Missing driver softwares

Hello Team,
My laptop is HP Compaq 15-s008TU
These below 3 drivers are missing in my laptop
PCI Device
Hardware ID: PCI\VEN_10EC&DEV_5229&SUBSYS_2211103C&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_2211103C
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
RaLink _RT3290_Bluetooth_01
Hardware ID: USB\VID_148F&PID_3298&REV_0000
USB\VID_148F&PID_3298
SM Bus Controller
Hardware ID: PCI\VEN_8086&DEV_9C22&SUBSYS_2211103C&REV_04
PCI\VEN_8086&DEV_9C22&SUBSYS_2211103C
PCI\VEN_8086&DEV_9C22&CC_0C0500
PCI\VEN_8086&DEV_9C22&CC_0C05
Please help me to download these drivers

Hi,
Please try 3 first, reboot
3. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-138108-1&cc=us&dlc=en&lc=en...
then
2. http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_130262_1
1. http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52798.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Trying to update iphone 4 and am missing driver software, help?

I cannot figure out how to update or reinstall the driver software for my phone. it asks for the disk and i do not have the disk nor can the program find it online. can anyone help?

Uninstatll iTunes. Restart your computer. Reinstall iTunes.

How do i install a missing driver?

i have a missing driver im not sure which one and i dont know how to find out.
how do i install this driver (where do i get it from)?
its a 4th gen ipod touch on ios 6.1.4 i think, i tried to restore it to a previous setting as it was freezing and kept crashing all the apps.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates

Missing driver and "System Interrupts"

Hello!
I found 2 problems on my brand new HP Pavilion 11-n070eg x360 :
- In Device Manager, i have a missing driver und "Other Devices" (See screenshot). Tried to update / install, but dont know what it is. Also tried "Slim Drivers" to check for missing drivers, didnt find anything. Also HP Support Assistent doenst find missing software / drivers.
- In Taskmanager there is a process called "System Interrupts" (See screenshot). It takes CPU power from 15%-30%.
It disappeared after a restart, but know its back after a while! I read online it has something to do with missing / corrupt drivers, so i hope there is a connection between my to problems.
Name: HP Pavilion 11-n070eg x360 ( Intel )
Product ID: 00258-60101-73698-AAOEM
Windows 8.1 x64 (everything up-to-date)
bought 2 weeks ago, not much installed. Standard Antivirus (Windows Defender), no Tuneup Software installed.
Thank you very much, i hope someone can help.

Then you will need to post the hardware ID for the unknown device, because I played my one guess card and lost.
Go to the device manager and click on the unknown device.
At the top of the Unknown Device window, click on the Details tab.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (hardware ID's).
Post the top string of characters you see in the window.

Missing driver for my HP 15 r-249 TU laptop

hiPlease provide me drivers for my new laptop HP 15 r-249 TU which were missing.I need the following drivers PCI\VEN_8086&DEV_9C22&SUBSYS_2211103C&REV_04 PCI\VEN_10EC&DEV_5229&SUBSYS_2211103C&REV_01 ACPI\VEN_HPQ&DEV_6001 kindly help me.

mk79 wrote:
Dear expert,
thank you for your prompt answer. Please find below details you had mentioned in your reply.
OS - Windows 7 64 bit
Bluetooth controller - PCI\VEN_1814&DEV_3298&CC_0D11 Ralink Bluetooth 4.0
Ethernet controller - PCI\VEN_10EC&DEV_8136&CC_0200 Realtek RTL8102E Family PCI-E Fast Ethernet NIC
Network controller - PCI\VEN_1814&DEV_3290&CC_0280 Ralink Wifi 802.11n
PCI Device - PCI\VEN_10EC&DEV_5229&CC_FF00 Realtek media card reader
PCI Simple Comm Cntroller - PCI\VEN_8086&DEV_9C3A&CC_0780 Intel IMEI driver software
SM Bus Controller - PCI\VEN_8086&DEV_9C22&CC_0C05 Intel chipset driver
USB COntroller - PCI\VEN_8086&DEV_9C31&CC_0C03 Intel USB 3.0 eXtensible host controller
Once again, thanks a lot for responding to my question.
Thanks,
Let me know how these drivers work out.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where do i find driver software?

