Missing drivers after installing Win7

Hallo
On my just new macbookpro, i installed an original Win7 home premium 32bit.
All seemed to go right, Windows is working ok, but most drivers are missing!
How to pick them up from internet if you cant't be connected to??
Where can i find them (the right ones)
thanks

Below is reproduced a procedure the BC Install Manual suggests.The Windows install DVD can do the same sort of thing if it is the Windows drivers that are missing.
You can find the entire PDF document here:
http://manuals.info.apple.com/enUS/Boot_Camp_Install-Setup10.6.pdf
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorer and double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions. If a message appears that says the software you’re installing has not passed Windows
Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example, if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.
To reinstall a specific driver:
1 Insert your Mac OS X installation disc. 2 Quit AutoRun if it opens. 3 Using Windows Explorer, locate the driver that you want to reinstall. 4 Open the driver to start the installation.

Similar Messages

Two missing drivers after instal

Hi
I recently had to complete a fresh OS instal following the PCI card which ceased to want to be recognised by Windows.
That cured the problem but am left now with two devices not being recognies by the syste. One is SM Bus Controller and the other just states Unknown device.
I also note that it is only seeing one of the hard drives now and none of the ThinkPad short cut buttons work.
However, the lap top is funcioning normally.
Does anyone have any idea what could cause this, have I missed a step somewhere.
Thanks in advance,
Liam
Solved!
Go to Solution.

It sounds like it may be your Intel Remote Systems Management, if I'm correct then try rebooting into your BIOS menu and find the Intel SM manager menu and disable it at the low BIOS level.
At next boot, the devices should be hidden from the OS and the new hardware detected issue / devmgmt.msc unknown devices should be gone.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

HT3986 After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system

After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system.
I donot think I have a install disk when I bought my mac, there is only a disc partition for recovery system.

Welcome to the Apple Support Communities
You have to install Boot Camp drivers. On Mountain Lion, you have to download them.
First, press X key while your Mac is starting to start into OS X. Then, open Boot Camp Assistant and select the option to download the drivers. You will have to burn them into a DVD or USB drive, so after downloading them, restart and install them into Windows

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE)

Fn+b keys don't work after installing Win7 Ultimate (HP Envy 14 BE) --not able to use the Beats Speakers. Any software updates I need to install?
This question was solved.
View Solution.

Hi Jim,
You're welcome
Is the version of Windows 7 Ultimate you have installed 32bit or 64bit?
Open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers - do you see an existing entry for the IDT High Definition Audio CODEC listed here?
There is an alternative IDT Audio driver you may wish to try on the following link.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
Let me know if you get the same error with this version.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Mic problem after installing win7 through bootcamp

i am having a problem of mic in my macbook after installing win7 through bootcamp if any one have solution please mail me

yes, no luck there either.
Now I cannot boot at all.
I never had a problem wih the Mac OSX side only that crappy microsoft software. Unfortunately
there are a lot of woftware that I need for my work that only exist under micorsoft.

HT1338 Can't access my mac os side after installing win7

I just installed windows 7 on my new mac using boot camp. I followed all the steps but after installing win7 there is no way I can access my mac os partition. I tried to reboot with the Alt/option key pressed but I am presented with a window asking me to provide a password. When I enter my password, it won't let me in. It just delete the password. I have re-tried several times but it won't work. My question are:
1. Is there any way I can install windows support software (for the driver) from bootcamp since I cannot access my mac side.
2. I tried to download and install bootcamp but it doesn't work since it says I do not need to install any bootcamp update.
3. Is there any ways I can go past the mac password screen? I really don't understand why it doesn't accept my password. I am the only administrator and user of my computer

#3. Try things in this Reset Password faq.
DALE

After installing Win7, I created an 3a. partition and now I can't boot with Win7

After installing Win7 with success, I created an other data partition and now I can't boot with Win7 anymore. What can I do?
Thanks!
Vernon

