Missing data in SWF files created with Batch Utility SP1

Hi All and happy new year !
I have a problem using Xcelsius 2008 batch Utility SP1. On the new SWF file, some of my data are missing. I used a grid component to identify the problem and there are no data where it should have some.
Is there a table size or data range limit?
Or another solution for my problem?
Regards,
E. OLIME

Probably, this Note will be useful: 1394826 - Xcelsius Batch Utility: Data can not be changed when the original data cell is blank

Similar Messages

Can we resize swf file created with AIR API in AIR application?

Hi,
I created a .swf file with AIR API.
I want to open and resize it in AIR application. This .swf file taking dimensions as default in which it opens.
I want to change its width and height.
Is there any way to change its dimensions?
Please suggest me the solution.
thank you

Loading a Flex WindowedApplication into another is not supported. However,
you might be able to access the WindowedApplication and size it. Sub-Apps
in AIR should be based on Application, not WindowedApplication.

DNG files created with LR4 do not show thumbnails

Hi,
When using LR3 to create DNG files from my RAW files, those files would show me thumbnails of my image in Windows Explorer. I am running Windows/7 (64) and have installed a CODEC from "Fast Picture Viewer" that allows thumbnails from RAW & DNG files to be shown. It seems, however, that the thumbnails do not show for DNG's created with LR4.
To Remedy this I uninstalled the CODEC. Downloaded the most recent version and installed it but this did not fix the problem.
I then went to the user forum for the CODEC product and searched for my problem. I found a thread who's solution is to turn off "Embed Fast Load Data" when exporting to DNG and it fixes the problem. I tried this and indeed it did fix it. The responder went on to say ".....When this option is enabled the files created are no longer DNGs (just an undocumented private format of Adobe that no one else can read to this date)". This statement surprised me as it is counter to what I understand Adobe created DNG to be. Can I get some input on this comment as if true it is very troubling.
My second question is that I see where to turn off the "Embed Fast Load Data" in the LR Export module, but where do I do the same thing in the Import module when I'm selecting import mode "Copy to DNG"?
And, my thrid question is this. If indeed the DNG files created by LR4 are proper DNG files and this CODEC is just flawed in some way, does anyone have a better way to allow image thumbnails to be shown in Windows Explorer?
Thanks -- Dan

Hi David,
You testing does not coincide with mine. I have consistently kept "Use
lossy compression" turned off. With lossy turned off, it seems that using
Fast Data Load prevents the thumbnails from displaying whereas turning off
"Fast Data Load" allows the thumbnail to be shown.
Below is comment from Adobe confirming that they have yet to release the
spec containing "Fast Data Load".
From: Ian Lyons [email protected]
Sent: Tuesday, June 05, 2012 12:29 AM
To: Califdan
Subject: DNG files created with LR4 do not show
thumbnails
Re: DNG files created with LR4 do not show thumbnails
created by Ian Lyons in Photoshop Lightroom - View the full discussion

Can I import a swf file (created in FC) into Flash?

Can I import a swf file (created in FC) into Flash?
...also, do you need Flash Player 10 to play these files?

Just did some testing here, and Flash Professional definitely does not like Catalyst projects. Importing to the stage failed silently (gotta love that), while Import to Library appeared to work - I got a MovieClip in my library. However, the clip is empty. I'd guess it is as Chris said, having to do with the fundamental differences in the Flex framework from the way Flash Pro works.
As this did spark my curiosity, I decided to give loading the Catalyst-created project into a Flash Pro project at runtime using ActionScript. I was able to at least get the Catalyst content to appear through this method, but the effects (in this case, a simply button with a Rotate3D effect applied) was a mess.
So the simple answer is "no".

