Missing communication channel parameters after upgrade to PI 7.0

Hi,
we have upgraded XI 3.0 to PI 7.0 following the steps guide without any problem.
The SLD has been reconfigured.
And XI Content with corresponding version and support package level was imported.
But when we try open the communication channels in ID, does not show us the parameters. Besides, does not let us to create a new communication channel. It seems like doesn't recognize the type adapters.
This problem is with file, rfc, jms types. And we can create channels with XI, http and idoc type.
All the channels works correctly before upgrade.
Thank you very much in advance for your help.

HI,
I am not sure but check the Parameters in section AdapterFramework in exchange profile also do the CAP cache.
Give a try.
http://help.sap.com/saphelp_nw70/helpdata/en/c6/6f1741b393f26fe10000000a1550b0/frameset.htm
Thnx
Chirag

Similar Messages

03113 end-of-file on communication channel | Oracle 11g Upgrade

Hi,
Whilst upgrading our DEV system from 10.2.0.4 to 11.2.0.1 using DBUA
with a powershell script , the upgraded failed with the error "ORA-
03113 end-of-file on communication channel" during the "Upgrading
Oracle Server" section.
The oracle 11g service is created but it cannot start.
The oradim.log reports
03113 end-of-file on communication channel also.
The alert log just show the database tries to start and reports the parameters from the pfile it's using but then stops without any error message.
All the pre-upgrade tasks are done and there was no errors. This is on Windows 64bit 2003.
The server is vmware , not sure if this could be an issue.
It was possible to roll back using the dbua script and bring the system back up with 10g.
Anyone come across a similar issue ?
Thanks
Jim

ORA-3113 are well known output from a connection to database lost of a reason.
Oracle says this reconnect and try again as solution.
If you got the same error on the same place /job, investigate the script/job.
Regards
Audun
DBA

Environment or system variables in PI Communication channel parameters

Is it possible to use any of the system/environment variables in the PI Communication channel parameters ? Please point me to the documentation. I know I had seen it on SDN sometime but can't seem to be able to find the link.
I am not interested in ASMA or variable substitution.
Thank you,
Sridhar

I don't know anything other than Asma, DynamicConf, VariableSubs, etc...
There're some system variables like "%f" or "%F" usable in FileAdapter channel (OS command box)

Role for Changing communication Channel parameters

Hello All,
I'm looking for a role that gives access to Changing communication Channel parameters in Integration Directory. I know that SAP_XI_ CONFIG_J2ee gives this access but is there a way to assign any security role or any component so that it gives access to just Changing communication Channel parameters in Integration Directory instead of giving access to the whole IB:Configuration.
Thanks in Advance

Hi
dont have idea but maybe u can get idea about assigning role from these,
see if it helps
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/0c86aab4d14dece10000000a11466f/frameset.htm
regards
Pratibha

About Communication Channel Parameters

What is Variable substitution (target dir/filename scheme) parameter, Run OS command before Message processing and Run OS command after Message processing parameters in the Communication Channel, where we can use this parameters(i.e which type of scenarios)
Edited by: Venkataramesh B on Feb 20, 2008 1:16 AM

Run Operating System Command Before/After Message
Processing
●      Command Line
The operating system command specified here is executed before or after successful file processing. The default value is an empty character string (no command).
When the operating system command is called, the file name currently being processed can be specified with the following placeholders:
%f (file name)
%F (absolute file name including path)
●      Timeout (secs.)
This specifies the maximum runtime of the executing program in seconds. When this time interval is exceeded, the adapter continues processing. The executable program continues to run in the background.
●      Terminate Program After Timeout
Set this indicator if the adapter is to terminate the executing program in the event of a timeout.
The adapter writes the output (STDOUT and STDERR) for the operating system command in the system trace.
check this link for the details:
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm

