Missing DAQmx folder in vi.lib

I tried installing LabVIEW 8.2.1 and its requested device driver disks on a computer without any DAQmx device, and no DAQmx folder is placed inside vi.lib.
As a result, one of my LabVIEW programs won't compile. Is there a way to trick the installer into putting the DAQmx folder into vi.lib even though there is no DAQ device there? Simply copying the DAQmx folder from another computer doesn't work.

There is no requirement to have hardware installed. I have no DAQ devices on this pc and and DAQmx installed just fine. I've done the install on many computers without any hardware. Was this a fresh install and what OS are you using? Does MAX indicate that DAQmx is installed? If it does and it's listed in the National Instruments section of Add/Remove programs, try doing a repair first and if that does not work, uninstall and do the DAQmx install again.

Similar Messages

Missing vision folder in vi.lib

Hi everyone,
I'm still very new to Labview and here is the problem I'm dealing with:
I'm using a labview code that requires the folder "vision" in the "vi.lib" folder. I think I need to install a specific driver called "IMAQ vision" in order to get this folder but I'm not entirely sure. Plus I'm not sure which IMAQ driver needs to be installed and if they only work with a specific hardware PCI or else...
My current configuration is Labview 2014 64 bit; Windows 7 64bit; no specific card (PXI?) is installed...
I'm a bit lost as you can see and would appreciate any help!!
Many thanks,
Renaud

Hi Renaud,
The following link will tell you what driver you need to install:
http://digital.ni.com/public.nsf/allkb/DB928F6D5E9D6B97862579A7006B2850
For example if you are using a LabVIEW version of 2011 and newer please install these drivers:
http://www.ni.com/download/ni-vision-acquisition-software-august-2014-f1/4974/en/
Otherwise use the first link to identify the driver version and find the supported drivers here:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/ps/30/sn/catnav:du,n8:13.79.782...
After doing that you will have to restart your computer for them to take effect
Please let me know if this is what you were looking for.
Regards,
Art
Applications Engineer
National Instruments

IOS Simulator build: SDK is missing GPL component X:\sdk_path\lib\aot/bin/as/as-386.exe

Trying to build a simulator build with air 16 or 17 and iPhoneSimulator8.2.sdk I get the following error:
SDK is missing GPL component X:\sdk_path\lib\aot/bin/as/as-386.exe
igmake: *** [../bin/project.ipa] Error 16
igmake: Leaving directory `X:/project/'
I've checked various sdk versions. Some of them have an "as-386" file, but never a "as-386.exe" file. I tried just renaming the file (hoping for the best) but that results in this error:
ld: in `)Ωtm♣Z, unsupported address encoding (08) of personality function in CIE
for architecture i386
Compilation failed while executing : ld64
igmake: *** [../bin/project.ipa] Error 12
Any help would be appreciated!
Ken

Thanks,
Yes I know that.
But what I was expecting was that things which worked in AIR 3.3 beta 3 would continue to work. As in this link http://blogs.adobe.com/airodynamics/2012/05/18/using-platformsdk-for-ios-on-windows/
In fact the Release notes that you point to state:
Platform SDK support for iOS on Windows
Now, a developer can copy the iOS SDK folder on a Windows® machine and use the platformsdk option of adt on Windows® too.
adt –package –target (ipa-app-store|ipa-ad-hoc|ipa-debug|ipa-debug-interpreter|ipa-test|ipa-test-interpreter) -platformsdk
This feature is not yet available in Flash Builder. The SDK should be copied properly, i.e. the symbolic links in the iOS SDK should be converted to actual files on Windows® , else, packaging will fail.
C

Strange issue when adding a folder to my libs

Hi guys
I have my classes in a libs folder, and in Actionscript Settings / Source I point to that folder. It works fine.
I just attempted to add the AlivePDF source files (using source instead of swc as I want to alter something) in their org folder to the libs folder, and now one of my other classes throws this error:
5001: The name of package 'doit.ui.controls.doitClass' does not reflect the location of this file. Please change the package definition's name inside this file, or move the file.
doitClass was working fine before.
Any idea why adding an exclusive folder would affect other classes?
Cheers

The class that's not working wasn't moved - it's another set of classes in a folder that I dropped into my libs that are causing the first class to not work.
Thanks Ned - I'll work around it another way.

