Missing device link /dev/eth0

I just recently did an FTP install of base Archlinux. I smoothly transfered to udev with not problems.etc.etc. When I finally installed Xorg and the Xfce4 WM and some plugins. IE netload. I found that my /dev/eth0 device link was missing or uncreated. Now my problem is I don't know how the hell to make the link to the device, I researched it and found that /dev/eth0 is virtually linked to the kernel modules somehow. Yet I didn't find a way to create it. So can anyone help?

Other distro's dont have /dev/eth0.
It doesnt exist and never will.
What plugin is this you speak about? what are you trying to do?

Similar Messages

HT204074 Manage devices link missing

I'm in iTunes, I've signed in, I've gone to manage my account but there is no device management link. Anywhere. Does this article need updating?

iPhone was, of course, connected before I tried. It shouldn't need to be connected to manage the list of devices associated with one's Apple ID in my opinion, but still, there is currently no manage devices link within the iTunes account information page.

How do I get the Device link back into the left column so I can update to iOS 5. Don't know what I did with it.

The Device link on my iTunes is missing. How do I get it back into the left column?

Top Sites, you mean? You can instruct Safari to open these in the General section of the preferences.

Nvidia Input/Output error. Could not open the device file /dev/nvidia0

Hello, I finally have Arch running on my MacBook pro 3,1 (mid 2007) but when I startx after installing Nvidia drivers it gives the Input/Output error and states "could not open device file /dev/nvidia0." I tried everything from the Nvidia wiki, and nothing seems to work. Does anyone please have any other ideas or things to try? My Nvidia card is 8600M GT and I have installed xorg-server, xorg-apps and Nvidia-utils already. Also is it possible my graphics card is not compatiable with this new kernel? Thank you for your time.

You know that this posts a huge list - and I couldnt remember how to trim for certain keywords (which one would you be interested in?).
So here the last few things regarding Video: from dmesg:
[..] nvidia: module license "NVIDIA" taints kernel.
[..] Disabling lock debugging due to kernel taint.
[..] nvidia 0000:01:00.0: enabling device (0002 -> 0003)
[..] vgaarb device changed decodes: PCI:0000:01:00.0,oldcodes=io+mem,decodes=none:owns=none
[..] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.37 Wed Aug 8 19:52:48 PDT 2012
then comes Swap, wlan, eth0 etc..

After partition using fdisk, i can not see the new device file (/dev/sdd1)

I used fdisk -l to partition /dev/sdd, use the entire disk as partition 1. it looks successful:
# fdisk -l /dev/sdd
Disk /dev/sdd: 10.7 GB, 10737418240 bytes
64 heads, 32 sectors/track, 10240 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x35e3e2c4
Device Boot Start End Blocks Id System
/dev/sdd1 1 10240 10485744 83 Linux
the problem: i don't see the device file /dev/sdd1. tried to delete it and partition again, the same.
also tried
- mknod b 8 70 /dev/sdd1, to manually create it, but when i use oracleasm createdisk DISK2 /dev/sdd1, the command won't recognize manually crated /dev/sdd1.
- reboot the server,
- "partprobe" command, no luck.
in addition, cat /proc/partitions seems including /dev/sdd1:
cat /proc/partitions
major minor #blocks name
8 16 292935982 sdb
8 0 143338560 sda
8 1 512000 sda1
8 2 142825472 sda2
252 0 25608192 dm-0
252 1 25608192 dm-1
252 2 62423040 dm-2
252 3 35012608 dm-3
252 4 20480000 dm-4
252 5 10240000 dm-5
252 6 4096000 dm-6
8 32 10485760 sdc
8 33 10484736 sdc1
8 48 20971520 sdd
8 49 20971504 sdd1
8 64 10485760 sde
8 65 10485744 sde1
any advice?
Thanks as alwasy!
Edited by: 943714 on Apr 25, 2013 10:55 AM

After you create a new partition, always verify it:
# fdisk -l /path/to/diskOnce that confirms the new partition, you must tell the kernel to re-read the partition table. Several ways to do this, depending on what your storage connection is. This often works:
# partprobe /path/to/mydiskThen check if the kernel sees the partition:
# grep /proc/partitions mydiskIf it does, you are done.

