Missing desktop connectivity service in my BB 8320

I am not able to connect my 8320 via bluetooth to the desktop. After searching in the forum, I found a very detailed procedure (KB04132). The precedure indicades that the bluetooth options in the blackberry should have desktop connectivity service selected. When I review the options I found my 8320 does not have that option to be selected.
How can I get that option back?
My BB is a private phone not connected to an enterprice system. I have a laptop with Windows Vista SO. I was able to connect a BB bold to my computer using bluetooth following the procedure described in KB04132.
Any help can be much appreciated.

Hey hansthieryt,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Can you send me a private message with your PIN number so I can investigate further?
Thank you.
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

Missing Desktop CICAL service book

I have a Canadian Rogers Torch 9180, software 7.0.0.254, platfirn 5.0.0.451, available KB 167173.
The phone is activated on our cloud Blackberry Administration Service with Exchange 365 and for some reason the CICAL service book is missing on the device so any calendar invites are blank. I have followed BB article KB10594 and on the BAS tried resending the service books. On the device properties it does say that the last transaction was delievered and nothing I can see has failed. Obviously since the CICAL book is missing I am unable to delete and undelete it as per the KB article.
We only have one default IT policy and others are on it without any issues. And yes I have double checked that nothing is disabled in the PIM sync in the policy. We do not have any Groups setup, everyone is under the default group.
Not using any other calendar apps on the phone. In the BAS it does say that the Wireless calendar is Disabled but there's no way I can see in the BAS to enable the calendar.
I've searched the forums and google and found nothing that has helped so I'm hoping someone has a suggestion. I have not tried removing the device from BAS and reattaching it as I've had bad luck doing this with other devices in that I can't get them back on BAS after it's been removed.

try this
Wireless calendar synchronization appears to be disabled on the BlackBerry smartphone
also
Clear the BlackBerry smartphone Calendar and then turn on calendar wireless synchronization from the BlackBerry smartphone by completing the following steps:
On the BlackBerry smartphone, open the Calendar.
Open the Calendar menu and select Options.
Type the following command:
rset
Choose Yes when prompted by the following question: "This will erase your Desktop calendar, and reload it from your server. Continue?"
Under Calendars, select Desktop.
Verify that Number of Entries is zero.
Change Wireless Synchronization to Yes.
Exit and save changes.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Missing cbclient.h - Remote Desktop Connection Broker client API

Hi,
I am searching for cbclient.h, which is referenced in the "Remote Desktop Connection Broker client API" documentation:
msdn.microsoft.com/en-us/library/hh769100/
However, I could not find cbclient.h in any Windows SDK (I searched in the Windows 7, Windows 8, Windows 8.1 SDKs).
I found a question on these forums from 2012 asking for the same thing, but there is no public answer:
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/9b51f493-2b32-4feb-a62b-bc74aa163460/remote-desktop-connection-broker-client-api-headers?forum=windowssdk
Where is cbclient.h, and why is it missing if it is referenced by the public documentation?
Thank you!

Did you ever get a response?

Bug report: Under Remote Desktop Connection, local units and resources menu has OK button missing

I've noticed that the "Local units and resources" in Remote Desktop Connection is missing an OK button. It seems to be a localization issue because I changed my Windows profile language to English, logged out and back in again, started RDC and
the Ok and Cancel button became visible. Changed my language back to Norwegian again and the buttons are gone again.
I have also confirmed this by testing the same on a clean new installation.
Temporary Work-around: Select an option, press tab-key once (it will select the OK button which you cannot see), then press Enter.

Hi,
Based on my test,I got the same result.
Thanks for your feedback.
We will submit this issue to Microsoft product team.
Regards,
Kelvin Xu
TechNet Community Support

