Missing Data after extraction

Hi,
I have a generic datasource in R3, delivering some 20 plus fields. When I check in RSA3, I get all data, for full extraction or even selective extraction.
I have replicated and activated the DS in BW. Now when I extract the data in BW for a single document, I get all the information in PSA, but when a full extraction without giving any filters, some of the data is missing in the extraction.
Seems nothing wrong in R3 and nothing wrong in BW, what else am I misssing

Hi,
Check the below.
1) Remove selections in Info package.
2) Check the filters in DTP.
3) Compare the number of records PSA and RSA3 in ECC.
4) Compare the number of records PSA and data target
5) If you are missing records from PSA to data target chck filters in DTP and routines.
Regards
Prasad

Similar Messages

Missing data after server restart

Hi,
We restarted our MDM server at the OS level last night. Everything seemed okay after the restart. However, when our users came in this morning, they found that some data was missing from a table. We have a Material repository with 3 main tables. Some data which have previously been populated was not appearing in our Products Detail table, the largest of the three. A large number of rows in the table had columns that failed to load with data on the repository auto-start that occured after the server restart. The auto start value in the mds.ini file was set at 300 (5 minutes) as we had seen this iisue happen once before, and thought that may help.
A stop and restart of the repository corrected the issue. Is there anything we could have done to prevent this? Is it worthwhile to try increasing the auto start delay again? Validating detail data after every server restart is not an effective option.
MDM version: 7.1 SP08
OS: AIX DB: Oracle 11g
Thanks!
Dave

Hi Dave,
I meant that when you load repository using Immediate data is loaded from .acl files (accelerator files) in a async manner.
Whereas when you load by Update Indices new acl files are generated.
Below men6tioned is a comparision between the 2 ways of laoding repository:
Load Repository Immediate
o Loads indexes from accelerator files instead of being regenerated by reading the data them from the DB and creating the index.
o Automatically builds indexes stored in out-of-date accelerator files.
o Is usually fast.
 Load Repository with Update Indices
o Rebuilds all MDM indexes files by reading and indexing data stored in the DB. The results are flushed on disk as accelerator files.
o Necessary by repository schema changes or if any error occurs.
o Might take significant amount of time to complete.
So when you observe some visual data impact in your repository it is good idea to rebuild indexes.
I guess we cannot schedule this as default behavior is to load by immediate even through the inin parameter.
as a best practice one can do this by fixing a time frame eg monthly depending on data/schema changes.
Thanks,
Ravi

Missing data while extraction

Hi,
I extracted the GL data from R/3 to BW and extraction went smoothly. One GL data(G/L Account) didn't loaded to the BW (even in PSA also).
When i was checked in the RSA3 for that datasource that particular GL existed.after that i loaded the only GL thro' infopackage(newly created infopackge) and got loaded.
How come it is possible because the deltas are not missing any data.
Also how the relationship between RSA3 and INIT/Delta loads.
RSA3 Contains all the data(INIT and delta) for reconciliation purpose.
Please give some light on this.
Thanks

Hi,
If it is LO DS RSA3 will takes the Data From Setup tables, for others it will take data from base tables in ECC. See the below Artciles to get more information on RSA3,RSA7, SMQ1.
Checking the Data using Extractor Checker (RSA3) in ECC Delta Repeat Delta etc...
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80f4c455-1dc2-2c10-f187-d264838f21b5&overridelayout=true
Data Flow from LBWQ/SMQ1 to RSA7 in ECC and Delta Extraction in BI
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/d-f/data%20flow%20from%20lbwq_smq1%20to%20rsa7%20in%20ecc%20and%20delta%20extraction%20in%20bi.pdf
Thanks
Reddy

Motion file missing data after MM export

Hello,
after finishing a project I exported it using Media Manager. When I reopened the newly created project, I noticed that all Motion clips where missing the video layer.
I used Motion to blur out some faces and the blur is still there but I'm missing the video track (its just red checker box).
I fortunately still have the original project to export the clips manually but can someone tell me what I should have done differently, please?

