Missing Dolby settings in Compressor

When I "show package contents" in Compressor (v 2.0.1), my Dolby settings are all there. However, when I actually use Compressor, the Dolby settings are not available. Anyone know how to get them to appear?
Thanks for your input.

Compressor reads its presets from ~/Library/Application Support/Compressor/
It actually stores aliases in there to the presets that you're finding when you "show package contents".
Try removing all the aliases from the above folder and relaunch Compressor. It should recreate all the aliases for you and you should get the presets back.
If you've created any custom settings, make sure to put them back in that folder when you're done.

Similar Messages

Can I Encode to These Settings with Compressor??

Greetings,
I need some help from you good people.
I have been tasked with preparing our video program for an SD Television Broadcast.
In my many years of using Final Cut, I have never had to export for an official SD Broadcast. So I declare up front that this is a new world for me from web and DVD creation.
But I seem to be having a hard time matching all of these settings using an MPEG-2 Transport Stream in Compressor. So I want to know if I can use Compressor to match these settings or will I miss some of what the station wants?
I've tracked down most of the major settings in Compressor. I highlighted below in bold and red what I am having trouble with.
I will also add that I was trying to work with the GOP I and P frames settings but do not see a choice for selecting 1 frame for each one.
Most of my other issues are with the audio settings. I went to "Extras" and selected Multiplex but don't have any other control over the audio.
So any help would be much appreciated. Thanks!
These are the requirement sent from the station:
(BOLD AND RED are what I need help with)
VIDEO:
MPG TYPE: MPG-2
STREAM TYPE: PROGRAM (VIDEO + AUDIO)
VIDEO RESOLUTION: 720x480
FRAME RATE: 29.97 (NON-DROP) 4:3 DISPLAY
FIELD ENCODING: TOP FIELD FIRST
DEINTERLACING: USE TOP FIELD
BITRATE TYPE: VARIABLE (If they say a variable type, why would they state a Constant Bit Rate below??)
RATE CONTROL MODE: MODE 1
CBR BITRATE: 8000Kbps
GOP STRUCTURE:
I FRAMES: 1
P FRAMES: 1
PROFILE ID: 4:2:2
LEVEL ID: MAIN LEVEL
AUDIO: MPEG 1
AUDIO MODE: MPEG LAYER 2
AUDIO FREQUENCY: 48000 HZ STEREO
BITRATE: 256 KBPS* VARIABLE BITRATE EMBEDDED
MODE: STEREO
NO DE-EMPHASIS
MULTIPLEXING TYPE: MPG-2
Thanks in advance!
-Al

Disclosure: I haven't prepared a show for SD Broadcast either, but have been working with Compressor/DVDStudio Pro for a decade.
Looking at the specs, there are only a couple of unclear areas... the big thing is, they're asking for a Program Stream rather than Elementary Streams.
I looked into that codec and it seems capable of handling the task once you clear up the VBR/CBR and interlace/de-interlace questions.
Good luck!

My data tab is missing in settings on ipad

My data tab is missing in "settings" on my ipad

What iOS version do you use? I'm nof familiar with the "data tab." Where did you notice it before?

Settings in Compressor 3.5 for HDV Video

Hi, for a long time i search the perfect settings in Compressor to play my home movies on the actual Mac mini and also the PS3 without any other transformation. i think 1280 * 720 (720p) is the best, but witch settings in the Compressor is perfect?
Is there any PAL settings to download, i doesn't found a good one in Compressor taht works....

