Missing drivers after upgrade Hard drive of X31(2672)

Hi,
After upgrade my X31 hard drive(the old one is dying), my USB is not working anymore. Through PC doctor, I found both the drivers of Network Controller(code 28) and  Universal Serial Bus controllers at USB/RootHUB (code 39)are missing. I don't have recovery CD. Do you know how to fix it?! 
Thanks,
Yang

Install ThinkVantage System Update and let it pull down the drivers and apps for you machine and OS.  Install the Win 7 version.
ThinkVantage System Update
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • After upgrading hard drive on MacBook Pro, Premiere will no longer open

    I just upgraded the internal hard drive on my MacBook Pro (mid-2010, unibody), OS 10.8.2, with an NVIDIA GeForce GT 330M 512 M Graphics card.
    I've been running Premiere Pro CS5, and then CS6, on the machine without any problems until I upgraded the hard drive (to a new Seagate Momentus XT SSHD 750GB).
    Now, when I load Premiere Pro, I get the following error message: "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
    I've tried everything I can think of, including resetting preferences, and what they suggest here: http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html (I installed the latest CUDA driver, and my GPU driver is up to date; I am already set up as Admin on my computer).
    Another thing I did was go into Terminal and ran GPUSniffer. That was what worried me - it seemed to suggest that the card is not functioning, but I don't know if that means it's not functioning at all or not functioning in ways that Premiere can work with. Any advice? I'm tempted to open it back up and re-install the original hard drive, except that new one is making most other things noticably faster. Booting, opening and closing apps, etc.
    Here's the message I got when I ran GPUSniffer:
    --- OpenGL Info ---
    2012-12-15 16:03:27.492 GPUSniffer[1310:707] invalid drawable
    Vendor: NVIDIA Corporation
    Renderer: NVIDIA GeForce GT 330M OpenGL Engine
    OpenGL Version: 2.1 NVIDIA-8.0.61
    GLSL Version: 1.20
    Monitors: 1
    Monitor 0 properties -
       Size: (0, 0, 1440, 900)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 1
       Shaders 422: 1
       Shaders 420: 1
    --- GPU Computation Info ---
    Found 2 devices supporting GPU computation.
    CUDA Device 0 -
    Caught structured exception!Full test failed, trying 444 shaders only
    --- OpenGL Info ---
    2012-12-15 16:03:27.522 GPUSniffer[1310:707] invalid drawable
    Vendor: NVIDIA Corporation
    Renderer: NVIDIA GeForce GT 330M OpenGL Engine
    OpenGL Version: 2.1 NVIDIA-8.0.61
    GLSL Version: 1.20
    Monitors: 1
    Monitor 0 properties -
       Size: (0, 0, 1440, 900)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 1
       Shaders 422: 0
       Shaders 420: 0
    --- GPU Computation Info ---
    Found 2 devices supporting GPU computation.
    CUDA Device 0 -
    Caught structured exception!Minimal test failed, trying CPU only
    --- OpenGL Info ---
    2012-12-15 16:03:27.547 GPUSniffer[1310:707] invalid drawable
    Vendor: NVIDIA Corporation
    Renderer: NVIDIA GeForce GT 330M OpenGL Engine
    OpenGL Version: 2.1 NVIDIA-8.0.61
    GLSL Version: 1.20
    Monitors: 1
    Monitor 0 properties -
       Size: (0, 0, 1440, 900)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 0
       Shaders 422: 0
       Shaders 420: 0
    --- GPU Computation Info ---
    Found 2 devices supporting GPU computation.
    CUDA Device 0 -
    Caught structured exception!CPU only test failed

    It looks like I've solved my problem.
    I decided to try again - this time cloning my original drive onto the new one instead of using Time Machine - and now everything seems to work just fine. Just faster. I can only assume that in the restoration process the first time, some necessary files got corrupted or went missing. Thanks, Bill, it was your question that made me wonder whether it might be better to create an image.