Is there a way I can view/manage devices linked to my iCloud account?

Is there a way I can view/manage devices linked to my iCloud account? I know how to view the devices linked to my iTunes account, but I am not sure if this is possible to see with an iCloud account.

You can't, except by seeing if they are using services associated with the account. You could, for example, launch Find My iPhone on iCloud.com to see what devices appear (which obviously wouldn't show devices not using Find My iPhone). Similarly, you could go to Settings>iCloud>Storage & Backup>Manage Storage to see what devices appear on the Backups list (which won't show devices not using iCloud backup).

HT204074 I do not see a "Manage Devices" link when I access my account information through iTunes. I want to know how many devices are linked to my account. Can anyone help?

I have accessed the Apple Support site http://support.apple.com/kb/ht4627 but I could not find the "Manage Devices" link on iTunes. The advice they give is as follows:
You can view which devices or computers are currently associated, remove unused devices or computers, and see how long before they can be associated with a different Apple ID from the Account Information page in iTunes on your computer:
Open iTunes.
Sign in to your Apple ID by choosing Store > Sign In from the iTunes menu.
Choose Store > View My Account from the iTunes menu.
From the Account Information screen, click Manage Devices.
Next to each device or computer name, you will be able to see when each was associated to your Apple ID. You will also be able to track how many days are remaining before your associated devices or computers can be associated to a different Apple ID.
Help would be greatly appreciated! Thank you!

Hello from Albania,
Please help me !! I'm desperate
I sold my iPhone 4s a few months ago.
Now i got my self a new iPad and created a new apple ID which i recently accociated with ITunes and ICloud.
However, i can't update anything on my Mac since it still requires the old apple id, even though i changed it anywhere i could.
I also don't get the manage devices when i tried to do this through the iTunes.
I have no idea what to do.
Waiting for your reply.
Regards

Having second hand iPhone 4 of family member now recognized as a device linked to my apple account and not theirs.

I'm sure this has been covered in another tread but I haven't been able to locate a solution to my query so here goes...
I have acquired an iphone 4 (and an iPad 2 but not too concerned with it in this discussion) from a deceased relative. Have unlocked the phone as my uncle's carrier was vodafone which differs from my carrier so no problems there...
The phone is working perfectly as a phone but in terms of transferring apps from my old phone which i have backed up to my macbook pro's itunes to my uncle's phone is proving an issue. In addition to this my old iphone without a sim card but with 3G or Wifi enabled will receive imessages rather than my uncles.
Essentially my uncle's iphone does not seem to respond as a piece of apple tech when synced with my itunes.
I am aware that there is issues with iphones and people having acquired them second hand have been told they have essentially bought a pricey paperweight.
Where my situation differs is I have the account details for my uncle's apple account.
Is there any way given that i have these details i can have my uncle's iphone recognized as a device linked to my apple account so that i can receive imessages and sync backed up apps from my old iphone 4 to this iphone.
Any instructions would be really appreciated and again if this has been covered before please bear with me
Eoghan

Contacted Apples ID support who addressed this issue for me. Many thanks

How can i get on my iMAC read access to BPF devices in /dev/bpf*

Ls.
How can i get/change on my iMAC read access to BPF devices in /dev/bpf*
I want to use Wireshark.
Thanks in advance.
Loekie.

...any app launched from /Applications holds only the permissions of the user launching the app, regardless of the owner (presumably because anyone, including "root" can install applications into /Applications).
It has nothing to do with where the application is installed. Any executable runs with the permissions of the user who runs it. The only exception is a binary executable with the SUID or SGID bit set, and then only if it's on the root device, and only if it's not an Aqua application. The SG/UID bits are ignored otherwise.
So, anyone who has installed Wireshark from the "native .dmg" by drag-and-dropping won't be able to use the suid trick because the OS will ignore the suid permissions.
Sorry, I don't understand this at all. Wireshark invokes dumpcap as a child process to capture packets. If dumpcap is installed anywhere on the root device as SUID root, then it will run as root regardless of who invokes it.
The suid method will only work for Macports and Fink installations...
That's not correct. There are many SUID or SGID executables in a default installation of the Mac OS, and none of them comes from MacPorts or Fink.

