Missing driver in Update Retriever / System Update

Hi,
We are missing a driver in Update Retriever for the T540p model:
The driver is also missing in System Update, when we query Lenovo repository directly.
Neither is the driver available for download manually on the support page.
Device 8086:08b2
"Intel(R) Dual Band Wireless-AC 7260"
http://pci-ids.ucw.cz/read/PC/8086/08b2
T540p (20BF-A0FHMD)
BIOS: GMET59WW (2.07) 2014-02-12
ECM: GMHT25WW (1.10)
ME firmware: 9.0.22.1467
Windows 7 pro SP1, x64
Lenovo could you please add this driver to Update Retriever?
Our deployment of this model is pretty much crippled because of this, since we cannot deliver systems without wireless drivers.
Thank you.

dhjensen wrote:
parkerjnc wrote:
We are half way there. It should show up after the next catalog refresh which I'm expecting to happen overnight. Will check it in the morning and escalate if not showing up.
I just checked today and still no luck.
A new version of "ThinkVantage Active Protection System (64bit)" is all i could find for the "3354-Windows 7-English" query
/Daniel
I will correct that. We had approved our own "Costum update" with the same update id. After removing that the update appeared as exspected.
Thank alot for being very helpfull.
/Daniel

Similar Messages

Hotkey Features Integration not detected by update retriever / system Update

Hi Lenovo
I suspect there might be an error in your metadata for the package 81vu13ww "Hotkey Features Integration"
It is not offered through systemupdate or update retriever.
in the update retriever program folder i have been looking at the file "C:\Programmer\Lenovo\Update Retriever\session\2243-Windows XP-DA-QuestResponse.xml" and when searching this file for "81vu13ww" i find a section like this:
- <descriptorFile>
<fileName>81vu13ww_2_.xml</fileName>
<fileDescription>Hotkey Features Integration</fileDescription>
<version>3.10.0000</version>
<releaseDate>2010-05-19</releaseDate>
<size>6237</size>
<url>81vu13ww_2_.xml</url>
<mode>ASCII</mode>
- <categories>
- <categoryBrandFamily>
<category>Utility</category>
<brand>Notebooks and handhelds</brand>
<family>ThinkPad T500</family>
</categoryBrandFamily>
</categories>
</descriptorFile>
Note the "URL" key is just a filename but when looking at all the other updates they all have a fully qualified url like this:
<url>http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/81u711ww_2_.xml</url>
Can you help fix this?
Regards
Søren Lambæk
IT Admin
KPC Herning A/S
Denmark

Hi again
Looking at the TVURLog file from a session i get this:
2010-06-21 , 08:51:42
ved Tvt.FileDownloader.DirectFileDownloader.StartDownload()
Message: Uri to download-> https://download.lenovo.com/ibmdl/pub/81vu13ww_2_.xml
Info 2010-06-21 , 08:51:42
ved Tvur.Gui.ProgressThread.ReportNewPackagesProgress(Int32 start, Double factor, Int32 numStep)
Message: GUI reporting progress
*****MyProgress=18
*****Current=23
Info 2010-06-21 , 08:51:43
ved Tvur.Gui.ProgressThread.ReportNewPackagesProgress(Int32 start, Double factor, Int32 numStep)
Message: GUI reporting progress
*****MyProgress=19
*****Current=23
Info 2010-06-21 , 08:51:43
ved Tvt.FileDownloader.DirectFileDownloader.StartDownload()
Message: Error for-> https://download.lenovo.com/ibmdl/pub/81vu13ww_2_.xml
Fjernserveren returnerede en fejl: (404) Ikke fundet.
Exception:
Message: Fjernserveren returnerede en fejl: (404) Ikke fundet.
Type: System.Net.WebException
ved System.Net.HttpWebRequest.GetResponse()
ved Tvt.FileDownloader.DirectFileDownloader.StartDownload()
Info 2010-06-21 , 08:51:43
ved Tvt.FileDownloader.HttpsFileDownloader.StartDownloadProcess()
Message: Download failed because the file https://download.lenovo.com/ibmdl/pub/81vu13ww_2_.xml can't be retrieved from the server. Error: NotFound
So i guess my assumtion regarding the URL is correct

