Missing clips when using log & transfer

Hi everyone,
I use a canon vixia hf m41, when I use log & transfer it works fine except some clips are missing! There are less clips in the log and transfer window then there are in the stream folder..........

I tried this again last night with a slightly different result. This time, all .m4v files were copied as .mov files to the Event folder, but no clips were created in iMovie. I then tried dragging the .mov files from the Event folder to the Event in iMovie, but I received the following error:
"The files will not be imported. They are not compatible with iMovie."
So, the .mov files that iMovie itself created are not compatible with iMovie.
I also verified that there are no non-Apple codecs in the Library\Quicktime folder per this thread:
https://discussions.apple.com/message/9755974#9755974
Any help would be greatly appreciated!

Similar Messages

"clips queued-idle" error using log&transfer in FCP7

Hi, I shoot HDV on a Sony Z5 and now want to use a Sony memory recording unit (HVR-MRC1) instead of tapes.
Today I ran some tests and the first time all went well: I connected the HVR-MRC1 with a firewire cable, opened log&transfer in FCP 7 and no problem importing all the files (after downloading a plugin).
But then I deleted all the files and recorded some new clips. Once I tried to import those in FCP, using log & transfer I could only import 7 of the 9 clips. Of the 2 clips it didn't want to import it said "clips queued - idle".
Also, I realised that none of the clips I shot could be previewed and I couldn'y choose an in- and outpoint before importing. I could only import the whole clip.
I would be extremely grateful if someone could help me with this. I'm looking forward to working tapeless, but I need to be 100% sure that I'll have access to all my footage.
Many thanks in advance!

First thing, I always copy the material to a local hard drive before doing the log and transfer. Make sure you copy the containing folder from the camera. If you change the folder structure, fcp will not be able to access the material.
What settings did you shoot with. FCP is not compatible with certain formats. If you have access to Premiere, you may be able to convert the files to an fcp friendly format.
Good luck.

Using Log&Transfer with QuickTime files?

Has anyone tried this? Is it possible? I have been given a drive with .mts files converted to quicktime. The file names are utterly meaningless. Example: I have 30 QT's with duplicate names in different folders, from different shooting days. Obviously I need to relog everything, give it scene/take info. Wondering if I can use Log & Transfer to log the QT files?
The footage was shot 1080p, should I just bring in the .mts files thru log&transfer, ProRes?
Suggestions and guidance very much appreciated.

Thank you for your reply -
The .mov files are Apple ProRes 422(HQ).
As mentioned earlier I also have the original .mts files. Everything was shot AVCHD 1080p.
Short of slogging through thousands of incorrectly labeled .mov files I was thinking of just starting fresh with Log & Capture of the original .mts files.
One of the reasons I'm thinking of working with the .mts files and Log & Capture is that I can rename the clips while retaining the metadata of the original .mts files. My understanding is that this will preserve the link between the 'work print' and the camera original 'negative' so to speak. It will also afford me the easy ability to work in ProRes proxy and uprez later, tho I assume I can bring in the 'mov as proxy and do the same thing?
I've been known to be totally wrong and thus, I am here seeking wisdom.

When you Log & Transfer 720p 25pN footage it shows as DVCPRO HD 720p50

Hi,
When I Log & Transfer 720p 25pN (native format) footage it shows in the Browser as DVCPRO HD 720p50 (though with 25fps). Why is that? Is that a mistake?

The COMPRESSOR is 720p50. The FRAME RATE is 25... right? That is right. The FORMAT is 720p50...because it is based on a tape format. But the frame rate...the rate it is playing, is 25fps.
Things are fine. Nothing to worry about. If it said the RATE was 50, then it'd be 50fps...but it is 25fps.
Shane

Cannot capture using log & transfer because warning message

Hi,
I recently switched cameras - from using a Canon Mini DV ZR 900 to a Panasonic SDR-H85. Of course when I plug in the new camera to the computer via USB, FCE4 doesn't recognize it because it's AVCHD. The media (video clips & stills) is transferred anyway via Adobe Bridge and stored in a designated folder on my hard drive. I then converted the video clips from .MOD to .MOV with MPEG Streamclip. The converted clips are saved in a different folder. I also did the easy set up changing the format to Apple Intermediate Codec and use to AVCHD 1440X1080i60. So then I start a new project and try to do log and transfer but when I try to add the folder containing the converted clips, I get a warning window that says that the folder contains unsupported media or has an invalid directory structure and to please choose a folder whose directory structure matches supported media. Can someone please tell me what is wrong or what I'm missing? I need to have a way to identify and organize these clips. Thanks!

