Missing dependencies to run steam with arch provided versions of libs

Hi everyone.
My system is 64 bit arch.
And i am trying to run via terminal with "STEAM_RUNTIME=0 steam" command.
But this is impossible because i need to install some 32 bit libraries before that. So to find what libraries are needed i used these commands.
cd ~/.local/share/Steam/ubuntu12_32
$ LD_LIBRARY_PATH=".:${LD_LIBRARY_PATH}" ldd $(file *|sed '/ELF/!d;s/:.*//g')|grep 'not found'|sort|uniq
It gave me a lot of libraries to install and i installed most. But i couldn't find these libraries.
libdbus-glib-1.so.2 => not found
libnm-glib.so.4 => not found
libnm-util.so.2 => not found
libudev.so.0 => not found
libusb-1.0.so.0 => not found
Where can i find 32 bit versions of these libraries.
Thanks in advance.
Last edited by hozturk0327 (2014-04-26 16:47:55)

How did you install steam and have you read the wiki article?
See also https://wiki.archlinux.org/index.php/FA … ge_is_X.3F

Similar Messages

Depreciation Run fails with out providing a proper error

Hi Experts
I have some where around 14,000 assets in my fixed assets master in SAP B1. Currently it takes 15 hours to run the depreciation. But from December after it runs for 15 hours it shows the status as Posting journal entries but after a while it fails the run saying the depreciation run has been failed and cancelled. But there is no error description. When i check the log file in the %temp% folder also there is no error given.
How can i solve this problem this is critical to our operation, please let me know the settings that i have to check and everything
Thanks & Regards
Kanishka Wickrama

Hi Gordon
When we ran the depreciation in November it was successful, but in December we added some where around 2,000 more assets. After that only the depreciation started failing again. So is there any criteria that i have to check in the database.and is there anything that i can do to speed up the depreciation run.
Do you know any other third party add-on that we can use to manage the fixed assets because currently i find it very hard to trouble shoot.
Thanks & Regards
Kanishka Wickrama

Original file missing after sync-ing folder with PS edit versions

Here's an oddly specific and challenging problem for you, I bet you can't figure it out (I'm trying to pluck your competitive strings).
I just noticed that some of my photos are missing from the library in lightroom, specifically the original versions of photos that have virtual copies edited in photoshop in folders that have since been synchronized. Weird, and very anoying. The files are still there (in wondows explorer) but when I try to re-import them lightroom doesn't see them, only the PS edited copies (.tif files). I told lightroom to allow duplicates and it sees all the photos in the folder except those missing ones. This does not happen to my PS edited virtual copies in folders that have not been synchronized. It is not a matter of stacking, or at least Lightroom does not think the PS copies are stacked at all so I can't unstack them. This is really annoying and I'm hoping someone can help me get them back into lightroom (preferably with the accompanying development settings) and also how to avoid this problem in the future. If you need any further details or screenshots let me know
PS: I import files from my camcorder using a different program because lightroom does not acknowledge that particular video file format. That's why I have to synchronize some folders and not others.

The first group are from one of the synchronized folders so only the PS copy shows up in lightroom. The second group are from a folder than hasn't been synchronized so the PS and original files both show up in lightroom.

Running Steam

When running steam, it says: "OpenGL GLX extensions not supported by display".
What can I do to solve this?
More info:
Samsung Laptop w/ Dual GPUs (intel & nvidia). Nvidia driver installed (I assume the system only uses the nvidia GPU and I'm fine with that).
Steam command line output:
[gilnaa@localhost ~]$ steam > st.log
[gilnaa@localhost ~]$ cat st.log
Running Steam on arch 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1407966480_client)
Xlib: extension "GLX" missing on display ":0.0".
Installing breakpad exception handler for appid(steam)/version(1407966480)
Installing breakpad exception handler for appid(steam)/version(1407966480)
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
OpenGL GLX extension not supported by displayAssert( Assertion Failed: Fatal Error: OpenGL GLX extension not supported by display ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/Main.cpp:284
Installing breakpad exception handler for appid(steam)/version(1407966480)
Uploading dump (out-of-process) [proxy '']
/tmp/dumps/assert_20140823162512_5.dmp
[gilnaa@localhost ~]$ glxinfo
name of display: :0.0
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
[gilnaa@localhost ~]$ glxgears
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't get an RGB, Double-buffered visual
[multilib] is enabled. I've also installed (manually):
multilib/lib32-nvidia-utils 340.32-1
multilib/lib32-mesa 10.2.6-1
multilib/lib32-mesa-demos 8.2.0-2
extra/mesa-demos 8.2.0-3
multilib/lib32-nvidia-libgl 340.32-1
How can I make steam work?