Thanks, hatter! But I´m new in the Mac World and that´s greek for me. I have no idea about what is BCDedit, GPT, EFI, etc... I went to your bookmarks and found many discursions there. I selected 5 that the subject looks useful for me (https://discussions.apple.com/thread/3543804, https://discussions.apple.com/thread/3477901,
https://discussions.apple.com/thread/3360787, https://discussions.apple.com/thread/3354587 and https://discussions.apple.com/thread/3199099) but, as a tipical windows user, a really new mac user and a non-american (I don´t speak English well), it´s impossible to me to understand all this.
Do you know any "how to" in this forum or i any other part of the Internet where explain step-by-step what a dummy needs to do to recover the acess to the Windows partition (my primary objective) and create an third partition (FAT32) for data acessible for both OS?
Thank you very much!

I need drivers to install Win7 64bit on SSD mSATA

Hi!
I need drivers to install WIN7 64x on SSD mSATA THNSNH256GMCT
Serial number on my product is 23NS10BFTABY
Thank you!

This serial number doesn't help much. It will be better if you can post exact notebook model name and model number.
Anyway, visit Toshiba support and download page for your country and if your notebook model is supported for Win7 64bit you should be able to find all necessary drivers, tools and utilities.

Various missing drivers after re-installing Win7 64 bit on hp pavilion dv7-6111eo

Aloha
First off... I'm no techy, geek or nerd... And I mean those words in the best way, to those who are.
In this case You need to see me like a kid in kindergarden, being taken by the hand, and being shown what to do, down the the last detail. Sad but true.
Without me knowing why, I experienced missing several DLL-files, and often got error messages about those.
A pain in the neck, so I re-installed Windows 7 64 bit, as I didn't want to mess with those DLLs missing.
After that re-installing, I couldn't get internet-connection to my router. Luckily I have a 10+ year old stationary, where I after some time found the driver I needed, so that works now.
But now it seems there's several other drivers missing/not been installed.
I got a little info, from another post, what to provide with info, and hope that will be enough. if not, then please let me know the additional info that may be needed, and where I can find those on my PC, so I can provide these.
Missing drivers:
Network Controller;
Hardware ID: PCI\VEN_8086&DEV_008B&SUBSYS_53158086&REV_34
SM Bus Controller;
Hardware ID: PCI\VEN_8086&DEV_1C22&SUBSYS_1659103C&REV_05
Universal Serial Bus (USB) Controller;
Hardware ID: PCI\VEN_1033&DEV_0194&SUBSYS_1659103C&REV_04
I have 4 USB-ports, but only one will work, the others don't respond, and I need all four running at the same time. Plus I'd like to have everything in order after I had to re-install Win 7.
I thank You in advance for any and every help I can get. Just have in mind, that I need the things carved into paper.
This question was solved.
View Solution.

Hi:
You need these drivers...
SM Bus Controller; Install this first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-2&cc=us&dlc=en&lc=en...
Network Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99014-2&cc=us&dlc=en&lc=en&...
Universal Serial Bus (USB) Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100294-2&cc=us&dlc=en&lc=en...
You will also need this bluetooth driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99500-2&cc=us&dlc=en&lc=en&...

TS3173 mac 27 inch ,i5 . after installing Win7 , missing drivers .

i have mac 27inch , i5. i install win7. installation was successful, but i found out that all the neccesary drivers were not yet install. like display ,ethernet , wireless connection ,etc .. help..!

Did you read ANY of the guides? You will want to read the Installation Guide at the top.

Satellite A300 (PSAG8E) - Hardware problems after installing win7 ultimate

Hello and good day,
I've installed win7 ultimate a few days ago and windows managed to recognize most of my hardware accept my build in mic and camera and another component I am not sure about what it is (Windows update automatically downloaded the sound and graphics driver for me).
My questions are - where can find the remaining drivers and where can I get the preinstalled Toshiba tools and software? (The driver site in the Toshiba support page does not include those drivers and software)
Thank you very much
Roi Ben Simon