You need to select an output: MP4, MOV or the Apple TV settings. If you have Compressor 3.5 there are templates for Apple TV that work quite well. And I think, and I'm sure someone is ready to correct me, that either MP4 or MKV will play on the PS3

Missing Customizing settings for software component ECC-DIMP

Hi all,
While running the T-code IE4n I am getting this error:
Missing Customizing settings for software component ECC-DIMP
This is working fine in IDES ECC 6.0 ,Could u please tell me how to resolve it for my othersystems.
Thanks
Yinyan Lu

Dear Yinyan Lu,
Please, have a look into the SAP note 767108 (IE4N: Problems due to missing notification Customizing)
Solution
To correct this error, implement the correction instructions contained
in this note or import the relevant Support Package.
In packages
o DI in Release 4.6C2
o DIMP in Release 4.71 and higher
o EA-APPL as of Release 4.7 Extension Set 2 and higher
notifications are created when installing and dismantling. In this case,
Customizing must be complete, otherwise errors will occur.
In DI Release 4.6C2 and DIMP Release 4.71 (and higher),
follow the following Customizing path:
Plant Maintenance and Customer Service
    -> Maintenance and Service Processing
      -> Maintenance and Service Notifications
        -> Determine Properties of Notifications for Installing and
Dismantling Parts
Always maintain the notification type for installation and for
dismantling.
Follow the following Customizing path on EA-APPL as of Release 4.7
Extension Set 2 (and higher):
follow the following Customizing path:
Plant Maintenance and Customer Service
    -> Maintenance and Service Processing
      -> Configuration Control
        - > Determine Properties of Notifications for Installing and
           Dismantling Parts.
Always maintain the notification type for installation and for
dismantling.
What must you do if you do not want to use notifications in IE4N?
1. You must always maintain the notification type in accordance with
    Customizing described above.
2. Create an individual, empty implementation for the BADI
    BADI_CCM_NOTIF_GENER. To do this, proceed as follows:
a) Execute transaction SE18.
b) Specify BADI_CCM_NOTIF_GENER as the BADI name.
c) Use the menu <Implementation><create> to create an individual
       implementation with a corresponding name in the Z namespace.
d) You enter the BADI Builder. Name the implementation, and then
       save and activate your implementation. It is important that the
       methods CREATE, FILL_CUST_DATA, MODIFY, SET_HEADER_MESSAGE, and
       PRINT_NOTIF are empty.
Note that these steps are required, since the BADI
    BADI_CCM_NOTIF_GENER is equipped with a default source code that
    includes the use of the notification.
As of ECC600, Note 1368876 replaces error message IEN 126 with error
message IEN 026, which is more precise.
Caution:
o The error message mentioned above indicates that Customizing is
         missing. To correct the problem, you must perform the relevant
         Customizing settings for transaction IE4N.
o As of ECC600, you do not have to activate the DIMP switch (this
         may not be useful).
o For more information, see Note 1368876.
I hope, it helps.
Best regards,
Roland

Color settings in Compressor

When I save a H.264 movie from Final Cut 7 the night scenes seem to have a lot of noise now. Is there a way to reduce the noise in the color settings in Compressor?

I think color output space is worth looking into. I need to export as a H.264 file, it is what's required by the film festival. Also, in the original ProRes files in Final Cut there is no noise at all, very clean, also very clean exported as a self contained Qtime movie, uncompressed.
The film was color corrected by a professional color grader so the problem is in the software settings with the H.264 codec.
Color Space Output in Compressor:
http://books.google.ca/books?id=9eGM9VD_37UC&pg=PA122&lpg=PA122&dq=output+color+ space+in+compressor&source=bl&ots=1EKI-Q1ktm&sig=Pr1vRm8A1svej-bmRcL73r7lCxE&hl= en&sa=X&ei=d6VEUYvwHMqLrAGjr4F4&sqi=2&ved=0CF0Q6AEwBg#v=onepage&q=output%20color %20space%20in%20compressor&f=false

Missing projet settings and codecs on Premiere 5.5?

Missing projet settings and codecs on Premiere 5.5
when i open a new project in premiere, the most of the projcet settings/codecs are missing

Hi.
You can easily restore all of your apps, photos and podcasts.
If you activated the iCloud service before updating, your Apps will be storaged "in the cloud" and ready to be re-downloaded. Otherwise, go to App Store and choose "Updates". Here, in the top of the screen, is the "Purchased"-button. Tapping here will give you a complete list of all your downloaded Apps, ready to be re-downloaded.
As for your podcasts, plug your iPhone to your PC/Mac. Single-click your iPhone-device in the menu on the left. Once the iPhone-window appear, go to the tab-menu in the top of the screen and choose 'Podcasts'. From here you can decide which podcasts should be sync with your device.
I hope this was helpful.
Best regards.