Still doesn't work.
I've tried running `nvidia-xconfig` (which I havn't before), but after that, xorg cannot find the screen.
How can I make sure that the NVIDIA driver is the active GPU driver?
Edit: I ran nvidia-settings and it assured me I was NOT running the nvidia driver. It advised me to run nvidia-xconfig, after which xorg server won't start (i'll try again and get a specific log file)
Edit 2:
Here is the Xorg log:
[ 15.411]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 15.411] X Protocol Version 11, Revision 0
[ 15.411] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 15.411] Current Operating System: Linux localhost 3.16.1-1-ARCH #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014 x86_64
[ 15.411] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda6 rw
[ 15.411] Build Date: 31 July 2014 11:53:19AM
[ 15.411]
[ 15.411] Current version of pixman: 0.32.6
[ 15.411] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.411] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.411] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 23 21:17:29 2014
[ 15.502] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.582] (==) No Layout section. Using the first Screen section.
[ 15.582] (==) No screen section available. Using defaults.
[ 15.582] (**) |-->Screen "Default Screen Section" (0)
[ 15.582] (**) | |-->Monitor "<default monitor>"
[ 15.596] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.596] (==) Automatically adding devices
[ 15.596] (==) Automatically enabling devices
[ 15.596] (==) Automatically adding GPU devices
[ 15.773] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 15.773] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15.773] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.779] (II) Loader magic: 0x818d80
[ 15.780] (II) Module ABI versions:
[ 15.780] X.Org ANSI C Emulation: 0.4
[ 15.780] X.Org Video Driver: 18.0
[ 15.780] X.Org XInput driver : 21.0
[ 15.780] X.Org Server Extension : 8.0
[ 15.782] (EE) systemd-logind: failed to get session: PID 299 does not belong to any known session
[ 15.782] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 15.782] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15.784] (--) PCI:*(0:0:2:0) 8086:0166:144d:c711 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 15.784] (--) PCI: (0:1:0:0) 10de:1140:144d:c711 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 15.784] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.790] (II) LoadModule: "glx"
[ 15.894] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.276] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.276] compiled for 4.0.2, module version = 1.0.0
[ 18.276] Module class: X.Org Server Extension
[ 18.290] (II) NVIDIA GLX Module 340.32 Tue Aug 5 20:32:43 PDT 2014
[ 18.297] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 18.297] loading driver: nvidia
[ 18.297] (==) Matched intel as autoconfigured driver 0
[ 18.297] (==) Matched nvidia as autoconfigured driver 1
[ 18.297] (==) Matched nouveau as autoconfigured driver 2
[ 18.297] (==) Matched nvidia as autoconfigured driver 3
[ 18.297] (==) Matched nv as autoconfigured driver 4
[ 18.297] (==) Matched intel as autoconfigured driver 5
[ 18.297] (==) Matched modesetting as autoconfigured driver 6
[ 18.297] (==) Matched fbdev as autoconfigured driver 7
[ 18.297] (==) Matched vesa as autoconfigured driver 8
[ 18.297] (==) Assigned the driver to the xf86ConfigLayout
[ 18.297] (II) LoadModule: "intel"
[ 18.394] (WW) Warning, couldn't open module intel
[ 18.394] (II) UnloadModule: "intel"
[ 18.394] (II) Unloading intel
[ 18.394] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.394] (II) LoadModule: "nvidia"
[ 18.395] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.478] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.478] compiled for 4.0.2, module version = 1.0.0
[ 18.478] Module class: X.Org Video Driver
[ 18.479] (II) LoadModule: "nouveau"
[ 18.480] (WW) Warning, couldn't open module nouveau
[ 18.480] (II) UnloadModule: "nouveau"
[ 18.480] (II) Unloading nouveau
[ 18.480] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.480] (II) LoadModule: "nv"
[ 18.480] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 18.487] (II) Module nv: vendor="X.Org Foundation"
[ 18.487] compiled for 1.16.0, module version = 2.1.20
[ 18.487] Module class: X.Org Video Driver
[ 18.487] ABI class: X.Org Video Driver, version 18.0
[ 18.487] (II) LoadModule: "modesetting"
[ 18.488] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.501] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.501] compiled for 1.16.0, module version = 0.9.0
[ 18.501] Module class: X.Org Video Driver
[ 18.501] ABI class: X.Org Video Driver, version 18.0
[ 18.501] (II) LoadModule: "fbdev"
[ 18.501] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.509] (II) Module fbdev: vendor="X.Org Foundation"
[ 18.509] compiled for 1.16.0, module version = 0.4.4
[ 18.509] Module class: X.Org Video Driver
[ 18.509] ABI class: X.Org Video Driver, version 18.0
[ 18.509] (II) LoadModule: "vesa"
[ 18.509] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.522] (II) Module vesa: vendor="X.Org Foundation"
[ 18.522] compiled for 1.16.0, module version = 2.3.2
[ 18.522] Module class: X.Org Video Driver
[ 18.522] ABI class: X.Org Video Driver, version 18.0
[ 18.522] (II) NVIDIA dlloader X Driver 340.32 Tue Aug 5 20:13:04 PDT 2014
[ 18.522] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.534] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
GeForce GTS 360M, Quadro FX 1800M
[ 18.539] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.539] (II) FBDEV: driver for framebuffer: fbdev
[ 18.539] (II) VESA: driver for VESA chipsets: vesa
[ 18.539] (++) using VT number 1
[ 18.539] (II) modesetting(0): using drv /dev/dri/card0
[ 18.539] (WW) Falling back to old probe method for fbdev
[ 18.539] (II) Loading sub module "fbdevhw"
[ 18.539] (II) LoadModule: "fbdevhw"
[ 18.540] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.547] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 18.547] compiled for 1.16.0, module version = 0.0.2
[ 18.547] ABI class: X.Org Video Driver, version 18.0
[ 18.547] (WW) Falling back to old probe method for vesa
[ 18.547] (II) modesetting(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.547] (==) modesetting(0): Depth 24, (==) framebuffer bpp 32
[ 18.547] (==) modesetting(0): RGB weight 888
[ 18.547] (==) modesetting(0): Default visual is TrueColor
[ 18.547] (II) modesetting(0): ShadowFB: preferred YES, enabled YES
[ 18.547] (II) modesetting(0): Output LVDS-0 has no monitor section
[ 18.548] (II) modesetting(0): Output VGA-0 has no monitor section
[ 18.549] (II) modesetting(0): Output HDMI-0 has no monitor section
[ 18.549] (II) modesetting(0): Output DisplayPort-0 has no monitor section
[ 18.549] (II) modesetting(0): EDID for output LVDS-0
[ 18.549] (II) modesetting(0): Manufacturer: AUO Model: 46ec Serial#: 0
[ 18.549] (II) modesetting(0): Year: 2011 Week: 15
[ 18.549] (II) modesetting(0): EDID Version: 1.4
[ 18.549] (II) modesetting(0): Digital Display Input
[ 18.549] (II) modesetting(0): 6 bits per channel
[ 18.549] (II) modesetting(0): Digital interface is undefined
[ 18.549] (II) modesetting(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 18.549] (II) modesetting(0): Gamma: 2.20
[ 18.549] (II) modesetting(0): No DPMS capabilities specified
[ 18.549] (II) modesetting(0): Supported color encodings: RGB 4:4:4
[ 18.549] (II) modesetting(0): First detailed timing is preferred mode
[ 18.549] (II) modesetting(0): Preferred mode is native pixel format and refresh rate
[ 18.549] (II) modesetting(0): redX: 0.590 redY: 0.340 greenX: 0.330 greenY: 0.550
[ 18.549] (II) modesetting(0): blueX: 0.150 blueY: 0.140 whiteX: 0.313 whiteY: 0.329
[ 18.549] (II) modesetting(0): Manufacturer's mask: 0
[ 18.549] (II) modesetting(0): Supported detailed timing:
[ 18.549] (II) modesetting(0): clock: 70.7 MHz Image Size: 344 x 193 mm
[ 18.549] (II) modesetting(0): h_active: 1366 h_sync: 1374 h_sync_end 1384 h_blank_end 1492 h_border: 0
[ 18.549] (II) modesetting(0): v_active: 768 v_sync: 771 v_sync_end 772 v_blanking: 790 v_border: 0
[ 18.549] (II) modesetting(0): Unknown vendor-specific block f
[ 18.549] (II) modesetting(0): AUO
[ 18.549] (II) modesetting(0): B156XW04 V6
[ 18.549] (II) modesetting(0): EDID (in hex):
[ 18.549] (II) modesetting(0): 00ffffffffffff0006afec4600000000
[ 18.549] (II) modesetting(0): 0f15010490221378020bb59757548c26
[ 18.549] (II) modesetting(0): 23505400000001010101010101010101
[ 18.549] (II) modesetting(0): 0101010101019e1b567e50001630080a
[ 18.549] (II) modesetting(0): 310058c1100000180000000f00000000
[ 18.549] (II) modesetting(0): 00000000000000000020000000fe0041
[ 18.549] (II) modesetting(0): 554f0a202020202020202020000000fe
[ 18.549] (II) modesetting(0): 004231353658573034205636200a0084
[ 18.549] (II) modesetting(0): Printing probed modes for output LVDS-0
[ 18.549] (II) modesetting(0): Modeline "1366x768"x60.0 70.70 1366 1374 1384 1492 768 771 772 790 -hsync -vsync (47.4 kHz eP)
[ 18.549] (II) modesetting(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 18.549] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 18.549] (II) modesetting(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 18.549] (II) modesetting(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 18.549] (II) modesetting(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 18.549] (II) modesetting(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 18.549] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 18.549] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 18.550] (II) modesetting(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 18.550] (II) modesetting(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 18.550] (II) modesetting(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 18.550] (II) modesetting(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 18.550] (II) modesetting(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 18.550] (II) modesetting(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 18.550] (II) modesetting(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 18.550] (II) modesetting(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 18.551] (II) modesetting(0): EDID for output VGA-0
