Missing data in lead survey translation
Hi everyone,
I create a lead survey in transaction crm_survey_suite. After activating it I want to translate it. I login to the CRM System in the target language, translate the survey and activate the translated version.
When I then choose the translated survey to display it in the detail window on the right side, I can only see the input boxes, but all texts and descriptions are missing.
This only happens in the translated version, the original is still correctly displayed.
I'm working in a CRM 4.0 system.
Any suggestions what the problem could be?
Thanks a lot,
Hi Birgit,
Check the following notes
These might be of some help
Note 748467 - Survey Tool: Error in the translation of questionnaires
Note 791389 - Survey Tool: Translation with special characters incorrect
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>
Similar Messages
-
ELM-Lead survey upload using flatfile
Hi Gurus
I am trying to upload Lead surveys using ELM
In some Lead surveys used radio button Yes/No
when i am trying to upload the surveys using a flat file , getting error message for map date in external list(CRMD_MKTLIST) under process steps tab.
i am using Yes/No text in flat file
Good points wil be awarded
ThanksHi
please check with the mapping format in tranx crmd_mktlist_map for your List.
Its definitely an error of data mapping.
please let me know teh results.
Regards
Sidd -
Help needed with missing data problem in CRVS2010
We recently upgraded the reporting engine in our product to use Crystal Reports for Visual Studio 2010 (previously engine was CR9). Our quote report, which has numerous subreports and lots of conditional formatting, started losing data when a quote took more than a single page to be printed. We knew the SQL results included the data, but the report was not printing those lines at all or sometimes printing a partial line. In addition, the running total on the report would exclude the lines that were being missed on the next page. In one example submitted by a customer, 3 lines were skipped between pages.
I think I have identified two potential issues that document the possibility of data not being included in the report.
The first potential issue is an issue with the "suppress blank section" option being checked. This issue is supposedly fixed with ADAPT01483793, being released someday with service pack 2 for CRVS2010.
The second potential issue is using shared variables. This issue is supposedly fixed with ADAPT01484308, also targeted for SP2.
Our quote report does not explicitly use shared variables with any of the subreports, but it does have several subreports, each in its own section that has the "supress blank section" option checked. We have other reports that use this feature, as well, and they are not exhibiting the problem.
One different thing about the quote report is that it has a section with multiple suppression options selected. The section has a conditional suppression formula, which controls whether the section is included at all within the report. The section also has the suppress blank section option selected. There are multiple fields within the report that are each conditionally suppressed. In theory, the section's suppress formula could evaluate to true, yet all of the fields within the section are suppressed (due to null values), and then the "suppress blank section" option would kick in.
The missing data only seems to happen when the section is not being suppressed, and at least one of the fields is being included in the report. If I clear the "suppress blank section" check box, and change the section formula to also include the rules applied to the fields in the section, the missing data problem seems to be resolved.
Is this related to ADAPT01483793? Will it be fixed in service pack 2?
If more details are needed, I would be happy to provide a sample report with stored data.Hi Don,
Have a look at the Record Selection formula in CR Designer ( stand alone ) and when exported to RPT format opening that report in the Designer also.
There's been a few issues with => logic in the record selection formula. It could be you are running into this problem. Look for NOT inserted into your selection formula.
Oh and SP2 is coming out shortly so it may resolve the issue. But if you want you could purchase a support, or if you have a support contract then create a case in SMP and get a rep to work with you to debug the issue.
If you have not try the Trial Version of CR 2011, put it on a VM-ware image or Test PC so you don't corrupt anything for production and have a look at and test it in that designer also. If you purchase a case and it is a bug then you'll get a credit back for the case.
Don
Edited by: Don Williams on Oct 26, 2011 7:40 AM -
Insert old missing data from one table to another(databaase trigger)
Hello,
i want to do two things
1)I want to insert old missing data from one table to another through a database trigger but it can't be executed that way i don't know what should i do in case of replacing old data in table_1 into table_2
2)what should i use :NEW. OR :OLD. instead.
3) what should i do if i have records exising between the two dates
i want to surpress the existing records.
the following code is what i have but no effect occured.
