Missing device data

Device data missed but device register data is still there, how can I recover the device? (re-install the same device)
Thank you.

I tried EG34 but it said device info record already exists for mat. no XXXXX and serial no.XXXXX.
'You have attempted to create a piece of equipment with material number XXXX and serial number XXXX. However, there is already a device info record in ISU for this combination of material and serial number.
The register data is there but device date is empty.(i used es32, enter installation#->click device)

Similar Messages

Missing export data in R/3

Hi,
I haven't setup customs management (i.e. not setup for proforma transfers from ECC) to GTS.
However, I get a message when creating billing document in ECC that missing export data even though billing doc is saved.
Do I need to do any config in ECC foreign trade
ANy idea?
Thanks,

As now you using GTS for Foreign Trade acitivity you need not to maintain any detail under Foreign Trade Configuration in Feeder system.
You will be getting this message because of the incompletion log schema activated under "Incompleteness Schemas for Foreign Trade Data" (Control Foreign Trade Data in MM and SD Documents). Deactivate those schema .
Kind Regards,
Sameer

Why do i keep getting "image is missing preview data" when trying to move files from bridge to PS ??

I am not able to move multiple files to PS...regardless whether I am doing HDR or panorama.....get this "image is missing preview data" with the first file number of the series of files.
#missingpreviewdata

You don't "move" anything from Bridge "into" Photoshop. You use Bridge to call on Photoshop to come and open the file(s), and Bridge simply hands the files over to Photoshop.
The problem lies in how the files are being processed and saved.
No one can help you until you provide complete and sensible details.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Somebody knows how to change the Iphone 3gs to 4s without missing my data?

I need to change my Iphone 3gs to 4s without missing my data,....Please I need help!!!

Just follow the directions here:
http://support.apple.com/kb/ht2109

(R11) HOW TO FIX MISSING CM DATA IN AR_PAYMENT_SCHEDULES_ALL TABLE

제품 : FIN_AR
작성날짜 : 2004-11-09
(R11) HOW TO FIX MISSING CM DATA IN AR_PAYMENT_SCHEDULES_ALL TABLE
==================================================================
PURPOSE
Credit Memo data가
AR_PAYMENT_SCHEDULES_ALL TABLE과 AR_RECEIVABLE_APPLICATIONS_ALL 에 생성
이 되어 있지 않는 경우 datafix script 으로 해결할 수 있도록 한다.
Problem Description
주로 타 시스템에서 autoinvoice 를 통해 넘어온 cm data에서 자주 발생하는 문제로 credit transaction 화면을 통해 보았을때 100% 로 applied 된 credit memo 임에도 applied 된 transaction의 balance에 전혀 영향을 주지 않는다.
cm_info_11.sql 을 수행해 보면 ar_payment_schedules_all table과 ar_receivable_applications_all table에 해당 데이타가 존재하지 않음을 알수 있다.
Workaround
Solution Description
1. AR Support Script Page (http://eastapps.us.oracle.com/appsar/SQL/SQL.htm) 에서 trx.sql과 pay.sql을 download 받는다. 이때 홈페이지 상의 90 Days, 150 Days 등은 transaction date scope을 의미한다. 즉 현재일로 부터 90일전까지의 transaction인 경우는 trx.sql을 150 일전까지의 transaction인 경우는 trx150.sql 을 download 받아야 한다.
2. trx.sql 을 수행한다.
3. trx.sql 수행시 생성되는 trx_<trx_id>.log 를 trx.sql 로 rename하여 다시 수행한다.
4. 정상적으로 수행되었는지 확인 후 pay.sql을 수행한다.
5. pay_<ps_id>.log 를 pay.sql로 rename한 후 수행한다.
Reference Documents
BUG 1401610

'ORA-29278: SMTP transient error: 421 Service not available' --> "Oracle had a problem communicating with the SMTP server"
Did you check:
How I can resolve the error " 421 Service not available"
Also look at document id 604763.1
Edited by: MccM on Feb 23, 2010 11:38 AM

Missing/wrong data in XI from RFC in ECC 6

I'm having the following issue where I send data from an RFC in ECC6 to an imported RFC in XI. Below is my structure in SAP ECC 6 and I see this in my testing of the RFC in SE37:
ORG_ID       US12345
LOG_ID       OR123
PASS_WD   ABC123
TAXONOMY ELECTRONIC.ORDER
Below is a snapshot of the XML of the Inbound Message in XI:
- <rfc:_-EFI_TI076_SEND_PCARD_PAYM xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <S_AUTH>
<ORG_ID>US12345</ORG_ID> (Correct)
<LOG_ID>ABC123</LOG_ID>     (Incorrect)
<PASS_WD>mc.Application.PaymentN</PASS_WD> (Incorrect)
<TAXONOMY /> (Incorrect)
</S_AUTH>
Keep in mind the following:
1) I've imported the RFC from the sender system into XI multiple times
2) I've executed both ABAP and Full Cache refreshes
Thanks so much in advance for your help on this.
Regards,
John

