Missing DIFxINST64.exe when trying to upgrade to iTunes 11.1.6

When I start iTunes on my pc, I get prompted to upgrade to the latest version, which currently is 11.1.3. It goes through downloading fine but when it goes to install, I get an error that says: Windows cannot find 'C:\ProgramData\34BE82C4 .. blah blah \x64\DIFxINST64.exe'. When I follow that path, this exe file is not in the x64 folder. I searched my pc looking to see if it maybe was in another folder but it could not find this file. Any ideas what this does and where I could find a place to download it?

Temporarily turn off ALL of your antispyware/antivirus software and try it again.

Similar Messages

I receive error code 103 when trying to upgrade to itunes 11.0.2?

I'm trying to upgrade to iTunes 11.0.2 on my iMac and the upgrade will not install but gives error code 103?
Anyone who has a clue?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

2330 Error when trying to upgrade to iTunes 9.0.1

I'm unable to successfully upgrade to iTune 9.0 or 9.0.1. In the middle of the install, it tells me that the file is corrupt and gives me a 2330 error code, and rolls back the action. Anyone else with this problem? More importantly, anyone figure out how to install iTune 9.0.1? I've tried disabling my Norton Antivirus before the install, but have same problem.

hi.
you have to use get by key method for updating the user defined fields..like below..
sales order i am upating.
    Dim vOrder As SAPbobsCOM.Documents
                    vOrder = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
              Dim s As String
                    If vOrder.GetByKey(150) Then
'here 150 is the doc entry i am going to update the fields.
Header:
oDocument.UserFields.Fields.Item("U_XYZ").Value = "Test";
Line:
oDocument.Lines.UserFields.Fields.Item("U_XYZ").Value = "Test;
Somet times you have to convert it to string.
myVar = oDocument.UserFields.Fields.Item("U_XYZ").Value.ToString();
MessageBox.Show(s)
                    End If

I am getting this number when trying to upgrade iphone/itunes -402653138?

please help

For advice on that one, see the Error 40265xxxx: section of the Specific error codes and resolutions section of the following document:
Update and restore alert messages on iPhone, iPad, and iPod touch

I keep geting this message when trying to udate to Itunes 10.5.1 "There is a problem with the Windows Installer package. A program run as part odf the setup did not finish as expected . Contact your support prersonel or package vender"

I keep getting this message when trying to upgrade to Itunes 10.5.1
Driving me nuts trying to upgrade. What can I do to correct this?
"There is a problem with the Windows Installer package.
A program run as part odf the setup did not finish as expected .
Contact your support prersonel or package vender"

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

New iPod touch. Error message when trying to sync to iTunes first time: "Pairing record missing. Can't sync." Nothing in Support addresses this. Help!

I havev a new iPod touch 4th gen. When trying to sync to iTunes first time, I got this error msg: "Pairing record missing. Can't sync." Nothing in Support addresses this. Help!

See if the previous discussions with the same error will help you. Some of those are listed on the right side of this page under the heading "More Like This".

IMac shuts down when trying to upgrade from Tiger to Leopard

My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
Thanks

rk87,
Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out.

TS3694 Hi I am getting an error 3194 when trying to upgrade my ipad 2 to IOS v 5.1, any tips?

Any advice on the eror code 3194 when trying to upgrade to IOS v5, i cannot download the lateste version of iTunes and cannot do a restore because of this error?
Thanks

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Safari keeps saying missing plug in when trying to veiw video where do i get pluh in, safari keeps saying missing plug in when trying to veiw video where do i get pluh in

safari keeps saying missing plug in when trying to watch video where do i get plug in im using 10.6.8 2.4 ghz intel core 2 duo

That is all it says I went to watch the video on the iPhone 5 clicked on video and the video player box came missing plug in came up and the little black circle just kept spinning and that's it it works fine on google chrome Thanks in advance for help

Issue when trying to upgrade FB 4.7 to AIRDSK 3.6

Hi,
I'm desperately trying to upgrade FB 4.7 to AIRSDK 3.6 since 3 weeks.
I've followed the various solutions found on forums and the various processes displayed by the "helpx.adobe.com" pages, but none of them works.
So please, if a member of Adobe Support Team or someone who succeeded to perform the upgrade reads this, I need help and if possible a detailed strp by step process.
Thks in advance for answers.

I think i tried all the available ones, and there are many. Why can't we
have a definitive automatic upgrade solution instead of having to do
such a number of manipulations ?
Le 14/03/2013 04:41, Flex harUI a écrit :
>
Re: Issue when trying to upgrade FB 4.7 to AIRDSK 3.6
created by Flex harUI <http://forums.adobe.com/people/Flex+harUI> in
/Flex/ - View the full discussion
<http://forums.adobe.com/message/5146932#5146932

Error code 23 when trying to upgrade???

Error code 23 when trying to upgrade/ also have lost wi-fi connection. A coindence or related problem?

Hi Dauby51,
You may need to uninstall and reinstall PSE 11, then reapply the updates.
Make sure you don't have any disk cleanup utilities that might be running during and after the install that may be altering any of the files installed or installation paths.
Give this a try and let me know how it goes,
Regards,
Pete

Missing File error when trying to install HP 5610xi using Windows 7 64 bit download

I have tried several times to download and install the software and drivers for my old 5610xi on my new computer running Windows 7 Home Premium 64-bit OS. I keep getting a "missing file" message when trying to run the download, and it will not install. Can someone please help!?!?

Hi computeir, sorry to hear that you are having issues with getting your printer installed on to your computer. If you are connecting the printer to the computer with a usb cable, please remove it from the printer and the computer and set it aside. Please click the link I have provided for the HP Printer Install Wizard for Windows.
The installation will prompt you as to when to connect the usb cable. If you are still having issues, please feel free to write back.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Error when trying to upgrade scsm dw 2012 sp1 to r2

Hello,
when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
does anyone faced and successfully resolved this problem?
regards,
Ilgar
Regards, Ilgar Khalilov.

This issue might happen if you have a space in the DW Management Group name.
Maybe this blog post from Anders Asp is helpful:
Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
Andreas Baumgarten | H&D International Group

When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle, after it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

Hi bahaluly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
Get help with iOS update and restore errors - Apple Support
Solve network errors
Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Cheers,
Mario

Missing DIFxINST64.exe when trying to upgrade to iTunes 11.1.6

Similar Messages

Maybe you are looking for