Nada don't think. Motion project files with "embedded" video aren't managed by Media Manager.
Jerry

PR05 Missing data after upgrade 4.6C to ECC 6.0

Hi,
We have just migrated from 4.6c to 6.0 and after that on tcode PR05 for many employees the list of trips is empty and for others there are some trips available but not all of them. Tried SU53 to see authorization check but everything is ok.
Does anyone have an idea of what could have happened?
Thank you,
Paulo Siqueira

Hi Christian,
I had already checked that note. But it's not the case. It was missing the role trip, not only some fields. Anyway, I found out what happened. After the upgrade it changed the settings (F9; last icon on the taskbar); option "Display Trips" must be set to all.
Best regards,
Paulo

Missing data after updating to 1.3.5.1

I updated my Palm Pre webOS to 1.3.5.1 and lost ALL my calendar events. My contacts no longer come up when I attempt to create a new text message. I also cannot view contacts or pull them up by typing the contact name when I want to make a call.
Am I missing something? How do I get this info back? How do I sync my contacts with the text and calling applications?
This is rather frustrating...
This question was solved.
View Solution.

If you would still like for us to attempt to restore your data send me a private message with your Service Request number and I will get your case escalated. It should be a 1-517 number.

Missing data after removing formula

Hi All,
iam writing formula "Missing" for one member so its showing missing for that member its gud
but
i remove the formula for that member still its missing its not showing the data for that member how can i get the data for that member with out reloading
what is the reason any help plz
Thanks
Edited by: user8815661 on 10 sept. 2010 02:11

I'm a bit confused, but here's what I think is going on:
1) You have a member (Account, Scenario, something?) that has a formula
2) You have data with that member
3) You have loaded data to that member but the data never shows up because of #1
4) You have deleted the formula in #1
5) Now you want to load data from your source (whatever it is) into this aforementioned member.
Is that correct?
How else would you expect to get data into that member without loading it? Is this value something that can be calculated in Essbase? Wouldn't that lead you back to step #1? Otherwise you're going to have to load it. You could write a query that selects just that member, stick it into a load rule, and load it (or do it through Studio, whatever, the concept is the same) or if it's a file, write a load rule that rejects everything but that member, or clear out and reload all the data.
Or you're going to have to explain it better for me or I'm going to have to drink more coffee. Actually, I'll do the latter regardless -- I need all the help I can get.
66 questions, 50 unresolved? Would you mind marking your questions as answered, if indeed that is the case. Otherwise anyone coming across your threads won't know their final outcome.
Regards,
Cameron Lackpour

Acrobat 9 Professional forms missing data after upgrade to Adobe Reader 10

My principal has a macbook pro with OS 10.6 on it, and Acrobat 9 Professional. One of the Xerox technicians in our district came around and updated Adobe Reader on her computer to AR 10. This caused her computer to lose the license key for Acrobat 9 Professional. Now all the of the data that she had saved in forms done in Acrobat 9 Pro has been lost. When she opens these files, the forms are blank. Is there any help for recovering the data that was lost from these files?

As long as the tech did not remove Acrobat, it should still be there. I am not that familiar with MACS, but that is the case for Windows. I would suggest that the tech be requested to rectify the issue. It may be that she just needs to open Acrobat and then the file. It may be that a MAC has a file association like the PC, and in that case she needs to set the file association back to Acrobat.
If she maintains both AA9 and ARX on the machine, she should also update them. It may be an update issue that is causing the data to not be seen. Some versions have had problems with seeing the data unless the cursor is in the field of interest. So is the data really still there or not?
Hope my limited thoughts about the MAC is of help. I am sure that some MAC folks will be by to give help.

Missing data after upgrade to G6 SP1?

I have a portlet that checks for a user's membership in Collaboration Projects. The relevant code is:
IProject[] projects = projectManager.queryProjects(projectFilter);
for(int i = 0; i < projects.length; i++)
/** line causing error: **/
int[] userids = projects.getRole(RoleType.LEADER).getMemberIDs(MemberQueryType.ALL_USERS);
for (int j = 0; j < userids.length; j++)
if(userids[j] == user.getUserID())
userProjects.add(projects[i]);
I've just upgraded our portal from Plumtree/ALUI G6 to service pack 1. The portlet was working before the upgrade. I'm now getting the following error when I try to display the portlet (JSP) that contains this code:
com.plumtree.remote.prc.collaboration.CollaborationException: Community 205 does not exist
     com.plumtree.remote.prc.collaboration.security.RoleWrapper.getMemberIDs(RoleWrapper.java:105)
     org.apache.jsp.StatusReportInput_jsp._jspService(StatusReportInput_jsp.java:90)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802
I'm guessing that means that somehow the data has gotten out of whack. What I can I do to correct the situation?

