Missing devices in MARS?

Hello,
I have a question regarding devices. I add a device then look for it in Monitored Devices after activation, etc, and its not there. However, if I go into add security apps to existing host, it shows up in the list. What the heck is going on here?
Same for if I want to retrieve raw messages, its not on the list.
thanks!

Reported devices added from a deleted LC into a rule do not properly replicate back to the LC if it is re-added
For further descriptions please follow the bug CSCsg04972.

Similar Messages

How to create a group of devices in MARS

Hi folks.
I have quite a list of devices which MARS pulls syslog from and the client's security policy requires to run periodic queries against those devices (they are 871 routers). Is there any way to create a group of devices and add it to the "Reporting devices" instead of manually checking every router.
Eugene

Anyone could suggest something???
I'll try to be more detailed. There's a custom rule which is created to run a query for a specific event type. The query is run against many devices and the list of devices added to MARS earlier is quite big. So when you configure the rule at "Reporting Devices" section there is a limited list of devices (see attachment). I wish I can have a custom device type which will include all devices in question.
Plus, why there's no "Select All" button for the right pane. This would be quite logical once you have a list devices showing in your right hand pane. Instead of going through all of them and click each one clicking "Select All" would be nice.

Java.util.MissingResourceException: Missing device property

Hi all.
I've installed:
Sun Java Wireless Toolkit 2.5.2 for CLDC
Java Platform Micro Edition Software Development Kit 3.0 Early Access ( i suposed that it isn't necessarly)
JDK 6 Update 13
NetBeans IDE 6.5.1 (All)
After instalation i run WTK - > open sample project -> run and get this:
Warning: Could not start new emulator process:
java.util.MissingResourceException: Missing device property
Project is building without problems but i can't run it ;/ In NetBeans i have similiar problem i can't run sample projects because i have this:
Starting emulator in execution mode
com.sun.kvem.midletsuite.InvalidJadException: Reason = 22
The manifest or the application descriptor MUST contain the attribute: MIDlet-1
I've re-installed everything many times without windows :) I tried to search solutions for that but i couldn't find anything usefull.
I will be very apreciate for helping me.
Edited by: grubasek on Apr 1, 2009 3:29 AM
i have of course more partitions and WTK, NetBeans, ME SDK 3.0 are installed on other than C: but JDK is installed on C: in program files where in path is space. It has any meaning?

Did you figure this out? I've got exactly the same problem. Same error that is getting reported. The resource missing is the AMConfig.properties file which is required for the Access Manager Policy agent. Agent doesn't work until I get the WebSphere config correct.
Thanks in advance.

Missing device registration info

After the infamous security breach of Sony's "secure" network, my device info I had registered last January is now missing. Looks like a reset of information. Also, I wasn't prompted to change my password when I logged into the Sony site as mentioned in the updated press release on Sony's site. I had to manually change my password; The issue I also have with the their passwords is I can't use special characters! Less secure in my book.

Thank you for your post.
There is further detail regarding this issue in a statement released on the PSN Blogs yesterday (5/4):
http://blog.us.playstation.com/2011/05/ ... entatives/
Keep your eye on the PSN blog for the latest up to date info on the status of the network:
http://blog.us.playstation.com
To keep current on the latest news and further updates with the Sony Online Entertainment network please visit here :
http://www.soe.com/securityupdate

Missing device link /dev/eth0

I just recently did an FTP install of base Archlinux. I smoothly transfered to udev with not problems.etc.etc. When I finally installed Xorg and the Xfce4 WM and some plugins. IE netload. I found that my /dev/eth0 device link was missing or uncreated. Now my problem is I don't know how the hell to make the link to the device, I researched it and found that /dev/eth0 is virtually linked to the kernel modules somehow. Yet I didn't find a way to create it. So can anyone help?

Other distro's dont have /dev/eth0.
It doesnt exist and never will.
What plugin is this you speak about? what are you trying to do?

LMS 4.0.1 - missing device model

Inventory jobs run successfully, but when running Inventory Detailed Device report, finding information missing under Chassis Model Name. Doing a MIB walk I do find Model name information is available under Standard Entitiy-MIB for the problem devices.
This is only occuring for Wireless AP 1200 (AIR-AP1232AG-A-K9) and select IOS Routers (870, 1811, and 1841). All other devices, except unsupported ones, are reporting properly.
I'm just a user of the system, but in talking with Administrators of the system - not finding the answer / cause / fix to resolve.
Is there something specific that needs to be set for these type of devices in order to pick up the model information?
Is there some update that would fix this?
Thanks in advance.