UPDATE RETRIEVER / SYSTEM UPDATE

Hello everybody,
I think I'm going crazy because of this software (Update Retriever).
I installed it fine, followed the documentation.
Let's say I add a type of Machine (8808, ENG, XP), I then check the updates for this machine with the same results all the time.
No Updates Available.... How can there is no updates for this machine.... I tried a bunch of other machines too... same results...
Please Help!!!!!
Martin

Hi msauve,
> I think I'm going crazy because of this software
WELCOME TO THE CLUB !
I can't connect to the external update-servers from Lenonvo since one week,
the software does not work on virtual-machines, although you select "english"
you get updates for Lenovo-software in lots of different language, ...
Addendum
Wow : Now I finally got a connection to the server again, and i made a screenshot
of the available english software ---> Klick me !
cu,
Lothar
Message Edited by Lothar on 07-31-2008 10:56 AM

T540P Update Retriever System Update Repository Issues

Hi Community,
currently i have to deploy T540p Thinkpads and have several issues with the Installation of Drivers and Software.
1. Intel WLAN Driver ist not beeing downloaded from update retreiver, only a Realtek driver! Please fix!
Our Device: System-Modell 20BE0041GE have an Intel WLAN-Card! VEN/DEV 8086/08B2
2. internal Camera Installation asks if the Microsoft Driver should be replaced! Please fix and overwrite! or give us any parameters for the China-Installer! ggca17ww
3. The Bluetooth and HD-Graphics Drivers for the T540p displays a Reboot-Warning-Message while silent rollout!
I had to change the reboot type from 1 to 3 to stop these messages. I never saw these messages before.
I call the tvsukernel.exe with following parameters:
/CM -search A -action INSTALL -repository \\servername\sharename -includerebootpackages 1,3,4 -noreboot -noicon
Please Help

As far as item 3:
Refer to the SU 4 deployment guide, page 61. ( <<<<<you probably are aware of this<<<)
%ANYPATH%\Thininstaller.exe /CM –search R
–action INSTALL –noicon
–includerebootpackages 1,3,4 -noreboot
Installs all critical and recommended packages
with specified reboot types without displaying a
balloon tooltip from the application icon in the
notification area after the installation is completed,
and suppresses the system reboot for packages
with reboot type 3.
===
Bluetooth is a reboot type 3, reboot required was in the one driver I pulled up. (realtek).
Multiple bluetooth drivers are listed on the catalog page. I will look later and see if any are coded reboot type 1.
http://download.lenovo.com/catalog//20BE_Win7.xml

Updating Lenovo System Updates

Lenovo Application Interface update will not install. Seems to download OK. Tried installing maually and later but neither works. What's up with that?
thanks

What is your machine type and model? What operating system and version, ie win7 pro? Was this update via System Update or manual download from Lenovo. If manual download, what is the .exe name of the install package. What are the symptoms of the install failure, ie any message, error screens, etc.

Broadcom driver not working after system update on 10/10/2014

Yesterday I updated my system (pacman -Syyu) and after rebooting my wireless card is no longer detected by the operating system. I have a 15 inch macbook pro (late 2013) with a broadcom BCM4360 wireless card. It was tough to get working in the first place, but eventually I got it to work with the broadcom-wl-dkms driver. The package is still installed, so I have no idea what to do because I have tried all of the available broadcom driver packages that I know to exist.

Did you rebuild the wireless driver after updating the system? I've never quite figured out how to deal with the dkms variation of the drivers so you are on your own for the correct syntax (surely in the wiki somewhere), but I know that for my BCM4314 with the broadcom-wl driver, every time there is an update to the kernel, I need to rebuild the broadcom-wl driver (even if broadcom-wl itself didn't change) so that the wl.ko module shows up in the appropriate place in the kernel modules directory.