  • Missing drivers after upgrade to Win 7 in HP pavilion dv9500

     I upgraded my laptop to Windows 7 32 bit and everything works except from 2 base system devices listed in device manager that need work. What should I do?

    I have the same problem with you but I found out once you upgrade your pc to windows 7 there's always an issue. You'll try calling HP Tech, and they will refer you to PC techinician nearest to you because they said there's something wrong with you HD blah blah or your sound card is gone...need a new one. Well I nearly believe them until I stumbled what's causing my problem and I fixed it myself. Now I have no problem with my sounds missing or audio device missing. My Laptop has voice now non-stop.
    The problem that cause wasn't about the hard drive or the sound card but it is about the CONFIGURATION OF YOUR PARENTAL ACCOUNT CONTROL IN WHERE YOUR AUDIO SOUNDS HAS TO BE USE. AFTER I SET MINE TO WHAT IS SUPPOSED TO BE THE RIGHT OPTION, SINCE THEN I HAVE NO MORE PROBLEMS ABOUT MY SOUNDS OR AUDIO DEVICE MISSING OR NO AUDIO DEVICE INSTALLED.
    SOLUTION; Click Start/Control Panel/User Accounts and Family Satefy. Click Parental Control. In the box at the LEFT SIDE you will see GAMING RATING SYSTEMS. Click Gaming Rating System and click administrator box Yes(if come out). In the box you will see some LOGO ICONS for you to choose in which gaming rating you want to use your sounds. This is where you must configure your computer what rating is compatible to use to run sounds in your Windows 7 from Windows Vista or Xp.
    The previous option in my Laptop was in the 3rd option ESRB. Then I move it to the 2nd option that the LOGO is written in Chinese Language( Computer Software Rating Regulation). I click OK and then Restart. Since then I have no missing audio or missing sounds problems. 
    I hope that helps.

  • Z61t Doesn't boot after upgrading hard drive

    I'm upgrading the hard drive on my girlfriend's Lenovo Z61t laptop and am running in to a strange problem.
    The computer will not boot anymore! I cloned the old disk to the new one using acronis true image and when I insert the new disk into the laptop and boot it, after the system prompt there's a blinking dash at the top left corner of the screen.
    http://forums.lenovo.com/lnv/board/message?board.id=Z_Series_Thinkpads&message.id=469&query.id=23938...
    This user seemed to have experienced the same issue as me. Unfortunately, no reply to his post
    Drive is detected in the BIOS, PC doctor reports no problem on both the short and extended test... And to top it off, if I insert the driver into my HP laptop windows will start loading as expected
    Are lenovo laptop cursed?
    Any help is appreciated!

    I fixed the issue. I researched many many forums and found no help on any of them, and sorry-no help on this one either.
    What solved the issue - and I hope this helps someone else who has the same problem:
    1).  Install new hard drive (with or without osx pre installed)
    2).  Remove all ram
    3).  Power on and wait 1 minute
    4).  Hold power button until it turns off
    5).  Install ram
    6).  Power back on
    7).  BOOM! It works again.

  • Problems with set up disc after upgrading hard drive

    I am having problems starting up my Macbook after upgrading the hard drive from 80GB to 160GB.  The new hd is SATA, a WDScorpio.  The pins on the end look the same, and I've had no problem with the physical install.  When I go to start up the Macbook, I get a gray screen and the "flashing manila file w/a question mark" icon.  I load the disc while holding down the "C" key, and all that happens is the disc gets ejected.  What am I doing wrong?  I also have my hd backed up w/time machine in an external hd.  Any ideas?