I cannot see the Vidoe displayed on the screen, only hear the sound. I am missing a component? Compressor, etc. I just downloaded the latest version of Quicktime for Microsoft, please help.

I am not able to view my video taken with a memory card only the sound? I am missing a component? Compressor, etc. I just downloaded the latest version of Quicktime for Microsoft, please help
I can see it on Windows Media? Need help on this.

It says SEDG 720X480 2:1 Mono. Video came from Sd memory card taken with a Samsung Video Camera.
Strangely enough, as a FourCC, SEDG is defined as "MPEG-4 hardware and software codec used in Samsung digital video products." Not a Windows or Samsung camcorder user but THIS WEB PAGE may be of some assistance.
Also I will need to view a CD recorded by the same camera (DVD-RW) file extensions are VIDEO_RM.BUP
VIDEO_TS.IFO, VIDEO_TS.VOB, SAMSUNG.IFO So far these files don't open even with Windows Media.
I don't know what to do to be able to open up these files save them on my Hard drive and then be able to upload them to YouTube. Any Ideas?
IFO files tell how the video content is segmented and where the video data is located. BUP files contain back-up IFO information. VOB files contain actual multipled audio/video data. A DVD formatted to play in a commercial DVD player normally contains a series of files named "VTS##_#.VOB" where ## refers to the "title" series and "_#" (where # is not a zero) refers to the order in which the video title file data is played.
Again, I am neither a Windows user nor an athority on Samsung VIDEO_RM folder structures. However, if your disc contains both a VIDEO_RM and VIDEO_TS folder, then I would normally assume the VIDEO_RM folder is present for legacy purposes and/or to provide information about the refording device while the VIDEO_TS folder actually contains the video object (VOB) file data. In any case, as I am not familiar with what software is available for muxed MPEG-2/AC3 editing/conversion on a Windows platform, I would try viewing the VOB files in an application like MPEG Streamclip (free). If you can play the Audio and video content (be sure to read the MPEG Streamclip requirements regarding codec installation), then you can edit (merge and/or trim) the raw data and convert it to a format compatible for YouTube uploading. (I.e., MPEG Streamclip is commonly used on the Mac for this type of work flow and the app is also available for Windows use.)

Update/Migrate Settings to Compressor 4

I spoke with someone pretty knowledgable about Compressor who suggested having the old Compressor 3.5 application open and drag and drop the old settings in to Compressor 4 Settings window to exchange between the two since Compressor 4 doesn't have immediate access to your old settings. Since Compressor 4.0.2, it looks like Apple has disabled the ability for the two programs to be open at the same time and I'm working on a new machine - how can I bring my settings from Compressor 3.5 to 4? Why doesn't Compressor 4 offer to import the previous settings? Is this a legacy feature thing? Should I really start from scratch?
Thanks!

You can't export uncompressed in iMovie. By default iMovie wants to use H.264, which is way too highly compressed to do anything with beyond showing off as is. You'd need to use Share > Export Using QuickTime Conversion. There, you have an Options button, where you can set it up to be a ProRes 422 QT movie. Take that into Compressor. Be careful of the Fram Size, as iMovie wants to only give you a tiny frame size by default, make sure it's the native frame size/rate as the original camera shot it in. I don't know if Finalizing a project helps at all, but I assume those are just H.264 files, too.
If you want to move to this higher resolution and more complex transcode type of work, FCP X may be a consideration. iMovie wasn't really designed to work with Compressor really.