I got a new laptop and I downloaded the new version of iTunes. When i try to plug in my ipod (30 GB video 5th gen.) it says it can't find the driver software. How do i get this?

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Cheers,
Patrick

Read this for CD/DVD Drive with burning, missing drives, not seeing discs

Seeing lots of the same posts with the same solutions being applied (mostly upper/lower control filters/MS Fixit)... so I thought I'd put this up for everyone.
*Update* If this helps, please click the kudos to the right as I'm trying to gauge how effective this is. If you have the time to help the community, please reply stating what did or did not work.
There are some helpful HP support articles that you may want to try before posting:
If your drive cannot burn discs... or you can burn CDs but not DVDs (or vise/versa)... read this...
Drive Cannot Write to Writable Discs (Windows 7)
Drive Cannot Write to Writable Discs (Windows Vista)
Drive Cannot Write to Writable Discs (Windows 98, ME, XP)
Summary:
1) Try different discs! Cheap discs can be hit or miss. Find a disc brand and type that works best.
2) Try burning at a slower speed (not the best option, but can often get the job done if the laser is fading).
3) Remove drive from Device Manager and remove upper/lower filters (see below).
4) Use MS System Restore to go back to a time when it was working.
5) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
6) If the drive is not bad - save your files and use HP Recovery to put the system back to the beginning.
If your drive cannot read discs; CDs or DVDs or both...
Drive Cannot Read Discs in Windows 7
Drive Cannot Read Discs in Windows Vista
Drive Cannot Read Discs in Windows 98, ME, and XP
Summary:
{restart the PC at least once to see if the drive shows up on boot}
1) See if the drive is listed in Device Manager (look for problems if it is).
2) Check autoplay (skip if you don't use).
3) Make sure a bad disc isn't knocking out the drive (an operating system mounts discs as drives and things can get screwed up).
4) Try reading the disc from a command prompt environment (outside of Windows).
5) Reinstall drive from Device Manager (if drive is listed). {I'd replace this with bigger process of remove upper/lower filters (see below)}.
6) Use MS System Restore to go back to a time when it was working.
7) Use PC-Doctor/HP Hardware Diagnostic software to check for a bad drive.
CD/DVD drive is missing (not in Windows Explorer or My Computer or in burning software)...
CD/DVD Drive is not Detected (Windows 7)
CD/DVD Drive is not Detected (Windows Vista)
CD or DVD Drive is not Detected (Windows 98, ME, or XP)
Summary:
1) See if the drive is listed in Device Manager (troubleshoot based on what you see).
2) Reset Power: Unplug power cord, press Power button for 10 seconds.
3) Check power and data cables attached to the drive and look in the BIOS for the drive name.
4) Remove upper/lower filters (see below).
5) Reinstall burning software
6) Get and CD/DVD drive firmware updates if available (to prevent missing drives in the future (I assume)).
7) Use MS System Restore to go back to a time when it was working.
Stuck Drawer...
Opening a Stuck CD or DVD Drive Tray
Summary:
1) Press eject button on case, on drive, button on keyboard (if exists).
2) Right-click drive icon in Windows and select Eject.
3) Turn off PC and inert a straightened paper clip into the manual release hole on the drive.
4) Check the power cord on the back of the drive.
MS FIXit, Resetting Upper and lower Filters (XP, Vista and 7)
First... try to use the MS Fixit (for Vista) if you are on the computer having the problem)...
Microsoft Fix it Solution
Otherwise, here are the manual steps (overview):
1) Uninstall the CD/DVD drive in Device Manager and DO NOT RESTART the computer.
2) Uninstall your CD burning software (make sure you have the installation disc or you can resinstall from Start, Programs, PC Help and Tools, Recovery Manager (or Driver/Application Recovery). If you don't have the installation discs, skip this step - it might still work).
3) Open the registry editor (Start -> Run -> enter Regedit) ... might want to make a backup of the registry at this point.
4) Open the following keys:
+ HKEY_LOCAL_MACHINE
+ SYSTEM
+ CurrentControlSet (or the current control set with lowest number if that is all that is listed)
+ Control
+ Class
5) Select 4D36E965-E325-11CE-BFC1-08002BE10318. It has to be this exact key - make sure you can see the last numbers!!!
6) Delete the UpperFilter and or the LowerFilters value in the right window if either exists.
7) RESTART the computer - this step is important. Wait for Windows to find and install the CD/DVD drive you removed earlier.
8) Reinstall your burning software and restart the computer again.
Message Edited by GarenT on 10-07-2009 06:32 PM
Message Edited by RasterBlaster on 11-30-2009 03:51 PM
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

