Missing device registration info

After the infamous security breach of Sony's "secure" network, my device info I had registered last January is now missing. Looks like a reset of information. Also, I wasn't prompted to change my password when I logged into the Sony site as mentioned in the updated press release on Sony's site. I had to manually change my password; The issue I also have with the their passwords is I can't use special characters! Less secure in my book.

Thank you for your post.
There is further detail regarding this issue in a statement released on the PSN Blogs yesterday (5/4):
http://blog.us.playstation.com/2011/05/ ... entatives/
Keep your eye on the PSN blog for the latest up to date info on the status of the network:
http://blog.us.playstation.com
To keep current on the latest news and further updates with the Sony Online Entertainment network please visit here :
http://www.soe.com/securityupdate

Similar Messages

Registration Info

Guys,
I found the FL2.1 registration is a bit troublesome and every
time I hard reset my device, after I reinstall the FL2.1, I need to
do the whole process of registration (open license.txt, copy and
paste the URL, copy and paste the key to Adobe website and fill up
the email and device info). Couldn't imagine I need to do this
thing again and again.
Is there a way to keep the registration info, eg. registry,
file, etc so I can simplify the whole thing.
Any idea where does FL2.1 store the registration info?
Thanks.
Cheers,
Vibranze

> I found the FL2.1 registration is a bit troublesome and
every time I hard
> reset my device, after I reinstall the FL2.1, I need to
do the whole
> process of
> registration (open license.txt, copy and paste the URL,
copy and paste the
> key
> to Adobe website and fill up the email and device info).
Couldn't imagine
> I
> need to do this thing again and again.
>
> Is there a way to keep the registration info, eg.
registry, file, etc so I
> can
> simplify the whole thing.
Try doing what I do...
After a hard reset, I install the stuff I need, get the
device just exactly
how I like it. That includes completing all the registration
stuff.
Then I do a full backup.
Then if I have to do a hard reset (very rare these days) I
can restore from
the backup. Takes about 5 minutes.
There's always one or two new things I need to install after
a hard reset.
Once my current setup gets so far away from my original
backup, I'll create
a whole new backup and use that instead.
Steve

ADFS Device Registration

I have one application proxy and one adfs server. Right now normal sso works (utilizing Office 365 services). I am trying to configure two-factor using device registration. I was able to join an internal computer using Workplace join.
I am trying to install an iPhone that's connected to the public internet. I can get to the otaprofile fine, but when I click install I get an error saying "A connection to the server could not be established." I ran the update command on my proxy
server. Backend servers are enabled and initialized.
In my certificate, I added enterpriseregistration as a SAN. My common name is sts.companyname.com. Public dns is CName from enterpriseregistration to sts. STS is A-record points to proxy server. Proxy server is using hosts file to get internal servers.
Any thoughts? Am I missing something?
-- Michael

Hello,
please see
http://social.technet.microsoft.com/Forums/windowsserver/en-US/195399e6-b5dd-46cf-a351-228bd62b24d8/adfs-specific-question-post-on-the-adfs-forum?forum=winserverDS
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

IBank does not show registration info paid version

I have a trial version downloaded from The App Store, and paid later at IGG's website.I got all the proper info Invoices and registration info thru e-mail.
When I click on Registration Info,there is nothing other the Icon.
I have the register # but there is no place to type it in.
The instructions tell to enter it in the file menu,but it's not there to enter.Just this icon that should show my name,date and reg.#

Doublechecking, KAT ... is the Device Screen looking a bit like the following screenshot?
Which particular Windows OS are you using? (XP, Vista or 7?)

Getting error like "Error in portal_sso_redirect: missing application registration information" while trying to run application using Oracle SSO

Hi All,
I am trying to implement SSO authentication for my APEX application. I have registered the application as a SSO partner application.
I have set the authentication scheme to Oracle Application server Single Sign On.
When i run the application i am getting the below error.
Error in portal_sso_redirect: missing application registration information: p_partner_app_name:g_listener_token:HTML_DB:ofss220104.in.oracle.com:5050Please register this application as described in the installation guide.
Please help me to resolve this.
Thanks and Regards,
Suhas

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

Error in portal_sso_redirect missing application registration information:

