Missing conference ID while scheduling an online meeting

Hi,
I've deployed a Lync server 2010(4.0.7577.0) and an Exchange 2010(14.00.0639.021) for our video/audio calls/conferences.
When I schedule an online meeting in the outlook, I could see the meeting web access link (https//...), but couldn't find the conference ID parameter in this meeting invitation. I assure i've enabled the a/v conference and web conference services in
Lync topology builder, and all server services seems working fine, and my conference policy is set by default.
Are there any other configrations i've missed?
thanks.

sorry, may i know how you assigned a phone number under Conferencing > Dial-In Access Number?
may i have the step? thanks

Similar Messages

  • Time issue while scheduling meeting in meeting place 8.0

    Dear Team,
    I am very new to Meeting Place  system. Here we have version 8.0 and i am facing below issue.
    While scheduling meeting when i have mentioned start time as 13.30 and end after 30 min.
    but the issue is user can join the meeting before 13.30 and thats is security issue
    i would like to know how to restict this. my requiremnt is user can only join before 10 min.
    Regards
    Hari

    Hi Hari,
    Is you MeetingPlace 8.0 integrated with WebEx, or it is an Audio Only solution?
    If you are scheduling meetings in Audio Only solution, you can specify "Early meeting start (minutes)" variable in System Configuration > Meeting Configuration.
    If you have WebEx integration and WebEx scheduling, you would need to specify a default "Join before host", but every host would have to configure that for their own profile.
    -Dejan

  • Error while scheduling report for SAP users

    Hi All,
    We have SAP authentication enabled in our BO environment. (BO XI 3.1 sp2 FP 2.6 on windows 2003 server).
    There are some webi reports based on BW Bex queries that we are trying to run on behalf of certain SAP end users. This we are doing using "schedule for" option.
    Now what is happening here is if the end user has logged in once in BO system ,it runs fine. But in case user has not logged in to BO (using infoview etc.) ,it throws error saying "incomplete logon data" . Also if user changes or reset his password in BW and if he doesn't login to infoview after that ,system throws another error "Name or password incorrect (repeat logon)".
    Based on these observation, we are suspecting if BO system uses stored SAP users credentials while scheduling report for them based on their last login.
    Would like to mention here that we have checked option "automatically import users".
    Please advice if this behavior is normal or we are missing some setting.
    Thanks in advance,
    Chandra

    Hi All,
    Any pointers or suggestions for this issue ??
    Is there a setting/option avialable in CMC which could resolve these errors.
    Or, user has to login once to infoview in all circumstances to avoid these errors.
    Thanks,
    Chandra

  • FTP Delivery Destination Not visible while scheduling a report.

    Hi All,
    We are implementing BI Publisher 11g (As part of OBIEE 11g).
    In BI Pub administration we have defined FTP and Email Delivery Destinations.
    But while Scheduling a report, under Destinations we see only Email option, we are not seeing FTP option.
    Is this happening due to any of the missing configuration or any privileges are missing?, please clarify.
    Thanks,
    Aditya

    Do you have "Use Secure FTP" checked?
    I tried adding a source with that checked and the FTP option didn't show up either, but when I unchecked that box I was able to see the FTP option.

  • An exception was caught while scheduling the publication. (FBE60203)

    Hi All,
    Iam getting below error when  am using publication to send doc to personal email.
    Please advice me to find out the solution, thanks in adavance...
    Error Message:
    ERROR [PublishingService:HandlerPool-124] BusinessObjects_PublicationAdminLog_Instance_177746 - [Publication ID # 177746] - An exception was caught while scheduling the publication. (FBE60203)
    com.crystaldecisions.sdk.occa.infostore.internal.InfoStoreException: Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'ScopeBatch177754' (ID: 177754). Please contact your administrator if you require this right.
    cause:com.crystaldecisions.enterprise.ocaframework.idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
    detail:Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'ScopeBatch177754' (ID: 177754). Please contact your administrator if you require this right.

    Hi,
    This error messgae occurs when the 'Edit Objects' right is missing for the published reports.
    These are the rights required to schedule a publication :
    1. Login to CMC with Enterprise Administrative account
    2. Navigate to Users and Groups >> Top-level security >> All Users
    3. Add the required group/user facing the issue > Advanced > Add/Remove rights > General
    4. Grant View objects and Subscribe to objects
    5. Navigate to the folder where publication is there > User Security
    6. Add/Remove Rights > At General level grant following rights:
    - Schedule on behalf of other users
    - Modify the rights users have to objects
    - Edit objects
    - Copy objects to another folder
    - Schedule document to run
    - Schedule to destinations
    Regards,
    Yosra

  • Enable users and schedule a lync meeting via a webapplication

    dear
    my question is that i have a web service joined into my domain and then we  have an exchange server and recently add  lync server 2013(and edg server and sql)
    i want register external users(browsing user) in lync server and
    trying to schedule a lync conference . After creating the conference I send the ConferenceUri to the users and let them join the conference
    first i add users into ldap and then enable exchange email for them (by my web ) and now i want enable them in lync and create schedule a lync meeting 
    the problem is that i dont know which way is usefull for me? lync sdk , ucma 4 , ucwa , powershell , ...
    but all of this ways need an Installed lync server in developing machine .right?
    my web service is none hosted lync installed. please help my(in other word i want try that:
    http://stackoverflow.com/questions/21019286/schedule-a-lync-conference-with-ucma-3-0
     . how do that?