That's why you want to make a backup of the registry. If you didn't make a backup, use MS system restore to go back. The only values you should remove are UpperFilter or LowerFilter - one or both may be in there and can be removed. If neither value exists, then that is probably why you can't burn and Windows is not recognizing your drive as a writable drive.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

MSI GE70 0NC - Missing driver HELP!

Hi people,
So I have owned my notebook since september, and just recently (December time i think) I started to get the BSOD when checking the stop codes i found that the code was linked to the video card failing. I checked my drivers to see if any needed updating or where missing since i installed windows 7 and got rid of 8 as I use this notebook as a cad and rendering station for work. I noticed i have two missing drivers that windows cant automatically install. one is a PCI Device for PCI bus 2, device 0, function 0. ( PCI bus 0 and 1 are my Intel 4000 and GTX 660m display adapters). and the driver status says "The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver." the next missing driver is labelled as unknown device and upon reading its properties gives me this location info on Microsoft ACPI-Compliant Embedded Controller with the same status as before. I have been on the MSI downloads for my notebook and have downloaded all drivers/ BIOS/ Firmware that i can, with no success.
Can anyone help me find these missing drivers to see if ths stops the BSOD because i really cba sending it to MSI for them to say it's a software issue and my fault for changing to windows 7.
Thanks
Callum

chipset drivers: http://download.msi.com/nb_drivers/cs/cs_intel7series_9.3.0.1020_al00.zip
Intel HD card: http://download.msi.com/nb_drivers/vga/vga_intel_gt650m_gtx660m_9.17.10.2884_0x76849241_8764.zip
Nvidia drivers: http://download.msi.com/nb_drivers//vga/beta_nv_8.17.13.275_w764.zip
[or latest one from Nvidia.com]
all drivers at: http://www.msi.com/product/nb/GE70_0NC.html#/?div=Driver&os=Win7 64
you may have some device with no drivers for it, this is because Win8 BIOS/EC has addiction airplane modes,
which can't be used under Windows7, but that's not a reasons for any BSODs

Elitepad 1000 G2 Missing driver

Hi, I'm trying to locate a missing driver for an Elitepad 1000 G2 (Windows 8.1 x64). Internet searches show other hp devices with this id as the quick launch button software but I can't find anything like that for this device. Also it does have a Productivity Jacket installed but I am unable to get a driver page to load for it so that may be what it's missing?
Hardware ID:
ACPI\VEN_HPQC&DEV_0006
Thanks.

I believe the correct driver is SP46167. Installed it, then had to go to device manager and manually update driver and point it to the .inf file in c:\program files (x86)\hewlett-packard\hp quick launch buttons\btndriver64

Missing driver "USB\VID_0BDA&PID_5775&REV_0008&MI_00 USB\VID_0BDA&PID_5775&MI_00"

hi.. can someone helpme to find the driver ? and its the driver Ids
USB\VID_0BDA&PID_5775&REV_0008&MI_00
USB\VID_0BDA&PID_5775&MI_00
its say missing driver the HP Truevision HD.. thanks.

Paul_Tikkanen wrote:
Hi:
I believe that is the webcam that needs a driver.
Please see if this one works...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_141708_1&swEnvOid=415...
Otherwise, see if installing the cyberlink youcam software works.
File name: sp69718.exe
still not works.. there is another solution ?

