Missing Controllers & Drivers
Hi all. My HP Pavilion g6 crashed a while ago and had to format it. Uploaded Windows 7 Ultimate. Now my laptop is missing drivers & controllers. I suspect these d & c's were factory installed as i didnt recieve any recovery disc when i purchased the laptop. My laptop is currently running on a 32-bit Operating system.....Is this the right system.
Missing drivers & controllers.......
SM Bus Controller
ID: PCI\VEN_1022&DEV_780B&SUBSYS_3567103C&REV_13\3&2411E6FE&1&A0
Error code: 28
PCI Device
ID: PCI\VEN_10EC&DV_5209&SUBSYS_3567103C&REV_01
Error code: 28
Ethernet Controller
ID: PCI\VEN_10EC&DEV_8136&SUBSYS_3567103C&REV_05\4&1C5FEC99&0&0028
Error code: 28
Laptop also says that there is a problem with PnP devices
Please can someone HELP me with these isues or direct me to where i can get the recovery disc for the make and moddel laptop
This question was solved.
View Solution.
Hi:
For the first one you need the AMD chipset driver at the link below. First download listed.
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#2
The next one is the realtek card reader driver you need.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-839...
The next one is the wired network controller. Download and install the 5th one on the list (auto install).
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Paul
Similar Messages
-
HP 2000-2d19WM Missing Many Drivers!
Hello all:
I have an HP 2000-2d19WM Notebook PC running W7 Professional, and it is missing many drivers! These drivers include:
- Ethernet Controller
- Network Controller
- PCI Device
- SM Bus Controller
I went to the driver section of this website for this specific notebook and it didn't support any of the drivers due to the fact that I am running W7. Any help at all would be GREATLY appreciated. Thank you!
This question was solved.
View Solution.Hi,
Install:
Realtek PCIe GBE Family Controller Series Drivers (Win7 and Server 2008 R2 Auto Installation Program)
Qualcomm Atheros AR9000 Series Wireless LAN
Card Reader Controllers - Realtek (Card reader driver for XP,Vista,Win7,Win8,Win8.1)
http://support.amd.com/en-us/download/chipset?os=Windows+8.1+-+64 -
Leopard Drop in CPU missing Windows Drivers
Hi there,
I have a Leopard Drop-in DVD that was posted out to me after I bought my MacbookPro 17" with Tiger (in the eligible time period) a couple of years ago now.
Thing is, when I try to do the whole Windows thing, Boot Camp runs and partitions, etc. and I can install Vista, but when I put in my DVD into Windows (Vista) to install drivers, nothing happens!
Through some rudimentary research, I've discovered that the diskimage.dmg file in my bootcamp contents is missing.
How can I fix this? Anybody have any ideas? I tried to download the update - but Vista says (predictably enough) that the update requires previous software, which obviously isn't installed!*Hi rcar, Welcome* to Apple's Users Help Users Forums.
IMHO be thankful it came w Tiger. Use a partitioned FWHD and put one OS on a partition w the other OS on the Internal HD. The other partition should be rather large for Time Machine. You might consider more partitions for Bootable BUs. TM is not bootable.
Good Luck, JP -
Loaded runtime but missing visa drivers?
I created an executeable on one pc and loaded it onto another with just the runtime engine installed. Now the serial visa's will not work so I am assuming I am missing some visa drivers. What would the best way to get these loaded, if in fact that is the issue? The PC is no longer in my possession so I would have to do this by sending files and have the operator manually load them.
I have another PC at the location that does have the drivers. Is there anyway to copy and paste the required folders or do I need to use an installer?
Thanks in advance.
LV 8.2.1
Solved!
Go to Solution.CTBK,
You need to install the NI-VISA Runtime Engine on the target machine. Make sure to install the same version as the NI-VISA installed on your development machine.
P.S. Best way to handle this is to create an installer that installs the .exe, LV Runtime Engine, NI-VISA Runtime Engine and any other supporting software.
Message Edited by centerbolt on 03-03-2009 10:00 AM -
I just jumped through the myriad of hoops required to install
ColdFusion MX7 on a Intel Mac OS 10.4. I am running CFMX 7 on a
multiserver J2EE configuration with JRun4 on Apache 1.3.33.
Cold Fusion is otherwise running correctly, but when I
attempt to add a Datasource, I find that the Microsoft Access and
Microsoft Access with Unicode drivers are missing. I believe that
in my configuration, these drivers should be loaded from:
JRun4/servers/cfusion/cfusion-ear/cfusion-war/WEB-INF/cfusion/lib/macromedia_drivers.jar
This problem has been duplicated on another Mac with similar
configuration. Any idea how I can get the MS Access drivers to
load?Hi Henry,
Thank you for your response.
I have attached screenshots below illustrating my issue. As you can see, the only drivers it shows available is JDBC. This is the case when either 'Local Middleware' or 'Server Middleware' is selected.
Kind regards
Gary -
Missing itune drivers for burning and importing!
I keep getting the message "itune drivers for importing and burning cd & dvd missing". I have reinstalled itunes, but still getting same message. I want to burn cd's, how can I do this?