CREATE OR REPLACE TRIGGER ATTENDANCEE_FOLLOWS
AFTER INSERT ON ACCESSLOG
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
V_COUNT NUMBER(2);
V_TIME_OUT DATE;
V_DATE_IN DATE;
V_DATE_OUT DATE;
V_TIME_IN DATE;
V_ATT_FLAG VARCHAR2(3);
V_EMP_ID NUMBER(11);
CURSOR EMP_FOLLOWS IS
SELECT EMPLOYEEID , LOGDATE , LOGTIME , INOUT
FROM ACCESSLOG
WHERE LOGDATE
BETWEEN TO_DATE('18/12/2008','dd/mm/rrrr')
AND TO_DATE('19/12/2008','dd/mm/rrrr');
BEGIN
FOR EMP IN EMP_FOLLOWS LOOP
SELECT COUNT(*)
INTO V_COUNT
FROM EMP_ATTENDANCEE
WHERE EMP_ID = EMP.EMPLOYEEID
AND DATE_IN = EMP.LOGDATE
AND ATT_FLAG = 'I';
IF V_COUNT = 0 THEN
INSERT INTO EMP_ATTENDANCEE (EMP_ID, DATE_IN ,DATE_OUT
,TIME_IN ,TIME_OUT,ATT_FLAG)
VALUES (TO_NUMBER(TO_CHAR(:NEW.employeeid,99999)),
TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_IN
NULL,
TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_IN
NULL ,'I');
ELSIF V_COUNT > 0 THEN
UPDATE EMP_ATTENDANCEE
SET DATE_OUT = TO_DATE(:NEW.LOGDATE,'dd/mm/rrrr'), -- DATE_OUT,
TIME_OUT = TO_DATE(:NEW.LOGTIME,'HH24:MI:SS'), -- TIME_OUT
ATT_FLAG = 'O'
WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
AND DATE_IN <= (SELECT MAX (DATE_IN )
FROM EMP_ATTENDANCEE
WHERE EMP_ID = TO_NUMBER(TO_CHAR(:NEW.employeeid,99999))
AND DATE_OUT IS NULL
AND TIME_OUT IS NULL )
AND DATE_OUT IS NULL
AND TIME_OUT IS NULL ;
END IF;
END LOOP;
EXCEPTION
WHEN OTHERS THEN RAISE;
END ATTENDANCEE_FOLLOWS ;
Regards,
Abdetu..INSERT INTO SALES_MASTER
( NO
, Name
, PINCODE )
SELECT SALESMANNO
, SALESMANNAME
, PINCODE
FROM SALESMAN_MASTER;Regards,
Christian Balz -
Missing Data from Legacy System
Hello All,
My client went live end of January this year. They had a month of transaction data in their legacy system which they did not bring into SAP. Since this is their first year on SAP and recently implemented Extended Withhold Tax one month data is missing; when they run the 1099s at the end of the year they are going to be reported incorrectly.
How can we bring over that missing data from legacy system over to SAP without having to clear those invoices in SAP?
Thank You In AdvanceHi Shashi,
Have a look : <a href="http://www.box.net/shared/9tda040za6">Transferring Data with DB Connect</a>
<a href="http://sapbwneelam.blogspot.com">More Docs...</a>
Hope it Helps
Srini -
How can I connect dots across missing data points in a line chart?
Hi all!
I have a table in Numbers that I update every few days with a new value for the current date (in this case body metrics like weight, etc.), which looks something like this:
Column 1 Column 2 Column 3
Aug 16, 2011 87.1 15.4
Aug 17, 2011 86.6
Aug 18, 2011 86.1
Aug 19, 2011
Aug 20, 2011 85.7 14.6
Aug 21, 2011 85.3
Every once in a while there will be a missing value for a given date (because I didn't take a reading on that day). When I plot each column against the date on a line chart, there is a gap where there are missing data points. The line does not connect "across" missing data points. Is there a way to make the line connect across missing data points?
Thanks for any help. This thing has been driving me nuts!Leave your nuts in peace.
Don't use line charts but scatter charts.
These ones are able to do the trick.
Of course to do that you must study a bit of Numbers User Guide.
In column D of the Main table, the formula is :
=IF(ISBLANK($B),99999,ROW())
In column E of the Main table, the formula is :
=IF(ISBLANK($C),99999,ROW())
Now I describe the table charter.
In column A, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,0)),"")
In column B,the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $D,ROW())-1,1),"")
In column C, the formula is :
=IFERROR(DAY(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,0)),"")
In column D, the formula is :
=IFERROR(OFFSET(Main :: $A$1,SMALL(Main :: $E,ROW())-1,2),"")
In this table, select the range A1 … D5
and ask for a Scatter chart.
You will get what you need.