    Turns out, my problem is a malfunctioning optical drive. My Macbook couldn't read the set up disc. This is the second time in a week that I have had this Macbook into the apple store for warranty repair work. Last week, It was a defective VGcable. Each trip to the Applestore is 115 miles round trip from where I live. I tried to get Apple to give me a new computer, but no dice. I even had a district manager in Boise Idaho hang up on me. It's too bad when they know they have a product which everyone loves, and wants to use. They can set the terms. How many things must go wrong before they just replace the @#$# thing? I bought the Macbook Feb 12th, so it's not that old. I have handled it with the utmost care. Anyway, I've tasted the forbidden fruit, and will continue to use Apple products. Thanks for your help. I'll probably have a much easier time with a computer that works. (knock on wood)

  • Re-installing windows after upgrading hard drive?

    Hi, 
        Ive been searching through Google and on this site but I keep finding info on how to upgrade the hard drive or how to upgrade windows but I cannot find the answer to my specific question. 
    How do I install windows on my Satellite A305-S6905 after upgrading the hard drive? will the software be in the recovery discs that I made of the laptop? Do I have to contact toshiba for the discs? Will I need to enter a software KEY?

    Satellite A305-S6905 
    How do I install windows on my Satellite A305-S6905 after upgrading the hard drive? will the software be in the recovery discs that I made of the laptop? Do I have to contact toshiba for the discs? Will I need to enter a software KEY?
    You don't install anything. You restore the hard disk by laying down all the bytes it needs - one at a time.
    The recovery discs that you created will restore the hard drive to its original factory-new contents. No product key is necessary because that installation is preactivated.
    See the section Hard Disk Drive Recovery using the Recovery media, starting on p. 66 in the User's Guide.
       Satellite A300 Series User’s Guide
    -Jerry

  • 13" Macbook pro random freezing after upgrading hard drive.

    i have a 2010 mbp 13" 2.4
    I upgraded the hhd from the 250 to a 320 5400 RPM drive i cleared the cache did a clean install of osx 10.6 grabbed all the updates and then rolled my time machine to restore all my files.
    But now it randomly freezes for about 4-7 seconds. It's extremely annoying and i can't figure out why. Short of a clean install any ideas on what might fix this?
    Thanks

    The AHT does test the graphics chips. Run the extended version and see if anything shows up in the form of an error code. Also, there may be a crash log in Console. Try to run something processor intensive so the Mac freezes, and then run the AHT. Heat could be a factor.
    Do you have access to an Apple Store? If so, make an appointment at the Genius Bar and bring in your Mac for evaluation. They would probably have a more comprehensive hardware test they could run. If you get any error codes, bring those along.
    It sounds like you could have some sort of hardware problem here. Since you are under warranty, it might be time to let Apple diagnose and fix it. It sounds like you may have had video issues during the first week of ownership with the original hard drive, and these may actually be independent of the hard drive.
    Good luck!
    Good luck!

  • Unable to download e-books after PC upgrade.  I recently upgraded my laptop to one from the same vendor so all I had to do was to upgrade a few drivers on the hard drive.  Unfortunately my copy of ADE is not so cooperative.  Every time I try to download a

    I recently upgraded my laptop to one from the same vendor so all I had to do was to upgrade a few drivers on the hard drive.  Unfortunately my copy of ADE is not so cooperative.  Every time I try to download an e-book I get the message "E_AUTH_BAD_DEVICE_KEY_OR_PKCS12".  Uninstalling ADE (all three versions) along with cleaning the registry does not clear the error.  And I cannot de-authorize and reauthorize my new laptop as the de-authorize option is greyed out.  Anyone else encounter this issue?

    Problem solved finally.  Used regedit.
    https://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html

