Missing Clients in XASN Admin -RETURNED!

When I open XSAN Admin (from any client) none of the client computers are visible. The volumes which are already mounted on the clients work normally, but as they are not appearing in XSAN Admin I cannot mount or un-mount additional volumes.
We've seen this for a long time, randomly & intermittently, and worked around it by running:
*sudo killall servermgrd*
on the client and doing a refresh. That no longer works, and I'm stumped!
I find that by using:
*sudo mkdir /Volumes/volumename*
*sudo mount_acfs volumename /Volumes/volumename*
on the client I can mount any missing volumes, but it's much less convenient than using the right tool!
The only thing that's changed recently is we've gone from 10.5.3. to 10.5.4 -but that might be a red herring. We're on XSAN 1.4.2.
Has anyone any clues?

Thanks Donald & wilsonbyu.
Unfortunately it would seem that manipulating files in these locations won't bring back my missing clients!
Interestingly our four servers (which are also clients) are visible in XSAN admin. Every other client is absent.
I can confirm it's not the 2008-05 security update at work -we've not put that on yet.
Does the following system log excerpt shed any light:
*Sep 2 07:53:55 clientmac01 fsmpm[151]: NSS: Name Server '10.160.21.48' (10.160.21.48) heartbeat lost, unable to send message.*
*Sep 2 07:54:25 clientmac01 fsmpm[151]: NSS: Name Server '10.160.21.49' (10.160.21.49) heartbeat lost, unable to send message.*
the .48 & .49 addresses are the private network addresses of the MDCs.

Similar Messages

  • Missing features in Server Admin

    I have been administrating OS X servers for a couple of years, in my opinion there are a couple of things missing from the Server Admin Application:
    *Fetchmail setup*
    It's very easy setting it up using the command line (once you know how to do it). So why not make a GUI option for it? It's an excellent feature when a server is installed on a location where the power and/or internet connection is not reliable enough. In fact one of the (very) few things I like on a Windows server is the POP3 Connection Manager, it's very easy to set up.
    *Site 2 Site VPN*
    An excellent feature, once again, simple to set up once you know how to do it using the command line. It's an excellent option for connection networks. But it feels like a hidden feature.
    *Windows version*
    The Server Admin and Workgroup manager apps are great, but I think that a Windows version would make a Mac OS X Server more attractive for Windows user. Both apps are relatively simple, so why not?
    That's all...

    Click here and fill out the form to send feature requests to the Mac OS X Server engineers.
    (24959)

  • J2me Mobile client calling method which return byte[] java.rmi.MarshalExcep

    J2me Mobile client calling method which return byte[]
    java.rmi.MarshalException: Expected Byte, received: SGVsbG8gV29ybGQ=
    WebService1_Stub ws=new WebService1_Stub();
    try {
    String s=ws.getStringHelloWorld();// works fine
    byte s[]=ws.helloWorld(); // error java.rmi.MarshalException: Expected Byte, received: SGVsbG8gV29ybGQ=
    }catch(Expception e){
    ex.printStackTrace();
    }This same ws working fine in java standalone application please guide me what can be a problem ??
    Regards
    Haroon Idrees

    clear your app. server logs ( or make copies of them if will you need them) and redo the whole process. check out the logs and you should see some reason for this. i do not know if Borland's logs will turn out helpful, but it did help me out in certain other situations.

  • Bpel 10.1.3.5 miss russian i18n for admin

    I upgraded bpel from 10.1.3.4 to 10.1.3.5
    Now bpel admin (console) produce error in Apache:
    "GET /BPELAdmin/lib/i18n/.js?gvpn0m HTTP/1.1" 404 134
    I find that russian i18n js file miss in
    orabpel/console/lib/i18n:
    de.js es_ES.js fr_CA.js it.js ko.js readme.txt zh_TW.js
    en.js es.js fr.js ja.js pt_BR.js zh_CN.js
    Any suggestion?

    I have the same problem. My language is dutch, no nl.js either.
    The result of this missing file is that in BPELConsole in the instances-tab Flow, Audit and Source do not work.
    There is no default locale!
    So a workaround is change your language in your browser or make a little change in jsResourceBundle.jspf.
    This file can be found in j2ee\home\applications\orabpel\admin and j2ee\home\applications\orabpel\console.
    In this file the locale is read:
       String key = matchLocale(request.getLocale()).toString();In case of an unsupported locale matchLocale returns an empty String (which is wrong).
    Add this line:
      if ("".equals(key)) {key="en";}And the default is set to english again.
    By the way, did you log a SR?
    Groeten,
    HJH

  • I can't upgrade clients from ARD admin

    Hi all,
    I am trying to upgrade all my client machines to ARD 3.3.2. But when I try doing this from ARD admin, it comes back failing with no error message returned. What could be causing this?
    Thanks in advance...