Carlos,
Thank you again for the follow up. I have again checked the data in the RFC, and my problem remains that the data shows up in the wrong field. Also - I'm missing some data that should be in certain fields.
Thanks as well for the information on the Queues. The Queues look ok, and nothing is being held up there. The "green" messages are those that are sent into the XI system from ECC. There are subsequent messages after the initial inbound message, which indicate an additional web service error, of which we can resolve quite easily.
Thanks so much!
John

If the connecting fields are missing the data from knvh should be u00BBnullu00AB

Could you help me I would like to have all fields from kna1 (if the connecting fields are missing the data from knvh should be »null«)in following code
select * from kna1 .
select * from knvh where kunnr = kna1-kunnr and vkorg = '0200'.
itab-mandt = kna1-mandt.
itab-stceg = kna1-stceg.
      itab-hkunnr = knvh-hkunnr.
      itab-datab = knvh-datab.
      itab-datbi = knvh-datbi.
    append itab. clear itab.
endselect.
endselect.

HI,
use the following code
select * from kna1 into table it_kna1.
if sy-subrc = 0.
select * from knvh into table it_knvh
for all entries in IT_kna1
where kunnr = it_kna1-kunnr
   and vkorg = '0200'.
if sy-subrc = 0.
loop at it_kna1 into wa_kna1.
itab-mandt = wa_kna1-mandt.
itab-stceg = wa_kna1-stceg.
loop at it_knvh into wa_knvh where kunnr = wa_kna1-kunnr.
itab-hkunnr = wa_knvh-hkunnr.
itab-datab = wa_knvh-datab.
itab-datbi = wa_knvh-datbi.
append itab.
clear itab.
endloop.
endloop.endif.
endif.
I hope this solves your problem
Regards,
Vara

How to deal with FLV with missing meta data?

I have and will get flvs in the future with missing meta
data.
I think for the most part the meta data that is missig is the
file length.
The exact files that are not working on our server are
working on some other companies FMS.
They must have some workaround actionscript on the server or
configuration that is making it work.
I'd like to know that workaround or that configuration
change. That would be the ideal fix.
I already know how to fix the FLV after I download it but I
wanted to know if there is another way to deal with this problem.
One were I can leave the FLVs alone.
Is there some serverside actionscript that would tell FMS the
length of the movie or change the configuration of fms to deal with
this somehow.
Any ideas?

If you are using the same database and referencing two tables then you dont need special configuration for it. You use single jdbc adapter. In ESR you create two statment structure one for each table. This is one option. The second option is use join statment and write query and in this case one statment data structure.
Please go through the help sap link for the jdbc document structure.
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/2e/96fd3f2d14e869e10000000a155106/content.htm
The second option can be done using the below structure.
<StatementName>
<anyName action=u201D SQL_QUERYu201D >
<access>SQL-String with optional placeholder(s)</access>
<key>
<placeholder1>value1</placeholder1>
<placeholder2>value2<placeholder2>
</key>
</anyName >
</StatementName>

WARNING -"You have entered an incorrect password 5 times. After 10 unsuccessful attempts your device data will be erased."

Dear All, Good day!I just I really need your help badly with regard to my phone. I used to charge the battery of my phone using USB cable on my laptop and today morning my phone is working just fine, but I was running out of battery so I tried to charge it. After few minutes, when I am about to use it, the lock code is not working anymore. I didn’t changed my password or done anything new and I am 101% sure that I have entered my password correctly. However, there’s a message showing : WARNING -"You have entered an incorrect password 5 times. After 10 unsuccessful attempts your device data will be erased." The screen shows Incorrect Password (6/10), but I am entering my correct code again and again and still not working. I restarted it many times and still showing the same thing. Now, I can’t get in and use my phone. I tried to call my number and it still reachable. Thank you so much in advance

To: JSanders, Hi there! thanks for spending time reading my queries and replying on it.YES! I am 101% positive with my security code. Thank God I was able to recover it and use my phone again. Just an input for those who might experience the same thing. Using Black Berry Z30, once you have the dialog box saying:WARNING -"You have entered an incorrect password 5 times. After 10 unsuccessful attempts your device data will be erased." and shows that you still have atleast 3-4 available chances to enter the code, just type "blackberry" thereafter another screen will pop-up and will ask to enter again your password. As long as you are 100% sure about your password, you'll be able to enter and get it back. Now, I am enjoying again my Z30.

Date type-specific Customizing missing for date type ACTActPln

Hi all.
I'm using a Web Service obtained by copying the CRM 7.0 built-in WS APPTACTCRTRC.
I'm using it to create Appointments using an Adobe Interactive Form.
It goes everything fine (a Date is created in the system, with all the input data properly set) excepted the dates...
The WS uses two TIMESTAMPS, TIMESTAMP_FROM for StartDateTime and TIMESTAMP_TO for EndDateTime, whereas the GUI transaction to create Dates accepts dates and times in separated fields.
Going in Debug I can see that the execution ends with the following error, referred to the involved entity (CRM_APPOINTMENT):
Date type-specific Customizing missing for date type ACTActPln
CRM_APPOINTMENT uses date profile 0000000001 with three possible date types: ORDERACTUAL, ORDERPLANNED and ORDERPROPOSED and I cannot find anywhere date type ACTActPln (just to add it in customizing).
Is anyone able to enlight me?
Thank you in advance!
Alessandro
PS I've years of experience in Java programming but I'm quite new to the SAP world. Maybe the problem is not a problem at all, but it seems to me as such. Even if it has a trivial solution, please let me know. Thx!