Missing email folder icon on BBT 9800 - Where did it go and how to return it back?

Missing email folder icon on BBT 9800 - Where did it go?
The email icon on my BB Torch 9800 just disappeared. If I type email in the search button it shows me the greyed out email icon but I can't get the icon back on to my homescreen. How do I get my email icon back? And Unhide All is not an option so icant find it.
Please consider the above on urgent basis as I can't see my work mails.
Thanks,

Hi hegazysource and welcome to the BlackBerry Support Community Forums!
Are you using the BlackBerry® Internet Service or BlackBerry® Enterprise Server to receive your email on your device?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

New Hardware / DAQmx Install, LabView 7.1 Now Missing DAQmx VI's?

Hello -
I've been running Labview 7.1 and some applications we've built with it for some time now. Due to an old DAQ board failure, we had to upgrade. Upon receiving the new (PCI-6225M) DAQ board, we had to update DAQmx (to 8.9.5) in order for this new board to be supported.
In doing so, it appears that the DAQmx VI's I had for Labview 7.1 were actually removed from the system. When I try to load my 7.1 applications, I get errors saying that it can't find various DAQmx VI's (like the DAQmx Create Task and Read VI's). Since it allows me to browse for them, I browse to the directory structures that *do* have them now (intended for LV 8.2+, which we don't have). If I select these VI's they seem to be found okay, but then I get an error for each VI saying that it's only for a newer version of LabView, not v7.1.
So what gives? What can I do? Why on earth would a newer DAQmx installer actually go in and remove already existing files from my previous install that previously worked fine? I am not impressed. What should have been a simple board upgrade now appears to be setting us back some significant time.
Thanks,
Brett

Hi Dennis,
I also have common issue. I am using labview 7.1 with DAQmx version 8.8. Recently, I just bought the cDAQ-9178, which requires me to upgrade my DAQmx to version 9.4. After installation completed, I discovered all my DAQmx missing. My question is:
1. Do you have any patch to let me stay @ LV version 7.1 with the new DAQmx 9.5 without missing DAQmx vis? I need the new DAQmx to be able to connect with cDAQ-9178.
Thanks you for your time, Dylan

.Exe Missing DAQmx subVIs

Hello everyone,
I built an installer for my .exe. I included:
1. NI LabVIEW Run-Time Engine 2012 SP1
2. NI-DAQmx Core Runtime 9.6.2
3. NI-DAQmx MAX Configuration Support 9.6.2
The computer I made the VI is a Windows XP machine. The computer I want to run the installer on is a freshly-installed Windows 7 machine. When I attempt to run the installer, I get the following error:
Missing subVI DAQmx Create Task.vi... missing subVI DAQmx Create Channel (TEDS-A1-Voltage-Basic).vi... Missing Timing (Sample Clock).vi... Missing Control Task.vi... Missing Clear Task.vi... Missing Stop Task.vi... Missing external function nilvaiu.*AQReadNChanNSamp1DWfm:C...
It looks like I'm missing DAQmx VI's, yet I included DAQmx in the installer.
Thank you.
Solved!
Go to Solution.

I know these sound like a no-brainer questions but, did you run set-up.exe from <Directory>volume? Can you open MAX on the target machine? If so what software components are listed? Did you reboot to finish installation?
My 8-Ball is screaming that this is a simple error that will involve a <face palm> moment.
Spoiler (Highlight to read)
I've had my share of them too.......
I've had my share of them too.......
Jeff

I have NI DAQmx 14.5 and running LV 2014, i am trying load some old project and i get the error of missing DAQmx Write VI

I have NI DAQmx 14.5 and running LV 2014, i am trying load some old project and i get the error of missing DAQmx Write VI

Can you attach an image of the error display? Did you install DAQmx after installing LabVIEW? Do you have the DAQmx palette?