[ 18.551] (II) modesetting(0): EDID for output HDMI-0
[ 18.551] (II) modesetting(0): EDID for output DisplayPort-0
[ 18.551] (II) modesetting(0): Output LVDS-0 connected
[ 18.551] (II) modesetting(0): Output VGA-0 disconnected
[ 18.551] (II) modesetting(0): Output HDMI-0 disconnected
[ 18.551] (II) modesetting(0): Output DisplayPort-0 disconnected
[ 18.551] (II) modesetting(0): Using exact sizes for initial modes
[ 18.551] (II) modesetting(0): Output LVDS-0 using initial mode 1366x768
[ 18.551] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.551] (==) modesetting(0): DPI set to (96, 96)
[ 18.551] (II) Loading sub module "fb"
[ 18.551] (II) LoadModule: "fb"
[ 18.551] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.560] (II) Module fb: vendor="X.Org Foundation"
[ 18.560] compiled for 1.16.0, module version = 1.0.0
[ 18.560] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.560] (II) Loading sub module "shadow"
[ 18.560] (II) LoadModule: "shadow"
[ 18.560] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 18.563] (II) Module shadow: vendor="X.Org Foundation"
[ 18.563] compiled for 1.16.0, module version = 1.1.0
[ 18.563] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.564] (II) UnloadModule: "nvidia"
[ 18.564] (II) Unloading nvidia
[ 18.564] (II) UnloadModule: "nv"
[ 18.564] (II) Unloading nv
[ 18.564] (II) UnloadModule: "fbdev"
[ 18.564] (II) Unloading fbdev
[ 18.564] (II) UnloadSubModule: "fbdevhw"
[ 18.564] (II) Unloading fbdevhw
[ 18.564] (II) UnloadModule: "vesa"
[ 18.564] (II) Unloading vesa
[ 18.564] (==) Depth 24 pixmap format is 32 bpp
[ 18.592] (==) modesetting(0): Backing store enabled
[ 18.592] (==) modesetting(0): Silken mouse enabled
[ 18.592] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.593] (==) modesetting(0): DPMS enabled
[ 18.610] (--) RandR disabled
[ 18.694] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 18.694] (II) modesetting(0): Damage tracking initialized
[ 18.694] (II) modesetting(0): Setting screen physical size to 361 x 203
[ 19.222] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 19.222] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.222] (II) LoadModule: "evdev"
[ 19.223] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.252] (II) Module evdev: vendor="X.Org Foundation"
[ 19.252] compiled for 1.16.0, module version = 2.9.0
[ 19.252] Module class: X.Org XInput Driver
[ 19.252] ABI class: X.Org XInput driver, version 21.0
[ 19.252] (II) Using input driver 'evdev' for 'Power Button'
[ 19.252] (**) Power Button: always reports core events
[ 19.252] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 19.252] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.252] (--) evdev: Power Button: Found keys
[ 19.252] (II) evdev: Power Button: Configuring as keyboard
[ 19.252] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 19.252] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.252] (**) Option "xkb_rules" "evdev"
[ 19.252] (**) Option "xkb_model" "pc104"
[ 19.252] (**) Option "xkb_layout" "us"
[ 19.283] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 19.283] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.283] (II) Using input driver 'evdev' for 'Video Bus'
[ 19.283] (**) Video Bus: always reports core events
[ 19.283] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 19.283] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 19.283] (--) evdev: Video Bus: Found keys
[ 19.283] (II) evdev: Video Bus: Configuring as keyboard
[ 19.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
[ 19.283] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 19.283] (**) Option "xkb_rules" "evdev"
[ 19.283] (**) Option "xkb_model" "pc104"
[ 19.283] (**) Option "xkb_layout" "us"
[ 19.284] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 19.284] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19.284] (II) Using input driver 'evdev' for 'Video Bus'
[ 19.284] (**) Video Bus: always reports core events
[ 19.284] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 19.284] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 19.284] (--) evdev: Video Bus: Found keys
[ 19.284] (II) evdev: Video Bus: Configuring as keyboard
[ 19.284] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0d/LNXVIDEO:00/input/input7/event5"
[ 19.284] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 19.284] (**) Option "xkb_rules" "evdev"
[ 19.284] (**) Option "xkb_model" "pc104"
[ 19.284] (**) Option "xkb_layout" "us"
[ 19.284] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 19.284] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.284] (II) Using input driver 'evdev' for 'Power Button'
[ 19.284] (**) Power Button: always reports core events
[ 19.284] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 19.284] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.284] (--) evdev: Power Button: Found keys
[ 19.284] (II) evdev: Power Button: Configuring as keyboard
[ 19.285] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[ 19.285] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 19.285] (**) Option "xkb_rules" "evdev"
[ 19.285] (**) Option "xkb_model" "pc104"
[ 19.285] (**) Option "xkb_layout" "us"
[ 19.285] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 19.285] (II) No input driver specified, ignoring this device.
[ 19.285] (II) This device may have been added with another device file.
[ 19.286] (II) config/udev: Adding input device Webcam SC-10HDD12636P (/dev/input/event11)
[ 19.286] (**) Webcam SC-10HDD12636P: Applying InputClass "evdev keyboard catchall"
[ 19.286] (II) Using input driver 'evdev' for 'Webcam SC-10HDD12636P'
[ 19.286] (**) Webcam SC-10HDD12636P: always reports core events
[ 19.286] (**) evdev: Webcam SC-10HDD12636P: Device: "/dev/input/event11"
[ 19.286] (--) evdev: Webcam SC-10HDD12636P: Vendor 0xc45 Product 0x64e0
[ 19.286] (--) evdev: Webcam SC-10HDD12636P: Found keys
[ 19.286] (II) evdev: Webcam SC-10HDD12636P: Configuring as keyboard
[ 19.286] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12/event11"
[ 19.286] (II) XINPUT: Adding extended input device "Webcam SC-10HDD12636P" (type: KEYBOARD, id 10)
[ 19.286] (**) Option "xkb_rules" "evdev"
[ 19.286] (**) Option "xkb_model" "pc104"
[ 19.286] (**) Option "xkb_layout" "us"
[ 19.287] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 19.287] (II) No input driver specified, ignoring this device.
[ 19.287] (II) This device may have been added with another device file.
[ 19.287] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 19.287] (II) No input driver specified, ignoring this device.
[ 19.287] (II) This device may have been added with another device file.
[ 19.287] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[ 19.287] (II) No input driver specified, ignoring this device.
[ 19.287] (II) This device may have been added with another device file.
[ 19.287] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 19.287] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.287] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 19.287] (**) AT Translated Set 2 keyboard: always reports core events
[ 19.288] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 19.288] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 19.288] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 19.288] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 19.288] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 19.288] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 19.288] (**) Option "xkb_rules" "evdev"
[ 19.288] (**) Option "xkb_model" "pc104"
[ 19.288] (**) Option "xkb_layout" "us"
[ 19.288] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[ 19.288] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 19.288] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 19.288] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 19.288] (II) LoadModule: "synaptics"
[ 19.289] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19.303] (II) Module synaptics: vendor="X.Org Foundation"
[ 19.303] compiled for 1.16.0, module version = 1.8.0
[ 19.303] Module class: X.Org XInput Driver
[ 19.303] ABI class: X.Org XInput driver, version 21.0
[ 19.303] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 19.303] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 19.303] (**) Option "Device" "/dev/input/event7"
[ 19.413] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1210 - 5738 (res 48)
[ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 986 - 4886 (res 80)
[ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 19.413] (**) Option "TapButton1" "1"
[ 19.413] (**) Option "TapButton2" "2"
[ 19.413] (**) Option "TapButton3" "3"
[ 19.413] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 19.414] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 19.466] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event7"
[ 19.466] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 19.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 19.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 19.467] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.033
[ 19.467] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 19.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 19.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 19.467] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 19.467] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 19.468] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 19.468] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 19.468] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 19.468] (II) No input driver specified, ignoring this device.
[ 19.468] (II) This device may have been added with another device file.
[ 32.387] (II) modesetting(0): EDID vendor "AUO", prod id 18156
[ 32.387] (II) modesetting(0): Printing DDC gathered Modelines:
[ 32.387] (II) modesetting(0): Modeline "1366x768"x0.0 70.70 1366 1374 1384 1492 768 771 772 790 -hsync -vsync (47.4 kHz eP)
Along with the Xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 340.32 (buildmeister@swio-display-x64-rhel04-01) Tue Aug 5 21:15:33 PDT 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by Gilnaa (2014-08-23 12:26:16)