Due to issues at work, I have not been able to get back to this, but back now.
Here is a screen shot of the Missing Chassis Model Name information - also attached for readability;
Here is an excerpt of the ICServer.log that I believe is related to this;
com.cisco.nm.xms.xdi.DeviceAccessException: SnmpRequestTimeout on 10.111.0.202 while performing SnmpGet at index = -1
at com.cisco.nm.xms.xdi.DeviceContext.retrieveSysObjectID(DeviceContext.java:258)
at com.cisco.nm.xms.xdi.DeviceContext.getSysObjectID(DeviceContext.java:218)
at com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext.getSysObjectID(RMEDeviceContext.java:1067)
at com.cisco.nm.rmeng.util.rmedaa.RMEDCFactory.createUnpopulatedDC(RMEDCFactory.java:179)
at com.cisco.nm.rmeng.inventory.ics.util.RMEDeviceContextFactory.getDeviceContext(RMEDeviceContextFactory.java:125)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.getDeviceContext(CollectionController.java:1647)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:499)
at java.lang.Thread.run(Thread.java:662)
Caused by:
com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.111.0.202 while performing SnmpGet at index = -1
at com.cisco.nm.lib.snmp.futureapi.SnmpFuture.value(SnmpFuture.java:193)
at com.cisco.nm.xms.xdi.DeviceContext.retrieveSysObjectID(DeviceContext.java:255)
at com.cisco.nm.xms.xdi.DeviceContext.getSysObjectID(DeviceContext.java:218)
at com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext.getSysObjectID(RMEDeviceContext.java:1067)
at com.cisco.nm.rmeng.util.rmedaa.RMEDCFactory.createUnpopulatedDC(RMEDCFactory.java:179)
at com.cisco.nm.rmeng.inventory.ics.util.RMEDeviceContextFactory.getDeviceContext(RMEDeviceContextFactory.java:125)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.getDeviceContext(CollectionController.java:1647)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:499)
at java.lang.Thread.run(Thread.java:662)
Caused by:
com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.111.0.202 while performing SnmpGet at index = -1
at com.cisco.nm.lib.snmp.futureapi.SnmpFuture.value(SnmpFuture.java:193)
at com.cisco.nm.xms.xdi.DeviceContext.retrieveSysObjectID(DeviceContext.java:255)
at com.cisco.nm.xms.xdi.DeviceContext.getSysObjectID(DeviceContext.java:218)
at com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext.getSysObjectID(RMEDeviceContext.java:1067)
at com.cisco.nm.rmeng.util.rmedaa.RMEDCFactory.createUnpopulatedDC(RMEDCFactory.java:179)
at com.cisco.nm.rmeng.inventory.ics.util.RMEDeviceContextFactory.getDeviceContext(RMEDeviceContextFactory.java:125)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.getDeviceContext(CollectionController.java:1647)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:499)
at java.lang.Thread.run(Thread.java:662)
com.cisco.nm.xms.xdi.DeviceAccessException: SnmpRequestTimeout on 10.111.0.202 while performing SnmpGet at index = -1
at com.cisco.nm.xms.xdi.DeviceContext.retrieveSysObjectID(DeviceContext.java:258)
at com.cisco.nm.xms.xdi.DeviceContext.getSysObjectID(DeviceContext.java:218)
at com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext.getSysObjectID(RMEDeviceContext.java:1067)
at com.cisco.nm.rmeng.util.rmedaa.RMEDCFactory.createUnpopulatedDC(RMEDCFactory.java:179)
at com.cisco.nm.rmeng.inventory.ics.util.RMEDeviceContextFactory.getDeviceContext(RMEDeviceContextFactory.java:125)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.getDeviceContext(CollectionController.java:1647)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:499)
at java.lang.Thread.run(Thread.java:662)
Caused by:
com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.111.0.202 while performing SnmpGet at index = -1
at com.cisco.nm.lib.snmp.futureapi.SnmpFuture.value(SnmpFuture.java:193)
at com.cisco.nm.xms.xdi.DeviceContext.retrieveSysObjectID(DeviceContext.java:255)
at com.cisco.nm.xms.xdi.DeviceContext.getSysObjectID(DeviceContext.java:218)
at com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext.getSysObjectID(RMEDeviceContext.java:1067)
at com.cisco.nm.rmeng.util.rmedaa.RMEDCFactory.createUnpopulatedDC(RMEDCFactory.java:179)
at com.cisco.nm.rmeng.inventory.ics.util.RMEDeviceContextFactory.getDeviceContext(RMEDeviceContextFactory.java:125)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.getDeviceContext(CollectionController.java:1647)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:499)
at java.lang.Thread.run(Thread.java:662)
Caused by:
com.cisco.nm.lib.snmp.futureapi.SnmpReqTimeoutException: SnmpRequestTimeout on 10.111.0.202 while performing SnmpGet at index = -1
at com.cisco.nm.lib.snmp.futureapi.SnmpFuture.value(SnmpFuture.java:193)
at com.cisco.nm.xms.xdi.DeviceContext.retrieveSysObjectID(DeviceContext.java:255)
at com.cisco.nm.xms.xdi.DeviceContext.getSysObjectID(DeviceContext.java:218)
at com.cisco.nm.rmeng.util.rmedaa.RMEDeviceContext.getSysObjectID(RMEDeviceContext.java:1067)
at com.cisco.nm.rmeng.util.rmedaa.RMEDCFactory.createUnpopulatedDC(RMEDCFactory.java:179)
at com.cisco.nm.rmeng.inventory.ics.util.RMEDeviceContextFactory.getDeviceContext(RMEDeviceContextFactory.java:125)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.getDeviceContext(CollectionController.java:1647)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:499)
at java.lang.Thread.run(Thread.java:662)
Let me know if there is anything else needed.
Thank you.