Okay, as soon as I get my next check. Judging by your response and what I read on the Apple site, that will solve my problem? I sure hope so. One of the reasons I switched from recording to tape to hard drive is because an Apple Store techie assured me it would be much easier capturing using log and transfer rather than the long drawn out process I was using with tape (making subclips, etc.). So I was pretty upset to encounter this obstacle. I wasn't warned about the perils of AVCHD, and reading the process in your book it didn't seem like it should have been a problem anyway. So I'm still quite confused. But that's okay. I'll be happy enough just to have something working finally! Thanks

When composing new email (gmail) tool bar showing fonts, colors, bold, italics, underline, etc. is missing? When using Internet Explorer the bar is there.

When using Firefox, the tool bar above the "compose mail" window is missing. I cannot change fonts, use bold, italics, underline, change colors, align margins, etc. When using Internet Explorer the bar IS there but I prefer Firefox, as it is much faster. My operating system is Vista.

Thanks Tony T1, I have tried using the Mail -> Format drop downs...
... and using the format toolbar...
... and in both cases, Bold and Italic is greyed out... (bit hard to see in the second screenshot, but it is, honest!)
The mail message is def set as Rich Text, which you can see in the first screenshot, as the option to Make Plain Text is there...

When using "we transfer" to send great size documents, the mail is loading more times the same mail (from Digitalus)

It happen when I use "we transfer", but also when somebody else use it to send something big to me.
I load my mail from digitalus, it stands there for 1 or 2 weeks, because I want to download the same information on several computers. Every minute of 5 minutes Thunderbird download/transfer my mail from digitalus to thunderbird. But this happen more times when I or somebody else use "we transfer". Can you do something on the program, or can I change something, so this happens not.
Because now I have finished my mail, but after I get a mail from "we transfer", I can start all over again.
Thanks for the answer.
greetings

I had saved one copy as an .asp but then resaved it to .xhtml
I'm assuming this is a static web site. Rename (F2) all your pages with .html or .htm extension.
.xhtml is not a valid extension.
Nancy O.

Missed calls when using Safari

I've noticed that sometimes I miss calls when I'm using Safari. Has anyone else seen this?
Thanks,
Sam

Is there a reason that EDGE can't carry an alert signal while downloading?
Good Q. EDGE can do exactly that, if the network is set to Network Operation Mode One (NOM-1).
In that case, the paging signal is copied over the data download side of things. Then a phone that knows how, can notice it and alert the user to make a choice.
NOM-1 is rare in the U.S., though.

I have footage shot on a p2 camera, why won't all of the clips transfer when using Log and Transfer?

Only about 60% of the clips transferred over or was shown in the Log and Transfer window.

Offload the cards...back them up. That is priority #1. Do that first...then return the camera. Then try mucking about with this.
Back up the ENTIRE card structure.

Is there any way to activate the keep identity setting when using a Transfer SQL Server Object Task?

Is there any way to add the "Keep Identity" option to the tables selected for transfer in a Transfer SQL Server Object Task? It seems that would be very useful, yet I can't find an easily available setting for it. I would prefer to
accomplish this within the Transfer SQL Server Object Task since it can copy any new fields added to the source tables, as opposed to having to rebuild a custom Data Flow Task any time a table structure is altered. I thought setting "CopyPrimaryKeys"
to True would do the trick, but I found that only ensures that the column settings are transferred; when the transfer happens, the destination id column is populated based on the specified seed and increment value, not what's actually in the source table.
I'd like to point out that replication isn't really an option here. This is a package that runs a few times a day to keep some data on our website up to date with data in our protected corporate environment.