Remote Desktop Connection with WRT54G from Novice

Well, I’m usually pretty good at using Google and forums to eventually figure out how to fix my problem but this one absolutely has me stumped and I’m hoping someone out there has an answer for me. For the record, I have probably a beginner/intermediate knowledge of computers so if you know the answer to my problem, try to explain it simply! ****TO ANYONE WHO TAKES THE TIME TO READ THIS THING AND CAN OFFER SOME ADVICE-THANK YOU!!!!***
THE PROBLEM
I would like to be able to use Remote Desktop to log into either of my home computers from basically any computer on the internet.
THE SETUP
I have two computers, whose names are LAPTOP and DESKTOP that are both running Windows Vista Ultimate. Both of the computers are connected to a Linksys WRt54G Router ; one wired, the other wirelessly. The Linksys router is then connected to a Westell DSL Modem that connects to AT&T’s internet service.
SETTINGS
My DSL service only provides me with a dynamic IP address so I signed up with no-ip.com. Through that site, I bought a domain name and downloaded their small program that runs in the background of my desktop computer. The program checks what my IP address is every couple of seconds and if it changes, it notifies their server so that anyone who types in my domain name is directed to the new IP address.
ROUTER (Firmware 4.20.6)
Basic Setup Page: The Router Name is just the model number, the Server Name is my DSL provider and the Domain Name is the name I chose and registered with No-IP.com. (www.mydomainname.com, for example.) DHCP Server is ENABLED. DDNS Service is DISABLED. Under Advanced Routing, it is set in GATEWAY mode.
Security Page: Firewall Protection is ENABLED. Block Anonymous Internet Requests is NOT checked. Filter Multicast, Filter Internet NAT Redirection and Filter IDENT ARE checked.
Applications and Gaming Page: I chose two port numbers, one for each computer that I want to connect to. On the first line, I have Application: RDP, Port Range: 49200 to 49200, Protocol: Both, IP Address (The IP address of the computer I want to connect to) and the Enable box IS checked. [I did the same thing with the second line for the other computer, but with a different port number and that computer’s IP address)
Administration Page: Access Server is HTTP, Wireless Access Web is ENABLED, Remote Management is ENABLED through Port 8080, and UPnP is ENABLED.
WINDOWS VISTA SETTINGS
First, I went to the Remote Desktop Settings of the target computer and ENABLED Remote Desktop Connection and allowed computers running any version of Windows. I also confirmed that the box labeled “Allow This Computer To Be Controlled Remotely” WAS checked. I then made sure that I had a user name, it had a password associated and that it had Administrator priveledges. I went back to the Remote Connections screen and added the user name as being allowed to connect. (I think this is redundant since it’s both the owner of the computer and has Administrator Status.)
Next, per Randomly Googled Internet Advice, I went into the registry and changed the port number that Remote Desktop listens for incoming connections to Port 49200 to match the router settings. [Registry Entry that I modified was: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\WinStations\RDP-Tcp]
Finally, I went to the Windows Firewall and Added (opened) port 49200 for use as a Remote Connection. I kept the protocol as TCP and confirmed the scope was set for Any Computer.
CURRENT STATUS
If I go to Explorer and enter my IP address with a colon and the specify port 8080, I can get the login screen for the router. Same thing happens if I just enter my domain name and port 8080. However, if I switch the 8080 port and use one of the ports I chose (49200), it cannot connect, either using the Public IP address or the domain name. (I’m trying to connect using a wireless card and not connected to my local network so I know it’s the same as if I was anywhere else.)
I’m not sure why it won’t let me connect; it feels like the router will not allow the connection to pass through it to the port I’m asking it to forward to. I’m guessing someone out there who took the time to read it is shaking their head at all the information I provided and knows the one dumb thing I missed!
Thanks again!

I'm attempting to do the same thing with my home network. the only differences are that i have cable internet from comcast and i'm running vista business. my router is the wrt54gs. i'm assuming that the web page is similar for adjustmants. To be honest i cannot figure out how to do a remote destop too. so i went to www.logmein.com and installed the program. once installed to to every computer you want to have access too and log into the website. then click on the add computer icom. full control app sharing etc... even better when you connect you have the option to deactivate the local host mouse and screen to prevent anyone seeing what your doing.
If you resolve the router issue would you let me know. plz thanks
Forest

