Missing content for inventory management (cube 0IC_C03)
Hi everybody,
I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
How can I find this missing content. We are using BI Content Release 704 Level 1.
Thanks for your help!
Thomas
Hi Oscar,
unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
Thanks in advance!
Thomas
Similar Messages
-
Inventory Management Cube 0ic_c03, 0StockType
In the Inventory Management Cube 0ic_c03 queries,I've found that 0StockType has descriptions that are misleading because of the way they are written in domain bstaus (R3 side), especially when seeing the key and SHORT description (truncated beyond meaning).
OK I can correct these by changing BStaus 's texts.
The main changes I'd do are for the Customer Consigment, Customer Return Packaging and Material Provided to Vendor descriptions.
But what does 0StockType 'blank' (or #) mean ?
(It seems to mean something like Valuated Stock Valuation and 'Not Defined' is not very good in a Query result)Well, no one replied, but I got feedback from OSS. So just in case anyone is interested.....
I had to use r3 > se11 to change the domain descriptions myself.
Bstaus 'blank' I put as 'Valuation'
I also improved some of the Bsttyp descriptions whilst there -
Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working
Hello all.
I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures. I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
Steps I followed:
1. Ran initialization of beginning balance with 2LIS_03_BX
2. Ran the historical job with 2LIS_03_BF
3. Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
4. Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
Now, to this point, everything was fine. Quantities were as expected. Dollar values were as expected. The problem occurs once I load deltas:
5. Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
Query example:
MATERIALA:
Initial Stock Balance = 1000 EA
Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
Now, I have the record in BW showing the stock issue of 150. However, the non-cumulative key figure within the query still shows 1000. And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance. It is like it is not recognizing the updates.
Any help would be appreciated.
Thanks,
BrentHi!
Here is what helped in my case, very similar to your:
In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values" -
Stock Valuation - Inventory Management Cube
Dear Sap Gurus,
We have implemented the Inventory Management Cube in BW.
Quantities are correct, but we have difference on the stock valuation.
For some material stock value are correct, for some other they are not correct.
A saw a lot of OSS notes and how to on this subject, I am trying to solve this issue using these documents, but based on your experience could you explain me how you solved this issue ????
Thanks,Hi
Did you follow the correct steps?
Initialisation of BX data in the first step.(Loading of Opening Stock)
Then The request in which the opening stock was loaded must always be
compressed with a marker update
Init load of BF And UM in the second step
The request in which the historical material documents were contained
must always be compressed without a marker update and
Successive delta uploads must always be compressed with marker
updates
Check this whether you have done this or not.
Because of missing the steps here also would give you wrong values,
Regards
Ram -
Movement Type in Inventory Management Cube
Hello Guys,
I am new to the area of Invenotry Management. I have seen the How to Guide and blogs by Surendra for Inventory Management scenarios.
One of initial doubt is that the cube 0IC_C03 does not have Movement Type. As per the blog, we can define transaction keys in BW but how do I pull it in my Cube. Is ehnacing the extract strcuture BF the only option? If yes, what logic do we follow to add movement type to BF?
Also as per SAP Note, we cannot enhance BX to include movement type. So would it create a problem if BX does not have a movement type and BF has?
Looking forward to solutions
Thanks n Regards,
AbhishekDear John
The movement type has important control functions in Inventory Management.
For example, the movement type plays an important role in
=> updating of quantity fields
=> updating of stock and consumption accounts
=> determining which fields are displayed during entry of a document in the system
thanks
G. Lakshmipathi -
Problem in installation of Business Content for Solution Manager
Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lotHI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar -
Consignment Stock for Inventory Management
Posting as a new thread...
I have installed and loaded the Inventory Management Cube 0IC_03 in our development and quality systems. During testing we have found just one problem with Consignment Stock. The Stock Initialization (2LIS_03_BX) does not bring in an initial quantity (BWMNG) for any material flagged as a Consignment Stock (Stock Category = K, field BSTTYP).
My question - is there a good reason for this or is this a problem? It causes a problem with reporting, because balances are now off. Do I need to change how reporting is done for Consignment?
It seems to me that the BX extractor should be picking up the initial balance. I am trying to debug the code, but am getting a headache!
Any help would be appreciated!
Yes, I have reviewed the "How To..." documentation, but don't see anything regarding consignment stock.
We are at BW 3.0b Support Pack 25.
Lisa.Thanks, Ken. I don't know that this note actually helped me, but I did another review of OSS notes. We have applied 3 of them (726485, 756151, 762219) and our consignment issue has been resolved.
Thanks for pointing me back in the right direction!
Lisa. -
Cubes on the Materials management Cube 0IC_C03
HI,
We need to create cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
Want to know how will the marker update will work on the new cubes?
Thanks.
NitinHi,
Look this link wll give u full detailes about marker updats and so on....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
***********Asign Points if usefull*******
Cheers,
Satya -
Cubes on Materials management Cube 0IC_C03
HI,
We need to create cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
Want to know how will the marker update will work on the new cubes?
Thanks.
