Missing Code from How Tou0085Display All Comments for a Planng Package

Hi,
There is a how to paper "How ToDisplay All Comments for a Planng Package" come out recently, but I notice that the code part is missing in the appendix section,Please fix that.

Dear All,
I have two questions:
1) For the first IFRAME Version I got the same error Message as described above. Is there a solution for that available. Has somebody worked out how to use the first Version of the IFRAME coding?
2) In case of the second alternative I simply get nothing to see in the IFRAME when starting the WEB Interface. Did someone faced the same problem and how was this solved.
Thank you for every hint and help.
Kind Regards Marco Beckers
Message was edited by: Marco Beckers
To 1) I still get the message. Any help is appriciated.
To 2) The problem can be fixed if you choose cell selection for the document type.
Another point: Under the I Frame I ccan not add any further web components. Does somebody have the same problem? How can this be resolved?
Thanks and Regards Marco Beckers

Similar Messages

How To Display All Comments for a Planning Package

Hi,
I have the How-to guide mentioned in the subject and have now moved onto BI7. Is the guide still applicable in BI7 and how would I go about implementing the above How-to in IP instead of BPS?
Thanks,
Ale

Thanks Marc.
I will use BW-BPS for the time being as I've seen screenshots of the solution in the how-to. Still need to answer the question here:
How To. Display All Comments for a Planning Package
As I have no idea how to achieve the functionality detailed in the thread above.
Thanks for your time Marc,
Regards,
Ale

NOT WORKING -How To Display All Comments for a Planning Package

Hi All,
I am using How to Document "How To Display All Comments for a Planning Package" to display comments for list of "cost center" against different "fiscal/year" for Key Figure "Budget Amount".
Below is how the Layout looks like where comments are posted against Cost Center- year combination.
Cost Center                          2007     2008     2009     2010     2011
3          2.00     2.00     2.00     2.00     2.00
4          2.00     2.00     2.00     2.00     2.00
6          2.00     2.00     2.00     2.00     2.00
7          2.00     2.00     2.00     2.00     2.00
This case is very similar to the example given in how to document but after following all the steps correctly in the document and also followings various forum links such as below , I am not able to display the comments for list of Cost Centers.
"How to...BSP display comments"...problem with row comment
Below are the issues being faced:
1) When i save the comments , the icon for comments (indicating that some comments have been entered) is not shown against selection of Cost Center-Year although the comment is saved.Comment are also visible in BPS0.
2) On execution "Web interface could not be loaded" - is the message that is shown in the area where BPS application should show all the comments.
Highly Appreciate any help with issues mentioned above.
Kind Regards,
Robin Johri

Hello Robin,
1) please check if you set the row/cell selection property correctly for the layout component in the web interface.
2) the error does not make sense since the comments are displayed in an iframe using a BSP application, not a web interface. Check the URL in the HTML text component.
Regards,
Marc
SAP Techology RIG

How to give comments for a particular table

hi..
how to give comments for a particular table ..
select * from user_tab_comments;
tx in advance..

Try this.
SQL> COMMENT ON TABLE EMP IS 'THIS IS SAMPLE EMPLOYEE TABLE' ;
Comment created.
SQL> select * from user_tab_comments where table_name = 'EMP'
2 /
TABLE_NAME TABLE_TYPE
COMMENTS
EMP TABLE
THIS IS SAMPLE EMPLOYEE TABLE

How to write comments for a class

hi
how to write comments for a class

I'm reeling with incredulity, and as such am unable to do anything except just post some code
// this is a single line comment
/* this is a multiline comment.
it can be spread over as many lines as you
want */Or are you asking about how to decide what the content should be?

[svn:fx-trunk] 9919: Fix closing /code tag in an ASDoc comment for getTextFormat

Revision: 9919
Author:   [email protected]
Date:     2009-09-02 04:42:23 -0700 (Wed, 02 Sep 2009)
Log Message:
Fix closing </code> tag in an ASDoc comment for getTextFormat
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: -
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/textLayout/textLayout_textField/src/flashx/textLayout/ controls/TLFTextField.as

Welcome back everyone.
Hope you all had good holidays.
Cheers
glenn
tinylion development & design

How print all comments on as few pages as possible?