Hi,
Well I was about to write that you should enter date in decimal format. but you already did that as mentioned in How to set a date in a Form where the bound date format is a decimal?
In response to following from above thread (copied for others to understand my response)
Hi all.
I'm successfully using the LiveCycle Designer and I've managed to remotely create Appointments using a CRM Web Service (a mere copy of APPTACTCRTRC).
The only problem I'm encountering is that I'm not able to set the dates/times (start and end of the appointment).
Dragging each of the two fields from the WSDL based Data Connection I obtain a Decimal Field limited to 15 digits.
How can I write a date and time in such a field?
I've tried with a retroverse date as YYYYMMDDHHmmss (for example, 20100301124500) but it does not work
(the appointment is indeed created, but with the start date and time fields filled with
the current date/time and the end date and time fields filled with the current date and time plus 10 minutes).
The retroverse date above is only 14 digit long, so, maybe, this is the problem.
But, given the field definition, I'm not able to fill a blank space between the date and the time.
I'm not able to put a dot either.
What should I do?
Any suggestions?
Thank you in advance.
Alessandro
15 digit in UTC time format here is fraction of second so you should enter 201003011245000 (add one more zero).
14th Oct 2010 16:00 should be written as 201010141600000, so just try it and and see if it works, I guess if you do not supply end time then by default it will be starttime + 10 min but this is just guess.
Regards,
Gourav

[JPA] Exception Description: Missing meta data

I'm getting the following error message trying to compile a simple EE App that
contains a single Entity Class.
Exception Description: Missing meta data for class [java.lang.Integer].
Ensure the class is not being excluded from your persistence unit by a
<exclude-unlisted-classes>true</exclude-unlisted-classes> setting.
If this is the case, you will need to include the class directly by adding a
<class>[java.lang.Integer]</class> entry for your persistence-unit.That class contains a private Map<Long, Integer> list and I'm using SJSAS 9 and NetBeans 5.5.
Thanks in advance,
Stefano

I'm also experiencing this problem.
I'm pretty sure the cause of this is your "Map<Long, Integer>" and my "List<Integer>".
Doesn't GlassFish implement this JPA specification?
I see the post is been unreplied for a month: Please, somebody help us!
Tks,
Raul Oliver

Missing exif data

I'm not really sure how this works but... I need an applescript that will
(1) search a directory structure,
(2) find the image files that are missing the exif date,
(3) write the date created to the missing exif date field
(4) rename the file using the created date
I have several thousands of images that are missing the exif information. Any assistance would be appreciated...
Thanks

How are you trying to install it? There are two methods the easiest is to download the DMG file. Assuming you are doing the DMG file install are you saying that the installer hangs?
I don''t install using the DMG file so I can't say if there are problems with it.
When you get it running I do have a question for you:
You state that you have image files missing the Exif date information and that you want to add it back
(3) write the date created to the missing exif date field
but where are you getting the date created from if it is not in the file? Are you saying you want to use the file creation date? You realize that is not always the same as the image creation date, right?
4) rename the file using the created date
So you want to rename the file using the file creation date (which is now also the exif date)?
regards

Missed Payment Date

I had a payment scheduled to be made on Jan 8th, but missed that date for a couple of reasons. I made a partial payment tonight, and tried calling to talk to someone, but that office is closed until Monday.
Is there someone I can talk to before then so that my lines are not shut off? Also, the charges for the data are wrong and need to talk with someone about that. Thank you.

Call customer service at 1-800-922-0204 from a landline or *611 from your phone.

Microsoft BI Semantic Model for Power View is missing in data source

Microsoft BI Semantic Model for Power View is missing in data source type drop down when cretaing a rsds data source for powerview in sharepoint 2013

Hi Sanjay,
I resolved the issue.Follow the steps
1)Go to Central Admin->System Settings->Manage Farm Solutions (Under Farm Management)
2)Check if "powerpivotwebapplicationsolution.wsp" is there and is deployed for the webapplication under which you are creating report by verifying
Deployed to:,if not then deploy that for your web application.
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

OTF end command// missing OTF data

Hi all,
I created one PO smartform and assigned it to a driver program its execting fine in one development client.
When I try to execute the same smartform in another development client its showing "OTF end command// missing OTF data".
In the driver program there's FM " CONVERT_OTF_2_PDF".But still its showing the error when I run the tcode me9f to send the form through mail and even when checking the print preview.
what could be the reason? Do I have to make any changes in the FM CONVERT_OTF_2_PDF in the another dev client?
Please answer
Thx

Every OTF data has "//" in begining and "EP //" in the end. Are you modifying the OTF internal table before passing it to the FM for PDF conversion? Check the content of OTF in debugging mode.

Missing device data

Similar Messages

Maybe you are looking for