I've just joined this unfortunate universe. Does this mean that anyone who runs Windows Vista and iTunes now has registry settings conflict, and no longer can burn CD's from iTunes? When I checked with Dell technical support for help on this, the only way they could restore my ability to read CD's in the CD drive was to delete iTunes upper and lower filter settings from the registry. And now, it seems like all in this universe, I've lost ability to burn CD's. As asked above, is this for EVERYONE running Windows & iTunes?
-
Hi,
I've re-installed my R61 (8918-5QG) with Windows 7 Ultimate x64. Everything's fine but drivers are missing for two (?) devices.
They are:
PCI Bus 21, devices 0, function 3
PCI Bus 21, devices 0, function 4
Do you know which drivers I have to download? Is there a way to get a way to identify those devices?
Thanks a lot.
Solved!
Go to Solution.Scroll to the last portion of this thread, and check the HP driver mentioned...worked on my Z61m which has the same card reader as your machine...
http://forums.lenovo.com/t5/Legacy-ThinkPads-Z60-61-G40-41-A/Need-quot-Mass-Storage-Controller-quot-...
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
After "make oldconfig" missing many drivers
I´m building kernel packages this way: I take the pkgbuild from 2.6.14 and change it to version 2.6.15RC5. I copy the config from the old kernel into the folder for the new package. Then I start the build. When the new sources are unpacked I break it and cd to src/linux2614. There I remove all the config and .config files.
Then I copy the old config file there and run "make oldconfig". Only a few changes to make. But after that the size of the config drops from 49KB to 25kb and when I do a diff I see lots of drivers missing and many are changed from "y" or "m" to "n".
Do I something wrong and what way use our kernel maintainers :?:
AndyRTRtomk wrote:
In the official PKGBUILD, change this line:
yes "" | make config
to
make oldconfig || return 1
When you run makepkg now, it will go automatically into oldconfig, and continue the build when you're finished.
enabling make oldconfig in the PKGBUILD file doesn't seem to give me chance to move my old .config file to the source directory. I achieved the same by ctrl-z to pause makepkg and then copying the my .config flie to the appropriate directory. Surely there is an easier way to configure with an old .config and makepkg. This whole process seems a lot more complicted than using the old /usr/src method. There it is just a question of
make old_config
make && make modules_install
Coulnd't be easier. -
K8N Neo2 Platinum Missing Mobo Drivers CD
Hi! Yesterday, I just bought, that mobo with Athlon3000+ Venice E6 stepping. Evereything is O.K and runs smooth , but somehow... the original CD, including the mobo drivers, is missing .
I'll be very thankful, if you are able to make for me an .ICO copy of the CD and uploud somewhere
ThanksQuote from: Richard on 16-December-05, 00:29:42
The CD from MSI makes a great coaster to put an ice cold drink on, but I would not use it for anything else.
LOL!
It's not even good for that.... The center hole allows condensation to pool up underneath.
I've come to realize that the included driver CD is just a "one time" use item at best anyway, as most of the drivers are already several months old.
And heaven forbid that one would actually want Core Center & Live Update - unless you're a hardcore masochist or something. -
Missing printer drivers - can't add new drivers
I printed without any problems yesterday. Last night, I applied the latest drivers via Software Update (a lengthy list that just came out within the last week, including 10.4.8) and now all my printer drivers are gone. I have 2 printers connected directly to the mac via USB, and one printer connected through the network. I have attempted to add the printers again, using newly download printer drivers from both Epson (for my R300) and from Primera (for my disc_publisher). When I attempt to add a printer, this error comes up: "An error occurred while trying to add the selected printer. server-error-service-unavailable"
I have a G5 dual 2 GHz. I have attempted all the normal troubleshooting techniques (permissions, unplug power and usb, deleting drivers and re-installing, restarting mac, etc), but am now at a loss.
Any ideas?
Thanks,
Scott
PowerMac G5 Mac OS X (10.4.7)
PowerMac G5 Mac OS X (10.3.9)Have you tried resetting the print system? Open up Utilities->Printer Setup Utility and under the Printer Setup Utility menu, select Reset Printing System. You'll have to add all your printers again, but that should clear up most problems. Give it a whirl and post back.
Good luck!
MacBook,G5 iMac,15PB,G4 iMac, G4 QS, AX, 3G iPod, Shffl, nano,shffl Mac OS X (10.4.7) -
I'm trying to add a HP printer under Bonjour via Printer Setup Utility. I can do that with my new MacBook and have plenty of choices of printer drivers. With an older PowerBook, I only get a few driver choices (HP not included).
I've tried downloading drivers from the HP website and Printer Setup Utility doesn't recognize them. Can I simply copy the drivers over from my MacBook? Where are they stored?Can you give us a little more detail - where is the printer connected? What model printer?
-
Missing WinXP drivers for Satellite A300/A305
I bought a satellite a305-s6829 in US. I changed the OS to XP.
My problems re the following:
1) i have 3 devices that remain unknown and Toshiba USA has published incomplete XP drivers for this model.