In Adobe Acrobat 9 Pro, if you select the options to print all comments, there appears to be no option to colsolidate all comments so that they fill up a page, to reduce the number of pages that you actually have to print. For example, if yo have a 100 page document, and 40 pages have a one line comment each, you have to print 40 pages. My goal would be to print only as many pages as it would take to prnt the text of the comments.
Suggestions?

I developed a script that does exactly that. Have a look here: http://try67.blogspot.com/2008/11/acrobat-create-comments-summary-txt-pdf.html
If you're interested in it, contact me by email or PM.

How to generate WebServices for PL/SQL Packages

I have the following issue trying to generate WS for a selected set of operations within a PL/SQL package
If I use the option -sql PKG_TEST then I am getting all operations within a package.
I just want to expose a certain number of procedures ( e.g. PROC1 and PROC2 )
It works only if I specify
-sql PKG_TEST(PROC1)
when I use -sql PKG_TEST(PROC1, PROC2) it gives me errors.
I have Oracle JDeveloper (10.1.3.2) (Build 4066) .
I used wsa with an plsqlAssemble option
java -jar wsa.jar -plsqlAssemble
-appName myApp
-packageName myPckg
-sql PKG_TEST(PROC1)
-dataSource jdbc/ds
-dbConnection jdbc:oracle:thin:@zzzz:1521:mydb -dbUser user/passw
-style rpc
-use literal
Thanks,
Michael Hitrik

Eric,
Thanks a lot for your help.
I was able to follow all of your recommendations
I was able to produce the single ear file for multiple PL/SQL packages .
Now I have the last step ( I hope :-) - WS-SECURITY
What is your recomendation for Security - specifically for WebServices for PL/SQL Packages ?
I would like to do the following:
CLIENT CODE:
* Create a XML element with user name, password, &
* datasource as child elements.
* Element will look like this:
* <credetials>
* <username>scott</username>
* <password>tiger</password>
* <datasource>jdbc/OracleCoreDS</datasource>
* </credentials>
Document doc = new XMLDocument();
Element elAdd = doc.createElement( "credentials");
Element elA = doc.createElement( "username");
Element elB = doc.createElement("password");
Element elC = doc.createElement("datasource");
elA.appendChild(doc.createTextNode("scott"));
elB.appendChild(doc.createTextNode("tiger"));
elC.appendChild(doc.createTextNode("jdbc/OracleCoreDS"));;
elAdd.appendChild(elA);
elAdd.appendChild(elB);
elAdd.appendChild(elC);
doc.appendChild(elAdd);
Element e = doc.getDocumentElement();
// Create an intance of the proxy
EmployeeProxy proxy = new EmployeeProxy();
// Create a Header objecy
Vector v = new Vector();
v.add (e);
Header hdr = new Header();
hdr.setHeaderEntries(v);
// Set the Header
proxy._setSOAPRequestHeaders(hdr);
SERVER CODE:
public void processHeaders(Header header)
throws java.io.IOException,
oracle.xml.parser.v2.XSLException
// Get all the Elements
Vector entries = header.getHeaderEntries();
Element e = (Element) entries.firstElement();
System.out.println("Element received from SOAP header is: " );
((XMLElement)e).print(System.out);
// Get independent nodes and retrieve node values.
Node userNode;
userNode = ((XMLNode)e).selectSingleNode("username");
userName = ((XMLElement)userNode).getText();
Node passwordNode;
passwordNode = ((XMLNode)e).selectSingleNode("password");
password = ((XMLElement)passwordNode).getText();
Node dsNode;
dsNode = ((XMLNode)e).selectSingleNode("datasource");
datasourceName = ((XMLElement)dsNode).getText();
System.out.println("User name is: " + userName);
System.out.println("Password is: " + password);
System.out.println("Datasource is: " + datasourceName);
How can this be done with the generated code using wsa tool ?
Any other suggestions ?
Thanks,
Michael

How to enable commenting for Adobe Reader users--missing menu option?