IIRW there is FastLoadKeepIdentity specifies
whether to keep an identity in OLEDB destination
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Missing Parameters when using .PrintToPrinter or .ExportToDisk

I am creating a viewer that will set login information and allow the users to view, print or export reports. VB.NET 2010 WinForms Crystal Engine 13.0.9.1312. All reports are external designed by various programmers.
The preview mode of my viewer is now working quite well (with the help of Don and Ludek most recently). Anything I want to see on screen works great in the regular Crystal viewer.
The problem is when I want to export to pdf or print to a printer without viewing on screen in the regular Crystal viewer.
If there are no parameters in the reports, both exporting to pdf and printing to any printer selected works.
When there is one or more parameters, it crashes and points to the line
crReport.ExportToDisk(ExportFormatType.PortableDocFormat, strFile)
or
crReport.PrintToPrinter(1, True, 0, 0)
with the message Missing Parameter Values.
Through some searching (and yes I have checked on this site and Google for "Missing Parameter Values") I have found one big issue is that parameter values have to be set after the .ReportSource is set. So before I changed my code, I never saw the Crystal Parameter prompt screen. Now I see it but still get the crash (though once I have had it go to printer honouring the Parameter in a report, but I can't always reproduce it and never when sending to pdf).
The reports may be designed by end users who are using my program. I will not know what reports they are or if they have even put in parameters. I will not know if they are date, string, number, discrete, range, multiple, etc.
The original login code referred to below can be found here.
         'original login code here down to subreport login
         'rest of subroutine is just a Catch and End Try
         crViewer.ReportSource = Nothing
         crViewer.ReportSource = crReport
         'check if to be sent direct to printer and send all pages
         If Not autoforms Is Nothing AndAlso autoforms.ToPrinter Then
            crReport.PrintOptions.PrinterName = autoforms.Printer
            crReport.PrintToPrinter(1, True, 0, 0)   '-> Error Triggers Here
         End If
         'setup viewer options
         Dim intExportFormatFlags As Integer
         intExportFormatFlags = ViewerExportFormats.PdfFormat Or
                                 ViewerExportFormats.ExcelFormat Or
                                 ViewerExportFormats.ExcelRecordFormat Or
                                 ViewerExportFormats.XLSXFormat Or
                                 ViewerExportFormats.CsvFormat
         crViewer.AllowedExportFormats = intExportFormatFlags
         crViewer.ShowLogo = False
         crViewer.ToolPanelView = ToolPanelViewType.GroupTree
         'check if to be sent direct to pdf and send all pages
         If Not autoforms Is Nothing AndAlso autoforms.ToPDF Then
            Dim strPDFFilename As String = autoforms.PDFPath & "\" & autoforms.ReportName & "_" & autoforms.ReportType & ".pdf"
            'strPDFFilename = Replace(strPDFFilename, " ", "_")
            SendExport(strPDFFilename, "PDF")
         End If
         'if not preview then close form
         If Not autoforms Is Nothing AndAlso Not autoforms.Preview Then
            Me.Close()
            Exit Sub
         End If
Private Sub SendExport(ByVal strFile As String, ByVal strExportFormat As String)
      'pass current parameter values to the pdf
      Dim crParamFieldDefs As ParameterFieldDefinitions
      Dim crParamFieldDef As ParameterFieldDefinition
      Dim crParamValues As New ParameterValues
      Dim x As Integer = crViewer.ParameterFieldInfo.Count
      crParamFieldDefs = crReport.DataDefinition.ParameterFields
      'loop through each parameter and assign it the current values
      For Each crParamFieldDef In crParamFieldDefs
         crParamValues = crParamFieldDef.CurrentValues
         crParamFieldDef.ApplyCurrentValues(crParamValues)
      Next
      Select Case strExportFormat
         Case Is = "PDF"
            crReport.ExportToDisk(ExportFormatType.PortableDocFormat, strFile) '--> Error Triggers Here
         Case Is = "xls"
            crReport.ExportToDisk(ExportFormatType.Excel, strFile)
         Case Is = "xlsx"
            crReport.ExportToDisk(ExportFormatType.ExcelWorkbook, strFile)
      End Select
End Sub
This code doesn't work on my system, but my logic is as follows (as flawed as it is). Look through the parameters, find the current values and then assign them to the parameters again just before export.
With the code above, I am getting the enter parameter values screen in the viewer. Therefore, my assumption is that the report now has a current value(s) for the parameter(s). The loop will not require the program to know how may parameters there are or what the values or value types are.
There are a couple of problems with this. When I step through it, there are no current values, because the prompt doesn't come up with stepping through the code with F8. Second problem is that it is finding the internal parameters used for subreport linking ({?PM-xxxxx}). Third problem is that a lot of code I have looked at does not appear like it is assigning the reportsource to a viewer at all just to export or print to printer. So is it necessary to do as I have done here?
I am sorry this is so long and I appreciate anyone who has stuck to it this long. I am at my wits end trying to figure out how to make this work. I think there is a timing issue here but do not know how to resolve it. I just want the report to trigger the prompts if there are parameters, then send the report screen, to pdf or to printer depending on the user's settings for the report (it may be any or all three options). If you need more info, let me know.
TIA, rasinc