I asked that points are joined by curves
I just edited the parameters of Xaxis and Yaxis to get a cleaner look.
I repeat one more time that knowing what is written in the User Guides is useful to be able to solve problems with no obvious answer.
Yvan KOENIG (VALLAURIS, France) samedi 27 août 2011 15:59:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
SMS Transferring/downloading/backup : Is there a way to download/port the missing data/SMS to one iPhone without overwriting the new SMS on the newer iPhone? Here is my dilemma. My iPhone quit working and I couldn’t get it fixed as quickly as I needed to. I bought a used iPhone and started using it normally and downloaded the backup from itunes/icloud. There was a large gap in data where the first iPhone didn’t backup when I thought it had. I have SMS data on both phonesnow and I need them for a court hearing. I have since had the other iPhone repaired and working perfectly. Will downloading a backup wipe out the newer SMS data? I am nervous because I can’t lose the information or my case mey be compromised. Any “Real Help” including programs that work to accomplish this would be very helpful. Thank You in advance…
No, direct access to manipulating the phone's filesystem is not permitted for 3rd party apps in the iOS. It can't be done without hacking the phone, which you certainly don't want to do. The messages can be combined and viewed on your computer, but not on a single phone.
-
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
SSRS 2008 R2 - Missing Data when Exporting to Excel or CSV (Row Count is 500)
Hey Folks,
When exporting SSRS 2008 R2 report to an csv or excel file not all the rows are being exported. Any suggestions on why this is occurring. The number of rows is less then 500 and it seems to be a pretty straight forward export. Any help is
greatly appreciated. Inherited this and not sure if this would be configuration issues or something else. It is happening on a number of reports.
Thanks.Hi Humbly,
According to your description, when you export report into CSV or Excel format, some rows are missing.
In your scenario, since you are missing data “rows” in your exported file, we are guessing if you have any visibility setting like toggle which hide those records. It’s possible that you have set toggle or visibility in your report. After exporting
Excel/CSV, some data might not appear properly. In SSRS 2008 R2, it has reported this kind of issue about data missing after exporting. However, those scenarios are not exactly same as your issue. It mostly turns out be conflict between data and “layout render”
and related to DataElementOutput property. DataElementOutput property controls export behavior, it indicates which report item data should appear in Excel/CSV render. For more information, please refer to this article: Reporting Services:
Why aren’t all my report columns exporting to CSV and/or XML?.
As we tested in our environment(SSRS 2008 R2), no matter what we export into CSV or Excel, we get same results as in BIDS . So I would like to know your report design structure. If possible, please provide some screenshots about results in BIDS and Excel/CSV
render extension results. It may help us find out the root cause of your issue. Thank you.
Best regards,
Qiuyun Yu -
When voting, survey Sharepoint 2013, there is a field created by whom. But the name is not enough. Necessary to add the department name of the profile data in the exported list excel.
Hi,
The OOTB feature “Export to Spreadsheet” won’t contain the department in the exported report, we will need to create a custom one programmatically.
We can use SharePoint Object Model to retrieve the data from the Survey and the User Profile Service, then generate an Excel Spreadsheet with the data we need.
SharePoint Object Model -
SPListItem class
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.splistitem.aspx
Add, Update and Delete List Items Programmatically in SharePoint
http://www.mindfiresolutions.com/Add-Update-and-Delete-List-Items-Programmatically-in-Sharepoint-372.php
More information about
SharePoint Object Model:
http://msdn.microsoft.com/en-us/library/ms473633.ASPX
How to: Work with user profiles and organization profiles by using the server object model in SharePoint 2013
http://msdn.microsoft.com/en-us/library/office/jj163142(v=office.15).aspx
For about
generating an Excel document:
http://www.codeproject.com/Articles/20228/Using-C-to-Create-an-Excel-Document
Or you can post another question to
Excel for Developers for about creating an Excel file programmatically:
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Feel free to reply if there are still any questions.
Best regards
Patrick Liang
TechNet Community Support -
Missing data: Profitability segment no. in Sale order creation
Hi Gurus,
while creating a Sales order, I am getting the Below Error;
"Error while the Operating Concern being determined"
Massage no: KE/AD817
Error: Missing data: Profitability segment no.
Its Urgent..
Can anybody suggest....
Thanks
BKTHi Bani,
Please check if note 380102 helps in this case. From the long text of the error message you can find out which charachteristic is responsible for the error message.