According to the help file, I can enable commenting in Acrobat Pro X so that Adobe Reader users can use annotation and commenting tools. The help file says:
"In an open PDF, choose Comments > Enable For Commenting In Adobe Reader, and then save the PDF.:"
However, all is see on my menubar is:
According to the help file, I *should* see something like the following:
I have uninstalled and reinstalled Acrobat Pro X. I have installed Acrobat Pro X on a machine that has never had Acrobat Pro installed on it. Each time I see only the shortened version of menu options.
So, why do I only see File, Edit, View, Window and Help? Where are the other menu items, such as Comments, Forms, Tools, etc? Is there something I need to do to enable them?

*Thank you*. That worked. How odd that the help file was out-of-date with my version of Acrobat. Thanks you again!

How to enter comments for each photo? Preparing photos for auction house sale.

I have a historical collection of B/W photos preparing for sale to auction houses. How do I catalog each photo with custom comments? I have LR 4.4

You'll have to type that info into that field in the metadata panel. I'm assuming you want to use the Caption, perhaps Title fields, both fields should be empty for you to enter custom text. If you select all images and enter the text, all images will get the same data. So think about what you want to pop in there and if you can do so all at once or if you'll have to do it image by image.

[Solved] How to include examples for an AUR package

Hi,
I read the wiki pages how to create packages for the AUR,
but I am not sure how to include examples which should be placed
in /usr/share/doc/<package>/examples/ after the package was installed.
Should all files be mentioned in the "sources" variable of the PKGBUILD
or is it better to copy them via the .install file?
Last edited by fana (2012-01-22 17:38:41)

fana wrote:Ah, I see. So a good way would be just providing a tarball with all the examples and add that tarball to the source array
Yup, I don't see how are these are examples different [1] from the other files.
[1] Well, apart from stuff like https://bugs.archlinux.org/task/25998 ;P

How to load classes for a particular package

I have a package name say com.test
i need to get the names of all the classes starting with "Test" under this package. Also, i need to get the names of all the methods starting with "test" in each of these classes.
ideas/suggestions welcome :)
cheers
yogesh

Kaj,
thnx for ur time :)
i am developing a testing framework for our web applications. all our applications wd require to have com.test as the package which will contain all the JUnit test classes. the package name (com.test) will be provided by the tester thru a properties file. my framework will load all the classes (and also fetch the method names starting with "test" in those classes) and display them on a gui in a html form. the tester will just select the junit test cases he wants to run and my framework will expose this service thru a servlet. the servlet will then invoke all the methods selected by the tester via reflection.
if the way i want to do it is not possible cd u please suggest any alternatives ?
cheers
yogesh

How to find Contracts for a Service Package?

Hi guys,
I need to Find Contracts based on a package (a service package offered to customers). I just know the Package ID. Which table/ API to use for getting products of this Package or Contracts where this package is used?
Regards,
Daman

Hello Daman
From service package do you mean service product or its something else
Regards
Naresh

How to identify transport for a SAP package

hey,
i know package...i am not sure..what was tranport no which was used to move test environment..
what is other option....write a transport entry...move it again..

keep the cursor on the required field and press F1, then u can get field name, table name etc.
then use WHERE USED LIST of that field, may b like T070 tbl, not sure?
ABAPer - did you read the question? It's about finding a transport number
thanq
Edited by: Rob Burbank on Feb 10, 2009 5:37 PM

How to Initiate For Creating Business Package.

Hi all,
We donu2019t have NWDI setup in our landscape; therefore I would like to know that how i can initiate for creating business package of custom specific application development using Web Dynpro JAVA and DB Oracle. If anyone has idea about this type of in-house development, please suggest.

Hi Gautam
Please setup NWDI for creating custom business pachage.
Download DTR, CBS and CMS same patch level as your Server and delpoy.
then Create Software component in System Landscape Directory(SLD) and create custom business package track in the CMS for development using Web Dynpro JAVA
Hope this will help.
Thanks
Arun

Missing Code from How Tou0085Display All Comments for a Planng Package

Similar Messages

Maybe you are looking for