Can't open DNG files created with Mac CS5 downloader in Mac CS4 Photoshop

I recently installed CS5 on my mac but I kept CS4 installed as well. I notice that I cannot open DNG files created with CS5 in Photoshop CS4. Bridge CS4 shows the files only as icons - no image thumbnails. I am able to open these same files on a Windows version of CS4. Is there some plugin for my mac CS4 that will enable me to access the DNG files created with CS5? Is there a way to use my CS5 downloader when converting my raw files from my camera to DNG files that will make them compatiple with PS and Bridge CS4?

rr3rd wrote:
Is there a way to use my CS5 downloader when converting my raw files from my camera to DNG files that will make them compatiple with PS and Bridge CS4?
Well, yes...but you'll need to modify your DNG Converter prefs to allow for that. You''ll need a recent (ideally current DNG Converter 6.4.1 or above) and click on the DNG Converter preferences and select the correct DNG Converter options. Check DNG Converter 6.4.1 (the current version) and click on "Change Preferences" to be sure select Camera Raw 5.4 and later then make sure CS4 is updated to ACR 5.7 (which is the last version of ACR for CS4) However, the changes made to ACR 6.x really should be adopted since IQ for ACR 6.4.x is a lot better...

Captivate File Created with Trial Will Not Open in Paid for Captivate

I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?

Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.

File created with Trial version cannot be opened by Captivate 5.5 (Ensure that the file isn't open, the file isn't damaged....etc.)

Hi,
I have a file created by Trial version of captivate. It was created in a different computer. Now, I have to make some modification in the file. However, when I tried to open it with Captivate 5.5, I got the error shown below. I am not able to use the popular solution provided in this link Click here to view because the file was not created in my computer. I believe that there is a lock on the file since it was created with Trial version of captivate. Is it possible that I send the file to a representative, and they look into it?

Was the file created with the same version? You talk about 'trial', but the only trial version available at this moment is Captivate 8. You were never able to open a Captivate project in a previous version, that explains why you cannot open it in 5.5.

Video from .ts files (created with Arcsoft Showbiz) played in accelerated.

Hello everybody, can you explain me why in PREMIERE PRO CS6, the video from .ts files (created with Arcsoft Showbiz) is played in accelerated while the sound is played normally ?
If it is normal, an update would be great
Thank you.

>imported from vhs (with Hauppage Colossu).
As far as I know, the best way to digitize vhs tapes is with a http://www.grassvalley.com/products/converters product
Model 55 is one way from tape to computer, model 110 allows exporting back to tape
Files are DV AVI which edit very well in all versions of Premiere

Importing movie files created with SONY HDR-TG5

Having trouble importing movie files created with this camera. Have had success importing direct from the camera using streamclip, but struggling with old files imported from our PC. These files have these two extensions; .modd and .m2ts

Eric:
Thank you. MPEG Slipstream worked great.
Do you know if there is software available that would let me see what is in/copy the files in the Sony folder so that I might be able to copy the disk directly instead of having to copy the files off of it with Handbrake? Would having the QT add-on for the MPEG-2 playback component be helpful?
Thanks again
Tim

Nokia 3500 classic - .rms files created with junk ...

I have purchased a Nokia 3500 classic in July 2008. I am using 1GB memory card and installing applications on it.
Recently I found that though my memory card's capacity is 1GB, the space utilised was shown as 3.4GB. I was stunned. Then I opened the memory card in computer via usb cable and found that there are lot of .rms files created with junk characters file names and i am unable to delete the files. The only option left to me was format the memory card and I went for that. After formating, I again installed three applications and again i found that the file size of the application itself is increasing by some KBs.
I have scanned it but no virus found.
Why this is happening and what is the solution for it. Please help.

it are the settings of the app(i think) so thas what thay are and the junk charecters make it hidden for EVRY SINGLE FILE MANAGER FOR J2ME(cell phone app)
vinayshah wrote:
I have purchased a Nokia 3500 classic in July 2008. I am using 1GB memory card and installing applications on it.
Recently I found that though my memory card's capacity is 1GB, the space utilised was shown as 3.4GB. I was stunned. Then I opened the memory card in computer via usb cable and found that there are lot of .rms files created with junk characters file names and i am unable to delete the files. The only option left to me was format the memory card and I went for that. After formating, I again installed three applications and again i found that the file size of the application itself is increasing by some KBs.
I have scanned it but no virus found.
Why this is happening and what is the solution for it. Please help.