Hi
I'd like to look at this from the "how parameters" work point of view. Then let's see if we can drill in on some of the details.
The parameter prompt screen is driven by the viewer. E,g.; the screen will only be spawned on invocation of the viewer. If the viewer is not invoked (e.g.; direct print / export) the parameter prompt screen will not be displayed. Now, in your second post you say:
With the code above, I am getting the enter parameter values screen in the viewer.
This does not sound correct based on the above. E.g.; if the correct parameters are passed to the engine, the viewer should never be popping up the parameter screen. So to me it looks like the code for the parameter is not actually working. It looks like it is as there is no error as such. But as you get prompted, the engine is essentially saying; "I don't understand those parameters so as smart as I am, I'll use the parameter prompt screen to get them from the user on a silver platter".
Ok. Now to some troubleshooting. I'd pick a report where I know the parameter type and acceptable values ahead of time. Don't use date or date / time params to start with as these have other complication. Use the parameter code to set the value(s) - preferably one value (I like to keep things simple). If the parameter is passed to the report engine correctly, there will not be a parameter prompt and the report will simply come up in the viewer. Once this works, add in a code for printing / exporting and comment out the viewer code. The report should print / export without any issues (no parameter prompt, no error). Repeat the above with a multi-parameter report.
Then it will come to those date and date/time parameters. NULL handling, etc., etc. E.g.; this will not be trivial. And you will somehow need to know the parameter type (string / int / date) before you try to pass it into the report. More help:
Sample apps
vbnet_win_paramengine.zip
vbnet_win_paramviewer.zip
vbnet_win_multirangeparam.zip
vbnet_win_rangeparameters.zip
vbnet_win_sub_daterange_param_engine.zip
vbnet_win_sub_daterange_param_viewer.zip
The above samples are here: Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki
Helpful KBAs
1688710 - When printing a Crystal report with parameters using 'PrintToPrinter' method, report does not prompt for parameter values
1214110 - How to pass a Date/Time parameter to a report at runtime using VB .NET
1496220 - Suppress the default parameter prompt when the parameter value is not passed through the code
1893554 - How to pass a NULL value to a Crystal Reports optional parameter field using Visual Studio .NET
1425379 - How to avoid being prompted for a parameter when refreshing a report running in a VS .NET application
1461315 - Error; "Missing Parameter Values" when running a parameterized report using Crystal Reports SDK for VS .NET
1215426 - Err Msg: "Missing parameter value" when printing or exporting in VS .NET
And finally this:
Crystal Reports for Visual Studio 2005 Walkthroughs
(The above doc is good for all versions of CR and VS. It has some amazingly great "stuff" in it re. parameters, etc., and more.)
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

ORA-00936: Missing Expression when using a claculation as a condition item

Hi
I created a calculation below to create a subtotal on each row of a group of selected items.
SUM(Invoice Amount)OVER(PARTITION BY Supplier Num ORDER BY Payment Currency Code)
This worked fine - but then I wanted to create a condition based on this calculation and when I used the calculation as a condition item and reran the report I received the 'ORA-00936: Missing Expression' error. So not too sure why it is fine as a calculation but not as part of a condition.
We use Discoverer version 4.1
Am I missing something or is this a bug?
Any help would be very appreciated
Thanks
Marcus