Hi,
I am getting the following error message, when i run any of my APEX Page. Please help me to resolve this issue.
Error in portal_sso_redirect missing application registration information:
p_partner_app_name:g_listerner_token:HTML_DB:stbp5.oracle.com:80
please register this application as described in the installation guide.
What is the issue? What is the fix for that?
Regards
Balaji S

Suhas,
After you registered your application as a SSO partner application did you use the information from Oracle SSO (home URL, success URL, Logout URL, app_name etc) and loaded it into the APEX_SSO schema using the regapp.sql script from the ssosdk?
Step 4 of http://www.oracle.com/technetwork/testcontent/sso-partner-app-100552.html#INSTALL
Ricker

How do I skip the Device Registration Portal for Cisco ISE web portal

I have set up a sponsor and guest portal system for wireless guest access to the internet using ISE v1.2.0.899 virtual and WLC 5500 runninng 7.4. After logging into the intial page, the guest user is directed to the Device Registration Portal. Entering a MAC address value puts the user in a continuous failing loop. But, if they just hit the "continue" button at the bottom of the page, they will be directed onward and have internet access as was intended. I have no requirement for guest users to register their devices. What do I need to do to remove the device registration portal from the log on sequence for guest user access? Thanks!

Hello Scoot,
you make a list of the MAC add of coperate devices. and set a rule if authentication doesn't happen only these devices can do the self registration.
I hope this works for you

I have an old version Adobe Creative Suite 3 Design Premium. I uninstalled it from my old computer and was trying to install it on my new computer. It copied all the files but I cant open them and it doesn't ask me for my registration info, which I have.

I have an old version Adobe Creative Suite 3 Design Premium. I uninstalled it from my old computer and was trying to install it on my new computer. It copied all the files but I cant open them and it doesn't ask me for my registration info, which I have. What shall I do to get Adobe up and running?

when you were install your cs3 you should have been prompted for you serial number. were you?
if not, you probably didn't properly install cs3. copying/migrating/moving etc is problematic.
if yes, did you see any error messages during installation?
if yes, attach a screenshot of the error message.
if not, check you install logs, Troubleshoot with install logs | CS5, CS5.5, CS6, CC

Sybase device registration

Hello,
we are at the beginning of evaluating the sybase unwired plattform and stuck in the following situation.
we created a MBO, deployed it to the supserver, generated the iOS code, included it in your app and now trying to connect to the server with the following settings:
DEVICE:
ServerName: myServer.local (the sup is running in a VM)
ServerPortSetting: 5001
CompanyIDSetting: 0
UserNameSetting: supAdmin
ActivationCodeSettings: 123
URL Prefix: /tm?cid=%cid%
SCC- Device Registration:
Activation user name: supAdmin
Server name: myServer
Port: 5001
FarmID: 0
Activation Code: 123
For the connect we use the following code:
SUPConnectionProfile* cp = [iMAM_IMAMDB getSynchronizationProfile];
     [cp setDomainName:@"default"];
          // Set log level
     [MBOLogger setLogLevel:LOG_INFO];
     if (![iMAM_IMAMDB databaseExists]) {
          [iMAM_IMAMDB createDatabase];
     CallbackHandler* databaseCH = [CallbackHandler newInstance];
     [iMAM_IMAMDB registerCallbackHandler:databaseCH];
     [iMAM_IMAMDB startBackgroundSynchronization];
     NSInteger stat = [SUPMessageClient start];
     if (stat == kSUPMessageClientSuccess) {
          while([SUPMessageClient status] != STATUS_START_CONNECTED){
               [NSThread sleepForTimeInterval:0.2];
               NSLog(@"wait for connection to the sup server!");
          [iMAM_IMAMDB beginOnlineLogin:@"supAdmin" password:@"s3pAdmin"];
          while([iMAM_IMAMDB getOnlineLoginStatus].status == SUPLoginPending){
               [NSThread sleepForTimeInterval:0.2];
               NSLog(@"wait for connection to the sup server!");
the problem is, that we are currently not leaving the first while loop, means we do not get a connection to the supserver. In the scc i do not see any incoming requests of my device - "Activation still pending"
Any clue what causes this strange behaviour?
Are there any further sybase monitoring capabilities which helps me to get more information about this?
In general the sybase scc can be reached by the device, which means that that the tcp channel is open.
We are running on sybase 1.5.5 and iOS 4.2.
Looking forward to share my experiences with you here.
Jens

