Missing color adjustment and basic tool

Im currently using light room as a beginner but for whatever reason the color adjustment and basic tool is missing. How do I get it back? Thank you.

Right-click on one of the other headings such as "Tone Curve", and make sure there are checkmarks in all the sections that you want to be visible.

Similar Messages

  • Color Adjustment - Not Effecting Color Selection

    I could use some help doing color adjustment. I'm using the Color adjuster to adjust the grass in one of my photos from Green to Yellow. When I do this, some of the blades of grass are still staying Green. I added another color adjustment and selected one of the Green blades of grass with the eye dropper tool. Unfortunately when I try to adjust it, they stay the same color (green).
    Am I doing something wrong? I thought the eye dropper would be able to select the green I'm trying to adjust, so I can adjust it's Hue.

    Hmmm...
    Have you tried to expand the range parameter? Try pushing it all the way up to the max to see if you can make this adjustment have some sort of noticeable effect. You can, in fact, overload this parameter by typing a value greater than '2' into the value box - the maximum in this case seems to be '20'. (You can always pull it back or even reset it to '1.00' if required.)
    Failing that, try and make a test adjustment in, say, the water - in the bright patch at the right. I reckon it has a hue of about 215º to 200º. Sample it and push each parameter all the way to the right. This should give it a distinctive bright purpley/pinky cast. If this doesn't work for this image, then there's something fundamental we're missing here.
    Regards,
    Gary
    PS No, I don't simply look at an image and say that such-and-such an area has a hue of about 68.4º - I pulled your screenshot into Aperture and tinkered with it!

  • In Module, the Basic panel (white balance, color saturation and tonal scale) disappeared.  How can I restore these tools?

    In Develop Module, the Basic Panel (white balance, color saturation and tonal scale) disappeared.  How can I restore these tools?

    When you say the Basic panel has disappeared, do you mean the whole right side panel or individual tools such as the White Balance tool is gone? If it is the whole right side panel that is missing, you may have hidden it. Using the Tab key, you can cycle between hiding and showing the side panels. You can also move your mouse over to the far right side of your screen to get the panel restored but it will disappear when you move your mouse off the panel. There is also a small triangle on the left edge of the right panel that you can right click on in order to determine the show/hide behavior (I personally use the manual mode).
    Regarding the individual windows contained in the left/right panels, they can be opened and closed by clicking of the triangle that is displayed next to name of the tool in its header bar. While you can elect what modules will be shown on the LR Top panel, I am not aware of any mechanism to completely hide individual tools in the left/right panels. If all else failes, you can hit the Shift/Tab key combo a few times to restore all of your windows the the default behavior.

  • Since the 12/9/14 update of Adobe Acrobat XI Standard to 11.0.10 I have lost the basic colors of the highlighting tool. How do I fix this?

    Adobe Acrobat XI Standard to 11.0.10 I have lost the basic colors of the highlighting tool. How do I fix this?

    Hi,
    It appears that this was a bug that was introduced in the latest update. Others have been able to resolve this issue by using the Acrobat Cleaner tool to uninstall and then reinstall Acrobat. You might try this if you have a few spare moments.
    And can you please share the problem PDF  which was working correctly in the earlier version.
    Thank you

  • Dodge and Burn Tool basicly stopped working.

    For some reason the Dodge and Burn Tool in Lightrooom 5.4 basicly stopped working. It will only make a slight adjustment no matter how much I change the exposure value. Does anyone know what could be causing this?

    Do you have the flow and/or density of the Adjustment Brush set to a very low level?

  • Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time...

    Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I add/install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time... Thanks.

    Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I add/install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time... Thanks.

  • Vignetting added and color adjusted immediately post import into Lightroom5.

    Vignetting added and color adjusted immediately post import into lightroom5.
    My photos from my most recent trip, when imported into Lightroom, have a heavy vignette very close to all 4 corners of the photo, and seem to have some small adjustments being done to them immediately when I import. The thumbnail looks great, and when i import --> then select it to open it as if I was going to view it full size in Lightroom, it looks great [no vignetting or tone/color adjustment] for about 1-2 seconds while a 'loading' footer is shown, following which the color is slightly altered and the vignetting is added (at this point then the thumbnail changes as well). This is a significant and noticable change to the photo. The pictures also do not have these issues if I view them through any other software. I have Can any one help me figure out what is causing this and remove it?
    I shoot
    with a Sony Alpha6000
    shoot in RAW (.ARW)
    use the standard sony kit lens that comes with the camera bundle, lens SELP1650 (3.5-5.6/16mm-50mm)
    edit on Windows 7 64bit with Lightroom5
    and don't believe I've adjusted any camera settings since last taking pictures 1 week ago with the exact same lens. I looked at photos from my last trip (only one week ago), and none of them are having these or an alterations/changes upon import.
    I took over 300 photos last weekend wthout any sign of these issues post import
    Every single photo I took this weekend seems to have this same issue.
    Any help is appreciated!