Thanks for your reply, Rod
We are using the 9.2.0.5 version of the database
I am not a SQL expert, by any means, but below is the line that refers to the condition in the sql inspector
WHERE ( ( E_152 )/2 > 50)
presuambly that means E_152 is the calculation, I think this may be refering to this at the beginning of the report:
SELECT DISTINCT E316344 as E316344,E316372 as E316372,E316411 as E316411,E316425 as E316425,E316496 as E316496,E316497 as E316497,E316498 as E316498,E316510 as E316510,E316511 as E316511,E316512 as E316512,E316515 as E316515,E316517 as E316517,E316519 as E316519,E316520 as E316520,E_24 as E_24,E_21 as E_21,E_18 as E_18,E_16 as E_16,E_13 as E_13,E_11 as E_11,E316501 as E316501 FROM ( SELECT E_152 as E_152,DISTINCT E316344 as E316344,E316372 as E316372,E316411 as E316411,E316425 as E316425,E316496 as E316496,E316497 as E316497,E316498 as E316498,E316510 as E316510,E316511 as E316511,E316512 as E316512,E316515 as E316515,E316517 as E316517,E316519 as E316519,E316520 as E316520,E_24 as E_24,E_21 as E_21,E_18 as E_18,E_16 as E_16,E_13 as E_13,E_11 as E_11,E316501 as E316501 FROM ( SELECT DISTINCT i316344 as E316344,i316372 as E316372,i316411 as E316411,i316425 as E316425,i316496 as E316496,i316497 as E316497,i316498 as E316498,i316510 as E316510,i316511 as E316511,i316512 as E316512,i316515 as E316515,i316517 as E316517,i316519 as E316519,i316520 as E316520,SUM(i316501) OVER(PARTITION BY i316345 ORDER BY i316520 )/2 as E_24,( i316501-( NVL(i316502,0) ) )*( NVL(i316522,1) ) as E_21,i316501-( NVL(i316502,0) ) as E_18,NVL(i316502,0) as E_16,i316501*( NVL(i316522,1) ) as E_13,NVL(i316522,1) as E_11,i316501 as E316501,SUM(i316501) OVER(PARTITION BY i316345 ORDER BY i316520 ) as E_152
Apologies if this info is not that helpful
Would it have anything to do with the fact that the row calculation is based on several rows (i.e. a subtotal) and if a single row is excluded it would change the value of the other rows within that subtotal group. Maybe it causes some sort of circular issue?
Anyway, thanks again for your help - hopefully we can resolve it
Marcus

Missing Text when using CONVERT to PDF

I am using Acrobat Pro 9 in Wnidows 7 and Microsoft Publisher 2003.
When I use the CONVERT command to create a PDF - it is missing all of the text on the master page.
If I create the PDF with the PRINT command - everything is OK.
PS: The same Publisher File on another computer using Acrobat Pro 8 works fine - CONVERT or PRINT and no missing text
I prefer to use convert because sometimes the PRINT command drops some of the hyperlinks.
[edited by forum host - email removed]

Hi,
Could you mail be the file with which you are seeing the issue. I will investigate at my end to see what the issue is. You can mail me at [email protected]
Thanks,
Love Bisht

Cannot delete clips when using in and out points

Hi
I Cannot trim or delete clips in final cut when I'm using the in and out points. Nothing happens and the clips stays the same.
any suggestions?

Duplicate post: http://discussions.apple.com/thread.jspa?threadID=2758328&tstart=0

ORA-00917: missing comma when using NVL

Hi All,
I have a INSERT statement which works fine and looks something like:
EXECUTE IMMEDIATE
'insert into MYTABLE(ID,TASK_ROLE, PROGRESS,SALES_PERSON) values ...
However if I change the above piece to use NVL function like this:
EXECUTE IMMEDIATE
'insert into MYTABLE(ID,TASK_ROLE, NVL(PROGRESS,''0''),SALES_PERSON) values ...
I am getting the following error:
ORA-00917: missing comma
Where should I enter the extra comman needed?
Regards,
Pawel.

Hi these are in fact two simple quotes '. If I use only one simple quote I get an error:
1 error has occurred
ORA-06550: line 48, column 239: PLS-00103: Encountered the symbol "0" when expecting one of the following: * & = - + ; < / > at in is mod remainder not rem return returning <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_ LIKEC_ between into using || multiset bulk member SUBMULTISET_ The symbol "* was inserted before "0" to continue.
Same thing happens if I ommit the quotes at all and leave it like NVL(PROGRESS,0)
Edited by: padmocho on Sep 20, 2010 11:37 AM

Missing clips when using log & transfer

Similar Messages

Maybe you are looking for