After Effects CS6 connot open files created with CC 12.1 Mac version

After Effects CS6 connot open files created with CC 12.1 Mac version. Is there an update?
I am running Windows 7 Pro and Adobe CS6 Suite with all updates

You are never able to open projects from one version of After Effects in an earlier version. This has always been the case.
You can use the command File > Save As > Save A Copy As CS6 to save a version of the project from After Effects CC (12) that can be opened in After Effects CS6 (11).

Is there any simulator to test ipad iphone ipa files created with Adobe Director 12?

Is there any simulator to test ipad iphone *ipa files created with Adobe Director 12?

No. Luckily it is very quick to compile and test on the iPad. I've watched people using Flashbuilder and it seems to be a much more complex process.

Can sdk3.0 application swfloader swf file builder with sdk4.6

I have an application builder with sdk3.0. Can I use swfloader to load a swf file builder with sdk4.6?

That configuration is not supported. The 3.0 SWF will set the API version to some lower number and any FP10 or FP11 APIs will break.

Usage limitations on files created with CS6 beta?

My gut tells me that the cs6 beta falls under the cs6 license sections "Non-Serialized Software" and "Evaluation software" which state:
"...for demonstration, evaluation, and training purposes only, and only if any Output Files or other materials produced through such use are used only for internal, non-commercial, and non-production purposes."
Am I correct in assuming that this applies to all files created with the cs6 beta? I don't see this discussed anywhere which makes me wonder. I have made some nice progress on one of my files and now I'm wondering if I have to stop and redo everything in my old version. I don't want to sink much time into the beta if nothing I create is publicly usable.
Official clarification would be appreciated.

It's completely awkward that I haven't realised this so far, usually I export everything to PNG -> resize PNG with ACDSee -> convert to JPEG and then forget about it Thank you for clearing this up!

Why won't excel read my csv file created with the powersell out-file automatically.

I wrote a PowerShell script that creates a CSV formatted file. The script simply creates a comma delimited string for each entry and adds it to a collection. Then the out-file command write it to a file.
When you open it with Excel each line is put into one cell. If you import the file and specify the "," as the delimiter, it imports just fine. If the data is saved out again as a csv file, the file is about half the size and opens
just fine with excel.
If you open the original file and the file created by Excel with notepad, they look the same.
So the files are different in size, contents look the same, but Excel won't automatically open the original file.
Any ideas of why this happens? Also PowerShell and Excel are both running on Server 2012 R2. Excel is a remote app.
If I do an export-CSV, I get some kind of information about the object.
Here is the script:
foreach ($group in $groups)
   $header += '"' + $group.name + '",'
   $CSVdata = @()
   $CSVdata += $header
   # Create a user entry
   $users = Get-ADUser -filter * |select SamAccountname, Name | sort SamAccountName
   foreach ($user in $users)
      $Groupmembership = Get-ADPrincipalGroupMembership -Identity $user.SamAccountName
      $userentry = '"' + $user.SamAccountName + '",'
      $user
      foreach ($group in $groups)
          if ($Groupmembership.SamAccountName -contains $group.SamAccountName) { $userentry += '"X",'}
          else { $userentry += '"",' }
       $CSVdata += $userentry
      $CSVdata
      Out-File -inputobject $CSVdata -FilePath c:\batch\GroupMembership.csv

Ok the script works exactly like I want it. Thank you very much.
I am trying to understand the script but I am unable to figure out what the line "$keys=$t.Keys|%{$_}"
does. I figured ".keys" was a method but my search for it comes up blank. Do you have a reference you can point me to?

Missing data in SWF files created with Batch Utility SP1

Similar Messages

Maybe you are looking for