Missing Device Manager Items

Any chance someone can tell me what "Base System Device" driver(s) are missing and where to get it from these
hardware id's? The machine is a Envy 810-170st.
PCI\VEN_8086&DEV_0EE3&SUBSYS_2ACE103C&REV_04
PCI\VEN_8086&DEV_0EE3&SUBSYS_2ACE103C
PCI\VEN_8086&DEV_0EE3&CC_088000
PCI\VEN_8086&DEV_0EE3&CC_0880
Thank you!
This question was solved.
View Solution.

Mario,
There are 4 drivers under the Driver - Chipset (4) link.
Do you want me to install the "Intel Management Engine Interface Driver" or one of the others?
Ron

Macbook pro 17" 2.6ghz missing device

I've got a missing USB device when I do an install on a newer (non penryn) Macbook pro.
I'm also getting my Isight showing up routinely as a "USB video device" and/or being unrecognized... and every now and then my USB starts beeping on and off saying I've got stuff hooked up as 1.0 instead of 2.0 (even if I don't have anything hooked up)
I'm running the 2.0 Boot Camp off the install disks.
BTW... how does apple release driver updates for Boot Camp?
-=JEff

Apple drivers will be available by running Apple Update under Windows, the same way you would update the Windows version of iTunes.

Missing Device Backups in iTunes

After a new installation of Lion I restored iTunes from Time Machine. For some reason none of my Device backups are showing in the preferences pane. Any recommendations on how I can find the missing files in Time Machine and restore them to iTunes would be appreciated.

It only appears when a device is connected. If you have a device connected and it is not recognized, the following may help:
Windows computer: http://support.apple.com/kb/TS1538
Mac: http://support.apple.com/kb/TS1591

"Missing" device not missing

For one of our clients the OnPlus agent is installed and has been working great for 6+ months. A week back one of the switches went "missing", on checking the dvice its pingable, appears in cdp tables and is physically there and up.
We tried removing it and re scannign for it, but it didnt appear. We finally had to manually add it just so it would appear
On some further checking, the portal and the agent seem to have a missmatch in information the Portal shows the agent is FW version 35.46 and the Box itself (connected via the portal) show the latest version (37.59), the box is ON100-K9 v02. We had a similar FW missmatch at one of our other sites, that has a V01, but put this down to a hardwasre issue, the FW rectified itself over christmas break, and i'm pretty sure while that was going on the box we are talking about was showing it had the 37.59 version.
Bearing in mind that everything was fine untill a week ago, and all the other devices are running fine,anyone have any ideas how we can get the switch back without having to kill the box and start again?

Peter,
Can you send me a PM or email me at [email protected] with the agent and customer names. There seems to be something odd going on with this site. I'd like to investigate both the sistuation with the device sticking on an old version, and with this invisible switch.
FWIW, the next release of the firmware should rationalize this "37.59" version number, which is really and internal value and not readily translatable to the published releases. The new version should look something like "7.7.2.123". The "7.7" is the release revision, the "2" indicates this is production firmware for the device, and the "123" is the build number. This value should match the device's login splash page.

