Missing driver, other pci bridge device,compaq presario

model SR5030NX. OS=Vista Home Basic.mising driver for other pci bridge device.
When I bootup error message comes up,I tried to find driver  by having look for it to no avail.I'm not sure what the pci bridge device is,(would it be whatever is in the pci slot?)I haven't opened up the case yet.I did find out in device manager under other pci bridge device properties in the general tab ;
A.DEVICE TYPE:    OTHER DEVICES
B.Manufactuer:    UNKNOWN
C.Location::            PCI bus 2, function 0
Device status
This device is not configured correctly
There is no driver selected for the device information set or element.(reinstall driver does not help.
Under Dnder Driver tab
A.Driver Provider:    UNKNOWN
BRIVER DATE         NOT AVAILABLE
C: DRIVER VERSION  NOT AVAILABLE
DIGITAL SIGNER         NOT DIGITALLY SIGNED
UNDER DETAILS TAB,  PHYSICAL DEVICE OBJECT NAME
\DEVICE\NTPNP_PCI10014
This question was solved.
View Solution.

Just what was going on when this error message started showing up?  Usually this type of error happens after a OS reload or when new hardware is added.  If neither of these things were done, then probably a hardware failure.  There is a modem installed according to the spec page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00874655&cc=us&dlc=en&lang=en&lc=en&product=337...
If that is not being used, then try removing it.  Maybe just lucky enough that is the problem.  Most other items are integrated on the motherboard
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Similar Messages

  • Missing driver for "Base System Device"

    Hi,
    I have a N200 (0769) with WIN7 (32 bit).
    In the Device manager I have two "other devices" with missing drivers named "Base System Device".
    I could'n find any of that.
    I try looking for the Hardwar IDs:
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA&REV_0A
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA
    PCI\VEN_1180&DEV_0592&CC_088000
    PCI\VEN_1180&DEV_0592&CC_0880
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA&REV_01
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA
    PCI\VEN_1180&DEV_0843&CC_088000
    PCI\VEN_1180&DEV_0843&CC_0880
    But with no success.
    Any help where can I find that?
    Thanks in advance
    Solved!
    Go to Solution.

    hi nadne,
      Welcome to Lenovo Community Forums!
    Can you try installing this driver
    Ricoh Multi Card Reader Driver
    7kss73ww.exe
    3.25 MB
    Hope this helps,
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Missing driver on PCI Express Root Complex

    missing driver all it says is unknown driver on PCI Express Root Complex 

    Hi:
    It is probably this, but I will need the hardware ID from the device if this isn't the driver you needed.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-131788-1&cc=us&dlc=en&lc=en​...

  • Multimedia audio controller driver for windows 7 on compaq presario r3000

    I installed Windows 7 on Laptop Compaq Presario R3000. Everything is fine, however, multi media controller driver was not installed. I would appreciate if you let me know where I can get it. I have Driver CD for Windows XP that came with my computer. Thanks.
    This question was solved.
    View Solution.

    You're very welcome.
    Looks to me like you have to manually install the XP audio driver as follows...
    Download and run this file.  If it installs the audio, great.  If not...close out of any error windows.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-18403-1&cc=us&dlc=en&lc=en&...
    Go to the device manager and click on the multimedia audio controller needing drivers.
    Click on the driver tab.  Click on Update Driver.  Select the Browse my computer for driver software and browse to:
    C:\SWSetup\sp27325\SMAXWDM\W2K_XP\smwdmNV8, and select the SoundMAX Integrated Digital Audio device from the list and see if the driver installs that way.
    Then reboot.

  • I need the driver mpu-401 for a compaq presario v3417la or v3000 series with windowsxp, any help?

    I bought a MIDI-USB cable to connect a keyboard and play some music. Since the driver MPU-401 (the driver that detected it) had problems with it, i uninstalled it and I can't find it anywhere to replace it. I still can't use the keyboard, and I know that that is not the problem because I tried it out in another computer with Win 7. I have a fairly old HP Compaq Presario v3417LA with Windows XP. Please I need much help with this.