Communication channel parameters not preserved on import

Hi gurus,
I noticed that on doing an export from dev and import into qa, i was not able to activate the imports as the parameters for server..etc in the communication channel were missing...is this routine.. or ..??
Any ideas...
Venkat

Hi,
While transporting we miss some parameters in QA or PRD there we have to again mention them.
check some links how to tranport.
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Regards,
Phani
Reward points if Helpful

Drivers missing for Envy 6 after upgrade to windows 8

There are a few missing drivers shown on the device manager after Upgrade to windows 8 for model: Envy 6-1006TX.
The four items are:-
1. PCI Device
2. PCI Simple Communications Controller
3. Unknown device
4. Unknown device
I try to find it on the support and download page on the product support but could not find.
i even go to HP Support Assistant website to try download the support assistant for window 8, but the links is not working.
Can anyone assist ? Thanks

Enter the Device Manager in Windows 8 by holding the Windows key and tapping the x key once. In the menu that is invoked, select the Device Manager. Right-click on the unknown device and then select the details tab. See the following image. I arbitrarily selected a device as an example.
Post the image by using the snipping tool. The snipping tool can be found by using the Windows key + x and selecting search. Type in "snipping" and the snipping tool link will appear for you to click on it and use as in the following image.
Post all that is before the &SUBSYS in the top PCI\VEN alphanumeric string and I can use it to see if the manufacturer of the device has posted a Windows 8 driver. Sometimes the success rate for finding a driver is greater at the manufacturer website.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Voice memo missing on iphone 4s after upgrade to ios 7

voice memo app is missing on my iphone 4s after upgrading to ios 7. any ideas?

Miracle!!!!!!
The iOS 7.1 update solved the WIFI issues on my iphone.
I'll try to upgrade my ipad later on and then
I think I can sell my hairdryer and my freezer.
Thanks to the people @ infinite loop ;-)

Missing files - corrupt library after upgrade to 11.1.4

I updated iTunes to 11.1.4, and after launching, it looked like it was updating my library as it's done in the past. However, this time, after an hour I realized it had not yet completed, and a dialogue box asking about creating an iTunes U playlist was on the screen. I tried to do so, but it just kept repeating. So finally I stopped it, and now I have an file marked iTunes library (damaged) and an incomplete library. I am missing thousands of songs compared to the last .itl I have in Previous iTunes Libraries.
I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
Thanks in advance.

I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
No, you need to do the backup as part of regular computer maintenance and before you do any software upgrades. iTunes moves the old library into the previous library area but perhaps your update failed before it did that.
How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
Yes, there's one on the Dougscripts web site that will crawl through a library. In yur case it's probably just as easy to drag the whole iTunes media folder to Automatically Add to iTunes. Anything already in the library it will ignore. Anything not there it will add.

Sender communication channel stopped after error "Connection Timed Out"

Hi experts,
in our scenario we have an asyncronous sender communication channel with polling every 6 seconds to an external FTP server.
Yesterday evening a "Connection Timed Out" error came.
After this error the polling stopped but channel in communication channel monitoring still remains green.
So status green but no polling.
To solve this problem we stopped and then restarted channel from CC monitoring.
The channel is configured "manually".
The question is: Is it possible to avoid this problem? Maybe there's a parameter in configuration to set?
After a time out error the channel must go on polling, it should not stop. Or it must shows red status.
Thanks
Fabio Boni

HI,
I think PI level is "SAP J2EE Engine 7.00 PatchLevel 109886.44"
Thanks
Fabio

Communication channel parameters are not tranported in CTS+ transport

Hi,
My scenario is MDM to jms.
we have configured the cts+ transport in our system.
We transported the ESR and ID objects from development to Quality.
But in the sender mdm communication channel the everything is getting transported except Repository password.
when i checked in the quality system the Repository password was blank.
And receiver jms communication channel details are in
dev system
IP Address or server Name:135.12.14.12
server port                          :3321
Queue manange name       :RRTYRKB
channel name                  :KDIEKE.MDM
Quality System
IP Address or server Name:localhost
server port                        :1414
Queue manange name       :QM_hostname
channel name                    :S_hostname
i want know whether this is the case when we do the cts+ transport?
if it is the case should i edit the objects in the Quality sysem(which i don't want to do).
Thanks.
Regards,
Muniyappan.