Remoteapp and Desktop Connections Self signed Cert

I know there are similar post on this subject though I did not find the answer that I was looking for. I am using rdweb services to publish applications over a WAN connection to our remote office as our SQL server applications reside in our main office.
Both offices are on the same domain/network. I do not need rdweb services to be accessed via the internet to outside users so I am relying on the internal cert to make all of this work internally. At this time the rdweb interface works fine but the remote
office would like to utilize the RemoteApp and Desktop connections so they will not have to use the web interface but I get the same error message everyone else has posted about there being a problem with the certificate and I am not able to get any further
in the wizard at this time.
I have created my own self signed certificate via the Remote Desktop GUI, exported the cert and imported to my client PC but still it does not work. I don't have alot of experience with the certs and possibly am doing something wrong so will give the
info to see if someone can help me out.
Server name: TS1
Domain: coa.local
I have created the certificate several times with the following: ts1.coa.local, *.coa.local. Once done I have exported the cert and imported to the Trusted root auth of the local computer. I have then launched the Remoteapp and Desktop wizard and filled
in the field with https://ts1/rdweb which did not work. I tried https://ts1.coa.local/rdweb which also did not work. Am I not filling in the correct syntax or is there something else I might be missing as it stops there and tells me there is a problem with
the websites certificate. I am stumped and hope someone can help me out as I have burned alot of time trying to make this work.
Thank you

Have you made any progress on this problem?

Remote Desktop Connection Manager can only open 6 sessions at a time on Server 2012

I am only able to open, and view thumbnails, for a maximum of 6 RDP sessions on my Server 2012 box at a time in Remote Desktop Connection Manager (RDCM). If I add more sessions I just get a variety of connection errors for the additional sessions. If I activate
a 7th session one of the existing 6 sessions goes off-line with a connection error message. Sometimes the error says 3334, sometimes the error says 0x8345000E, and sometimes it just says there is a connection error.
I have checked Group Policy on the server to ensure I don't have any settings restricting the number of RDP sessions.
In fact, I will often have 30 or 40 RDP simultaneous sessions opened, I am just not able to view them all in RDCM. I have seen reviews of RDCM with screenshots showing dozens of thumbnails so it seems to be something that's possible to do.
Are there any settings I should make on the server to allow RDCM to connect to more than 6 simultaneous RDP sessions?
Just to be clear, all these RDP sessions are running on the same server. Also, I am just using the trial license for Server 2012 and Remote Desktop Services right now. I don't think that should have an impact, but I wanted to be thorough.

Thanks Jakub for "corflags" info.
Unfortunatelly it doesn't work because running mRemoteNG.exe process in 64bit can't load MSTSC ActiveX component (referenced assemblies) because original files were assembled from 32bit dll [mstscax.dll]?
Error message when making RDP connection:
Could not load file or assembly 'Interop.MSTSCLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. An attempt was made to load a program with an incorrect format.
I was able to create new AxInterop.MSTSCLib.dll and Interop.MSTSCLib.dll assemblies from 64bit dll version and now it works with "AnyCPU":-)
http://www.filedropper.com/axinteropmstsclib-mremoteng
Using AxImp.exe and TlbImp.exe didn't worked for me because it creates assemblies in wrong namespace "MSTSCLib" instead of "Interop.MSTSCLib" (AxImp.exe) and TlbImp.exe for changing namespace generated many "marshaled errors"
so final .dll wasn't working.
Adding MSTSCAX.dll reference in Visual Studio directly created correct and functional assemblies. Who don't know how to create 64bit compatible assemblies or don't have Visual Studio, feel free to check linked file.
Hope it helps
P.S. Sorry for possible technical misinterpretation, I am not programmer so creating new assemblies was trial-error process...

HP LaserJet Pro MFP M127fn and Remote Desktop Connection

So, my pc operates on Win7-64bit. I use Remote Desktop Connection to log in to the company server, running on MS Server 2008. I purchased the HP MFP M127fn today after confirming that it is compatible with both OS listed above. I successfully installed it directly to the server via usb cord - to make sure the correct drivers downloaded to the server. I was able to test-print and print from an app while physically connected to the server. I then disconnected the printer from the server and successfully connected it to my local pc. I can test-print and print from an app on my desktop. When connect to the server via RDC, it recognizes the MFP M127fn as my default printer, and sends a print job to my local pc. I can see the job in the server print queue, I can see the print job in queue on my desktop....it spools, then says it prints, however no actual print job ever materializes.
If I select to print to the MFP M127fn fax from the server, it will open the fax window on my desktop, allow me to enter a phone number, and will dial out and send the fax. So, that driver is functioning properly.
So, my question is this: If the printer and fax claim to be successfully installed, why do I not get the print job that is sent via the server and appears in my local print queue? I get no error, either on the server side or the local desktop. They both truly think the job has printed.....but no paper ever comes out.
Our company has used several other HP printers over the years with this same set-up and have never had a problem until now. The last one was also an HP MFP - the CM1312. So, I am now completely stumped by this. I called HP support and was routed through 4 different areas before I was told that no one had a clue what the problem might be. I then called the Easy-Tech desk at Staples, where I bought the printer, and was told that it was most-likely a hardware issue and I should return the printer to swap it out for another one. If nothing would print at all, I would agree it's hardware. But, as I can print locally, I'm more-inclined to think it's driver-related......any suggestions?

