problem was as follows:
1) First, make a copy of the unmolested jar file before you mess around with it (by default jarsigner modifies a jar file in place)
2) Sign the jar file with jarsigner
3) Run the GrokJar utility to discover any errant keys
4) If there are errant keys, un-jar the jar file into a temporary directory
5) Edit the file META-INF/MANIFEST.MF to remove the errant keys
6) Create a new jar file. Note that simply "jar cf" won't work. By default, the jar utility creates a new manifest file, which will overwrite the one you just edited. you need to either include the "m" parameter and specify your manifest file, or the "M" file so it won't create its own manifest file and it will use the one you edited.
7) Sign the jar file again with jarsigner. The reason is that jarsigner creates a signature for every entry in the manifest. If you sign it and then edit the manifest, the signature and manifest won't match. So you need to sign it again.
8) Run GrokJar against it again, and you should see a different number of manifest entrieS (not zero), and no errant keys.
That is what did it for me. Your mileage may vary. Here are some other links to good information that I found:
http://www.vamphq.com/download/jwsfaq.pdf
http://developer.java.sun.com/developer/bugParade/bugs/4625532.html
http://developer.java.sun.com/developer/bugParade/bugs/4357504.html
http://forum.java.sun.com/thread.jsp?thread=206075&forum=38&message=697559
Best of luck!
Randy

Missing calendar entries when syncing

Using windows xp, ms outlook 2007 and iTunes 1.1.3, I am missing calendar entries on my computer after syncing. The calendar entries are shown on the iPhone, but many do not make it onto Outlook on my computer. The sync seems to push onto the iPhone one-way, without updating the computer. Anyone else have this issue? Any solutions?

Update to original post:
Phone is taking roughly 45 minutes to sync, which is awful.
Calendar items are not syncing with Outlook.
Contacts are multiplying with every sync, numbering into the thousands.
My sense is Apple is overwhelmed with these issues. I did the iTunes upgrade yesterday and no improvement.

Calender entries on iPhone

calender entries made on the iPhone do not sinc to the iCloud and to outlook. (vice versa is ok) any hints and tips on that

My problem is the same, did you manage to fix it?

Nokia 6303 classic - home screen calender entries

Just changed my 6300 for this. Like the phone but don't seem to be able to get calender entries for the day on my home screen. Also, I don't seem to get the notes associated with calender entries even when viewing in the calender app. Any suggestions?
thanks

Not sure but you may try this.. With the navigation key (joystick) highlight the Note on the homescreen and then select (press the navigation key).. Does it open now ? If so .. you may get the Edit option too...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Missing configuration entry for data - index relationship

IN ST04 -> configuration -> Data Class
all data classes are in yellow I'm trying to activate them and getting the following error
"Missing configuration entry for data - index relationship"
This is the result of a system copy
Thanks
Kkhaldoun

Hi All,
Just an update, I was able to get around my problems by patching the 2004s media from sp6 to sp8, uninstalling my scs, and database and re-installing from the patched media.

Lost all contacts and calender entries after updating to 4.1 on iphone 3G!

I updated to 4.1 this morning and now don't have any contacts or calender entries on my phone! They are all present and correct in Outlook 2003 on my PC but don't appear to by syncing???
I usually sync via the 'air' with Exchange but not any longer it would appear!!
Has anyone else experienced this problem and have a resolution?
Thanks
JP
Message was edited by: John Phillips9

Exactly the same thing happened to me:
http://discussions.apple.com/thread.jspa?threadID=2562058&tstart=0
I also lost all my messages, mail, app settings etc.

How do i remove calender entries from the home scr...

im new to nokia fones and have recently had a nokia n95. i would like to know if there was a way i could remove the 'no calender entries today' from the home screen cuz its driving me mad lol.
any help would be much appreciated.
thanx
niki x

its been a while since i have used a series60 phone but i'll try to help.
you need to go to
settings-general-stand by
& then disable/deactivate/switch off the today screen feature/option.
hope i could help.
Video Audio Integrated Operation

Missing calender entries

Similar Messages

Maybe you are looking for