Missing HDMI1 in xrandr after system update

Hey archlinux crowd,
I am running arch on my (now 4 month old) Samsung Ultrabook NP940X3G.
It worked out-of-the-box immediately. Nice!
But probably a month ago a system update (which included intel drivers) shredded my external port. HDMI1 was missing from xrandr, instead DP1 and VIRTUAL shows up in addition to eDP1 which is the actual laptop screen.
I tried to investigate but stopped soon. Eventually, another system update a week later fixed the problem.
Now, after updating the system two days ago the same error occurred again. Reboot and HDMI1 is replaced by those mentioned fellas.
Anyone with similar problem or ideas?
$ lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
$ lsmod | grep intel
intel_rapl 17356 0
intel_powerclamp 17122 0
kvm_intel 143217 0
kvm 413027 1 kvm_intel
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
aesni_intel 151423 1
aes_x86_64 16719 1 aesni_intel
lrw 12757 1 aesni_intel
glue_helper 12649 1 aesni_intel
ablk_helper 12572 1 aesni_intel
cryptd 18553 3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_intel 26327 7
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
intel_gtt 17848 1 i915
snd_pcm 88487 5 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd 69340 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
Any additional information necessary?
Thanks in advance
Jakob

Hey archlinux crowd,
I am running arch on my (now 4 month old) Samsung Ultrabook NP940X3G.
It worked out-of-the-box immediately. Nice!
But probably a month ago a system update (which included intel drivers) shredded my external port. HDMI1 was missing from xrandr, instead DP1 and VIRTUAL shows up in addition to eDP1 which is the actual laptop screen.
I tried to investigate but stopped soon. Eventually, another system update a week later fixed the problem.
Now, after updating the system two days ago the same error occurred again. Reboot and HDMI1 is replaced by those mentioned fellas.
Anyone with similar problem or ideas?
$ lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.2 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
$ lsmod | grep intel
intel_rapl 17356 0
intel_powerclamp 17122 0
kvm_intel 143217 0
kvm 413027 1 kvm_intel
crc32c_intel 21809 0
ghash_clmulni_intel 12978 0
aesni_intel 151423 1
aes_x86_64 16719 1 aesni_intel
lrw 12757 1 aesni_intel
glue_helper 12649 1 aesni_intel
ablk_helper 12572 1 aesni_intel
cryptd 18553 3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_intel 26327 7
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
intel_gtt 17848 1 i915
snd_pcm 88487 5 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd 69340 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
Any additional information necessary?
Thanks in advance
Jakob

T540p BSOD after installing driver with ThinkVantage System Update

Hello,
today I got my brand new T540p. Its was delivered without OS (Lenovo Campus). I downloaded the ethernet drivers and the TV System Update on a usb flash drive with my old thinkpad. After installing Windows 8 Pro, i installed the ethernet drivers to connect to the internet. Then i started the TV System Update and let it install all critical and optional drivers.
After the all drivers have been installed the machine wants to reboot, but now i am in a reboot loop. Everytime it hangs in the screen "Windows Update 100%" and then I see the blue screen of death (Driver Power state failure) and the machine reboots again.
Does anyone else have this problem or is there a fix from lenovo?
Thanks,
Mat

After fresh install of win 8 I only updated drivers from windows update. Works fine so far. Upgraded to win 8.1 still no problem. Use nvidia, wifi, intel graphics driver from windows update. Windows could not install chipset drivers. So I downloaded the intel chipset drivers from lonovo. Install crashes with bsod and ending up in reboot loop. I assume it's a problem with the intel drivers from lenovo. At moment I install win 8 again and I will try to install the drivers from intel website.