Having issues running steam

i did a fresh install of arch a few days ago and steam stopped working on the 2nd. i don't know why.
what i tried so far:
purge all and reinstall steam
and
xset +fp /usr/share/fonts/100dpi/
in vain.
anyways
steam
Running Steam on arch rolling 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(0_client)
*** Error in `/home/milkman/.local/share/Steam/ubuntu12_32/steam': free(): invalid pointer: 0xf74f3f94 ***
======= Backtrace: =========
/usr/lib32/libc.so.6(+0x6b5f9)[0xf70ea5f9]
/usr/lib32/libc.so.6(+0x71247)[0xf70f0247]
/usr/lib32/libc.so.6(+0x71a1d)[0xf70f0a1d]
/home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6(XFree+0x1b)[0xf73d3efb]
/home/milkman/.local/share/Steam/ubuntu12_32/steam(+0x43c69)[0xf7538c69]
/home/milkman/.local/share/Steam/ubuntu12_32/steam(+0x44444)[0xf7539444]
/home/milkman/.local/share/Steam/ubuntu12_32/steam(+0x14d56)[0xf7509d56]
/usr/lib32/libc.so.6(__libc_start_main+0xde)[0xf7096e5e]
/home/milkman/.local/share/Steam/ubuntu12_32/steam(+0x18395)[0xf750d395]
======= Memory map: ========
f4309000-f4312000 rw-p 00000000 00:00 0
f4312000-f4313000 rw-p 00000000 00:00 0
f4313000-f4314000 r--p 00000000 00:00 0
f4314000-f4315000 rw-p 00000000 00:00 0
f4315000-f4316000 r--p 00000000 00:00 0
f4316000-f4329000 r-xp 00000000 08:14 3192088 /usr/lib32/libXext.so.6.4.0
f4329000-f432a000 r--p 00012000 08:14 3192088 /usr/lib32/libXext.so.6.4.0
f432a000-f432b000 rw-p 00013000 08:14 3192088 /usr/lib32/libXext.so.6.4.0
f432b000-f5c58000 r-xp 00000000 08:14 3171120 /usr/lib32/libnvidia-glcore.so.343.36
f5c58000-f5c76000 rwxp 0192d000 08:14 3171120 /usr/lib32/libnvidia-glcore.so.343.36
f5c76000-f68dd000 r-xp 0194b000 08:14 3171120 /usr/lib32/libnvidia-glcore.so.343.36
f68dd000-f6920000 rw-p 025b2000 08:14 3171120 /usr/lib32/libnvidia-glcore.so.343.36
f6920000-f6936000 rw-p 00000000 00:00 0
f6936000-f693a000 r-xp 00000000 08:14 3171128 /usr/lib32/libnvidia-tls.so.343.36
f693a000-f693b000 rw-p 00003000 08:14 3171128 /usr/lib32/libnvidia-tls.so.343.36
f693b000-f69f3000 r-xp 00000000 08:14 3280595 /usr/lib32/nvidia/libGL.so.343.36
f69f3000-f6a11000 rwxp 000b8000 08:14 3280595 /usr/lib32/nvidia/libGL.so.343.36
f6a11000-f6a41000 r-xp 000d6000 08:14 3280595 /usr/lib32/nvidia/libGL.so.343.36
f6a41000-f6a46000 rw-p 00106000 08:14 3280595 /usr/lib32/nvidia/libGL.so.343.36
f6a46000-f6a55000 rw-p 00000000 00:00 0
f6a55000-f6a8c000 r-xp 00000000 08:14 17170998 /home/milkman/.local/share/Steam/ubuntu12_32/crashhandler.so
f6a8c000-f6a8d000 r--p 00037000 08:14 17170998 /home/milkman/.local/share/Steam/ubuntu12_32/crashhandler.so
f6a8d000-f6a8e000 rw-p 00038000 08:14 17170998 /home/milkman/.local/share/Steam/ubuntu12_32/crashhandler.so
f6a8e000-f6e67000 rw-p 00000000 00:00 0
f6e67000-f7033000 r--p 00000000 08:14 3200236 /usr/lib/locale/locale-archive
f7033000-f7036000 rw-p 00000000 00:00 0
f7036000-f703b000 r-xp 00000000 08:14 17171031 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0
f703b000-f703c000 r--p 00004000 08:14 17171031 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0
f703c000-f703d000 rw-p 00005000 08:14 17171031 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0
f703d000-f703e000 rw-p 00000000 00:00 0
f703e000-f7040000 r-xp 00000000 08:14 17171038 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXau.so.6.0.0
f7040000-f7041000 r--p 00001000 08:14 17171038 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXau.so.6.0.0
f7041000-f7042000 rw-p 00002000 08:14 17171038 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXau.so.6.0.0
f7042000-f705b000 r-xp 00000000 08:14 17171078 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1
f705b000-f705c000 r--p 00018000 08:14 17171078 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1
f705c000-f705d000 rw-p 00019000 08:14 17171078 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1
f705d000-f707d000 r-xp 00000000 08:14 17171040 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1.1.0
f707d000-f707e000 r--p 0001f000 08:14 17171040 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1.1.0
f707e000-f707f000 rw-p 00020000 08:14 17171040 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1.1.0
f707f000-f7230000 r-xp 00000000 08:14 3149262 /usr/lib32/libc-2.20.so
f7230000-f7233000 r--p 001b0000 08:14 3149262 /usr/lib32/libc-2.20.so
f7233000-f7235000 rw-p 001b3000 08:14 3149262 /usr/lib32/libc-2.20.so
f7235000-f7238000 rw-p 00000000 00:00 0
f7238000-f7250000 r-xp 00000000 08:14 3149243 /usr/lib32/libpthread-2.20.so
f7250000-f7252000 r--p 00017000 08:14 3149243 /usr/lib32/libpthread-2.20.so
f7252000-f7253000 rw-p 00019000 08:14 3149243 /usr/lib32/libpthread-2.20.so
f7253000-f7255000 rw-p 00000000 00:00 0
f7255000-f7332000 r-xp 00000000 08:14 17171035 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.0.18
f7332000-f7336000 r--p 000dc000 08:14 17171035 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.0.18
f7336000-f7337000 rw-p 000e0000 08:14 17171035 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.0.18
f7337000-f733e000 rw-p 00000000 00:00 0