    I totally understand now, thank you SOOOO VERY MUCH!!! You have been a huge help and very friendly Would you mind if I add you to my friends list or something on here? You seem to really know your stuff and understand everything I have said, I like that and would prefer to just deal with you if I ever have any problems again lol. Also, I have given Kudos to every response you have given me and would like to give you the solution part as well, but not sure which one to select as the actual answer to the problem lol so which would you prefer me to click? Either way it's all yours, I can't thank you enough, you're amazing!! lol Hope you have a great day and fabulous week, take care!
    ~Krystal~

  • Missing driver for "Base system device" x2 after Windows 7 install on laptop

    Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
    Both devices report the following code in system information: 
    PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
    I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success.  Any help will be greatly appreciated
    This question was solved.
    View Solution.

    Here is the link.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

  • Satellite U840-113: Missing driver for PCI-Communications controller

    *Toshiba Satellite U840-113 - PSU4SE:* Win7-Prof-64Bit with original MS-DVD on new SSD completly new installed, RAID disabled, no RAID-Driver oder RAID-Software installed, internal SSD now as normal SSD in use, all drivers successfull installed - except for the following device: in the Device Manager I find under the "Another Devices" the position *"? PCI-Communications controller (single)".*
    Who can help me to locate / find the correct driver for this "PCI-Communications controller" ???
    What ist this? Do I need this?
    The System seems to run perfectly; shall I disable this Device?
    Many thanks for helpful answers!!!

    Hi
    Maybe this Toshiba article could be helpful:
    http://www.mytoshiba.com.au/support/items/faq/222
    The PCI Simple Communications Controller is part of Intel AMT Management Engine Interface and is related to networking on your computer.
    You will need to install the Intel(R) AMT Management Engine Interface driver.

  • Desperatly seeking driver xp liteon wn5301a for compaq presario sr1849it

    Hi everybody, i have reinstalled windows xp pro on my presario sr1849it and cannot find the driver for the liteon wi fi wn5301a and for
    tv tune aver media dvb-t/pal
    I have found a lot but always in suspicious sites and think they are full of malwares so i haven't downloaded them
    Hope that you can help me.
    Many thanks
    http://luigismusic.altervista.org/Computer.JPG
    http://pmcdn.priceminister.com/photo/anatel-wn5301a-carte-wi-fi-peripherique-de-communication-864650...
    This question was solved.
    View Solution.

    Hi,
    Please try for the  liteon wn5301a:
       ftp://15.192.45.21/pub/softlib/software7/COL16161/pv-42855-1/sp26807.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Would this hard drive be compatible with a Compaq Presario CQ50-115NR?

    I'm wondering if this hard drive would fit in and be compatible with my laptop:
    http://www.wdc.com/en/products/products.asp?driveid=684
    I'm not sure if this 12mm, 2.5 inch drive would fit in it or be compatible with it. I plan to purchase this one if it is indeed compatible and will fit.
    Otherwise, if not, then can someone recommend another internal 750 GB SATA 3 Gb/s 8 MB Cache 5200 or 5400 hard drive for me that is just as good quality as Western Digital? Must be compatible and fit.
    Thanks and much appreciation in advance.

    Hmm... Can no one help?

  • PCI Bridge Help-MS-6378

    Help with PCI Bridge - MS-6378
    Greetings!
    I'm having a problem in the Win98 Device Manger. In the device manager, there is a question mark next to other devices, and below it, there is an exclamation/question mark next to Other PCI Bridge Device.
    What is this Other PCI Bridge Device? Is there a driver for it or is this a hardware problem? How do I fix that?
    Config:
    AMD Duron 1.3g
    Win98 - clean, new install.
    Via 4-1 drivers installed.
    Thanks,
    Darth

    Try extracting the files from the 4-in-1's to a folder, then try updating the drivers for your PCI bridge, pointing it to the folder you extracted the files into, when asked.  It should load a driver for the South Bridge chip.  