    Have you tried restarting the workstations and then trying the update? That's often cured the problem for me when an update fails.
    Hope this helps.

  • Images change position and dimension after client edits on admin console!

    Hi, 
    1. After my client uploaded his images onto the site using the admin console they changed position slightly and did not fit exactually into the image frames i had set when i first made the site.
    2. When i opened the site on muse and merged changes the images positions and dimensions changed even more than what was being diplayed on the live site? (E.g I originally had two columns of square thumbnails for some slideshows and now i have a single column of rectangle images)
    3. I republished to see what would happen it now displays the way it was diplaying in Muse. The site is: www.jacobbuckland.co.uk
    My understanding was that when i create an image frame or gallery in muse that any image uploaded via the admin console should fill that frame no matter what the size or dimensions of that image?
    Any help gratfully received. Thanks

    Our technical team managed to find the immediate cause for the problem, and a solution.
    According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
    Where <APPLICATION> is the name of the problematic cube.
    After that everything is working.

  • 2003 to 2008 R2 file cluster migration - shares fail to migrate due to missing client access point

    Hello,
    I need to migrate my 2003 cluster to 2008 R2, but am having difficulty doing so. I have a 2003 2 node disk and node majority cluster which has 3 groups (2 individual file shares) and a separate group for the quorum.
    I'm trying to migrate my 2003 groups to a 2 node 2008 r2 cluster.
    I've ran through the cluster migration wizard as
    http://technet.microsoft.com/en-us/library/ff182337(v=ws.10).aspx), the disk resources within my group migrate, but the file shares don't.
    In summary:
    - I ran the 2008 r2 cluster run migration wizard and connected to my 2003 cluster
    - Once the wizard completes, I left the the newly migrated group on the 2008 r2 cluster offline
    - Took the appropriate file share and disk resource group offline on 2003
    - Ensured the iSCSI disks for my migrated data are showing correctly on the 2008 R2 node (I'm using the same drive letter which my 2003 node used for the moved disk)
    - I then brough the resources online. Resources fail to come online as client access point is missing, so I add a new access point (http://blogs.technet.com/b/askcore/archive/2010/08/24/using-multiple-client-access-points-cap-in-a-windows-server-2008-r2-failover-cluster.aspx)
    - Restart my 2008 r2 cluster node
    - File share is missing! The file share has not been imported
    I then tried the registry key export and import:
    - On my 2003 active cluster node I export HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Shares
    - I take the appropriate cluster resource and disk offline on my 2003 node
    - Attach the disk to my 2008 R2 cluster node
    - Added the new disk as a cluster resource (again keeping the same drive letter)
    - Merged the 2003 registry key with the share information (note examining regedit shows the newly imported key)
    - Restart the server, but the share doesn't show up in the cluster administrator or share management tool on my 2008 R2
    1. Is it even possible to transfer file shares using the cluster migration wizard from 2003 to 2008 r2? Maybe I'm missing a step with the client access point (or do I need to transfer all cluster resources over at once).
    2. Should the registry key export import work, when the shares have been created under the cluster administration console (as opposed to windows explorer)?
    Thanks

    Hi,
    Currently there is no such a tool which could help transfer Sharing permissions to a new server or a new cluster.
    Here is an article about file share in a cluster:
    Working with File Shares in Windows Server 2008 (R2) Failover Clusters
    http://blogs.technet.com/b/askcore/archive/2010/08/19/working-with-file-shares-in-windows-server-2008-r2-failover-clusters.aspx
    From this article, share permission of a Windows Server 2008 R2 failover Cluster will be stored in HKLM\Cluster\Resources\<GUID>\Parameters.
    You can test to export that keys to new cluster to see if shares will occur however as it is GUID involved, it may not work on a new cluster. 
    If you have any feedback on our support, please send to [email protected]

  • Client Actions Tab Missing Client Actions

    Hello All,
    I just deployed the new SCCM client (Version: 5.00.7958.1000) to a test group in our environment. SCCM successfully uninstalled the SCCM 2007 and installed the SCCM 2012 r2 client. The problem is when I go under the Actions tab there are several components
    missing. In my screen shot below the client from my lab on the left has all of the cycles and the one on the right is only has two.
    I believe this happen in the lab I cant recall how it was resolved but based on this entry from the ccmsetup.log it has to do with the MP. (slapping myself on the hand for not documenting this)I also notice that ccmsetup.log is referencin
    Any assistance would be appreciated
    version 4.0
    Phil Balderos