Missing DAQmx

Hi,
I am new to DAQmx. I am LabView 8.6. I am missing all DAQmx components. Like, when I created new VI,
Functions->Measurement I/O->..
There is nothing related to DAQmx...I do not have the DAQmx examples either...
C:/program files/natioal instruments/labview 8.6/vi.lib . I could not find anything related to DAQ either.
Should I updated the driver for DAQmx? Where should I find it? How could I find whether and which version DAQmx had been installed? Thanks.
Solved!
Go to Solution.

Download and install this
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Missing draft folder in mac mail

My draft folders in my mac mail seem to have disappeared. I have three email accounts and they all are missing. How do I find them?

If there is nothing in a draft folder, it is not present.
If there was something in the folders, Time Machine would have a copy.
Barry

Missing System Folder in Classic

I really need some help here
Purchased an I BOOK G4 notebook .. mostly as a back up for some graphic programs.
It is running a clean copy of OS X version 10.4.11
Classic is missing the system folder and as a result i cant seem to install anything???
Do not have any OS disks with the machine
What are my options??

Hello, and welcome to Apple Discussions!
You will need a source for a valid and installable OS 9.2.2 system for use
as Classic before you can install and use any pre-OS X applications...
And you really need to have an OS X (tiger 10.4) retail or correct install
disc set to support and maintain the system, and its license in the iBook.
The computer model shipped with a machine specific series of install-restore
discs and the OS 9.2.2 Classic would have been on one of them; usually not
the main disc, that has OS X installers on it. Since that computer did not boot
OS 9.2.2, the installer would be specific to the computer; about the only way
to get an OS 9 from an optional OS X install disc, if you have software but no
computer, the OS X has to see and recognize an appropriate installer, though.
Since OS X is primary and OS 9 does not boot an iBook G4, you have to find
a way to install OS 9.2.2 by drag and drop; or get ahold of a correct original
install-restore disc set for that computer from some online source. There is a
small chance that someone may have the right one for your build model iBook
Used to be, you could call Apple sales support at 1-800-MY-APPLE and ask to
speak to a product specialist about replacement original discs for the iBook G4
and provide them with the product's serial number, and order a new replacement
set of install discs, for a reasonable fee. The correct Apple Hardware Test is on
those discs, so that was the best deal going. The original software could have
been a version of Panther 10.3.9, and if the computer CPU was faster than
800MHz it would not dual boot OS 9 and OS X. This is where details matter.
You may be able to identify your iBook by serial number by using the search
link in everymac.com, to help find which iBook G4 model it really is, and then
know more about upgrading it, getting replacement or upgrade software, and
other important facts. Such as what Apple Hardware Test was in original s/w.
Any other OS 9.1 or 9.2(.1) install disc would not work, since they either would
be for some other computer and made to install when booted (C key held on start)
or, would be too old for the direct install method to work, it won't under OS X if
not the correct disc set for the computer.
You may be able to find a way to install an OS 9.1 or OS 9.2 on an external HDD
or flash USB drive, and update it to OS 9.2.2 using download update files, and
then copy (drag/drop) it into an iBook G4, for use as non-boot Classic 9.
On a trial basis and to test some hardware, I was able to use a newer iBook G4
second install disc which contained an OS 9.2.2 install, and use it as Classic in
a different computer running OS X, by use of Pacifist utility. This takes a packet
of data out of the disc and then installs it from the desktop, directly. It can work.
But there are so many variables some of the things that Could Work, may Not.
Some suggest you may be able to make a copy of a working OS 9.2.2 system
folder and an Applications 9 folder from a working computer and use them as
Classic in some other OS X PPC model of Mac that does not boot OS 9.2.2.
You may be able to use a USB flash drive to copy an OS 9.2 system and its
applications (9) folder. You may even be able to test it as a working idea,
while it still is on the USB memory drive; by pointing the Classic preference
panel (in System Preferences) to look for a Classic system there. Or drag
and drop it into the computer. The good about old OS 9.2 & before, is the
simple way to move a system around; and OS X won't allow that method.
And of course, OS X 10.5 Leopard can't use an OS 9.2.2 Classic.
The original install disc set would be the best bet. Is there any chance the seller
may have misplaced the software set belonging to the computer you bought?
These are considered a part number of the computer, as such, part of the sale.
If bought from a company who fixes and resells computers, do they offer any
optional software for an additional fee? The discs should be included, but in
several instances, people buy a computer second-hand and have no software.
You may have to contact resellers and maybe even auction sites, once you can
identify the exact set of software you need; companies such as welovemacs or
others you can search for may have something; most are overpriced, to me.
The ebay auction tales are enough to scare me into keeping the original discs
and include them when I forward the computer to some other future user.
I have not bought any replacement software online, and OS 9.2.2 installers for
a specific OS X running computer, to be used as Classic, narrow the field; since
the OS 9 system installer on iBook disc media is often made for that model.
Well, I have ideas. And they seem to work better for me in person than when
I've told some persons about them online. Just as well, if there's some glitch
you can avoid by finding the correct discs (in the land of plenty) that's good.
To *search " OS 9.2.2 install CD " in google* may bring up some choices,
but I have no experience with retail resellers of old or used software.
In a few cases, if you get very good at identifying iBook G4s, you may
be able to find a broken one exactly like yours with the original software.
These should be relatively inexpensive; but have very limited use discs.
Hope this may help, somewhat...
Good luck & happy computing!
+PS: I think I need a little more coffee!+