Hi,
>>>if it is the case should i edit the objects in the Quality sysem(which i don't want to do).
communication channel attrubites always get reset in the new env - TEST, PRD, etc.
and you always need to fill them once more - this is the normal way
otherwise - would you like to use DEV parameters on PRD system ?
maintaining the channel attributes is a typical task on all landscapes
Regards,
Michal Krawczyk

SLD, Business System and Missing Communication Channel

Interesting issue here....
I created a business system, assigned the logical system, ...etc..etc
Imported the swcomp into ID.........completed the scenario..
Now in Communication channel monitoring i dont see the communication channel that i created for the System, i can see it on XI under sxi_cache...........under the business system, I dont see it in communication channel monitoring.
Venkat

Hi,
>>...i dont see it..thats what i meant...no messages for that adaptor,
Clear the Meta Data IDX1 and check the port as Ravi Mentioned IDX2.
After clearing the Meta data try to manually load the Meta data and test it.
Regards
Agasthuri Doss

Communication channel parameters for XI receiver adapter

Hi
I am implementing a ABAP server proxy - to do this, I am creating a XI adapter type - Receiver communication channel so that messages from XI go to ---> the R3 system wherein the proxy is implemented.
I have seen a weblog with a sample defn of communication channel of this adapter type , but the illustration there is not clear enough.
Based on documentation for this in help.sap.com, I have the following questions :
1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( <b>Pipeline specified in URL attribute not existing</b> ) when I test the SM59 connection in XI...
Any pointers on what am I missing here ??

Hi Karthik,
>>1. Do we have to setup a HTTP type destination in the XI box pointing to the R3 system ( on which ABAP proxy is implemented ) . I guess this is the case, since XI needs to find the connection to the R3 box to pass the proxy message to it .
Based on 'addressing type' field in XI adapter you can either specify HTTP destination in communication channel or provide all the required details in the communication channel itself.
>>2. If we do have to setup a HTTP type destination in XI pointing to R3, what is the path prefix and service number field values that need to be given...
I tried putting in /sap/xi/engine as path prefix and 8000 as service with the logon credentials for the R3 system and I get a status code error of 500 ( Pipeline specified in URL attribute not existing ) when I test the SM59 connection in XI...
use the URL /sap/xi/engine?type=receiver
Also make sure that your R/3 is set up as a local integration engine for proxy communication..
Check this..
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Regards
Anand

Standard table that stores communication channel parameters

Hi All,
Can you tell me if there is a standard table that stores the parameters of communication channel?
For example, Which table has the value of "Quality of Service" in "Processing Parameters"?
Regards,
Nisha

Can you tell me if there is a standard table that stores the parameters of communication channel?
not aware of a standard table....each communication has its own QOS.....you can check it in the log in SXMB_MONI....opne the particular message processing and look in the upper window (Window 1) where all the details are mentioned.

You Tube App Missing on iPad 2 After Upgrade to iOS 5

I have an iPad 2 that I purchased from a US Apple store in May 2011. After upgrading to iOS 5 the You Tube app is missing. How can I reinstall it?

That is one of the standard apps that is not deletable. So it is probably there somewhere.
Check setting, general, restrictions, and make sure you didnt turn that on by accident.
Then goto the searchlight screen, and type in you tube, and if the app is on the pad, it will find it.
If restrictions are not on, and if searchlight does not find the app, do a full reboot,
If still no joy, do a restore from backup.
But check restrictions first.

Missing communication channel parameters after upgrade to PI 7.0

Similar Messages

Maybe you are looking for