SP14 Feature - Portal Drive Software Link

Hi,
<b>Sp14 Feature - Portal Drive</b>-
Where can i get the download of Portal drive software or link to the software.
As per documentation
http://help.sap.com/saphelp_nw04/helpdata/en/42/cafe4a59956bace10000000a1553f6/content.htm
Thanks,
Praveen

OK here is what I followed:
/sp-stacks/netweaver04/
Selected drop down SP14 and selected all usage types -> next step...
All the usage types come up, KM is not in the list but TREX is...
next step...
All file/descfriptions show up including "KMC NW04 14"
No obvios descrfiption that indicated "Portal Drive" softawre
Next step...add to download basket...
View download basket... No obvios Poeral drive softawre download...
I gota be missing something here ....
Stephen

Windows vista, Ipod shuffle 4th gen. Computer cannot find device driver software for ipod.

After several hours trying the troubleshooting options provided by the apple support site, I have come to what I think is the issue here. My girlfriend recently got an ipod shuffle and when plugging it into her computer the dialog pops up saying it is installing device driver software for the ipod. Eventually it asks me to insert the CD that came with the ipod. No CD came with the ipod, so I click the option that says "I do not have my cd". Then it gives me the option of searching automatically or manually for the driver software. The automatic way can't find it. Doing it manually, with the help of the troubleshooting page, didn't work either. google search can't seem to help me on this one. Also, I tried plugging the ipod into my computer (not hers) and it worked fine, it was able to install the device driver software on its own. Does anybody know the issue here? My computer has windows 7, and hers has vista. Hers is Serice Pack 1. When I tried installing service pack 2 it wouldnt work. I don't know if that is the issue though. I have tried just about everything, I think the issue is finding the device driver software. When I do a google search nothing comes up, so I have no idea what to do at this point. Any help would be appreciated, thanks.

Well its surprising to know that! But even have an ipod shuffle 3rd gen n dint face any problem like that. FYI no cd comes with the ipod jus take ur ipod to an apple exoert n he will solve ur problem .

Cannot find the driver software for my printer hp 1515

First i found it..but then i realized that it for hp 1510 printer,so i had stopped the download. but then, itry again to download but it not show the dowload for software, it only show the utility download. what should i do? i need the driver software because i'm using netbook that there's no place for cd driver to install.i want to use my printer but can't because not install yet.where can i find the driver software download?

Hello,
If your PC works on Windows 7 / 8 or 8.1, then please download and run the HP Print and Scan Doctor from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

New laptop can't find the driver software for my ipod. What should I do?

Previously I've used a family member's computer to sync their songs onto my iPod. We have very different tastes in music so I was excited to finally get my own songs on here. I now own my own laptop and have installed the most recent iTunes. However, whenever I plug the Ipod in it says "Windows needs to install driver software for your Unknown Device" I click locate and install driver software but it doesn't work and remains an Unknown Device and I can't sync songs. Should I have a CD or something for this? I have a 2nd gen. iPod nano so if I ever did get one it's long gone now...

sheamb wrote:
I have downloaded 10.6 but it says that it is not the next update. Any suggestions?
where did you download 10.6 from? It is only available on a DVD.

How to do a single channel DAQ using NI-DAQ driver software with a PCI-MIO-16XE-10 card