After Win 8.1 update - Lenovo System Update defective (doesn't find updates any more)

Lenovo System Update tells me that all is up to date!
I searched at Lenovo for new drivers for windows 8.1
They asked me exactly what notebook I use. For the x1 carbone 3460-4LG (checked 3 times because I couldn't believe it) they discribed my computer as:
i7-3667U(3.2GHz), 4GB RAM, 256GB Solid State Drive, 14in 1600x900 LCD, Intel HD Graphics, Intel 802.11agn wireless, WWAN, 1Gb Ethernet, UltraNav, Secure Chip, 4c Li-Ion, Win8 Pro 64.
My notebook has 8GB RAM, 180GB SSD and (as I believe) no carbone x1 has 1GB Ethernet, because it has no network connector at all!
So first question: can I believe the suggestions of lenovo for new drivers?
There are several drivers released in October 2013 that I surely do not have already installed.
That means, Lenovo System Update doesn't work any more, without error message!
Question two: Has Lenovo a solution to repair their defective updater? Or will they release a solution?
Very disappointed regards.
Alex

Another Workaroung wich could help is the Tool DriverEasy. It does scan yours system and shows you all missing Driver. The missing driver can be downloaded or directly installed.
For me it found every missing Driver on different Lenovo Modells. The only thing to use it as Full Service, is you have to buy it for i think about 30 $.

I can't click on Schedule updates in System update!

In System update I can't click on Schedule updates because it's disabled (grey).
Why? How to Schedule updates to manually?

Please update your Firefox to latest version of Firefox 25
Download from official Google play
*https://play.google.com/store/apps/details?id=org.mozilla.firefox
and give a try

Itunes update and system update

Hi. I have a new imac and am having problems connecting to the itunes store and doing a system update.
Whenever I try it says that I am unable to connect and refers me to check my network settings. These are fine as I am able to connect to any website.
Is this a known problem with apple or is it more local with me!?
Any help would be appreciated as I would like to buy some music from itunes!
Thanks,
Duncan.

You might see if this is a problem with other iTunes users in the iTunes forum here:
http://discussions.apple.com/category.jspa?categoryID=153

Photos missing from iPhoto after operating system update

I recently updated my Macbook pro operating system to OS X version 10.10.1 and iPhoto to version 9.6 (910.29). After the updates, most of my albums in iPhoto are empty and in the photos folder, all photos pre-dating 2010 are missing. How do I recover these photos?

Obvious: restore from the back up you made prior to upgrading.
If that's not possible:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Unable to install recommended updates from System Update

Tried several times to install the below listed recommended updates for my Windows 7 Professional (64bit) OS without success. The update program progresses thru the install process and then I reboot system but the same 4 recommended updates remain. Very unusual. Very Strange. Please advise. Please advise.
(1) Patch Module for 64-bit version of Lenovo Patch Utility
(2) WiFi Driver for Intel Cards--7 (64)
(3) Patch Module for 32-bit version of Lenovo Patch Utility
(4) ThinkPad HotKey Features Integration--Vista/7/8/ (32,64)
Sincerely,
MarkGroch2

Hi cjb,
On current situation, please manually download the latest update,
perform a clean boot and then install this update. Please check if install the update successfully.
If this issue still exists, please
use the inbox Deployment Image Servicing and Management (DISM) tool. Then install the Windows update again.
àTried running
sfc /scannow and getting errors when running.
By the way, would you please let me know the error message that you can get when run sfc /scannow command?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

7.1.1 Update forces System Update?

I Installed the 7.1.1 update today and the phone turned off like normal. However, when it came on again, it gave me the connect to iTunes picture. When I plug my phone into iTunes, the only option was to factory reset my phone. Please help!

If the device is in Recovery mode, then you can restore from a backup if you have one:
Restore from Backup
Best of luck,
GB

W540 missing driver

Hi,
Update Retriever/System Update can't find USB drivers for model 20BH.
gmy104ww
Can you please publish this one? Thanks!
Solved!
Go to Solution.

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that system update is not able to find USB drivers for your Lenovo ThinkPad W540.
Have you tried updating “system update” to the latest version and checked if the driver update pops up?
If it’s still not showing up, hopefully our engineering team will take this into concern to include the driver in the update retriever. The drivers can still be installed manually by downloading from the support site.
Thanks for the patience!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Missing driver in Update Retriever / System Update

Similar Messages

Maybe you are looking for