(App) Restore Missing Quick settings

Some of you have noticed that some of the quick settings seemed to have disapeared. Samsung has released an app to restore them - Direct Link - Quick Panel Restore Samsung releases app to fix missing quick settings issue on the Galaxy S6 and S6 edge

Hi Suesbi,
Which password are you being prompted for? The password you created as a backup to the fingerprint unlock? Or the Google password which will be asked if you get the backup password for the fingerprint unlock incorrect too many times.
If you are unaware of either password then you won't be able to unlock the phone. These are security measures put in place by Google. If you have forgotten your Google account password then you'll need to completely reset the phone which means you'll lose everything off the handset.
f this is the case I'd suggest connecting your phone to a computer and transferring everything off you want to keep and then go ahead with a hard reset via the phone buttons.
-Matt W

Just bought iPad mini 2 last week and FaceTime is missing under settings. Even under restrictions , facetime can't be found. I already reset everything but it's still the same, no facetime. Pls help me

Just bought iPad mini 2 last week. FaceTime is missing under settings. i can't even find it under restrictions. I have reset it but it's still the same, no facetime. Pls help me...

FaceTime is not available on devices purchased or used in certain countries, including Saudi Arabia and the United Arab Emirates. This is by government decree. The FaceTime app can't be downloaded or installed on these iPads.
 Cheers, Tom

How do I change export settings in Compressor 4?

In the old compressor, I could export a movie and choose all my own settings pertaining to size, quality, streaming or not, keyframe rate, data rate, compression type, aspect ratio, etc..., same was true of the old Final Cut. So in making FCP X, they removed that functionality and forced me to go through Compressor to have that ability. Now they've upgraded Compressor and, apparently, removed that functionality from there, as well. So where do I go to have control over any of that? Is it possible anymore? Come on, Apple, don't make it more difficult. I'm all for upgrading a software's interface to make it more user-friendly, but don't take away functionality, please.

Found some info...
Had to save the export to the custom area, but the main thing I was missing was to show the inspector window. Once there I could manage all the settings I was complaining about
Peace. Thanks, Apple. Sorry for jumping the gun.

Retrieving Missing Sync Settings When Upgrading From an Older Version of Firefox to the latest version.

I initially set up my Sync account using an add-on for an older version of Firefox and have since upgraded to the latest version. But now my browser acts as if I don't have a sync account set up at all. When I attempt to create a new account, it says that my email address is already being used which tells me that my sync information is still on the the servers. So how do I retrieve my sync settings when settings are missing within my browser?

I resolved the problem in Snow Leopard by logging out of my (admin) account and logging into my daughter's account on the same machine. She doesn't have admin privileges, so when I tried to install Firefox 4 in her account, I had to authenticate with my admin identity and PW. Installation went smoothly after that. My guess is that you could also simply create a new account on the same machine and install Firefox 4 from that. I have no idea why this works.

Mail contacts calendars missing in settings after 3.0

After I upgraded to the 3.0 firmware, the mail contacts calendars section under settings is missing completely. Anyone experienced this or know of a fix short of wiping the phone?

I can confirm that what /Esnes/ suggested fixed the problem of having no Mail, Contacts, Calendars option in Settings.
I wonder what other options are m.i.a. due to apps being 'hidden' or 'tucked away' in a 'folder'? Has me curious.
Thanks, /Esnes/! No idea why contacts are sorted by Last, First by default... maddening!

Sent items option missing in settings

Hi,
I'm trying to help out a friend who has been having problems with their BT Yahoo email account that was compromise a few months back.
They have gone through the suggested steps (http://bt.custhelp.com/app/answers/detail/a_id/39411/) to ensure the account it now secure, but are finding that sent items are not being saved.
In the account settings, there is supposed to be a tickbox "Save a copy of the message in the Sent folder" but this is missing.
Is there any other way of activating the saving of Sent Items, or is this some sort of bug/security measure.
Many thanks.
Solved!
Go to Solution.

I presume you are talking about webmail. If your friend has not been migrated and is still on the old BTYahoo mail, click on the cog icon in the top right hand corner and select 'Mail options'. Tick the box 'Save a copy of the message in the sent folder'. If they have been migrated to BTMail, I don't think the option exists, it automatically keeps a copy in the sent folder.

Missing Dolby settings in Compressor

Similar Messages

Maybe you are looking for