Missing device name when scheduling recording on remote DVR

Just an observation:
Prior to the new release, when on my 2500, I schedule a recording on the [remote] DVR, it used to say "DVR Alert" And then show the name of the DVR device. Now it no longer displays the name of the DVR. It just says "Recond on" (no name).
Come to think of it, the name is also missing (chedule on") when I schedule the recording too.
It's not a big deal, since I only have on DVR, but it is annoying.
Also, when you stop a recording (on a remote DVR), wan't an option to delete it presented (at the time)? I thought this was the way it worked, now it's a two step process (have to go back to DVR menu). Maybe it's only when on the DVR?
Eric

Hello Eric,
You are correct. With the new update, stopping a recording in progress no longer brings up the "Delete Recording?" option. This goes for the remote boxes and main DVR.
FCN

Similar Messages

Setting the "Device Name" when activating device licenses

What determines the “Device Name” in the list of activated devices in the Development Pool on the Adobe license site for device licenses? Specifically for Macs... It doesn't seem to be the "Sharing Preferences" pane...

So, figured it out by myself. It appears that the Adobe serializer uses the local Mac's hostname. You can find that out by going to the terminal and typing 'hostname'. The host name gets set initially by any domain name that is assigned to the IP. If none is, it uses the Sharing Name in the Sharing preferences pane. Regardless, you can override and change the hostname using the terminal (sudo scutil --set HostName mynewhostname.local). Deauthorize the device on the Adobe site and reauthorize and it will appear as desired. This way, you can have the machine listed on the Adobe site however you wish rather than by domain name. This is helpful if you have a long list of machines and wish to set their hostnames to their room number or location, etc.

Missing artist name in album view using remote app

since updating to itunes 12 and latest remote app artist name is missing in album view

Same problem here. I think it happened when my computers updated my windows itunes to v12 without asking me.

Missing contact names when someone rings me

Hi
When any of my contacts ring me only their numbers are displayed with no name.
How do I fix this please
Terri

Go to App World and down load Backup Pro (paid) or InTouch Contacts (free). I prefer the paid version.
Backup ONLY your contacts to media card or the cloud like Box.com or dropbox.
Then, you will wipe and remove all your contacts off this device by opening your main Settings (swipe down on the homescreen from the top black bexel to Settings.
Tap Accounts.
Lower right tap the three dots overflow menu icon.
Tap Clear Local Contacts.
After that is completed, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
Now, restore your contacts from your previous backup as instructed above.
Once the contacts have been restored, do yet another reboot as above.
Give it 10-15 minutes after reboot to allow data to sync, etc., and test your contacts again when someone calls you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Device "name" in reports

Is there any way to show the device name when I run a report? When Zenworks auto registers devices it uses the computer name. I then rename that to the users first and last name to be more easily identifiable in my workstation folders. I did a custom report with every field and still this name does not show up as a column in my reports. Is there a way to get it in my reports? Thanks
Edit: we are on 11.2.3a

akwyjibo,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Remote DVR not working

I have the multi-room DVR. When I go to Remote DVR on the site and choose Scheduled Programs, it says "Bad Gateway". Going to Recorded Show just says the set top box is not responding. I confirmed the box is powered on and working normally. Can anyone assist?

I had the same issue. And I'm experiencing frequent picture blackouts. I can hear the TV, just no picture. So far, I've been able to shut everything down and restart FIOs TV to get the picture back. But this is starting to get very annoying.

Help. I accidentally formatted by the device name not the volume name when trying fresh install osx Mountain lion.