HT1420 I have a number of devices linked to a single iTunes account. Of these devices, two of the originals were computers whose hard drives failed and I was unable to die authorise them before the failure occurred. Is there a way of deauthorising them on

I have a number of devices linked to a single iTunes account. Of these devices, one was a laptop whose hard drive failed, and one was an iPad which died. My question is if it is possible to remotely deauthorise these devices or is it necessary to deauthorise all devices on the account and then reauthorise those devices which are still current.
Thanks
Tan Anu

iPads don't count in the number of authorisations, only computers count. Individual computers can only be deauthorised directly on them, but if you have 2 or more computers authorised then you can 'deauthorise all' (which you can only do once every 12 months) and you can then reauthorise the computers that you still have and need (deauthorising a computer doesn't remove any content from it).

Could not open the device file /dev/nvidia0

and yet:
[root@mythfe01 dev]# ls -alh nvid*
crw-rw-rw- 1 root root 195, 0 Mar 26 16:06 nvidia0
crw-rw-rw- 1 root root 195, 255 Mar 26 16:06 nvidiactl
and:
[root@mythfe01 dev]# lsmod | grep nv
nvidia 4083280 0
agpgart 28872 1 nvidia
but:
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
I am using a homemade kernel, but i can't think of a reason why that would prevent things from working properly considering the module loaded ok.
Any thoughts?

Moo-Crumpus wrote:Do you use udev? Have a look if there is a ruleset for nvidia, I remember there was one. Afaik, nvidia should be owned by the video group - well, once it was, I am not up to date and have no arch machine with nvidia right now.
Could anyone specify how to do that? I have the exact same problem, although I use the default kernel that came with Arch.
NVIDIA: could not open the device file /dev/nvidia0 (Permission denied).
NVIDIA: Direct rendering failed; attempting indirect rendering.
[kristjans@myhost ~]$ cat /proc/driver/nvidia/cards/0
Model: GeForce 6200 TurboCache(TM)
IRQ: 22
Video BIOS: 05.44.02.52.00
Card Type: PCI-E
DMA Size: 39 bits
DMA Mask: 0x7fffffffff
[kristjans@myhost dev]$ ls -alh nvid*
crw-rw---- 1 root 27 195, 0 2007-10-06 19:10 nvidia0
crw-rw-rw- 1 root 27 195, 255 2007-10-06 19:10 nvidiactl
[kristjans@myhost dev]$ lsmod | grep nv
nvidia 6829684 40
i2c_core 20352 2 nvidia,i2c_piix4
agpgart 27224 2 nvidia,ati_agp
Last edited by KSiimson (2007-10-11 04:23:18)

New device want to update device linked to blackberry ID

I got a new blackberry want to update device linked to blackberry ID
how do I go about this?

Thank you, that helps me sort through the thousands of possibilities and find things that may apply to your situation.
dboland99 wrote:
"Blackberry app world is having trouble connecting to the Blackberry app world server. verify your network connections and try again"
KB29490 The error message "BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again." occur when attempting to log into App World
KB20031"BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again" appears when BlackBerry App World is started
KB28188"BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again. (Error id: 40820) " error is displayed when opening App World on the BlackBerry smartphone
dboland99 wrote:
App world Online connecting bold through usb:
App World Web Plugin Error
An error has occurred communicating with the BlackBerry App World Web plugin. Please restart your device and try again. If you have content protection enabled on your device, please disable and try again."
And, what about the "Content Protection" instruction? Do you have that enabled, and if so have you disabled it?
Otherwise, I can't find any relevant KBs...you can try searching to see if you have better luck. I have seen the error before, though it's been a while. As I recall, I had to use IE over any other PC browser or this error would present.
dboland99 wrote:
extra info - my home wireless is on WAP2 security and has a 64-bit pass word (i.e too long to enter into blackberry)
So, your BB is not connected to your WiFi. That's fine, as long as it has a good data connection via your carrier data network (e.g., email is coming in, you can otherwise browse with the BB Browser, BBM work, etc.). Oh, and you of course do have a full BB-level data plan? If not, AW will never work...like everything else, it's a service, requiring the user to subscribe to an adequate data plan to gain access to the service.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TOBJ entries missing from upgrade dev and test systems