Hi,
The M127fn uses the PCLmS printing language which is a lightweight printing language, a such is not supported for RDP printing.
As a reference you may find the following socument about Citrix, Terminal Services and RDP Printing, as you may find listed the M127 is not supported for a such:
http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4aa0-8465enw&404m=secure-erc
That is clearly not an harware issue, however I suggest returning the printer and replacing it with a different model which better feet such a task.
The M225dn as an example uses a PCL 6 print driver and should provide a better feet for RDP printing using HP UPD.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can 1 instance of Windows 8.1 ENTERPRISE host multiple Remote Desktop connections?

I am shopping for the components for building a machine with fair, high-performance hardware. I have Windows 8.1 Professional. I wanted to know if either Windows 8.1 Professional or Windows 8.1 Enterprise can support multiple remote connections
from users outside the local network. For example, my brother is based in San Diego, CA and has an underpowered laptop. Is there any way to make a remote connection over that much distance, from San Diego to Northern Virginia, from a RDP client running Windows
8.1 Professional to a RDP "server" Windows 8.1 Professional/Enterprise machine, and run a modern, single- or multiplayer- game over smoothly that connection? At the very least, is it possible to run common
apps (e.g. Microsoft Office 2013 IE 11, Adobe Acrobat XI) smoothly on a Windows 8.1 Pro RDP client connected to a Windows 8.1 RDP "server" located 2250+ miles away?
Would upgrading my installation from Professional to Enterprise improve the responsiveness and display quality for my remote users?
I know Windows Server R2 2012 has features specific for handling remote connections, but I am trying to keep a Windows 8.1 user experience. Still, if anyone can show some evidence that Windows Server 2012 R2 Remote Desktop Services (RDS) improves display
and responsiveness over long-distances for remote (RDS) connections, then I will shop for Windows Server 2012 R2 Standard instead. The huge drawback of Windows Server 2012 R2 Standard CALs is the enormous cost to enable 3-5
remote connections for family, non-commercial use.
Has anyone attempted to host long-distance remote access, non-commercially, for 3-5 connections? Has it worked well? What, in general, is required?
T. Webster

Hi,
It depends on the quality of the network connection to run the software smoothly throuth RDP. And I don't think the quality would be better if you upgrade to Windows 8.1 Enterprise.
Windows 8.1 allow only one session of RDP, the Remote Desktop Server in Windows other than the Windows Server edition has a limitation to allow only one concurrent user per session by default, i.e. if someone remotely connects to the computer over RDP then
whoever was logged in at that moment will be automatically logged off, even if that user is physically present at the computer. This is by design.
Regarding more information about RDP, please take a look at the following articles:
Remote Desktop app help
Remote Desktop Connection: frequently asked questions
Best regards
Michael Shao
TechNet Community Support

Remote Desktop Connection and printing issues

Hi,
I am using Windows 7 on my desktop and also connected to Windows Server 2008 R2 to run applications in Windows Server. However, I noted there is problem with the printer issues. Sometimes, when I tried to print some documents using applications
in Windows Server with my local printer in my room connected to desktop, it won't work.
Moreover, I need to go to Windows Server, Component Service to restart printer spooler so it will work again. This is a pain.
I also noticed there is about 30 seconds wait to process any document to print.
Unlike if I print documents directly from my local desktop computer running Windows 7 and connected to local printer, it only takes seconds to print.
My desktop is connected to Windows Server 2008 via local area network. I should not expect such a significant delay in printing.
I also wonder why printer spooler needs to be restarted when printer is not working.
Can anyone advise me about this? Can Microsoft looks into this problem and release updates to fix the bug to improve the system?
Thanks
Regards,
Clement

Hi,
Please check if you turn on this settings:
You need to set this up just before you connect. The setting will be saved so that you won't need to change it the next time you connect.
1. Open Remote Desktop Connection by clicking the Start button, clicking
All Programs, clicking Accessories, and then clicking
Remote Desktop Connection.
2.Click Options, and then click the Local Resources
tab.
3.Under Local devices and resources, select the Printers check box.
4.Click Connect to start the session.
Make sure that you select your printer in the Print dialog box each time you print.
Karen Hu
TechNet Community Support