NitinHi,
Dont enter duplicate trds pls close trd if u got solution
Cheers,
Satya -
Need info on BI content for "Hedge Management"
Hii Guys,
Can anybody help me in finding right BI contents for Hedge Management (Transaction banking)?
I can see some hedge related chars and key figures in 0CFM_DELTA_POSITIONS but no records are coming for those fields.
Am i looking at the right data source ?
Regards,
Ashu.
Edited by: Ashu Gupta on Mar 9, 2010 11:27 AMHi Martin,
I have already checked that but I am unable to get the desired information.
Thanks for your help.
Regards,
Ashu. -
Early warning system for inventory management,
Dear Friends,
I had an issue related to early warning system for inventory management, i.e, if the stock goes below the specified level the system should trigger the mail.
Pls. explain how to configure
regards
SureshSolved
-
Unserialized for inventory management?
Hi,
why unserialized update for inventory management, why not direct update and delta queue.
regards
anitha.Hi Anitha,
SAP Inventory Management system allows you to manage stocks on a quantity and value basis in order to plan, enter, check goods movements and carry out physical inventories.
Enables users to manage all the items purchased, manufactured, sold, or kept in stock. Services can also be defined as items, although they are relevant only for sales.
For each item, users enter the data relevant for a particular area in the system. This data is used automatically by the system for purchasing, sales, production, inventory management, and accounting.
Provides optimum support for business processes. Helps create orders, delivery notes, and outgoing invoices, automatically calculating prices, sales units, and gross profit. Enables complete control over stock quantities at all times and lets users analyze the financial aspects of stockholding at the same time. Allows users to control production on the basis of the items that are used for production and on the basis of the finished product and any by-products created.
http://help.sap.com/saphelp_nw70/helpdata/en/f7/64073c52619459e10000000a114084/frameset.htm
with hopes
Raja Singh -
Why do we use Unserialized V3 update for Inventory Management?
Hello Experts,
I have question on LO Cockpit extractor.
Why do we use Unserialized V3 update for Inventory Management (2LIS_03_BF) ?
Are there any reasons behind?
thanks a lot
PadmaHi,
V3 gives you good performance and you use it when the order of data is not important they way it was posted in OLTP, this method is used.
Cheers,
Kedar -
BI content for Solution Manager 4.0
Hi Experts,
I want to install BI content for Solution Manager 4.0 but i don't know what kind of BI content i need and where can i get some information about this.
if somebody knows somthing , please , let me know.
Thank you.There isn't a lot of standard content for Solution Manager. It's mostly alerts, server, module, database and overall system information for the environments connected to that Solution Manager instance. The standard DataSources are:
0SM_DSWPBI_BPM BPM Data (Alert Data)
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400 DB400 Data
0SM_DSWPBI_DBADA Adabas Data
0SM_DSWPBI_DBDB2 DB2 Data
0SM_DSWPBI_DBINF Informix Data
0SM_DSWPBI_DBMSS SQL Server Data
0SM_DSWPBI_DBORA Oracle Data
0SM_DSWPBI_MODUL Module Data
0SM_DSWPBI_PERF Performance Data
0SM_DSWPBI_SERVER Server Data
0SM_DSWPBI_SYSDATA System Details Data
0SM_DSWPBI_SYSTEM System Data
There are several InfoCubes, one for each DataSource in the standard content. These InfoCubes are then unioned in a standard content MultiProvider. -
CRM Content for Solution Manager
Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
Please help.
Kind Regards
Felix>
felix chabeli wrote:
> Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
>
> I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
Do you want to implement CRM 7.0 with the help (project, Business Blueprint, Configuration) of a SAP Solution Manager system?
If yes, you can browse through the [Available implementation content|https://implementationcontent.sap.com/bpr]
The content is shipped via add-on ST-PI and its support packages.
Relevant transactions: SOLAR_PROJECT_ADMIN, SOLAR01, SOLAR02
Regards,
Ruediger
Maybe you are looking for
-
Why does GarageBand audio work for guest user but not my account?
Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage. About a month or two ago I tried to download the ne
-
Garageband 11 will not open in Mac os 10.7.5
I've just re-installed Ilife 11 on my Mac pro. Movie and Photo work but Garageband doesn't. When I launch Garageband it has a large screen open with a bunch of programming language. It mentions celemony, propellerhead, which are not installed on t
-
Call method execute of the application Java mapping
Hi, I'm using a RFC Lookup in a Java Mapping. In PI 7.0 it was working fine. Now we use the Mapping in our PI 7.30 Testsystem and I get following LookupException: Error when calling an adapter by using the communication channel CC_Receiver_RFC_XXXXX
-
MacBook Pro lagging Flash/Powerbook G4 kernel panic attack
Works great on my PC, but this is ridiculous. Youtube lags so hard and Im not able to post comments on videos. Powerbook G4 gave me a kernel panic attack, which was the first EVER I had on that 4.5 yr old computer.
-
Can I save a list in Reminders?
Can I save a list in Reminders to use again, e.g. a packing check list?