f733e000-f7341000 r-xp 00000000 08:14 3164720 /usr/lib32/libdl-2.20.so
f7341000-f7342000 r--p 00002000 08:14 3164720 /usr/lib32/libdl-2.20.so
f7342000-f7343000 rw-p 00003000 08:14 3164720 /usr/lib32/libdl-2.20.so
f7343000-f738e000 r-xp 00000000 08:14 3164721 /usr/lib32/libm-2.20.so
f738e000-f738f000 r--p 0004a000 08:14 3164721 /usr/lib32/libm-2.20.so
f738f000-f7390000 rw-p 0004b000 08:14 3164721 /usr/lib32/libm-2.20.so
f7390000-f7397000 r-xp 00000000 08:14 3164724 /usr/lib32/librt-2.20.so
f7397000-f7398000 r--p 00007000 08:14 3164724 /usr/lib32/librt-2.20.so
f7398000-f7399000 rw-p 00008000 08:14 3164724 /usr/lib32/librt-2.20.so
f7399000-f739a000 rw-p 00000000 00:00 0
f739a000-f74ca000 r-xp 00000000 08:14 17171032 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6.3.0
f74ca000-f74cb000 r--p 00130000 08:14 17171032 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6.3.0
f74cb000-f74cd000 rw-p 00131000 08:14 17171032 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6.3.0
f74cd000-f74cf000 rw-p 00000000 00:00 0
f74cf000-f74d1000 r--p 00000000 00:00 0 [vvar]
f74d1000-f74d2000 r-xp 00000000 00:00 0 [vdso]
f74d2000-f74e1000 r-xp 00000000 08:14 3149261 /usr/lib32/ld-2.20.so
f74e1000-f74e2000 r-xp 0000f000 08:14 3149261 /usr/lib32/ld-2.20.so
f74e2000-f74f3000 r-xp 00010000 08:14 3149261 /usr/lib32/ld-2.20.so
f74f3000-f74f4000 r--p 00021000 08:14 3149261 /usr/lib32/ld-2.20.so
f74f4000-f74f5000 rw-p 00022000 08:14 3149261 /usr/lib32/ld-2.20.so
f74f5000-f7750000 r-xp 00000000 08:14 17171082 /home/milkman/.local/share/Steam/ubuntu12_32/steam
f7750000-f7758000 r--p 0025b000 08:14 17171082 /home/milkman/.local/share/Steam/ubuntu12_32/steam
f7758000-f775e000 rw-p 00263000 08:14 17171082 /home/milkman/.local/share/Steam/ubuntu12_32/steam
f775e000-f7780000 rw-p 00000000 00:00 0
f7acb000-f7c10000 rw-p 00000000 00:00 0 [heap]
ffc7c000-ffc9d000 rw-p 00000000 00:00 0 [stack]
ILocalize::AddFile() failed to load file "public/steambootstrapper_english.txt".
[2014-12-31 00:53:56] Startup - updater built Aug 26 2014 15:35:42
Uploading dump (out-of-process) [proxy '']
/tmp/dumps/assert_20141231005356_1.dmp
/home/milkman/.local/share/Steam/steam.sh: 730. sor: 21607 Félbeszakítva (core készült) $STEAM_DEBUGGER "$STEAMROOT/$STEAMEXEPATH" "$@"
mv: stat ”/home/milkman/.steam/registry.vdf” sikertelen: Nincs ilyen fájl vagy könyvtár
Installing bootstrap /home/milkman/.local/share/Steam/bootstrap.tar.xz
Reset complete!
Restarting Steam by request...
Running Steam on arch rolling 64-bit
STEAM_RUNTIME has been set by the user to: /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime
Installing breakpad exception handler for appid(steam)/version(0_client)
*** Error in `/home/milkman/.local/share/Steam/ubuntu12_32/steam': free(): invalid pointer: 0xf756cf94 ***
======= Backtrace: =========
/usr/lib32/libc.so.6(+0x6b5f9)[0xf71635f9]
/usr/lib32/libc.so.6(+0x71247)[0xf7169247]
/usr/lib32/libc.so.6(+0x71a1d)[0xf7169a1d]
/home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6(XFree+0x1b)[0xf744cefb]
/home/milkman/.local/share/Steam/ubuntu12_32/steam(+0x43c69)[0xf75b1c69]
/home/milkman/.local/share/Steam/ubuntu12_32/steam(+0x44444)[0xf75b2444]
/home/milkman/.local/share/Steam/ubuntu12_32/steam(+0x14d56)[0xf7582d56]
/usr/lib32/libc.so.6(__libc_start_main+0xde)[0xf710fe5e]
/home/milkman/.local/share/Steam/ubuntu12_32/steam(+0x18395)[0xf7586395]
======= Memory map: ========
f4361000-f436a000 rw-p 00000000 00:00 0
f436a000-f436b000 rw-p 00000000 00:00 0
f436b000-f436c000 r--p 00000000 00:00 0
f436c000-f436d000 rw-p 00000000 00:00 0
f436d000-f436e000 r--p 00000000 00:00 0
f436e000-f4381000 r-xp 00000000 08:14 3192088 /usr/lib32/libXext.so.6.4.0
f4381000-f4382000 r--p 00012000 08:14 3192088 /usr/lib32/libXext.so.6.4.0
f4382000-f4383000 rw-p 00013000 08:14 3192088 /usr/lib32/libXext.so.6.4.0
f4383000-f5cb0000 r-xp 00000000 08:14 3171120 /usr/lib32/libnvidia-glcore.so.343.36
f5cb0000-f5cce000 rwxp 0192d000 08:14 3171120 /usr/lib32/libnvidia-glcore.so.343.36
f5cce000-f6935000 r-xp 0194b000 08:14 3171120 /usr/lib32/libnvidia-glcore.so.343.36
f6935000-f6978000 rw-p 025b2000 08:14 3171120 /usr/lib32/libnvidia-glcore.so.343.36
f6978000-f698e000 rw-p 00000000 00:00 0
f698e000-f6992000 r-xp 00000000 08:14 3171128 /usr/lib32/libnvidia-tls.so.343.36
f6992000-f6993000 rw-p 00003000 08:14 3171128 /usr/lib32/libnvidia-tls.so.343.36
f6993000-f6a4b000 r-xp 00000000 08:14 3280595 /usr/lib32/nvidia/libGL.so.343.36
f6a4b000-f6a69000 rwxp 000b8000 08:14 3280595 /usr/lib32/nvidia/libGL.so.343.36
f6a69000-f6a99000 r-xp 000d6000 08:14 3280595 /usr/lib32/nvidia/libGL.so.343.36
f6a99000-f6a9e000 rw-p 00106000 08:14 3280595 /usr/lib32/nvidia/libGL.so.343.36
f6a9e000-f6ace000 rw-p 00000000 00:00 0
f6ace000-f6b05000 r-xp 00000000 08:14 17170998 /home/milkman/.local/share/Steam/ubuntu12_32/crashhandler.so
f6b05000-f6b06000 r--p 00037000 08:14 17170998 /home/milkman/.local/share/Steam/ubuntu12_32/crashhandler.so
f6b06000-f6b07000 rw-p 00038000 08:14 17170998 /home/milkman/.local/share/Steam/ubuntu12_32/crashhandler.so