Hi
I have Satellite A300 (PSAG8E) too and installed Win7 Home premium and everything works perfect.
At first I must say that I don't know where you have searched drivers and Toshiba tools and utilities because all stuff is downloadable on Toshiba support & download page under http://eu.computers.toshiba-europe.com
It is logic that mic will not work if you didn't installed proper driver. Install drivers alone and not using Microsoft update. What you need are real and tested drivers and not some free drivers from internet.
Go to Toshiba download page and install all stuff following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Everything works well but missing some drivers
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - work properly.
-Synaptics driver

HDX18t unrecognized devices after installing Win7

After a clean install of Windows 7 Ultimate, Device Manager reports three Base System Devices without drivers and two Unknown Devices (ACPI\ENE0100 *ENE0100) and (USB\VID_138A&PID_0001&REV_0372 USB\VID_138A&PID_0001).
As far as I can tell, all the USB ports work correctly, as does everything else I have tested (some ports I don't use). I presume ACPI has something to do with power management, but I can't find any other indications of power problems -- although I had to replace the battery not long before installing Win7 because it wasn't charging.
What are these five devices, and how can I find drivers -- especially for the three that don't seem to identify themselves?
I tried to use the "automatically find your products and solutions" tool, but it won't load into the latest version of SeaMonkey, and with IE9 it appears to start but shows zero progress after more than an hour.
Any suggestions?
This question was solved.
View Solution.

Hi:
The base system device is this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76497-1&cc=us&dlc=en&lc=en&...=
The first unknown device you posted that needs drivers is this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-66577-1&cc=us&dlc=en&lc=en&...=
The second unknown device you listed is this one.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67648-1&cc=us&dlc=en&lc=en&...=
Paul

How to get windows 7 drivers after installing

please suggest me how to install win7 and then how to install driver for that

Items you will need:
1. Genuine Windows 7 disk, Home Premium, Professional, or Ultimate, 32-Bit or 64-Bit. Click HERE for a list of computers that are compatible with 64-Bit versions of Windows 7.
2. A USB disk or burnable CD, for installing the drivers.
You will be creating what is called a BootCamp partition on your HD. This utility called BootCamp Assistant (which you can access in your Applications>Utilities folder) will assist you in downloading the Windows 7 drivers, burning them to a CD, or USB drive. It will then partition your drive for you (you can select the size you want for Windows ex: 60GB, 120GB ect...), and install Windows with little input needed from you. It really is a easy, and convenient tool. Hope I could clear things up for you!
Best,
Coander15

Still restarts after instalation WIN7

Hi everyone,
I have problem, I have bought Lenovo IdeaPad G570 without OS. I tried to instal WIN7, everything going fine, but at the end of instalation, notebook wrote "logon process initialization failure" and still restarts. In instalacion I deleted partitions, and format the new one so i havent my backup file. I tried to recover it, but still the same. Could you help me pls.

System get restarted after installation of windows. I would suggest you to kindly check the SATA mode controller in the BIOS mode, change it to IDE or compatible mode. To do so please restart the system and press F2 key continuously, Bios screen will appear.
Also you can check with other operating system.
Thanks & Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Endless 'searching for drivers' after installing 10.5

Cannot print after installing 10.5.1 on my g4 MacBook. It 'sees' the printer, but it cant bring up the driver. I have tried a Canon PM500 and an HP 2400, connected to USB port and to my Airport base station, I have done the special installation from the disk for both Canon and HP, I have 'reset printing system', I have downloaded drivers from Canon website. I reinstalled (regular) 10.5 on the G4 MacBook.They all say installation successful, and the printer is recognized in the printer chooser, but then the spiral turns endless looking for driver. The printing to the same printer from my MacBookPro (intel) and a G4 macbook with 10.4 works fine.
Any suggestions?

Another postee with the same problem found that when the spinning ball appeared, the cause was an Epson utility running in the background. He knew this wasn't right because he didn't have an Epson printer. He found that by deleting the entire contents of the Printers folder (./Library/Printers) and reinstalling the Canon driver he downloaded from the web, he was able to add the printer without the delay.

Missing drivers after installing Win7

Similar Messages

Maybe you are looking for