Missing flex folder in the FDS

Hi,
In the FDS2 installation am unable to find the flex folder. I
am reinstalling the fds2. In the first installation flex folder was
there but not in the second installation.
Thanks
Sun

hi
I installed Flex Data Service . When i look into the
directory structure FDS, Flex directory is missing. with out flex
directory its hard to create j2ee applications using flex..
Sun

Missing Movies Folder in Sidebar

When opening a Finder window, one of my sidebar folders is missing. I have the Applications, Documents, Pictures, Music and User folders, but the Movies folder is nowhere to be seen. I tried searching for it in Spotlight and got nothing. Because of this, I have no Movies directory to save my iMovie projects in. How can I take care of this problem?

The special icon is automatically given by the Finder to a folder named Movies that resides in the users home folder, and automagically gives it the cool custom icon in the Sidebar when it is dragged there. People have been known to mess this up by pasting an icon on the folder themselves. Sometimes a restart of the Finder or the computer may be necessary to get the custom icon to display. There are a number of folders that the Finder treats this way in the home folder.
Francine
Francine
Schwieder

Missing file folder in LR2.7 -- how to locate

After a crashed and replaced hard drive, many catalogs no longer refer to a file or folder at its correct location. Clicking on the "?" in the library modcule and then the "find missing folder or file", only leads me to the message that the file already exists. How can I find it to re-establish the link?

What you want to do is click on the folder instead of the image.
In the left hand menu, click on the top most folder (left most if more than one) and you should get an option to reconnect or find missing folder.
Browse to the new location and select.
If you click on the top most, it will reconnect everything below it.
A number of us use only one top most folder for this reason; it helps when moving images around or something.
Cheers!

Missing webapps folder in UCCX

Hi All,
Webapps folder is missing in this path C:\ProgramFiles\wfavvid\tomcat_appadmin\ and I am not able to login to the appadmin webpage.
Please suggest what needs to be done.
UCCX version is 7
Thanks
Bhavna

I think you need to login to appadmin page
so you can let it as fresh install with the following steps
on the server through cmd prompt - type in CET - bring up the object editor - select "com.cisco.crs.cluster.config.AppadminSetupConfig - in right hand side select the row go to second tab and change the "setup state" to "FRESH_INSTALL" from drop down menu.
Login into Appadmin with the user "Administrator" "ciscocisco"
Regards
Haitham

Missing DAQmx folder in vi.lib

Similar Messages

Maybe you are looking for