f6b07000-f6ee0000 rw-p 00000000 00:00 0
f6ee0000-f70ac000 r--p 00000000 08:14 3200236 /usr/lib/locale/locale-archive
f70ac000-f70af000 rw-p 00000000 00:00 0
f70af000-f70b4000 r-xp 00000000 08:14 17171031 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0
f70b4000-f70b5000 r--p 00004000 08:14 17171031 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0
f70b5000-f70b6000 rw-p 00005000 08:14 17171031 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0
f70b6000-f70b7000 rw-p 00000000 00:00 0
f70b7000-f70b9000 r-xp 00000000 08:14 17171038 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXau.so.6.0.0
f70b9000-f70ba000 r--p 00001000 08:14 17171038 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXau.so.6.0.0
f70ba000-f70bb000 rw-p 00002000 08:14 17171038 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXau.so.6.0.0
f70bb000-f70d4000 r-xp 00000000 08:14 17171081 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1
f70d4000-f70d5000 r--p 00018000 08:14 17171081 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1
f70d5000-f70d6000 rw-p 00019000 08:14 17171081 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1
f70d6000-f70f6000 r-xp 00000000 08:14 17171040 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1.1.0
f70f6000-f70f7000 r--p 0001f000 08:14 17171040 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1.1.0
f70f7000-f70f8000 rw-p 00020000 08:14 17171040 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1.1.0
f70f8000-f72a9000 r-xp 00000000 08:14 3149262 /usr/lib32/libc-2.20.so
f72a9000-f72ac000 r--p 001b0000 08:14 3149262 /usr/lib32/libc-2.20.so
f72ac000-f72ae000 rw-p 001b3000 08:14 3149262 /usr/lib32/libc-2.20.so
f72ae000-f72b1000 rw-p 00000000 00:00 0
f72b1000-f72c9000 r-xp 00000000 08:14 3149243 /usr/lib32/libpthread-2.20.so
f72c9000-f72cb000 r--p 00017000 08:14 3149243 /usr/lib32/libpthread-2.20.so
f72cb000-f72cc000 rw-p 00019000 08:14 3149243 /usr/lib32/libpthread-2.20.so
f72cc000-f72ce000 rw-p 00000000 00:00 0
f72ce000-f73ab000 r-xp 00000000 08:14 17171034 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.0.18
f73ab000-f73af000 r--p 000dc000 08:14 17171034 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.0.18
f73af000-f73b0000 rw-p 000e0000 08:14 17171034 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.0.18
f73b0000-f73b7000 rw-p 00000000 00:00 0
f73b7000-f73ba000 r-xp 00000000 08:14 3164720 /usr/lib32/libdl-2.20.so
f73ba000-f73bb000 r--p 00002000 08:14 3164720 /usr/lib32/libdl-2.20.so
f73bb000-f73bc000 rw-p 00003000 08:14 3164720 /usr/lib32/libdl-2.20.so
f73bc000-f7407000 r-xp 00000000 08:14 3164721 /usr/lib32/libm-2.20.so
f7407000-f7408000 r--p 0004a000 08:14 3164721 /usr/lib32/libm-2.20.so
f7408000-f7409000 rw-p 0004b000 08:14 3164721 /usr/lib32/libm-2.20.so
f7409000-f7410000 r-xp 00000000 08:14 3164724 /usr/lib32/librt-2.20.so
f7410000-f7411000 r--p 00007000 08:14 3164724 /usr/lib32/librt-2.20.so
f7411000-f7412000 rw-p 00008000 08:14 3164724 /usr/lib32/librt-2.20.so
f7412000-f7413000 rw-p 00000000 00:00 0
f7413000-f7543000 r-xp 00000000 08:14 17171032 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6.3.0
f7543000-f7544000 r--p 00130000 08:14 17171032 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6.3.0
f7544000-f7546000 rw-p 00131000 08:14 17171032 /home/milkman/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6.3.0
f7546000-f7548000 rw-p 00000000 00:00 0
f7548000-f754a000 r--p 00000000 00:00 0 [vvar]
f754a000-f754b000 r-xp 00000000 00:00 0 [vdso]
f754b000-f755a000 r-xp 00000000 08:14 3149261 /usr/lib32/ld-2.20.so
f755a000-f755b000 r-xp 0000f000 08:14 3149261 /usr/lib32/ld-2.20.so
f755b000-f756c000 r-xp 00010000 08:14 3149261 /usr/lib32/ld-2.20.so
f756c000-f756d000 r--p 00021000 08:14 3149261 /usr/lib32/ld-2.20.so
f756d000-f756e000 rw-p 00022000 08:14 3149261 /usr/lib32/ld-2.20.so
f756e000-f77c9000 r-xp 00000000 08:14 17171082 /home/milkman/.local/share/Steam/ubuntu12_32/steam
f77c9000-f77d1000 r--p 0025b000 08:14 17171082 /home/milkman/.local/share/Steam/ubuntu12_32/steam
f77d1000-f77d7000 rw-p 00263000 08:14 17171082 /home/milkman/.local/share/Steam/ubuntu12_32/steam
f77d7000-f77f9000 rw-p 00000000 00:00 0
f85bd000-f86e2000 rw-p 00000000 00:00 0 [heap]
ffbed000-ffc0e000 rw-p 00000000 00:00 0 [stack]
ILocalize::AddFile() failed to load file "public/steambootstrapper_english.txt".
[2014-12-31 00:53:56] Startup - updater built Aug 26 2014 15:35:42
Uploading dump (out-of-process) [proxy '']
/tmp/dumps/crash_20141231005356_1.dmp
/home/milkman/.local/share/Steam/steam.sh: 730. sor: 21701 Félbeszakítva (core készült) $STEAM_DEBUGGER "$STEAMROOT/$STEAMEXEPATH" "$@"
Finished uploading minidump (out-of-process): success = yes
response: CrashID=bp-b95bb22f-5940-4072-a44b-d12362141230
Finished uploading minidump (out-of-process): success = yes
response: CrashID=bp-92a13e6f-1f5a-443f-b461-aa79b2141230
sry for the hun locale, i'll set it to english if you guys need it. it mostly says "interrupted" and "unsuccesful" at places.
Last edited by wootsgoinon (2014-12-30 23:55:16)