Hi, try to use same server name in scc (myServer.local).
The program run on the device or on the simulator? Try to telnet myServer.local on port 5001
If still not work try this:
if (result == kSUPMessageClientSuccess) {
          [iMAM_IMAMDB asyncOnlineLogin:@"supAdmin"
password:@"s3pAdmin"];
          while([databaseCH loginSuccessCount] < 1) {
[NSThread sleepForTimeInterval:1];
[window addSubview:navController.view];
[window makeKeyAndVisible];
} else
[self showNoTransportAlert:result];
Edited by: Alessandro Iannacci on Apr 6, 2011 10:43 AM

ISE 1.2 device registration with MAB only, no client provisioning

Hello,
Is it possible for AD users (no guest users) to walk through the Device Registration Self Registration without Client Provisioning ?
I do not want to push certificates or native supplicant profiles to client devices.
I would just want AD users to register their MAC address, if MAC is not known. Add the MAC to some sort of group.
Then if MAC is known (in this group), skip registration and allow full access to the VLAN.
Right now, i am stuck on the registration portal that says "The system adminstrator has either nog configured or enabled a policy for your device". ?? It is true that my Client Provisioning screen is empty.
Am i really obliged to use native supplicant provisioning to register my device ?
GN

Hi
Device Registration web auth is a process where you can configure user without client provisioning.
In this scenario, the guest user connects to the network with a wireless connection that sends an initial MAB request to the Cisco ISE node. If the user’s MAC address is not in the endpoint identity store or is not marked with an AUP accepted attribute set to true, ISE responds with a URL redirection authorization profile. The URL redirection presents the user with an AUP acceptance page when the user attempts to go to any URL.
1. A guest user connects to the network using a wireless connection and has a MAC address that is not in the endpoint identity store or is not marked with an AUP accepted attribute set to true, and receives a URL redirection authorization profile. The URL redirection presents the user with a AUP acceptance page when the guest user attempts to go to any URL.
2. If the guest user accepts the AUP, their MAC address is registered as a new endpoint in the endpoint identity store (assuming the endpoint does not already exist). The new endpoint is marked with an AUP accepted attribute set to true, to track the user’s acceptance of the AUP. An administrator can then assign an endpoint identity group to the endpoint, making a selection from the Guest Management Multi-Portal Configurations page.
3. If the guest’s endpoint already exists in the endpoint identity store, the AUP accepted attribute is set to true on the existing endpoint. The endpoint’s identity group is then automatically changed to the value selected in the Guest Management Multi-Portal Configurations page.
4. If the user does not accept the AUP or an error occurs in the creation of the endpoint, an error page appears.
5. After the endpoint is created or updated, a success page appears, followed by a CoA termination being sent to the NAD/WLC.
6. After the CoA, the NAD/WLC reauthenticates the user’s connection with a new MAB request. The new authentication finds the endpoint with its associated endpoint identity group, and returns the configured access to the NAD/WLC.

ISE 1.2 Guest Portal - Device registration portal

Hello,
I have a problem with the following setup:
- Cisco ISE 1.2 (latest patch)
- Cisco WiSM with 7.0.220.0 (first generation)
I have build Guest access via ISE. Because the WiSM's highest version is 7.0.X I used LWA with a redirect to the ISE guest portal. When using the Guest SSID with a iPad the client is redirected to the ISE guest portal and the user can enter his credentials (deliverd by the Sponsor). After clicking "Sign On" the client is forwarded to the "Device Registration Portal" of ISE and need to register his MAC address.
We have try a lot of differend settings but we cannot switch off the forward to the "Device Registration Portal". We only want to use the Guest User portal.
Please can someone help me to find a solution for this problem?
Thank you in advance.

