Missing Certrificate in Mail - how to fix?

Help!  I can't send mail and get this message.  Can anyone tell me what's going on?

More information:
I have found the following two threads that deal with a similar problem. In my case it is a matter of how data is displayed (as unformatted and unpunctuated text instead of in a grid) rather than pictorial images. Here is a screen-shot:
And here is the link to the online version, showing how it should appear:
http://ymlp309.net/zkrQWi
I have found two threads dealing with a similar problem (but with pictorial images rather than with grid-formatted text):
https://discussions.apple.com/thread/1595922?tstart=0
https://discussions.apple.com/message/17664326#17664326
But I am nervous about trying the Terminal procedure. Should I?

Similar Messages

  • After a PC crash i managed to restore my iTines library only partially. My music is there, but my ratings ant playlists are missing. Please advise how to fix this.

    After a PC crash I managed to restore my iTunes Library only partially.
    My music is all there. But my ratings and playlists are missing.
    Please advise how I can fix this.
    On my IPod Classic a still have all the music and the playlists. Is it possible to use this? Synchronise from i-Pod to iTunes??

    Hi, I have a similar problem on my iMac with unusable internal drive: https://discussions.apple.com/thread/3031967
    Dirtylobster wrote:
     4. Install win7 in your brand new virtual environment but after first step in the installation where it will reboot after unpacking the files - TURN OFF YOUR VIRTUAL MACHINE. You got 10 seconds to do that.
    Failure to do so will mess up the install and you must start over.
    I'm not sure if I should take a chance... Could you please explain step 4 a bit more detailed? Do I have to click on "reboot" (where?) and then within 10 seconds turn off the virtual machine? HOW would I do that? THANKS!
    EDIT: Did you read the following too?
    http://forums.macrumors.com/showthread.php?p=10601274
    What do you think of this alternative...? Thanks again.
    Message was edited by: coxorange

  • Bad rules mangled my mail: how to fix?

    I set up rules badly for my Mail. I had several sets of rules where *any* of two rules had to be met and then the mail was put in one mailbox or another. It turns out that all my mail met a couple of the rules!
    So I started noticing a LOT of mail in these mailboxes.
    Then I deleted some of the rules and moved the contents of the mailboxes back into the Inbox. Then I re-wrote the rules correctly so that only if *all* conditions were met would the mail go into one box or another. But I still had a couple mal-formed rules with the *any* option selected.
    I decided to delete ALL my rules and to move all the mail from those boxes back into the Inbox.
    Somewhere in the middle of doing this I noticed that recently received mail was mis-displaying. An email would have a header from one person but the body of another email! YIKES! Then search started acting up.
    Also while I was doing this I was hearing Mail crunching along in the background.
    I had a lot of mail accidentally put into those wrong mailboxes. So in the end, after those several partial changes, I patiently waited for all 25k emails to transfer back into my Inbox. Then I quit Mail and restarted it. It now SEEMS like some of the mal-formed mail is GRADUALLY getting better.
    Is there some kind of re-indexing I should make Mail do to really fix things?
    I once tried Rebuild and got into BIG trouble. (A lesson there that I vaguely recall is that you have to let it finish without interruption. I had thought that it had stalled and force-quit Mail in the middle of Rebuild.)
    Or will Mail gradually re-index itself and self-recover from my mangle-ations?
    I see official info on how to re-index, but don't want to do anything until I get my bearings.
    Thanks!

    RE-INDEXING WORKED!
    Mailboxes intact, etc.
    Garbled emails are fixed.

  • Your Foxfire profile cannot be loaded. It may be missing or inaccessible. How to fix this please? Freshly downloaded Foxfire returns this message instead of opening. Thank you

    "Your Foxfire profile cannot be loaded. It may be missing or inaccessible"
    This is the third time I have downloaded Foxfire. Each time I get this message, I uninstall and start over.
    First two times it opened once, then gave this message.
    when I uninstalled and re-loaded today, it wouldn't even open once. What does it mean?

    Thanks for reply.. I did look at that page. the message I received is not listed there.
    Oh! and I tried to start Foxfire in the safe mode - got the same message.
    appreciate your expertise and time. Mary S

  • Bounced mail, how to fix iCloud "over quota", and I am far from it?

    We switched from MobileMe to iCloud.  Each of us have individual iCloud.  Any mail sent to my wife is bounced, reason?  Over quota!  I have checked iCloud storage and she has 3.9 Gb available.  Have tried every thing, even went to "Genius Bar" to no avail.  Have been trying to call Apple for help, two time waited 20 minutes and got disconnected.  Now my wife is using her G-mail with iCloud.  Can't use iCloud.  Any help will be welcome.  Unless you have a solution, please don't bother.
    Thanks.