I was trying to do a fresh instal of Mountain Lion. By fresh I mean clean.
Firstly, my iMac disc drive isn't really working to well, so I have Mountain Lion on a usb.
I started up and held the option key.
Entered into disc utility mode, and started doing everything correct.
Then near at the end I when i'm required to select a start up disc it doesnt show anything... Help?
I checked around online and saw this tutorially and notice I had done something different.
http://macs.about.com/od/MountainLion/ss/How-To-Perform-A-Clean-Install-Of-Os-X- Mountain-Lion-On-A-Startup-Drive.htm
on page 2. where it says
When Disk Utility opens, select your Mac's startup volume from the list of devices. If you never changed its name, the startup volume will be listed as Macintosh HD. Be sure to select the volume name and not the device name, which will usually be the name of the physical drive, for instance, "500 GB WDC WD5."
I think I may have selected the device name. Is this the cause of my problem?
Can I fix this ? Please help?
I live in Auckland in New Zealand, I don't have any apple stores here

Ok, I realized that won't work, I don't think, because you can't enable it on your Mac.
However, if you have another Mac, you can use Firewire Target Disk Mode to install. Boot your Mac while holding down the T key. You will see a FireWire symbol on the screen. Then, connect the two with a Firewire cable. Your Mac hard drive will show up on the other. Try to install onto that.
This may not work, depending on the other Mac. If it is similar to yours, it should.
I'm not sure if you can do it the other way. If you put the DVD into the other Mac and boot it into Target Disk Mode, then boot yours holding down the option key, you may be able to select the DVD on the other Mac as the startup.
This very old article seems to indicate it will work: http://lowendmac.com/misc/06/0914.html
Remote Disc Instructions:
Here is Apple's info: http://support.apple.com/kb/HT5287
Here is now to enable seeing the Remote Disc on your Mac: http://hints.macworld.com/article.php?story=2009012605560521

Windows 2012 adds an incorrect name when creating a PTR Record in a /56 reverse zone using MMC

Hello,
I have created a reverse lookup zone for 2001:bc8:3f83:0200::/56, when I add a PTR record for 2001:bc8:3f83:0200::200:99, the MMC snap-in adds a zero group in my address and adds a record for 2001:bc8:3f83:0200:0000:0000:0000:200:99.
Zone creation :
http://imageshack.com/a/img673/4018/JFf7BX.jpg
PTR creation :
http://imageshack.com/a/img538/9239/bZqaQl.jpg
Result :
a PTR with address 2001:bc8:3f83:0200:0000:0000:0000:200:99 :
http://imageshack.com/a/img673/8793/3EcxOW.jpg
(Sorry for the image links, the forum would not allow me to post images...)

Hi,
According to your description, my understanding is that the name of PTR record(IPv6) displayed as 2001:bc8:3f83:0200:0000:0000:0000:200:99, but when open its Properties, the Host IP address option displayed as 2001:bc8:3f83:0200:0000:0000:200:99.
I have the similar problem on my test device Windows Server 2012, but this problem do not occurred on Windows Server 2012 R2. They have different ways to type the Host IP address. And it is may be related to the prefix digit number – not the integer multiple
of 16.
You may try to update your server to the latest version. Or a work around way to manually add the PTR record of IPv6 by command line:
dnscmd <ServerName> /RecordAdd <ZoneName> <NodeName> [/Aging] [/OpenAcl] [<Ttl>] PTR <HostName>|<DomainName>
Detailed information reference link:
https://technet.microsoft.com/en-us/library/cc844045(v=ws.10).aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts

I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts. All the instructions on synching start with "find your device in the device window". But what if you have no device window?

Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
I thought the libraries were the same.

How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

Hi littlemansa,
If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
http://support.apple.com/en-us/HT4137
Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Hi I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

I shoot on a canon 5d mk11 and I record my audio on an external device yet when I open up my footage in final cut pro x I can't find my external audio files only the ones attached to the clip which are off the camera mic

What device?
What format?
How are you importing it?
Can you find the external audio with Finder?
Where is your destination file when you import it?
Andy

TS1702 My IPod Nano is synched to my ITunes library, but when I click on the Device name, all of the music is "grayed out" and I can't click on anything.

My IPod Nano is synched to my ITunes library and shows up under Devices, but when I click on the Device name, all of the music is "grayed out" and I can't click on anything.

In order for this content to not appear grayed out, you need to enable the Manually manage music option from under the iPod's Summary tab in iTunes. Keep in minding that manually managing your iPod's contents is different from having content automatically sync to your device from iTunes. See here for more information.
Managing content manually on iPhone, iPad, and iPod
B-rock

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback.