I don't know which hardware are not functioning and have no idea how to identify them. At first I installed a program that's supposed to identify these unknown devices but it lists all the hardware in the laptop! So how am I supposed to know which ones are unknown.
The device list is long and it is kind of difficult to isolate the unknown devices.
2) I am unable to find the ACPI Common modules for Win XP for this model. Is there a compatible ACPI module for the A300/A305 from other models?
I am unable to install the other important utilities for the laptop since I don't have this, e.g. power management.
3) Ever since installing XP, I am experiencing BSOD.
I am not sure what's causing it. Maybe it is related to no. 2, i don't know. Has anyone else experienced this?
Can somebody help me with these issues?
Thanks
-yazunuri-I had as of sept 12/2008 the same problem with a satellite A305, spent weeks finding drivers for XP, thought I had them all and installed the OS from 0, Everything worked great... at least I thought so. Then I noticed no "fn" keys working for turning down the brightness of the screen and preventing the system from draining the batteries, so looked for hours for the solution. Downloaded through the support page:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
The drivers you are supposed to download for Windows XP are: common module, hotkey and zooming utility. Be careful there are two versions of hotkey available. Only one works so just try them, now I have amore decent way to switch between monitors, and controlling the brightness. When you turn off brightness goes back to the highest.... but it works, I can even suspend or hibernate my system.
I don't know why Toshiba keeps telling people that my system had not such a driver for win XP, the truth is, it is not the best but works, and besides all the "conspiracy" of laptop manufacturers pushing us into Vista and us trying to resist, we have to fight in order to keep alive XP waiting for the final successor of XP to be born. I am a Microsoft fan but... no comments about Vista anymore, just switch to XP and enjoy having your system ready (full of applications) in only 1 minute and 40 seconds, hibernate it in 20, have it back and ready in 35, and the list of fast speeds of XP goes on and on.... hope you can solve the problem is just a matter of time to spend in front of your laptop.
IT CAN BE DONE, do not ask TOSHIBA, they'll tell you cant. -
ThinkPad X240 missing WLAN drivers on Windows 7 64bit Enterprise
Hi,
I got first X240 to our company. I have had serious problems to install drivers into operating system. All Windows updates are up to date, thinkvantage system update has been run numerous times. Unfortunately, I had to install all thinkvantage programs manually as well as drivers. Now there is one particular unknown device listed in device manager. I have downloaded and installed the right Thinpad wlan driver from the drivers section for x240. I have still problems to get wlan controller identified by Windows 7. I have also tried to install those drivers manually. I am starting to wonder that there is something wrong with the drivers or the hardware itself. I have installed around 450+ Lenovo Thinkpads during my career. Any suggestions? Is there known issue with the x240 wlan controller driver?
Thanks in advance.
Solved!
Go to Solution.Hi Supre5,
Apologizing for the inconvenience caused. Could you please try installing this Intel Wireless LAN driver?
Else, try running Intel Driver update utility which auto detects the relevant drivers for your system and install it.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Hi, I just installed Win7 64 Pro - very happy with the machine, it's all crisp and light.
My device maneger reports a missing driver for PCI Device. I can't tell what's missing exactly, the laptop works fine.
I noticed the chipset driver was missing for Win7. For win8.1 it was an Intel driver (?!?, The laptop is an AMD A8).
Was wondering if you can pitch in some info about what is missing and how do I install it.
Thanks
This question was solved.
View Solution.Hi:
You need this chipset driver for your model. Install and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
You need this driver for the PCI dev. DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT... -
I'm installing Labview 7.1 on a new PC. It's asking me to insert the disk labelled "National Instruments Device Drivers - May 2004 Disk 2". I seem to have lost this disk. Is it possible to download it or get a replacement disk?
Yup, Go here http://digital.ni.com/softlib.nsf/MainPage?ReadForm&node=132010_US and you will find all the NI drivers. (Just click cancel on the install drivers popup and install them after the installation is done.)
Brian
Message Edited by BrianPack on 04-20-2006 12:06 PM
Maybe you are looking for
-
Hi, just bought a new windows 8 laptop. Managed to install iTunes 11 with difficulty. iPhone 5 shows in itunes and im trying to copy a new ringtone over. However its not allowing me! I have authorised the computer and itunes match is off on phone and
-
Can you use Contribute CS4 behind a ISA Proxy?
-
How To View An Item When Publish Date Is Set Greater Than Current Date
Using Oracle Portal Version: 10.1.2.0.2 (Build: 139). The customer(content manager) uploads a document into the portal on 28-JUL-2006 07:08 AM. The publish date is change to 1-AUG-2006 00:01 AM. There is a portal user group needing to review the docu
-
Hi friends, I am using oracle Report 6i and Oracle DB 10g. Windows for (my pc) development and linux for the OAS I need to show some numbers in barcode 'format' in web. I have a table with a column named Code (number type), I need to show this number
-
802.1x and Authentication Methods
Hi, I have ACS 5.2, Cisco 4507 switches and AD domain environment. Planning on performing only machine authentication and not user authentication. I have the following type of devices: 1. Windows XP SP3 and higher on the AD Domain 2. Devices to be wi