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Server 2012 R2 Remote Desktop Connection Broker

I have installed RDS on a server named PLUTO on which Windows 2012 R2 datacenter is in. There is a domain controller (domain name: AGROSY) running on a Linux server. We have used Samba 3.6.6 to control the file sharing system.
When I attempt to install RDS in Server Manager, it states as following: could not retrieve the deployment information from RD connection broker server pluto.AGROSY.
Then, I searched a lot of solutions, e.g. and tried as following:
Enter-PSSession -ComputerName pluto --> which works;
but Enter-PSSession -ComputerName pluto.AGROSY --> which gives the error message as: Enter-PSSession : Connecting to remote server pluto.AGROSY failed with the following error message : WinRM cannot process the request. The following
error with errorcode 0x80090311 occurred while using Kerberos authentication: There are currently no logon servers available to service the logon request.
If I ping the pluto.AGROSY, it works as well.
I have no idea how it can be solved, please help me out. Thanks a lot!

Hi,
Thanks for your comment. Sorry for late reply.
Initially please enable the PowerShell remoting in your case.
Enable-PSRemoting
http://technet.microsoft.com/en-us/library/hh849694.aspx
For FQDN name, please see that RDCB is properly configured and also certificate which you have used for RDS environment must be trusted with its private key and must match the FQDN name of the server. Did you seen the certificate has been properly used and
configured. You can go through following article for certificate and also for configuring RDCB role.
Configuring RDS 2012 Certificates and SSO
Configuring HA for the Remote Desktop Connection Broker in a 2012 RDS Farm
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Server 2012 RTM Remote Desktop Connection Broker Role Won't Install

Hey guys,
I have been searching for and trying fixes for this for 3 days, and I've gotten no where. Thanks in advance for trying to help me out.
Here's the situation:
I have a brand new installation of the Windows Server 2012 Datacenter 64-Bit RTM from MSDN. This is my one and only server (just my personal one for home), so I'm using this single server to run all of the services that I need. After a fresh
installation, I added the AD and DNS roles and promoted the server to the PDC. Then I go to add the Remote Desktop Virtualization Services (the VM virtualization role). The installation fails, but I can't find any explanation as to why.
I've wiped out the OS and reinstalled from scratch at leat 15 times, trying various combinations, fixes, approaches, etc. including powershell, Remote Desktop Services Deployment, standard role-based deployment, etc.
Using the role-based deployment, I can get every 'Remote Desktop Services' component to install except the Remote Desktop Connection Broker. I've tried enabling RDMSUI_TRACING, but didn't get any information at all as to why it's failing. I also
cannot find RDMSDeploymentUI.txt log.
I've also tried to deploy this using Powershell using this command:
New-SessionDeployment [-ConnectionBroker] <string> [-WebAccessServer] <string> [-SessionHost] <string>
That particular item does provide some error messages, but they seem to complain about the Session Host not being able to install due to not being able to find the connection string key in the registry for the Windows Internal Database. However, I can
get the session host and every other component to install using role-based deployment, except the Connection Broker.
I've run an SFC scan, which found no issues. I've also tried applying the one update available in Microsoft Update, and tried it without applying that update (reinstalling between attempts of course).
I'm completely at a loss. Has anyone encountered this before? Any suggestions would be greatly appreciated. Is there a powershell command for just installing the Connection Broker that might provide some additional error information, or any
information at all?
I would greatly appreciate any help anyone could offer. I'm willing to try anything. Thanks for taking the time to read this.
Sincerely,
Dominick

Also Found this:
1. You try to install the Remote Desktop Connection Broker (RDCB) on a server that also has the Active Directory Domain Server (domain
controller) role installed. This configuration is not supported by Microsoft. You need to install the RDCB on a server that does not have this role installed. See: Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012 http://support.microsoft.com/kb/2799605
2. If you don’t have the Active Directory Domain Service install, this issue might be caused by the Windows internal database (WID) that
the connection broker installs and the Windows Update KB2821895. If you have KB2821895 installed, unfortunately you can not uninstall this KB. Try to install the Remote Desktop Connection Broker (RDBC) role on a server that does not have this Windows update.
Note: There is currently no official communication from Microsoft that here is an issue with RDBC and KB2821895. However, try the RDBC installation
without this KB and see what happens.
For more information, Refer below link...
http://fabrikam.wordpress.com/2013/07/15/connection-broker-installation-failedremote-desktop-deployment-issues/

Remote Desktop Connection Server 2012 Clients only using on DC as Logon Server.