Missing device name when scheduling recording on remote DVR

Just an observation:
Prior to the new release, when on my 2500, I schedule a recording on the [remote] DVR, it used to say "DVR Alert" And then show the name of the DVR device. Now it no longer displays the name of the DVR. It just says "Recond on" (no name).
Come to think of it, the name is also missing (chedule on") when I schedule the recording too.
It's not a big deal, since I only have on DVR, but it is annoying.
Also, when you stop a recording (on a remote DVR), wan't an option to delete it presented (at the time)? I thought this was the way it worked, now it's a two step process (have to go back to DVR menu). Maybe it's only when on the DVR?
Eric

Hello Eric,
You are correct. With the new update, stopping a recording in progress no longer brings up the "Delete Recording?" option. This goes for the remote boxes and main DVR.
FCN

Missing Device Files

We had an issue with our SAN this morning and we were missing some device files but not all. I cannot seem to find anything that shows what device files ASM is expecting to see for each disk group. For example, we have a data disk group with 10 LUNs assigned. Two of the LUNs were not found and there were no device files. How do I know what device files are missing?

>
How do I know what device files are missing?
>
What is your 4 digit Oracle version?
The V$ASM_DISK view will tell you what it found and what is missing.
See the Database reference
http://docs.oracle.com/cd/B28359_01/server.111/b28320/dynviews_1020.htm
>
V$ASM_DISKIn an Automatic Storage Management instance, V$ASM_DISK displays one row for every disk discovered by the Automatic Storage Management instance, including disks which are not part of any disk group. In a database instance, V$ASM_DISK only displays rows for disks in disk groups in use by the database instance.
>
There are several other V$ASM views that have other information that may be of interest
>
V$ASM_ALIAS view, 7.17
V$ASM_ATTRIBUTE view, 7.18
V$ASM_CLIENT view, 7.19
V$ASM_DISK view, 7.20
V$ASM_DISK_IOSTAT view, 7.21
V$ASM_DISK_STAT view, 7.22
V$ASM_DISKGROUP view, 7.23
V$ASM_DISKGROUP_STAT view, 7.24
V$ASM_FILE view, 7.25
V$ASM_OPERATION view, 7.26
V$ASM_TEMPLATE view, 7.27

Missing device data

Device data missed but device register data is still there, how can I recover the device? (re-install the same device)
Thank you.

I tried EG34 but it said device info record already exists for mat. no XXXXX and serial no.XXXXX.
'You have attempted to create a piece of equipment with material number XXXX and serial number XXXX. However, there is already a device info record in ISU for this combination of material and serial number.
The register data is there but device date is empty.(i used es32, enter installation#->click device)

Missing Devices

Hello
6 iDevices are registered within 3 accounts in iCloud. They are all configured identically how to behave with location services.
Using find my iPhone I have strange results. In the table I show, what I can see on the different t iPhones and iPads
and additionally the results when logging into the iCloud using all 3 accounts.
The points in question are the pink ones in the table.
So, is there an explanation, why Walter from his iPad and from his iCloud Account can see all the info of the others, while his infos, including location, only can be seen from Mary's iPhone and iCloud account completely (and his own iCloud account). But why from Tom's devices to see the location is denied?
And why Mary's iPad only sees her own devices?
One impact might be, that Walt's iPad used to be Tom's iPad some months ago.
I turned off all devices. I deregistered and reregistered all devices. I checked the settings again and again. Nothing helps.
The location of Walt's iPad stays hidden only for Tom, who, by the way, is the organizer and Mary's iPad doesn't see the devices of the other accounts.
(My old iPhone is not in the scope. It is seen from everyone (except Mary's iPad) but has very limited view of the others. I blame the SW version.)
Do I miss something completely?
Thanks!
Thomas

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
 Cheers, Tom

Download the missing device driver

hai,
i am installing Windows 8 Pro ,but missing some device driver
Device Ids:
PCI\VEN_10EC&DEV_5229&SUBSYS_183E103C&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_183E103C
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
So please replay the link adderss to solved him.

The 2nd Driver On the list is Realtek PCIE Cardreader.
Here is the link--> Driver
The 4th one's link is Driver 4th
Hope this help.

Missing devices in MARS?

Similar Messages

Maybe you are looking for