It seems indeed to be the locale. I have set en_DK.UTF-8 and what worked for me was running steam with a different locale, namely en_US.UTF-8.
LANG=en_US.UTF-8 steam
I got the idea here, but did not want to change my locale permanently.

SNP Optimizer run ends with error: Error when determining Customizing data

Hi All
Can you help please what settings are missing: SNP optimizer run canceled with error "Error when determining Customizing data".
Thanks
Best Regards
Andrey

On integration tab of SNP optimizer profile,
maintain 'regard as customer demand' for both dependent demands and distribution demands for fixed orders.
By default it is 'regard as hard constraint' which should be changed.
bye,
Nitin Thatte

Usb game controller compatible with arch

I just rediscovered mupen64 and snes9 and was wondering if anyone could recommend a good usb controller that will run easily with arch. I never got mupen64 working well enough in leopard to warrent buying a controller before. I've been looking at
this:
http://www.newegg.com/Product/ProductRe … 6826127209
or this:
http://www.newegg.com/Product/Product.a … 1682612720
any other suggestions/confirmation that either of those works well.

I'm using a Logitech Dual Action Gamepad right now and it works perfectly. I'm not really playing any games on Linux at the moment but I do fancy myself a game programmer so I test the stuff I'm working on with this pad.
I agree with the above posters that "PC" controllers seem to always lack the quality of "console" controllers. I went to a local Gamestop to buy a "wired" Xbox 360 gamepad but they told me they didn't have any and Microsoft isn't making them anymore. So, I bought the Logitech gamepad and I'm pleased with it. It doesn't seem to be of low quality at all. I am glad in a small way that I bought it instead of the Microsoft gamepad because I prefer not to support Microsoft if I can find a suitable alternative. Kind of like why I use only Linux .

Using different versions of libs with certain programs

This has been something bugging me for a while now in Arch, but up til now not enough to start trying to find a solution.
What is going on is that I have a variety of programs I would like to run from /home/usr_name/software which is the dir where I stick stuff I don't want/need to install. A lot of programs in this category come with their own versions of libs that differ from those I often have installed elsewhere in the usual places. The problem I run into is that Arch always prefers the installed libs over the ones found locally in the programs own dir tree.
Is there something I can do to change this default behavior, or at least something I can add in the terminal each time I run one of these programs to force it to look where I want it to for the local versions of the libs?

Thanks Allan, I'll give that a try in a bit.
Got a little side tracked as the UPS guy showed up with my new graphics tablet shortly after I made that post.
Once I look into it and try it out on a few things I will come back and update how it went and mark this solved.

Right-click on a VI with missing dependencies hangs LabVIEW

Here's the flow:
1) Download a VI from the forums that has a missing dependency
2) Add the VI to a project
3) Right-click on the VI to see if it's set to run-on-open
4) Wait a very long time for the dependency load to fail
How do you all handle the forum VIs? Is it as simple as checking the Files view for missing deps - and only RMB if none are missing?
I can't find any of the "silently ignore all" posts/ideas except for opening refs.
When I create new VIs and force a dependency failure, there is not a long delay.

How do you tell if the VI is set to Run When Opened? If you are opening the properties dialog, the VI still has to load.
***Just performed an experiment***
Opening the VI from the project overrides the Run When Opened. Good thing to know.
But still, when you try to open a VI and there are missing dependencies, you get a dialog that has the Ignore All on it.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Loading Window.PNG ‏23 KB

Overwriting Dev and Stage DB's with Production creates Missing Dependencies

When I refresh my Dev and Stage environments by restoring the DBs with those from Production, I get numerous Missing Dependency errors.
We have lots of custom WSPs, and I think that the cause is that the production WSPs are overwriting those in the other environments without first retracting/deleting them.
Is there a way to restore without creating these errors?
Thanks,
Scott

if the custom WSP is deployed as a sandbox solution, then it'll be included in the content database refresh.
the missing dependency stuff is all about finding GUIDs that SharePoint can't resolve... whether that's a web part or a feature.
The retraction/deletion process doesn't actually clean up contents in the content database (web parts in use, etc)... it just handles the synchronous deployment of the feature between servers. So regardless of how a custom WSP is deployed/updated/etc, missing
dependencies can happen.
The question you need to address, is tracking down the missing dependencies, and determining whether they are still in use in PROD (perhaps the component was removed, but the web part still exists on a page), and if so making sure it's also available in
DEV/TEST... assuming it's necessary... if a web part isn't available in DEV/TEST, maybe it doesn't matter, and maybe the missing dependency isn't an issue.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Firefox crashes or runs but with splotches missing color, how do i fix it?

when I start firefox my desktop starts flashing on and off and when it returns there are splotches missing color. firefox then either crashes or runs but with the colors muted and images distorted.

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

Yaourt failed to install missing dependencies. then fail md5

[billytcf@dynames ~]$ yaourt -S aptana
==> Downloading aptana PKGBUILD from AUR...
==> Last 5 comments ordered by date (asc):
I deleted the comments here
==> aptana dependencies:
- firefox (package found)
- libstdc++5 (already installed)
- j2re (package that provides j2re already installed)
- unzip (already installed)
==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
n
==> Continue the building of 'aptana'? [Y/n]
==> ----------------------------------------------
==>Y
==> Building and installing package
==> Making package: aptana 1.0-1 (Wed Apr 23 14:53:31 UTC 2008)
==> Checking Runtime Dependencies...
==> Installing missing dependencies...
Password:
error: several packages provide j2re, please specify one :
jre icedtea6
==> ERROR: Pacman failed to install missing dependencies.
Error: Makepkg was unable to build aptana package.
I have jdk and jre installed by pacman but still have this prob.
So i cheated, edited pkgbuild remove all dependencies, then
==> aptana dependencies:
- unzip (already installed)
==> Continue the building of 'aptana'? [Y/n]
==> ----------------------------------------------
==>
==> Building and installing package
==> Making package: aptana 1.0-1 (Wed Apr 23 15:04:37 UTC 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found Aptana_Studio_Setup_Linux.zip in build dir
-> Found aptana.desktop in build dir
-> Found aptana.png in build dir
-> Found _aptana in build dir
==> Validating source files with md5sums...
Aptana_Studio_Setup_Linux.zip ... FAILED
aptana.desktop ... Passed
aptana.png ... Passed
_aptana ... Passed
==> ERROR: One or more files did not pass the validity check!
Error: Makepkg was unable to build aptana package.
tried downloading the file for a few times but still fail md5
May I request help here??
thanks everyone!!
Last edited by billytcf (2008-04-23 07:02:50)