I know this might be reaching, but have you turned off the My Devices portal?
If so, an idea of the different settings you have already tried might help.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

ISE 1.2 Device registration problem

I'm trying to get the device registration to work, but keep getting "Device not supported" or "Unable to obtain the user information".
I cannot seem to find any information on those errors from the manuals.
What are the possible solutions to get it working ? If the device is not supported, does it mean, that the profiling failed or something else ?
ISE 1.2

Hi Harri,
What kind of authentication are you doing for these users? MAB, Dot1x? Also is this issue seen with all devices, or just a few ( i.e. same type, same vendor...)?
If this is self-registration for guest users, there is a known issue with using Custom Guest Portal. The defect details are given below :
https://tools.cisco.com/bugsearch/bug/CSCui77336/?reffering_site=dumpcr
Therefore if you are using the custom portal, can you instead try with a default portal?
Thanks,
Aastha

Ise 1.2 Device Registration not auto filling the MAC field

Hello
I have installed 1.2 and when guests login, they get the new (not improved imo) device registration portal, but the field where they have to enter the MAC adress is empty, I can remember it was prefilled in previous ISE versions.
Is this normal beheavior on 1.2? I have configured calling station ID on MAC instead of IP, any other things that I need to configure to get this working?
90% of the users doesnt know what a MAC adress is, or where to find it.
Greetings
Steven

Peter, I am glad you like my slides (although not sure I ever published this version outside Cisco!).
Steven, It sounds like you have enabled the option in the Guest Portal to allows Device Registration. This option is intended to be used by Guest accounts only and does NOT support auto-populate of MAC address. This was a very limited feature introduced in 1.0.
This feature should not be confused with the DRW or NSP flows for device registration. For the purposes of device registration with web auth, both CWA+DRW and CWA+NSP flows are working in ISE 1.2 Patch 7. However, CWA+NSP flow will not work for guest user accounts if enable the Supplicant Provisioning option in the web portal. The intent of the NSP flow is for employee accounts doing BYOD, and not for guest users. That said, it will still work if redirect successfully authenticated guest users to NSP using the Network_Access:UseCase=Guest_Flow condition (and optional match on Guest role).
I would recommend CWA+DRW option for Guest users as it is simpler, more streamlined, and you can specify a unique Identity Group such as "GuestEndpoints" to these devices. This makes future cleanup easier and maintains them separately from employee RegisteredDevices. ISE 1.2 ERS API can be used to programmatically to delete these endpoints periodically.
Hope that helps to clarify.

ISE 1.2: Employee with personal device registration

Hi experts,
I'm aware of this discussion https://supportforums.cisco.com/discussion/11962026/ise-12-device-registration-mab-only-no-client-provisioning#comment-9371166
but looking for a detailed configuration to get following to work:
Employee's have access to the network with their corporate devices. No problem
Now employees need to be able to use their own mobile devices to get access. There is no definition of what devices are allowed.
II guess to let employees register their private devices with MAC address on MyDevice portal would be the most sufficient solution.
Does anyone have a detailed configuration or link how to achieve that?
Thanks,
Frank

Having BYOD access be based on mac address only is not really ideal and also not secure. A mac address can easily be spoofed and consequently your security policy can be bypassed. If you have a PKI environment you can take the EAP-TLS with SCEP approach:
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/116068-configure-product-00.html
If you don't have a PKI environment and don't want to mess with certificates you can still use a more secure method than MAC addresses. For instance, you can perform PEAP user authentication. You can create a "special" BYOD AD group and place the authorized users there. Then they can use their AD credentials to authenticate. In the authorization policy you can limit the access for those type of authentications via dACLs (switches) or named access lists (WLCs)
Hope this helps!
Thank you for rating helpful posts!

ISE 1.3 IOS 8.1 Unsupported Browswer Error in Device Registration Page

I recently upgraded to ISE 1.3. We are now getting unsupported browser errors in the device registration redirect page on ipad and iphone IOS devices running 8.1. We are running 7.6 as 8.0 was unstable with ISE1.2.1. The device registration redirect page worked fine with these same devices in ISE 1.2.1. Is there a work around short of turning off registration? The "mydevices" page seams to work, but does not populate the mac addresses of the devices like the device registration page does.

Are you using Safari or another browser? You need to use Safari as Chrome will show an error message like unsupported browser...
I did the NSP with an iPad iOS 8.1.1 and ISE 1.3 and it worked fine...
ISE 1.3 compatibility was just released today and says 8.0 is officially supported; does not mention 8.1:
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/compatibility/ise_sdt.html
Patrick

Missing device registration info

Similar Messages

Maybe you are looking for