    Hi,
    From your description, did you mean you have install Exchange Server and Lync Server 2013 (including Edge server) successfully?
    If you have deploy Exchange Server and Lync Server 2013 in the same domain, you should use user’s email address as your Lync account. They will be integrated already. You can just create a schedule Lync meeting on Outlook and send to who you want to invite
    to the meeting. If you also want external users to download meeting content for your meetings you also need to deploy a Reverse Proxy in DMZ zone. If the external users don’t have a Lync account, they can also join the meeting as a guest.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • I tried to join an online meeting. Mozilla rejected the site. I added the site to allowed sites through exceptions but it still won't allow site?

    Every attempt to join the online meeting failed. I kept getting a not trusted site message. I could hear the conference call but I could not see the info presentation.

    Sometimes, sites divide their content and login logic over multiple servers. In that case, the sites may not recognize that you have logged in if you block third party cookies. Can you check your cookie settings, as described in this article: [[Websites say cookies are blocked - Unblock them]].
    During your earlier troubleshooting, did you try the site in Firefox's Safe Mode to rule out an extension as the potential culprit? More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?

  • Conversion to Online Meeting

    In Lync, how would I convert one occurrence of an in-person meeting in a series to be an online meeting?

    You can refer to the following article for more details:
    http://office.microsoft.com/en-us/communicator-help/work-smart-schedule-and-join-an-online-meeting-HA101871367.aspx
    Regards, Kent Huang TechNet Community Support ************************************************************************************************************************ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark
    as Answer” if a marked post does not actually answer your question.

  • Lync online meeting issue

    i have installed 2010 ms office home and business for my laptop.and i have installed ms office 2013 lync ,now i am unable to view that lync icon to scheduled
    online meeting. Please give me the solution for this. 

    Open outlook, click FILE. Click Options and then click Add-ins. Check Lync Meeting Add-in for Microsoft Office 2013 is enabled.
    Lisa Zheng
    TechNet Community Support

  • Error while Scheduling Full DB back up?