    Hi,
    How did you deploy the client? As you are in an environment with both a SCCM 2007 and an SCCM 2012 environment, automatic site discovery will discover the SCCM 2007 site as the boundaries are configured that way.
    What if you try to deploy the client using the CCMSETUP.exe SMSSITECODE=xxx then it should find the MP from AD for your new SCCM 2012 site and you should be fine.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec
    Thanks Jorgen!
    I am deploying to a test collection (3 computers) in sccm 2012 r2 using client push.
    The SMSSITECODE=XXX is in the correct location:
     Sites>Properties>Client Push Installation Properties>Installation Properties Tab
    Also spotted this in ccmsetup.log
    No valid source or MP locations could be indentified to download content from.Ccmsetup.exe cannot continue.
    and in client.msi.log
    MSI (s) (98:B4) [11:51:28:242]: Windows Installer installed the product. Product Name: Configuration Manager Client. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
    This is strange.
    Phil Balderos

  • Install SCCM client remotely with admin rights

    Hi,
    I want to deploy SCCM 2012 R2 clients remotely via PowerShell script running on an admin computer with the following commands :
    $Computers = Get-Content C:\Computers.txt
    $Computers | % { Copy-Item -Path C:\Temp\ccmsetup.exe -Destination \\$_\C$\RemoteTemp\ }
    Invoke-Command -ComputerName $Computers -ScriptBlock {\\$_\C$\RemoteTemp\ccmsetup.exe /mp:MP01}
    When I run the PS script, the client is not installed on remote computers. When I run the ccmsetup via command line locally, there is a popup displaying if I want to allow the EXE execution. When I click on YES, the client is well installed. So I want to
    know if there is a solution to do it from my PS script with admin right bypassing UAC on remote computers ?
    Thanks.

    If that's really the road you want to take then this will probably help:
    http://jeffwouters.nl/index.php/2011/11/having-some-fun-with-uac-and-powershell/
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Can clients act as Admin's to other clients in a limited capacity?

    Here's my dilemma.
    I'm creating an After Effects render farm of 12 computers. 5 of them are active workstations. When a user from any of the workstations send a file to the render farm they will need to manually activate fonts on each of the 12 systems. Is it possible for a client to interact with another client in a limited capacity? Can any computer control any computer?
    OR, can I install multiple instances of the Admin application and obviously only run one copy at a time?
    Any thoughts? You're advice is greatly appreciate.
    Brett
    G5   Mac OS X (10.4.3)  

    " Is it possible for a client to interact with another client in a limited capacity?"
    No.
    "Can any computer control any computer?"
    No

  • Client logging of admin access

    Is there any way for a client to check if an ARD admin has connected?
    It seems not at the applcation layer, but there must be something, somewhere that can be activated on the client?
    b.

    i've never seen anything from ARD in system.log.
    have you seen it yourself?
    b.
    I think what hes talking about is ARD version 3's ability for the admin to create logs based on clients activity on systems.
    Im also looking for a way to see when a admin has connected to a system, in this particular case a tech administrator logged into an end system and deleted files after he was let go, we only have access to the end system and are looking for logs to prove what user connected and the times..
    I have been unable to find anything conclusive.
    anyone???
    Thanks

  • Since Firefox 12.0 I am missing tabs in Joomla admin interface

    I am using Joomla Admin Interface to upload products to my site, but since recently (I assume its since my last firefox update from 11.0 to 12.0, I am missing some tabs on Joomla Add Product [http://i.imgur.com/HiVMJ.jpg see picture]
    In the blueish area surrounded by the black border, I used to have options in tabs in until previous Firefox version; Add image, Add Weight etc, at least 6 or 7 tabs.
    While it still Works in Internet Explorer
    I tried to clear the cache/cookies and update Java
    Using Win 7 Enterprise 64bit
    Thanks.

    Using a new profile may give different results from merely disabling a plugin. Sometimes even using a new profile is not sufficient with regards to plugins and they need to be totally installed.
    I have no particular reason to suspect it is the problem in your case but for instance security or even ad-block software can cause problems, and they are the sort of applications that sometimes may need uninstalling to prevent their operation.
    It would be interesting to hear what the Joomla site says.
    It would also be interesting to see if the problem does occur in only specific versions of Firefox (try in [[safe mode]] and maybe consider trials with Nightly).