I am using Server 2012 and have an RDC Server running on a VM. Originally I had ordered the licensed version as Essentials was provided to me which does not allow for a full domain environment, which is required for the RDC server. Anyway, I
used Eval versions to get started, not thinking or realizing that the DC would never be able to get Activated since it is an Eval. So after 4 days I have finally, loaded Server 2012 on a new VM, promoted to DC, Transferred FSMO roles...DNS is up and
replicating across both DC's. The Eval keeps shutting off and was going to demote it and remove, but whenever it is shutdown the Clients receive a "No Logon Servers are available " error. I start up the old DC and it works. I doublechecked
all of the roles have been moved, I checked the RDC gateway, everything points to the same Domain information, but when I check an account using 'CMD set' it shows the old DC as the Logon Server. Is there something I am missing in the RD Gateway or somewhere
else. Is there a way to force it to use the new DC? I have tried setting the options in remote desktop connection to use a particular TS Gateway setting and it doesnt seem to work. Can someone please help me think about this and offer a
suggestion or let me know if you need more info. I can figure nothing else out at this point.
Thanks so much in Advance.
-T

it sounds like your clients / rdc servers may still be pointing to the old DC for DNS.
Can you check you have updated DNS on the clients to talk to your new domain controller.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
The new DC is the only DNS server listed on the RDC Server and is the only DNS listed for the clients other than the gateway which have as a secondary. If I change the static on the old DC I cannot login, as soon as I put it back, I can login and it
shows that DC as the logon server.
I did a simple recursive test on both DNS servers....The new Domain Controller passes, the Old One which I am trying to remove, does not.
I will reply with any other updates as I continue to look into this and thanks for the suggestions.
So I also Pinged the domain from the RDC Server as suggested and it replies back with the old DC IP.
Not sure why.

Remote Desktop Connection keeps disconnecting

I have BT Hub 3 (recently upgraded to Broadband Unlimited at the end of Jan 2015).
Up until recently I was able to Remote Desktop into my work computer (via VPN tunnel) with no problems at all.
Around March 6th, I began to experience problems with the Remote Desktop Connect (RDP), in that it now makes an initial connection and then disconnects (typically within a few seconds, occasionally after a couple of minutes).
It will then cycle through a number of reconnection attempts, all with the same result, before it finally drops altogether with the message:
'The Remote Desktop Services Session has ended. Connection to the remote computer was lost, possibly to network connectivity problems'.
I have tried restoring both machines back to a date when i know the connection was working - no joy. I've also tried deleting an re-creating now VPN and RDP connections - no joy. I've researched online and tried various other things, but still have the same problem.
I've tried connecting using a laptop (via my wirelss connection) with the same result. My manager has RDP'd in from his home machines and has had no problem at all.
This leads me to consider whether the problem is with the router/BT Hub itself. I've tried the online diagnostic tools with no resolution to this problem.
Has anyone else experienced the same problem?

Oh well, I suppose that after more than 2 months of frustration with this issue, the BTCare Community is unable to help me.
I can be fairly sure that it's not my machine as it's also happened using a laptop, plus I've even reset my PC right back to its original factory state just to sure that nothing had become corrupted.
The network guys where I work have also looked at this and can find nothing at that end to cause this problem.
I've even borrowed another BT Hub and tried it through that - same problem.
So where does the answer lie? VPN issue? I've tried other VPN options - same problem. RDP problem? I've practically exhausted the list of suggested solutions that can be found by trawling the internet.
I even upgraded the broadband cable to replace the cheap old thing that has been working perfectly well in terms of broadband, again, to eliminate this as a possibility. Now I'm stumped.
To me, it looks like the problem lies between my router and the workplace network, i.e. a physical problem among the miles of lines connecting the two. Of course I don't want to shell out for a BT engineer to come out to investigate, so I thought that the combined wisdom of this community may have been able to help.
Sadly not.

Missing desktop connectivity service in my BB 8320

Similar Messages

Maybe you are looking for