    Hi gurus,
    I got error while schedule full DB back up. I am follow all the steps.but i got this error.
    1. go to DB13
    2. select Day
    3.select full DB backup
    4.select time
    5.select sid, msdb,inttape,verify backup
    5.add.
    our DB is MS-SQL server Data Base
    client :222   user: admin
    error: User not connected
    2008-04-10 14:28:06.89 Server      Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
         Apr 14 2006 01:12:25
         Copyright (c) 1988-2005 Microsoft Corporation
         Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
    2008-04-10 14:28:06.89 Server      (c) 2005 Microsoft Corporation.
    2008-04-10 14:28:06.89 Server      All rights reserved.
    2008-04-10 14:28:06.89 Server      Server process ID is 308.
    2008-04-10 14:28:06.89 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
    2008-04-10 14:28:06.89 Server      This instance of SQL Server last reported using a process ID of 308 at 4/10/2008 2:24:10 PM (local) 4/10/2008 8:54:10 AM (UTC). This is an informational message only; no user action is required.
    2008-04-10 14:28:06.89 Server      Registry startup parameters:
    2008-04-10 14:28:06.89 Server            -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
    2008-04-10 14:28:06.89 Server            -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
    2008-04-10 14:28:06.89 Server            -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
    2008-04-10 14:28:06.90 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2008-04-10 14:28:06.90 Server      Detected 8 CPUs. This is an informational message; no user action is required.
    2008-04-10 14:28:07.06 Server      Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
    2008-04-10 14:28:07.20 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2008-04-10 14:28:07.21 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
    2008-04-10 14:28:18.89 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
    2008-04-10 14:28:18.89 Server      Database mirroring has been enabled on this instance of SQL Server.
    2008-04-10 14:28:18.89 spid4s      Starting up database 'master'.
    2008-04-10 14:28:18.96 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    2008-04-10 14:28:19.00 spid4s      SQL Trace ID 1 was started by login "sa".
    2008-04-10 14:28:19.01 spid4s      Starting up database 'mssqlsystemresource'.
    2008-04-10 14:28:19.04 spid4s      The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
    2008-04-10 14:28:19.18 spid4s      Server name is 'ERPPRD'. This is an informational message only. No user action is required.
    2008-04-10 14:28:19.18 spid9s      Starting up database 'model'.
    2008-04-10 14:28:19.29 spid9s      Clearing tempdb database.
    2008-04-10 14:28:19.37 spid9s      Starting up database 'tempdb'.
    2008-04-10 14:28:19.39 spid9s      Analysis of database 'tempdb' (2) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
    2008-04-10 14:28:19.40 spid12s     The Service Broker protocol transport is disabled or not configured.
    2008-04-10 14:28:19.40 spid12s     The Database Mirroring protocol transport is disabled or not configured.
    2008-04-10 14:28:19.40 spid12s     Service Broker manager has started.
    2008-04-10 14:28:19.42 Server      A self-generated certificate was successfully loaded for encryption.
    2008-04-10 14:28:19.43 Server      Server is listening on [ 'any' <ipv4> 1433].
    2008-04-10 14:28:19.43 Server      Server local connection provider is ready to accept connection on [
    .\pipe\SQLLocal\MSSQLSERVER ].
    2008-04-10 14:28:19.43 Server      Server named pipe provider is ready to accept connection on [
    .\pipe\sql\query ].
    2008-04-10 14:28:19.43 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
    2008-04-10 14:28:19.43 Server      Dedicated admin connection support was established for listening locally on port 1434.
    2008-04-10 14:28:19.43 Server      The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
    2008-04-10 14:28:19.43 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
    2008-04-10 14:28:19.48 spid21s     Starting up database 'msdb'.
    2008-04-10 14:28:19.48 spid23s     Starting up database 'SRM'.
    2008-04-10 14:28:19.48 spid22s     Starting up database 'PRD'.
    2008-04-10 14:28:20.29 spid23s     Analysis of database 'SRM' (6) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
    2008-04-10 14:28:23.40 spid22s     Analysis of database 'PRD' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
    2008-04-10 14:28:23.95 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
    2008-04-10 14:28:23.95 spid4s      Recovery is complete. This is an informational message only. No user action is required.
    2008-04-10 14:28:26.37 spid51      Using 'xpsqlbot.dll' version '2005.90.2047' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
    2008-04-10 14:28:26.53 spid51      Using 'xpstar90.dll' version '2005.90.2047' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
    2008-04-10 14:28:26.57 spid51      Using 'xplog70.dll' version '2005.90.2047' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
    2008-04-11 00:00:56.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
    2008-04-11 16:44:23.89 spid112     DBCC CHECKDB (PRD) started at Apr 11 2008  4:44PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
    2008-04-11 16:52:47.53 spid107     DBCC CHECKDB (PRD) started at Apr 11 2008  4:52PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
    2008-04-11 17:00:01.48 spid115     DBCC TRACEON 3605, server process ID (SPID) 115. This is an informational message only; no user action is required.
    2008-04-11 17:00:10.45 spid115     Error: 18204, Severity: 16, State: 1.
    2008-04-11 17:00:10.45 spid115     BackupTapeFile::OpenMedia: Backup device '
    .\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
    2008-04-11 17:00:10.67 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
    .\tape1)'. This is an informational message. No user action is required.
    2008-04-11 17:00:10.65 Backup      Error: 3041, Severity: 16, State: 1.
    2008-04-11 17:00:10.65 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
    2008-04-11 17:00:11.18 Backup      Tape 'Media created 3/29/2007 at 2:43 PM' was dismounted from drive 'R3DUMP0(
    .\tape0)'. This is an informational message. No user action is required.
    2008-04-11 17:00:15.54 spid101     DBCC TRACEON 3605, server process ID (SPID) 101. This is an informational message only; no user action is required.
    2008-04-11 17:00:15.60 spid101     Error: 18204, Severity: 16, State: 1.
    2008-04-11 17:00:15.60 spid101     BackupTapeFile::OpenMedia: Backup device '
    .\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
    2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
    .\tape1)'. This is an informational message. No user action is required.
    2008-04-11 17:00:15.60 Backup      Error: 3041, Severity: 16, State: 1.
    2008-04-11 17:00:15.60 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
    2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP0(
    .\tape0)'. This is an informational message. No user action is required.
    2008-04-11 17:02:57.57 spid114     DBCC CHECKDB (PRD) started at Apr 11 2008  5:02PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
    2008-04-11 18:30:37.75 spid112     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 46 minutes 14 seconds.
    2008-04-11 18:54:52.10 spid114     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 51 minutes 55 seconds.
    2008-04-11 18:55:25.00 spid107     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 2 hours 2 minutes 38 seconds.
    2008-04-12 00:00:30.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
    This is error
      anybody help me.
    Regards,
    balaram
    Edited by: balaram reddy on Apr 14, 2008 8:44 PM