Hi,
I would like to find out how I could do a simple one channel Data Acquisition from a signal generator using the NI-DAQ driver software with a PCI-MIO-16XE-10 card.
I have written some test problem but even when the signal generator is turned on/off I get back some weird values.
Here is my code.
CString sFunctionName("");
double volt[OUTPUT_POINTS*2];
double out[OUTPUT_POINTS*2];
short timebase, ready, code, stopped;
unsigned short sampleInterval;
int i, status, count=0;
unsigned long update, points;
short* ai_buffer;
short output_ch_vector[16];
int local_ITERATIONS = 2;
SAFEARRAYBOUND bound[1];
double dataItem = 9.9;
long j;
long k;
double* pTheValues;
LPTSTR lpsz_ErrMsg;
// Initialise device
status = Init_DA_Brds (deviceNumber, deviceNumberCode)
Initializes the hardware and software states of a National Instruments
DAQ device to its default state and returns a numeric device code that
corresponds to the type of device initialized
Init_DA_Brds(DEVICE, &code);
// Check return code from Init_DA_Brds
Code return should be 204: PCI-MIO-16XE-10.
if (code < 0)
CString sError;
sError.Format("Code error: %d", code);
if (code == -1)
sError = sError + ": No device found";
LPTSTR lpsz = new TCHAR[sError.GetLength()+1];
_tcscpy(lpsz, sError);
AfxMessageBox(lpsz);
delete lpsz;
return S_FALSE;
// Allocate memory for analog output and input arrays
//ao_buffer = new short[OUTPUT_POINTS*2];
ai_buffer = new short[OUTPUT_POINTS];
// Set double-buffering
status = DAQ_DB_Config (deviceNumber, DBmode)
Enables or disables double-buffered DAQ operations.
status = DAQ_DB_Config(DEVICE, 1);
if (status < 0 )
sFunctionName = "DAQ_DB_Config";
goto TidyUp;
// Get the rate parameters
status = DAQ_Rate (rate, units, timebase, sampleInterval)
Converts a DAQ rate into the timebase and sample-interval
values needed to produce the rate you want.
status = DAQ_Rate(RATE, 0, &timebase, &sampleInterval);
if (status < 0 )
sFunctionName = "DAQ_Rate";
goto TidyUp;
// Setup scan
status = SCAN_Setup (deviceNumber, numChans, chanVector, gainVector)
Initializes circuitry for a scanned data acquisition operation.
Initialization includes storing a table of the channel sequence
and gain setting for each channel to be digitized
status = SCAN_Setup(DEVICE, 1, ai_channels, gain);
if (status < 0 )
sFunctionName = "SCAN_Setup";
goto TidyUp;
status = SCAN_Start (deviceNumber, buffer, count, sampTimebase,
sampInterval, scanTimebase, scanInterval)
Initiates a multiple-channel scanned data acquisition operation,
with or without interval scanning, and stores its input in an array
status = SCAN_Start(DEVICE, ai_buffer, OUTPUT_POINTS, timebase, sampleInterval, timebase, 1000);
if (status < 0 )
sFunctionName = "SCAN_Start";
goto TidyUp;
while(count < local_ITERATIONS)
// Check whether we are ready to input another half-buffer
status = DAQ_DB_HalfReady(DEVICE, &ready, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_HalfReady";
goto TidyUp;
if (ready == 1)
status = DAQ_DB_Transfer(DEVICE, ai_buffer, &points, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_Transfer";
goto TidyUp;
count++;
// Clear the analog input
status = DAQ_Clear (deviceNumber)
Cancels the current DAQ operation
(both single-channel and multiple-channel scanned) and reinitializes the DAQ circuitry.
status = DAQ_Clear(DEVICE);
if (status < 0 )
sFunctionName = "DAQ_Clear";
goto TidyUp;
status = SCAN_Demux (buffer, count, numChans, numMuxBrds)
Rearranges, or demultiplexes, data acquired by a SCAN operation
into row-major order, that is, each row of the array holding the
data corresponds to a scanned channel
status = SCAN_Demux(ai_buffer, OUTPUT_POINTS * 2, 2, 0);
if (status < 0 )
sFunctionName = "SCAN_Demux";
goto TidyUp;
//Convert binary values to voltages (Doesn't actually take a reading from board)
status = DAQ_VScale (deviceNumber, chan, gain, gainAdjust, offset, count, binArray, voltArray)
Converts the values of an array of acquired binary data and the gain setting for that data
to actual input voltages measured.
status = DAQ_VScale (1, 0, 1, 1.0, 0.0, OUTPUT_POINTS , ai_buffer, volt);
if (status < 0 )
sFunctionName = "DAQ_VScale";
goto TidyUp;

Hello,
Please take a look at lots of examples available at :
1. www.ni.com >> NI Developer Zone >> Development Library >> Measurement Hardware
2. C:\program files\national instruments\ni-daq\examples\visualc
Sincerely,
Sastry V.
Applications Engineer
National Instruments

Missing driver softwares

Similar Messages

Maybe you are looking for