Missing Cursor problem in Pages still exists

Beginning with page 97 of a document you cannot place the cursor at the bottom of the document anymore.
There already is an archived discusion on it but I don't find any further hints whether it is now a bug accepted by Apple:
https://discussions.apple.com/thread/2695065?start=0&tstart=0
I can reproduce this problem with all my books written with pages and without any import from other software. And I hope to continue to write books with Pages so I desperately hope that this will be fixed soon.
Is there any further hint available?
Thanksalot

Again, thank you for the quick answers. Of course there are several work arounds possible. As speed is crucial to me writing books and as I layout them including a lot graphics right from the beginning I would have to change my way of working just because of a bug. And, isn't it is a Mac and not a PC? The bug is older than 18 months - that is not very promising. From our development of the CONSIDEO MODELER we are used to fix any bugs within 3 months. What is promising, is that the documents can be edited with no problems on the iPad. However, as the iCloud for the exchange of iWorks documents between OS X and iOS is still a bad joke I am not satisfied. Maybe Apple can improve both, the iCloud functionality and Pages.
Fingers crossed

Similar Messages

Every once in a while when I open my mail or a page I get nothing but strange lines of symbols. Many of the symbols are black triangles with question marks in the center. I completely reset it like new, but problem still exists

Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center. I have reset the ipad2 to new condition but the problem still exists.

A reset does not make tthe iPad "like new."
First, let's ensure that we agree on just what is a Reset...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted. I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists. Any idea what is going on?

When I use Preview,Photo Mechanic and Pages, all JPEG or RAW images appear corrupted.
I thought my hard drive was failing and replaced it and migrated everything over but the problem still exists.
It felt as if maybe a virus was at work but I ran Sophos and found nothing.
I store images on my Drobo Raid system but when I work from my Macbook Pro I have no issues, just on the tower.
Any idea what is going on?

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

Wifi problems still exists?

I sold my gs60 that had an 870m back in january mainly because i couldnt bare the wifi problem. I really loved the laptop and everything about it but everytime my laptop overheated the wifi would drop from 100mb to 1mb or less at times, monday im thinking of buying a new msi laptop and im wondering if these models that are currently being sold on amazon and etc still have the wifi problem or has it been fixed?
And trust me, i read the forums, i read the guides and im pretty decent with computers/software and etc, i uninstalled, reinstalled, updated it, changes adv. settings and even though it improves certain things the problem was still there. So does it still exist?
Or should i just buy a USB wifi?

This problem only occurs in earlier patches of Intel WiFi card of GS60 2Px (8xx series of NVIDIA graphic cards) and not every unit was affected.
If you don't want to take this risk, I'll suggest you buy GS60 2Qx (9xx series of NVIDIA graphic cards).
USB WiFi is a good idea. It certainly has a better signal comparing to the WiFi embedded in the body of the laptop.

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

Macbook pro 13" late 2011 stuck up at apple logo and spinning wheel, changed HDD problem still exists

i have a macbook pro 13' late 2011 unit and its not starting up, found out that the HDD was defective, but when i changed the HDD the problem still exists, what may be the problem?
thanks

Have you tried booting into the Recovery HD and running Disk Utility and checking to see if the HD needs repairs?
Restart holding Command + r and at the recovery screen select Disk Utility. Then select Macintosh HD and click on 'repair disk'. If anything gets altered click on repair disk again until you get a clean pass. Restart as normal from the Apple menu. More info here about the Recovery HD:
http://support.apple.com/kb/HT4718

My firefox crashed when upload file on our web based application. This happen on two PC, even during firefox safe mode the problem still exist. But the problem

Dear All,
My firefox (version 23 on win 7) crashed when upload file on our internal web based application. This happen on two PC, even in firefox safe mode the problem still exist. So, my first conclusion the problem nothing to do with extension. here the crash ID https://crash-stats.mozilla.com/report/index/81220865-36c0-4e10-a484-6d27e2131023 and https://crash-stats.mozilla.com/report/index/86d2b779-9730-4d2c-b276-a86d42131023. I wonder if this happen because jquery modul in our web based application. But when I tried on my laptop, the problem dissapear. I tried to replicate same situation on different server, I mean I put the exact same application source to other server, never meet the same problem. Thus, I suspect may be it related to antivirus that installed in our network which is kaspersky. I am googling, never meet the clue.
If you meet the same problem, please help me.
I am so sorry for my poor english.
Him Him

The crashes are a problem with the winhadnt.dll file (OCular Agent from TEC Solutions Limited) as you can see in the crash reports.
*http://www.freefixer.com/library/file/winhadnt.dll-52397/

HT1926 i've tried so many times but the problem still exists! please help!!

i've tried so many times but the problem still exists! please help!!

Could you describe what your problem is, please?

My entire iTunes library is missing on my two non-Apple computers. My libraries still exist on my iPad and iPhone though. I tried deauthorizing and then reauthorizing my devices, uninstalling and then reinstalling iTunes and nothing works. What happened?

My entire iTunes library is missing on my two non-Apple computers. My libraries still exist on my iPad and iPhone though. I tried deauthorizing and then reauthorizing my devices, uninstalling and then reinstalling iTunes and nothing works. What happened?

See Empty/corrupt iTunes library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2

Tracking MIG problem - page doesnt exist

Hi Experts
Please I need a help with the tracking MIG
Iu2019m using the tracking ## to count the clicks in a link inside a campaign e-mail.
My problem is that the link generated by SAP doesnu2019t work in some sites like www.google.com
The google link sent by campaign with ## is followed by a MIG identification
http://www.google.com/?MIG=4A09ADC8A79F3109E10000000AB60A3F&URLGUID=49E4FF14B18C1894E10000000AB60A3F
When I try to access the link display the page doesnu2019t exists.
What can I do?

I'm tracking by intermediate site and i expect that the MIG paramiter doesnt get passed to final URL, because some sites doesnt accept this "code" and show the mensage page cannot be displayed (www.google.com for example).
What can i do to this MIG doesnt pass to the final URL?
Thanks

Keep getting error message "user name or password for aol is incorrect". I have reset both username and password and still can't get my mail. This problem only seems to exist in the evening.

Keep getting error message "user name or password for aol is incorrect
". Have reset both and problem still exists. Problem appears to be in the evening hours only.

reset the password to re confirm that that isn't the issue

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution

Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips.

For some reason I cannot sign into iMessage. It keeps saying my password is incorrect. I have changed it twice and the problem still exists. What do I do?

I cannot sign into iMessage. It keeps asking for my password but when I do it says it is an incorrect password. I have changed my password twice and the same problem still exists. This also is happening on iCloud. What do I do?

Have you tried going through the steps in this support article?
iOS: Troubleshooting Messages - Apple Support

I have not been able to access itunes store for over a week now. I keep getting error -1202. I have updated to latest version of itunes but problem still exists. Any tips?

I have not been able to access itunes store for over a week now. I keep getting error -1202. I have updated to latest version of itunes but problem still exists. Any tips?

See this one
https://discussions.apple.com/thread/3742260?start=0&tstart=0

Missing Cursor problem in Pages still exists

Similar Messages

Maybe you are looking for