As long as the tech did not remove Acrobat, it should still be there. I am not that familiar with MACS, but that is the case for Windows. I would suggest that the tech be requested to rectify the issue. It may be that she just needs to open Acrobat and then the file. It may be that a MAC has a file association like the PC, and in that case she needs to set the file association back to Acrobat.
If she maintains both AA9 and ARX on the machine, she should also update them. It may be an update issue that is causing the data to not be seen. Some versions have had problems with seeing the data unless the cursor is in the field of interest. So is the data really still there or not?
Hope my limited thoughts about the MAC is of help. I am sure that some MAC folks will be by to give help.

Request shows in Red status after extraction of Data from Planning area

Hi Experts,
I am extracting data from DP planning area to APO BW Info Cube. It was working fine but from last few days after extraction we are getting Red status of that request. However whatever data packages we are extracting we are getting same in to Info Cube also. But only status of that request is in Red.
I gone through step by step analysis I found "Data selection succesfully finished?" statement in Red status & rest are in green. When I gone through the details of this statement then I found Missing "Message:Selection Completed" in yellow status.
Any Idea? How do i resolve this issue?
Please advise..
Regards
Sujay

Hi Sujay,
Check the logs obtained after the extraction.
This only will tell you fare idea for you to proceed further
to resolve the error that has happened.
Also check whether the extracted data is correct by
random sampling of extracted data
Regards
R. Senthil Mareeswaran.

Problem in Excel after extracting data from SAP Report

Hello,
I have a problem with Excel file after extracting it from one of the SAP report.
When my client extracted data from SAP in to excel he is coming across minus symbol on both sides of the number.
for ex: -447492177-
When i extracted same SAP report in to excel i didnt face any such problem.
Please share your inputs on what could be the problem.

1. Make sure your client and you are using the same version of Microsoft Excel
2. Let your client try to OPEN the exported xls file from a existed workbook instead of double-clicking the file directly.
Atom

Missing Response Data after PBM Excution

Hi @ all,
after manual execution of a simple Process (BPM) in NWDS ( see Screenshots).
SAP BPM: the Automated activity calls an Integarted Configuration in AEX, and the process ist successfully completed.
SAP PO: the messages are delivered. (Web Services Call), ( Sender Channel SOAP XI 3.0)
The Problem is, i miss the response Data after the process execution.
Thanks a lot
Kind regards
Abdel

Hi,
i need help to solve this issue.
Thank you
Abdel

How to retain data in Delta after extraction

Hi Experts,
We are suppose to extract delta from same datasource for multiple cubes ... from the source system only ... now after we extract delta for cube A, there is another cube B which is suppose to extract delta from the same datasource at different times, is there any setting that we need to do to retain delta after extraction of first delta... so I can use it for another cube ...
thanks.
Sunil.

HI,
DTP will satisfies your requirement.
DTP will update delta data with respect to target.
Get delta upto PSA and update it to targets using Delta enabled DTPs.
U can create number of delta DTPs with respect target.
Regards,
rvc

Can we download the data to App. server after extracting

Hello All,
Is it possible to download the data to application server after extracting . Please let me know where we have to specify the path to download.
Thanks in Advance for help
Regards
Raj

Hi,
You can do this by using infospoke or you can directly take the dump to application server.
For taking the dump directly from cube u have to follow the below steps.
Create a file name in Application server take the path.
Go to the manage of the Cube click on contents. remove maximum hits... below u will find the option as store into app server and specify the path there. click on execute in background.
Khaja

Deleted a free version of PDF Max after purchasing the pro version. That resulted in missing data on the pro version too. Please help

Last week, I purchased the pro version of PDF Max and today deleted the free version since I am not using it anymore.
I don't what happened or how, this also resulted in missing data on the pro version. I created loads of annotations and notes using the pro version. Now, all that's missing. I am using the word "missing" because I think the data (notes and annotations) is still there but its just not showing up in the app. Since, the size of the app did not change. It still is 1.24gb on iTunes. Can you guys please help me recover or should I say figure out a way to display the files on the app? Pretty please!

I'm not familiar with the specific app, but generally speaking if the free and paid versions of an app are separate (i.e. not an in app purchase), what you are seeing will be the case. the only resolution I know of is if the vendor provides an account and stores the data online, or it integrates with something like DropBox. If not, once the old version is deleted, the data is pretty much gone.

Missing Data after extraction

Similar Messages

Maybe you are looking for