  • MSI K7D Dual AMD PCI Bridge Help

    I noticed in the Device Mgr, there is a question mark next to other devices, and below it,  there is an exclamation/question mark next to Other PCI Bridge Device.
    What is this Other PCI Bridge Device?  Is there a driver for it or is this a hardware problem?  How do I fix that?
    I have a MSI K7D Dual AMD 2400MP, 2GB Mushkin ECC RAM, GF4 4600 Video card, and using Win2k.
    Thanks.
    T

    with dual motherboard you should have a 2nd IRQ controler is that installed? maybe its that "other"
    with a dual motherboard you should have 255 IRQ's

  • How to download audio driver for compaq presario 3908TU ?

    i accidently uninstall my laptop audio driver.
    My Laptop is Compaq Presario V3908TU although at the right corner of the screen there is a tag saying it's Presario V3000.
    Now my laptop cannot produce any sound. So i can't hear any sound using winamp, youtube , etc.
    Need help.
    Really appreciate it.
    Thanks.
    Regards,

    The audio driver is available on the HP Software and Driver Downloads page for your computer.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Drivers for onboard soundcard - Compaq Presario 6350us

    I wanted to give this old computer a fresh start, but didn't have the recovery disks.  I did have a new version of Windows XP Pro and installed that to "start over" with this computer (the computer came with Windows XP).
    Obviously the drivers for the monitor, printer, etc needed to be added after the new OS was installed.  The only problem I've had is with the sound card. 
    I can't seem to get it working.  In the device manager, the "multimedia" device shows an error - it doesn't recognize any device.  No device is available in the sound settings.
    I've downloaded the files that the Compaq support website say I need for this specific model (Realtek I believe) but it doesn't have any effect.
    I also went to the website of the sound device and tried to download their drivers - didn't work.  The download happens, the "install" happens, and it prompts me to re-start the computer, and after I do - nothing different.
    Help?!

    Hello @cakey,
    I understand that you are looking for information on the optical drive that came in the Compaq Presario 6350us Desktop PC. The optical drive is a IDE DVD-ROM optical drive - 16x-max speed (Carbon) and the part number for it is 5187-1941. This is all the information I can find on this part you can try an online search for more information using the part number if you need to.
    I hope it helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Make, model no. of cd-rw on compaq presario 6350US?

    Looking for information on cd-rw drive in a compaq presario 6350 US desktop

    Hello @cakey,
    I understand that you are looking for information on the optical drive that came in the Compaq Presario 6350us Desktop PC. The optical drive is a IDE DVD-ROM optical drive - 16x-max speed (Carbon) and the part number for it is 5187-1941. This is all the information I can find on this part you can try an online search for more information using the part number if you need to.
    I hope it helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Ethernet Controller - Driver not installed - Compaq Presario

    Hello, I am new here so be gentle
    I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
    In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
    Details in properties show the following: drivers for this device are not installed (Code 28)
    PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
    I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
    Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
    Thank you in anticipation.
    This question was solved.
    View Solution.

    Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

Maybe you are looking for

  • PI Generates Proxy - CX_INVALID_TRANSFORMATION

    HI PI Experts... This error relates to PI7.1 We have generated a new proxy to invoke a Service Interface on PI7.1. So we have an ECC6 system calling PI7.1 via proxy. Our scenario is working...but we sporadically get a short dump with an execption: CX

  • JBO-27101 error

    I'm trying to create a "delete and commit" button in a ADF select one form, using the following method: public void deleteAndCommitCodPostal() { Row empRow = getCodPostal().getCurrentRow(); if (empRow != null) { empRow.remove(); getDBTransaction().co

  • Mailbox database recovery to alternate location

    Hi, i'm trying to write a script to automatically restore an exchange mailbox database to an alternate location I am using $pg = get-protectiongroup -dpmservername servername $ds = get-datasource -protectiongroup $pg[2]; // 2's the index of the excha

  • Bapi for asset deletion (Tcode AS06)

    Hi Guys, Do we have any BAPIs for asset deletion (Tcode: AS06) ? Pls. let me know . Thanks and Regards, Sumit

  • How to use "CREATE DIRECTORY" from client side remotely

    Is there any way to create a logical directory from the remote client side, other than in the server? Or it's associated with the server's operating system policy? Thanks.