    If your ECC6 is on SP12 and above, use t-code : DBACOCKPIT or DB13OLD
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0dc0752-2502-2a10-2a93-94823467ca79

  • Error while scheduling VerifyDB in DB13

    Hi,
    I am facing an error while scheduling VerifyDB through DB13 in my SAP ECC 6.0 system. This problem is occuring in the entire landscape(Dev, Quality & Prod) after i did an oracle upgrade from 10.1.0.4 to 10.2.0.2. The error is as below:
    BR1301W Error message from likeywlib:
    ===...could not load SSF library libsapsecu.so .
    BR1301W Error message from likeywlib: likey_init: Couldn't load SAPSECULIB ("libsapsecu.so") using function SsfSupInit (), rc = 10.
    BR1302E Initialization of license key library likeywlib failed, return code 1
    BR0602E No valid SAP license found - please contact SAP
    I also checked the note 912969 which gives the below solution:
    The error is corrected in BRSPACE 7.00 patch 10
    But the BRSPACE is already on a higher patchset (18). Patch 10 is already applied.
    Can somebody please guide me on this.
    Thanks & Regards,
    Smitha

    Hi Andreas,
       the error is exactly the same.
    The database is Oracle 10.2.0.2 and the backup is performed with a mix of BRtools and Legato.
    Any idea?
    Thanks
    Gianluca

  • Error while scheduling through web service

    We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to  "Automate the Scheduling of Reports" according to our requirement:
    1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
    2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually. 
    3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
    Above requirements are not currently available with Oracle BI Publisher.
    We are getting error while scheduling through ScheduleRequest class.
    The client.java is as follows:
    public class ScheduleServiceClient
      @WebServiceRef
      private static ScheduleService_Service scheduleService_Service;
      public static void main(String [] args)
        scheduleService_Service = new ScheduleService_Service();
        ScheduleService scheduleService = scheduleService_Service.getScheduleService();
        // Add your code to call the desired methods.
        try {      
                    FTPDeliveryOption ftpdo =new FTPDeliveryOption();
                    ftpdo.setFtpServerName("ServerName");
                    ftpdo.setFtpUserName("Username");
                    ftpdo.setFtpUserPassword("Password");
                    ftpdo.setRemoteFile("/path/TestFile");
                    ftpdo.setSftpOption(true);
                    List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
                    listobj.add(ftpdo);
                    ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption(); 
                    ar.setItem(listobj);
                    DeliveryChannels dc = new DeliveryChannels();
                    dc.setFtpOptions(ar);
                    ScheduleRequest scheduleRequest = new ScheduleRequest();
                    scheduleRequest.setDeliveryChannels(dc);
                    scheduleRequest.setJobLocale("en-US");
                    scheduleRequest.setUserJobName("Job_1_WebService"); 
                    scheduleRequest.setDataModelUrl("Url");
                    scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
                    scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
                    String userID = "BI_Publisher_Username";
                    String password = "BI_Publisher_Password";
                    scheduleService.scheduleReport(scheduleRequest,userID,password);
                } catch(Exception exception) {
                    exception.printStackTrace();
    Snapshot of error is attached.
    Kindly suggest the way of getting out of this error.

    Hi
    Check this thread
    WD Message Manager
    Reward opints if usefull....

  • Error while scheduling the report in bi publisher

    oracle.apps.xdo.servlet.scheduler.ProcessingException: Error occurred while scheduling the job.
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.getDateObject(SchedulerServlet.java:2202)
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1394)
         at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:289)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:80)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)

    Hi,
    I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

  • Getting error while schedule a webi report

    Hi All,
    I am getting error "A database error occured. The database error text is: The supplied XML is not valid. [Measures].[4KO5AOUTL3ZKE55WDDOMUB0AI]. (WIS 10901) " while scheduling a Webi report.
    Could anyone help me regarding the error?
    Regards

    Hi Manoj,
    Go to the controls tab in parameters in universe designer and there increase the "Limit size of result set to" and "limit execution time to".
    Also in webi go to the edit query and increase the "maximum rows retrived" and "maximu retrievel time".
    I think this should avoid partial results.
    Thanks,
    Neeraj

  • Error Code:942 While Scheduling a report in BI Publisher

    Hi All,
    I am trying to schedule one report in BI Publisher.
    After Clicking Submit Button while scheduling report,i get following error:
    Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
    Kindly Help me in resolving this issue
    Regards
    Amrita Singh

    i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
    I would recommend, you to install the scheduler in another schema or another db.
    Re-installing the scheduler schema tables will fix this.

Maybe you are looking for