  • Missing client classes

    Did anyone try to download the client.jar and invoke the service from a different
    address. (http://localhost:7001/msg/examples.soap.msgService.MsgSend/index.html)
    I tried to compile a ComsumerClient class for webservices/message example and
    I get the following error
    Class weblogic.soap.codec.LiteralCodec not found in import.
    It seems that this class was not included in the client.jar file.
    Are there any classes we have to include in the CLASSPATH?
    Thanks!
    Cristi

    client.jar only contains classes needed for basic soap encoding.
    If you want to use literal encoding from the light client, you
    need to add LiteralCodec + org.w3c.dom.* classes. The consumer
    client example does not need literal encoding, because it is
    sending string. the modified version of ConsumerClient is attached.
    regards,
    -manoj
    package examples.webservices.message;
    import java.util.Properties;
    import java.net.URL;
    import javax.naming.Context;
    import javax.naming.InitialContext;
    import weblogic.soap.WebServiceProxy;
    import weblogic.soap.SoapMethod;
    import weblogic.soap.SoapType;
    import weblogic.soap.codec.CodecFactory;
    import weblogic.soap.codec.SoapEncodingCodec;
    /*import weblogic.soap.codec.LiteralCodec;*/
    public class ConsumerClient{
    public static void main( String[] arg ) throws Exception{
    CodecFactory factory = CodecFactory.newInstance();
    factory.register( new SoapEncodingCodec() );
    /*factory.register( new LiteralCodec() );*/
    WebServiceProxy proxy = WebServiceProxy.createService(
    new URL( "http://localhost:7001/msgreceive/receiveMsg" ) );
    proxy.setCodecFactory( factory );
    proxy.setVerbose( true );
    SoapType ret = new SoapType( "result", String.class );
    proxy.addMethod( "receive", ret, null );
    SoapMethod method = proxy.getMethod( "receive" );
    while( true ){
    Object result = method.invoke( null );
    System.out.println( result );
    Cristi Mariean wrote:
    >
    Did anyone try to download the client.jar and invoke the service from a different
    address. (http://localhost:7001/msg/examples.soap.msgService.MsgSend/index.html)
    I tried to compile a ComsumerClient class for webservices/message example and
    I get the following error
    Class weblogic.soap.codec.LiteralCodec not found in import.
    It seems that this class was not included in the client.jar file.
    Are there any classes we have to include in the CLASSPATH?
    Thanks!
    Cristi

  • Oracle.DataAccess.Client.OpsSql::ExecuteReader() never returns

    Within a single day I have experienced twice a peculiar problem with Oracle.DataAccess.Client.OpsSql::ExecuteReader()
    Calling ExecuteReader() blocks indefinitely on a simple select query (it was a different query the two times). The CPU of the Oracle Server was low, so it is not likely that it has been too busy (and moreover at least 10 minutes passed, and it was still blocked)
    Strangely in v$session there was no session entry for the particular process+thread that made the call. There was an inactive session from the same process, but different thread
    My guess is that somehow the Oracle executed the query, but the Oracle Client was not notified and remained waiting. The issue happened on a virtual machine with not stable network connection. Could it be that some packets were lost and the Oracle Client just kept waiting?
    Can anybody recommend a course of action?
    Btw, I use ODP.NET 2.111.6.20

    I use VPN all day every day, and havent seen that problem.
    A client sqlnet trace may help as well, and I'm guessing will show the client is waiting on a packet from the db.
    You may want to take a hang dump using ADPlus, and my guess is you'll see a socket stuck in WSA_Recv32 (waiting for a packet that never comes).
    The default time to wait for a packet is like 2 hours if I remember right.
    You may want to see if your network guys can have a look, or use a tool like WireShark to monitor packets.
    Hope it helps, sorry I dont have a quick easy answer for you.
    Greg

  • Missing Functionality: Trackingnumber in Goods return

    Version: (Please provide the current version)
    SAP Business One 2005A - SP01 - PL41
    Description of requirements: (Please provide a detailed description)
    We need the field &amp;quot;tracking number&amp;quot; in return deliveries to
    suppliers. This
    field is provided under &amp;quot;logistics&amp;quot; for normal deliveries but does
    not exist
    for return deliveries.
    Business needs: (Please describe the impact on your business, if the
    functionality is not realized)
    We need to print the tracking number on our delivery notes. For return
    deliveries we now have to add it manually.
    Examples: (Please describe a typical example, how the functionality
    should work.)
    The field &amp;quot;tracking number&amp;quot; should be made available under
    &amp;quot;logistics&amp;quot; also
    for return deliveries so that the tracking number can be printed
    automatically on the delivery note.
    Current Workaround: (Please describe the workarounds you are using at
    the moment)
    Add the tracking number manually.
    Proposed solution: (Please suggest how the new functionality should
    work)
    See Examples.

    I assume this doesn't happen in the non-overriden view objects. Can you provide more information on what functionality you have overriden since getEstimatedRowCount() doesn't seem to work in your version of the view object?

Maybe you are looking for