Hi,
We are in the process of ECC Upgrade from 4.7 to ECC 6.0 and upgraded our dev and test systems. We missing some SAP defined object entries in TOBJ table from dev and test. Because of this some of the roles getting transport errors if the roles contain those missing objects. We tried to transport the missing entries but we don't see any provision for that. Does any one through an idea to move those missing entries from dev to test. Not sure we will get same error in production. This table updates during upgrade and may be we missed some thing in test as though we followed the same upgrade process for both systems.
Thank you
Venkat

Possibly you are no longer licensed for components which these objects are called from in their concepts.
In that case the ability to start the component objects should be removed as well.
Of course if some Z-programs checked these objects or SAP's own "package concept" extended syntax checks did not respect them then you might have problems.
This should normally only apply to manual authorization instances, as if you had upgraded the roles and regenerated them, then you would not have this problem (in the roles).
It tells us something about how you or someone else without any training have built these roles (or subsequently mucked them up...)...
When reading stuff like this, I am always of two minds...
1) SAP should make the concepts simpler and more intuitive to use without "cowboy" activities allowed by users with SAP_ALL etc.
2) Customers should bleed for their own sins for not training people appropriatly (here, faking CV's is also ma major pest!).
It is always a bit of a cat & mouse game and ends up in forums such as SDN in the long run.
Some of it might also have become "available" to be used by SAP (I believe it was the 6.20 upgrade which installed everything...).
Real bugger. I would accept it and test as best you can. You can also compare "where.used-lists" and "code scans" before and after the upgrade to see whether it is used by foreign repository objects.
The scan is more reliable here, as sometimes the object name itself is a variable from a data declaration or condition which you cannot see in the "procedural" code.
Cheers,
Julius

Java.util.MissingResourceException: Missing device property

Hi all.
I've installed:
Sun Java Wireless Toolkit 2.5.2 for CLDC
Java Platform Micro Edition Software Development Kit 3.0 Early Access ( i suposed that it isn't necessarly)
JDK 6 Update 13
NetBeans IDE 6.5.1 (All)
After instalation i run WTK - > open sample project -> run and get this:
Warning: Could not start new emulator process:
java.util.MissingResourceException: Missing device property
Project is building without problems but i can't run it ;/ In NetBeans i have similiar problem i can't run sample projects because i have this:
Starting emulator in execution mode
com.sun.kvem.midletsuite.InvalidJadException: Reason = 22
The manifest or the application descriptor MUST contain the attribute: MIDlet-1
I've re-installed everything many times without windows :) I tried to search solutions for that but i couldn't find anything usefull.
I will be very apreciate for helping me.
Edited by: grubasek on Apr 1, 2009 3:29 AM
i have of course more partitions and WTK, NetBeans, ME SDK 3.0 are installed on other than C: but JDK is installed on C: in program files where in path is space. It has any meaning?

Did you figure this out? I've got exactly the same problem. Same error that is getting reported. The resource missing is the AMConfig.properties file which is required for the Access Manager Policy agent. Agent doesn't work until I get the WebSphere config correct.
Thanks in advance.

Udev doesn't create sd* devices in /dev

Today I updated udev package and after it I can't start my system. The booting stops with the message about check filesystem manually. When I tried to do this I couldn't find any sd* devices in /dev. Kernel detects all drives and correspond files presents in /sys/block directory. I can make device files with mknod command using information from /sys.
How do I make udev to create device files in /dev?
Sorry for bad English.

I just found one more interesting thing. When I test udev rules by "udevadm test /block/sdb/sdb2" udev creates correct device files - /dev/disk/ dev/block and /dev/sd*. But at daemon mode - udevd --daemon it doesn't do anything!
Does anybody know how to fix this?

Missing device link /dev/eth0

Similar Messages

Maybe you are looking for