    Polly,
    usually there are multiple models of MacBook Pro per model number, but in the case of your model number (A1502), there’s currently only one model for that model number: 13-inch Late 2013.
    To reset your MacBook Pro, you’ll need to boot into Recovery mode by holding down a Command key and the R key as you start it up. When the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk (most likely the top item of the list). On the right-hand side, select the Erase tab. For the Format dropdown, select “Mac OS Extended (Journaled)”. For the Name input box, “Macintosh HD” has traditionally been the default name — I don’t know if that’s still the case for the Late 2013 models. After that, press the Erase… button, and erase its entire internal disk. When it’s finished with the erasure, exit Disk Utility, and select Shut Down from the Apple menu. When you start it up again, OS X Internet Recovery will redownload Mavericks from Apple’s servers and reïnstall it on your internal disk. Once it has reïnstalled, run Software Update to get it up to date, and adjust the System Preferences to your taste.

  • I've lost the "Send" button in my reply window. When I double click on a Mail message, on order to reply, the "Send" button at the top of the window is missing. I can reply by closing and saving my reply, and re-openning from Drafts. How to fix?

    I've lost the "Send" button in my reply window. When I double click on a Mail message, on order to reply, the "Send" button at the top of the window is missing. I can reply by closing and saving my reply, and re-openning from Drafts. How to fix?

    Hi, try this...
    If nothing is showing in the Toolbar at top, click the little gray oval at top right.
    Right click or Control+click on the Toolbar, choose Customize Toolbar, drag the Send button to the Toolbar.

  • I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

    I get nothing but error messages, -
    "Your IMAP server wants to alert you to the following: 113 that mail is not available"  or  the same with:  364? 
    Now there are hundreds stacked up on my desktop.
    I cannot find the answer anywhere. You need to  give answers to how to fix these errors because when I  "search" "error code" or the number there is NOTHING. NOTHING!  Yet you give us these stupid error codes
    then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft.  How in the world can you give us ERROR codes without the explanation of what
    to do or how to fix it. You need to  add each  error code number in your "search" then explain what it is and how to fix it.  I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
    So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
    I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
    was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

    Hi,
    I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
    Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
    If you find any unusual emails that cannot be read or sent, try deleting them to try again.
    I also suggest you create a new profile to setup the IMAP account:
    http://support.microsoft.com/kb/829918/en-us
    Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
    For the steps to setup an account in Outlook 2010, please refer to:
    http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
    I hope this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix

    I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
    Why after 6 year's this has changed?
    I would like to open PDF's straight from Window Mail.

    Good day Jeff.
    I am running most current Adobe Reader X.
    Tks Mark

  • Trying to start itunes - message appears "APSDAEMON.EXE MSVCR80.DLL is missing.  Then another box indicates "Error 7 (Windows error 126).  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing".  Then another box indicates "Error 7 (Windows error 126)".  Itunes will not start.  Can someone tell me what the problem is and how to fix?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • I have an older version of itunes stuck on my computer and because of an apparent pathway missing it wont let me uninstall and reinstall the newer itunes....anyone know how to fix this issue?

    I have an older version of itunes stuck on my computer and because of an apparent pathway missing it wont let me uninstall and reinstall the newer itunes....anyone know how to fix this issue?

    What's the precise text of that message please, jeremy? (There's a few different ones I can think of that you might be getting.)

  • Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    #1
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    #1.1 n/a because the errror message overrides it
    #2 see #1
    #3 iOS: Device not recognized in iTunes for Mac OS X
    But could be caused by #1
    #4 Covered by previous ones
    #5 Obvious jpegs are photos and thus will not sync as videos. Also see:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    #6 iOS: If you can't back up or restore from a backup in iTunes
    First #7 See #6
    Second #7 You have so many other problems resolve those first
    #8 Resolve other problems first

  • Just started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing.  I tried to reinstall itunes, but got another error message.  Anyone having this problem or know how to fix it?

    Just last 2 days started getting an APS Daemon.exe-System Error saying my MSVCR80.dll file is missing when booting up my PC with Windows 7.  I tried to reinstall itunes, but got another error message.  Anyone having this problem or know how to fix it?
    I now see the message from tt2 and will try that.  Thanks!

    Read this:
    MSVCR80.dll missing, cannot install iTunes

  • Mail unexpectedly quits since install of Mavericks. How to fix?

    How to fix Mail?
    Crashes frequently since install of Mavericks.
    Can Mail be 'reinstalled'?

    You can either reinstall Mavericks over your current installation, or try Pacifist, which is an app that should be able to extract just the Mail.app installer from the Mavericks installer. CharlesSoft — software you always wished someone would write

  • Just updated to  os x 10.9.2 on 3/5/2014 and i cannot send mail  does anyone know how to fix this

    i just updated to osx 10.9.2 on 3/5/2014 and i cannot send mail
    does anyone know how to fix this   (the smpt shows as off line - the certificate shows as none)

    i figured out a solution if anyone is having the same problem
    go to preferences in mail
    pick the mail account that is not sending
    if your outgoing mail server states it offline as mine did
    click the dropdown  and than click edit smtp 
    a window will come up that says account information and advanced
    click advanced
    renter your password and ok
    restart your computer - when it restarts it will send emails 

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

Maybe you are looking for