    Vignetting added and color adjusted immediately post import into lightroom5.
    My photos from my most recent trip, when imported into Lightroom, have a heavy vignette very close to all 4 corners of the photo, and seem to have some small adjustments being done to them immediately when I import. The thumbnail looks great, and when i import --> then select it to open it as if I was going to view it full size in Lightroom, it looks great [no vignetting or tone/color adjustment] for about 1-2 seconds while a 'loading' footer is shown, following which the color is slightly altered and the vignetting is added (at this point then the thumbnail changes as well). This is a significant and noticable change to the photo. The pictures also do not have these issues if I view them through any other software. I have Can any one help me figure out what is causing this and remove it?
    I shoot
    with a Sony Alpha6000
    shoot in RAW (.ARW)
    use the standard sony kit lens that comes with the camera bundle, lens SELP1650 (3.5-5.6/16mm-50mm)
    edit on Windows 7 64bit with Lightroom5
    and don't believe I've adjusted any camera settings since last taking pictures 1 week ago with the exact same lens. I looked at photos from my last trip (only one week ago), and none of them are having these or an alterations/changes upon import.
    I took over 300 photos last weekend wthout any sign of these issues post import
    Every single photo I took this weekend seems to have this same issue.
    Any help is appreciated!

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • Does Touch have "remove color cast" and adjust lighting - levels like Photoshop Elements?

    Does Touch have "remove color cast" and adjust lighting -> levels like Photoshop Elements?

    There isn't a "remove color cast" command per se but there are Levels and Curves adjustments so you can effectively remove/diminish colors yourself.

  • I have some how lost my basic and curve tools... How do I recover them?

    I have lost my basic editing tools and curve tool. How do I recover them in Lightroom 5?

    When you did the Cmd-click, did it bring up a little list of all the different sections and allow you to add/remove checkmarks? Somehow we are not communicating very well, and that's probably because I don't know anything at all about Mac computers.

  • Lightroom libary and development tool shows different colors

    My problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.
    When I switch between libary and development tool sometimes, the development tool shows then the same colors.
    Alfred

    Is your monitor profiled and calibrated, with a hardware tool (e.g. Spyder, Colourmunki etc)? 
    If there's no profile, or it's faulty, there can be problems.  In Develop module LR uses ProPhoto RGB colour space, but in Library module it uses Adobe RGB.  They'll look different if colour management isn't working, which requires a monitor profile that contains colour space information. 

  • I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes.   I hav

    I am having a problem changing a color in a selected area. Using the Quick Selection tool I am able to select the area I wish to change. Using the Brush tool, color, color mode and click drag in my selected area, nothing happens, no color changes. I have viewed some videos and read numerous articles but haven't found the one to help me. Please point me in the best direction. Thank you Vincent TC

    For the sake of clarity and to save people time, Todd is asking about the behaviour of the Patch tool when using it to repair the area next to the young lad's head.  Todd gets a blurred dark tone pretty much regardless of the options he uses.
    IMO that's what I would expect to happen because of the close proximity of the other image elements i.e. the lad's neck and the strong lines of his shirt.  I would not choose to use the Patch tool in this situation.  Content Aware Fill makes a better stab at it. 

  • Final cut export edl and cinema tools database.  at last,  imort  to color.

    final cut pro 7.0.3 and color 1.5.3
    final cut edit prores clip with Log and transfer,export edl and cinema tools generate database. at last, imort to color.
    but in Color,all files alway offline,the short name is Aux.Why?

    I succeed to do it ago.But now it fail.Why?

  • Color adjustment on Multi-cam clip in 10.1 not working and crash the app

    In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
    However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
    Anyone having similar issue?
    Any solution?

    In version prior to 10.1, I can do color adjustment on multi-cam clip and I can see the color change right away.
    However, when I do the same action in 10.1, the change doesn't reflect immediately on the viewer. I need to move like a frame to have the effect shown. Sometimes, FCPX shows an error when I do that action and force me to quit the application.
    Anyone having similar issue?
    Any solution?

  • Why is migration tool so erratic and basically useless?

    why is migration tool so erratic and basically useless?

    It worked for me everytime and everytime i got what i wanted. Maybe you are doing something wrong?
    Maybe you are expcting a bit to much...

Maybe you are looking for