Regards,
Abhisek -
How to analyse a problem in BI ( Example missing Data in a report )
Hello;
What is the best procedure to analyse a problem missing data in BW. the question could be unclear but I am looking for a method to determine directly and without taking long time in follwing the dataflow to be able to say that we have a problem getting a field A ou B.
Regards
AnisHi Anis,
you can debug data flow or let's say specific data load between 2 objects e.g. datasource and DSO or DSO an cube etc... you can track down e.g. like specific sales order was loaded e.g some specific field is treated within the load (e.g. in case there is ABAP routine used). However it is always better to start either from:
top->bottom = report->datasource (source table or extractor checked)
or
bottom->top = datasource->report
and go layer by layer (or infoprovider by inforprovider) to see if particular value is still there.
cheers
m./ -
Last week, I purchased the pro version of PDF Max and today deleted the free version since I am not using it anymore.
I don't what happened or how, this also resulted in missing data on the pro version. I created loads of annotations and notes using the pro version. Now, all that's missing. I am using the word "missing" because I think the data (notes and annotations) is still there but its just not showing up in the app. Since, the size of the app did not change. It still is 1.24gb on iTunes. Can you guys please help me recover or should I say figure out a way to display the files on the app? Pretty please!I'm not familiar with the specific app, but generally speaking if the free and paid versions of an app are separate (i.e. not an in app purchase), what you are seeing will be the case. the only resolution I know of is if the vendor provides an account and stores the data online, or it integrates with something like DropBox. If not, once the old version is deleted, the data is pretty much gone.
-
Missing data status for Idocs : HR ORG Upload in SRM
Hi All,
We are using ALE Idocs for uploading HR ORG in SRM system.We are getting some IDocs errors. 51 status is 'Missing data'.
Details description like below:
Missing data
Message no. HRALX00_ORG315
Diagnosis
It has been determined that the employee 00036837 has been received for the first time. However, not all the data that is needed to create a business partner has been received. In this case, the infotype 1001 and the subtype A209 have not been entered for the employee.
Procedure
Maintain the filter of the appropriate distribution model. To do this, call transaction BD64 in the source system. Add a new filter group to the data filter. Assign the following values for the filter group: infotype: 1001, object type: P, subtype: A209. After you have generated the partner profile again and distributed the distribution model, you can redistribute the relevant IDoc.
Please help me How to resolve this issue.Please let us know if you need any more information.Hi Ramchandra,
it s the best solution to your query to load the IDOCs manually using the context menu of the datapackage or IDOC --> manual update and then refresh the load as it is not throwing any error
check do you have enough number of process running in your system
check for TRFC logs
Thank you -
Missing data: Profitab. Segmt No.
Hi
I am doing a Migration from 4.0b Version to ECC 6. Now my server is up with ECC 6 and have the datas for 4.0b. Order to cash cycle - I am not able to do a sales order. System is giving a message
Missing data: Profitab. Segmt No.
Message no. VU019
Missing data: WBS Element
Message no. VU019
But actually i have not enabled PS or COPA.. Not sure why this error occuring. I have Profit center accounting. All the customizing from 4.0b are copied in ECC 6. Kindly let me know if anybody has come across this problem and how it has been solved
Thanks in advance...
Regards
MuraleKrushna Sbhi murale,
Even i face the same problem, kindly help me out with the solution.
sree...
Maybe you are looking for
-
Is there a way to move songs from my iPod to the Library?
I used my friends computer to download some music (I have dial-up) and now I want to copy some of the songs to the library. Is there a way I can do this?
-
Additional JVM for BI Publisher
Hi folks, we have one JVM right now for our BI Publisher.Its giving out of memory error when load increase. we are thinking to add aditional JVM. is it possible in OBIEE(10.1.3.4.1)? if so ,could anyone send document ?. Thanks in advance Thanks Venka
-
Smart form printing issue with LOCL and SAP printer
Hi, The issues are as follows: 1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL) 2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when u
-
Flex Builder Beta M4 uninstall failure
Flex builder beta M4 has expired 53 days earlier than promised. But that's little trouble. Awful trouble is that it is refusing to uninstall. When I am trying to uninstall, it says this, quote: quote: java.lang.InternalError: jzentry == 0, jzfile = 8
-
Best Practices for Loading Data in 0SD_C03
Hi, Guru, I want to know which is the best practice to have information about Sales, billing, delivery. I know it has this Datasources. Sales Order Item Data - 2LIS_11_VAITM Billing Document Data: Items - 2LIS_13_VDITM Billing Document Header D