I connect my mic with an M-audio mobile pre usb device. When I try to record, I can see that my voice is recording but can't hear it during playback. I tried different input and output settings but it didn't help. Any help will be appreciated.

Hear your microphone or instrument as you play and record (monitoring)
You can hear, or monitor, input from an instrument or microphone in GarageBand while you play and record. When you turn on monitoring for a track, you hear the musical instrument or microphone connected to the track’s input. Monitoring lets you hear yourself play so that you can hear the part you want to record as well as the rest of the project.
You can turn on monitoring for a Real Instrument track or Electric Guitartrack from the track’s header, or in the Track Info pane. Electric Guitar tracks always show their monitoring buttons, and you can show monitoring buttons for Real Instrument tracks using a menu command. You can use monitoring with feedback protection to avoid feedback while you play.
Hide
To turn on monitoring in the track header:
Choose Track > “Show Monitoring for Real Instrument Tracks.”Monitor buttons appear in the headers of Real Instrument tracks. On tracks with monitoring turned on, the button lights yellow.
Click the Monitor button in the header of the track you want to use.
HideTo turn on monitoring in the Track Info pane:
Double-click the header of the Real Instrument or Electric Guitar track you want to turn on monitoring for.The Track Info pane opens.
From the Monitor pop-up menu, choose one of the following:
Choose Off to turn off monitoring. You can hear your instrument only while you record.
Choose On to turn on monitoring and protect against feedback.
Choose On (no feedback protection) to turn on monitoring without feedback protection. If the input level is too high, it may cause feedback (especially if you are using a microphone and listening to your project through your computer speakers).
For an Electric Guitar track, you can view the Monitor pop-up menu by clicking Edit, and then clicking the back side of the amp. The Monitor pop-up menu appears with the input controls below the stage.
You should usually turn off monitoring when you are not playing or singing. When monitoring is turned on, your computer can pick up output from your speakers or monitors, causing unwanted feedback. Using headphones rather than speakers to listen to your projects can help eliminate feedback.
If you select your computer’s built-in microphone as the audio input, in the Audio/MIDI pane of GarageBand preferences, monitoring is turned off for all Electric Guitar tracks to avoid unwanted noise.
SEE ALSO
If you don’t hear sound from a Real Instrument
Was this page helpful?Send feedback.
© 2010 Apple Inc. All rights reserved.

Set several printers as output devices when scheduling a job

Hi experts,
I am working on ECC 6.0. I am scheduling background jobs through sm36 and I must configure 3 different printers as output devices, that is to say the output must go to 3 printers at the same time. I can not find how to do it. Could you please help me ?
many thanks,
Best regards,
Guislain Libessart

Hi,
I am really sorry, about those responses but it is possible. You will have to create a POOL printer for the same.
Goto SPAD
Create a New Printer with
Device type : It should be common for all those actual printer where the printing will happen.
Device Class : Device Pool
(When you set this Device Class It will open one more tab "Device Pool" and the tab "Acces Method" will no more be there)
Goto the "Device Pool" Tab Add the printers to which the print will redirected to. And choose the option "Send to All Devices in Pool".
Now assign this POOL printer to the background job from which you want to print the outout to all those printers.
Regards,
Sanujit

I lost my phone 6 weeks ago, today I got an email saying "iPhone has been locked." does this mean someone has tried to power up my device. I had put the remote lock on the phone when I lost it. Today I sent 2 messages to the phone asking to call my phone

I lost my phone 6 weeks ago, today I got an email saying "iPhone has been locked." does this mean someone has tried to power up my device. I had put the remote lock on the phone when I lost it. Today I sent 2 messages to the phone asking to call my phone

Welcome to the Apple community.
dlondon629 wrote:
I lost my phone 6 weeks ago, today I got an email saying "iPhone has been locked." does this mean someone has tried to power up my device......
Yes, this would seem the most likely reason to me.

Missing device name when scheduling recording on remote DVR

Similar Messages

Maybe you are looking for