It's quite simple. When the AUR package was created, the current version of Aptana was 1.0, but the source url links to the latest version. This was all ok until they released version 1.1 because then you suddenly have a completely new file that gets downloaded and because of this is will fail the md5 check.
It's very simple to fix though, in one of two ways. Either just delete the md5sum=() array (changing pkgver=1.0 to pkgver=1.1 would also be a good idea), or download the PKGBUILD and in the same directory as you store it just run makepkg -g and replace the md5sum array with the resulting data (this would be the best way to handle this...).
Last edited by Dirhael (2008-04-23 11:17:05)

Cisco PacketTracer missing dependencies. [Solved]

Hi,
So I was going to install packet tracer. I followed the tutorial in the wiki section. <a href="https://wiki.archlinux.org/index.php/PacketTracer">PacketTracer</a> Which seems a little thin I got to the part makepkg. here is the out put of what I did.
[ofce@myhost packettracer]$ makepkg -s
==> Making package: packettracer 5.3.2-2 (Sat Jan 14 13:05:39 CST 2012)
==> Checking runtime dependencies...
==> Installing missing dependencies...
Password:
error: target not found: lib32-libpng12
==> ERROR: 'pacman' failed to install missing dependencies.
[ofce@myhost packettracer]$
Any idea on how to get this working? I would like to get my assignments done for my cisco classes
Last edited by mich04 (2012-01-14 21:22:53)

# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - -f %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
#CheckSpace
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist
#[multilib]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Here it is, when I run pacman -Syu I only see core, extra and community.

Setting up Steam on Arch worth the time? Better use Ubuntu/SteamOS?

Hi,
I'm just wondering whether I want to invest as much time as it seems to cost to get games running on a 64 bit machine with Steam on Arch.
Should I just grudgingly set up a Ubuntu/SteamOS install? Would that actually be a lot easier? Is that actually a thing now?
What's your experience? Is it very much pain on Arch?

Right, I guess I'll be "That Guy:" The only person who can really answer the OP's question is the OP, given the vagaries of personal hardware and software configurations. What works on my machine with my OS configuration may not work on the OP's. Besides, as Awebb mentioned, SteamOS is going to be carefully crafted to work in a particular way, while Arch leaves it all up to the user. All anyone can say---or has said so far---is that it works for them.
The Steam runtime is self-contained; if you're running a 64-bit system then the Arch wiki page on Steam can walk you through installation, which consists of Steam and its dependencies (managed by pacman) and the 32-bit package for your graphics driver. In almost all cases the libraries needed for the games to run, as well as the client itself, are installed to ~/.steam and ~/.local/share/Steam, and Steam handles its own updates without touching the rest of the system. Just install Steam on Arch and give it a go. If it turns out using SteamOS works better, then just follow the wiki page in reverse to uninstall the packages on Arch, and delete the aforementioned directories. It only takes a minute to remove all traces of Steam itself.
Games' data are another matter, though. Some save data to ~/.local/share/*, others to ~/.config/*, others to ~/.*, but every game I've played via Steam saves data to a directory with an obvious name (like the title of the game or name of the publisher).

First time with Arch, minimal build: little niggles [solved]

Ok, I've been using *Buntu based Distros for a while now, this is my first time taking the plunge with Arch - chosen because it is a build in what you want distro.
I've wanted a minimal build install for a printserver project, this week I took the plunge with an old laptop.
I have it doing the printserver part, but there are some minor niggles. Let me detail what I have installed and what I want it to be able to do, before I detail these.
Arch Base install with:
CUPS
LXDE
Leafpad
Xorg Intel video drivers.
smartmontools
firefox
WPA_Supplicant,as this system is to be a wireless printserver.
What I want this system to do:
Run most of the time in shell, no DE running. (This keeps it cool and quiet, as it is in a bedroom)
Only run the DE when startx is called, and have the DE able to be shut down without restarting the server.
serve printjobs from the moment it boots and connects to the wireless.
What it currently does.
Boot up, wait for login
When login, require WPA_supplicant, dhcpcd and Cupsd to be initialised before it can serve printjobs.
If DE is required, Xorg must be started in tty1, startlxde ran in tty2, and then manually switch to tty7 for the DE.=
I have a script to call when i login which starts WPA_Supplicant, dhcpcd, and cupsd in that order.
I would really like the interface to have a staticip but i dont know how to do that without the handy graphical tools that ubuntu provides.
Please can you help, at least point me in the right direction with these niggles? I have learned a lot about what is required to get a basic DE up and running, and im sure with your help I will learn more.
Last edited by Rhiadratech (2011-05-20 23:07:52)

Ok, so I've gotten Cups and wicd autostarting, set the static ip from my router because else it wasnt getting DNS etc details and left it asking for that by dhcp.
Still having issues with the DE
pedro_sland wrote:
If DE is required, Xorg must be started in tty1, startlxde ran in tty2, and then manually switch to tty7 for the DE.
I run xfce4 sometimes. I just run startxfce4 and it starts Xorg and displays the DE. I think that startx runs twm which you probably don't want so you might want to take a look at that. startx has a script it runs somewhere (I forget where but the wiki will know). When I'm done with xfce I just log out and it exits.
For me, this isnt working. startlxde on its own just goes to
[root@yomiko ~]#
in tty1, and leaves me with a blank screen when i switch to tty7
I literally must call Xorg in one tty, startlxde in another and then manually shift to tty7 to see it.
startx itself:
-bash: startx: command not found
Even Xorg isnt happy being called on its own, that too goes to a blank screen, though it does at least switch to tty7
With Xorg called in tty1, when i call startlxde in tty2 i get dbug errors from pcmanfm though these seem to be just it informing its detected the HDD partitions.
there is a grumble early on in the process, before the debug errors, saying:
Importing pynotify failed, notifications disabled.
Finally, I did add the line to .xinitrc the LXDE page in the wiki said to to allow startx to run:
exec ck-launch-session startlxde
This is the only line in this file.
Currently running as root... I'm not going to complicate matters by adding a user until im sure i got it all running as root, bad practice or not!
Edit: A friend helped me solve it.
The package xorg-xinit held the startx script that was missing. I now get LXDE when i want and only when I want.
Last edited by Rhiadratech (2011-05-20 23:09:16)

Missing dependencies to run steam with arch provided versions of libs

Similar Messages

Maybe you are looking for