  • DC Offset problem with Peak 4.14 on MacMini after new hard drive upgrade

    Tiger 10.4.11
    Bias Peak 4.14 (24-bit 44.1 AIFF files)
    USBPre 1.5
    The reason for this new topic is a problem that developed with Bias Peak 4.14 on my MacMini. Suddenly, when I apply the "Remove DC Offset" DSP process to a recording, the Bias Peak meters may stop displaying correctly.
    About 50% of the time, only one meter will respond to the sound, or neither will (the meters work fine on the raw file before I apply the DSP function). The rest of the time, they work normally after DC Offset. I'm still waiting to hear from Bias about this via their forum, but no-one has responded yet. I don't know if this is just a GUI bug or an indication of a recording problem. The really spooky thing is that the problem only shows up part of the time.
    This is happening on a new installation of OS X on a new drive that I installed. See a note at the bottom of this post for a hardware issue that may or may not play a role.
    I've been recording vinyl successfully for a long time now on my MacMini (24-bit 44.1 AIFF), using a USBPre external A/D converter and Bias Peak (currently v4.14). But recently Peak froze as it was saving a file. I had to do a hard shut down which led to a corrupted system. I'd been meaning to upgrade to a larger drive anyway, so I put a 120 gig drive in.
    After first installing/updating OS X on the new drive, and installing/upgrading Bias Peak, I had no problems. But then the control panel for the USBPre froze as I was getting ready to shut down. This worried me, so I ran diagnostics with TechTool and installed eDrive. The meter problem began showing up after this change. I wiped out the partition and reinstalled from scratch again, hoping that this would get things back to normal. But I still have the meter problem after applying DC Offset. Note, I created two partitions on the drive, and put Tiger on the first partition.
    The makers of the USBPRe (Sound Devices) say there is nothing about the USBPre or drivers that should be causing this.
    So I'm stuck, and faced with the following ideas for what might be wrong:
    1. Peak has a bug that I've somehow triggered. This may or may not be affecting the recording.
    2. Something about my recording hardware/driver has changed that is "corrupting" my recordings sometimes, and this is causing Peak to have trouble metering the sound.
    3. I screwed up my computer hardware and this is screwing up the recordings part of the time. See my upgrade note* about the hardware.
    4. The new drive seems to be a little slower to display folder contents. I wonder if this apparent latency could be causing the DC Offset problem in the original recorded file.
    * Upgrade note: When I tried to put the cover of the Mini back on after upgrading my drive and testing it out, I discovered that I hadn't screwed the drive/fan/DVD setup in correctly. The screws had fallen out and disappeared (my tiny screw driver made it very hard to tighten the screws I guess. I thought I’d done it correctly).
    I turned the Mini upside down a couple of times before I discovered the screws missing.. My first attempts to put the cover on with the Mini sitting upright were not successful, so I turned it upside down to take the cover back off. The screws probably fell out then. When I tried putting the cover top down on the table and lowering the Mini into the cover I discovered that the drive/fan/DVD assembly was loose!
    The drive is now secured completely except for the screws, and it is working. The slowness I mentioned above is something I noticed before the screws fell out, but obviously the assembly was not secured 100% even before I lost the screws.
    I apologize for this convoluted post and hope it is clear enough. Please help if you can, I'm under pressure to finish my recording project.
    Vinyl_Man

    Hello, DaddyPaycheck,
    The USBPre is powered by the USB bus, and it is plugged directly into the MacMini.
    The screws remain in hiding. I'm amazed that I didn't find them on the motherboard or something like that. If they don't turn up fairly soon, I'll try to get replacements from an Apple service center. And I'll make sure I have a better small screwdriver.
    I just did a test with Audacity for OS X and Cool Edit for Windows. I opened files that give me the meter problem in Peak and removed the DC Offset. When I opened the files I had modified in Audacity and Cool Edit, Peak metered the sound correctly. Somehow Peak is sensitive to something in the file that does not bother the other apps, and when the other apps have adjusted the DC Offset, Peak is happy. Peculiar.
    I'm thinking about recording with Audacity now instead of Peak. I'm still concerned that something is wrong, though, since I don't understand the problem.
    -Vinyl_Man

  • Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine.  Do I have to wait for Seagate to update their drivers for this hard drive?

    Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine.  Do I have to wait for Seagate to update their drivers for this hard drive?

    I tried your suggestion, and it's been giving me the message "Preparing for Backup" for the past 8 hours.  Does this mean TM is backing up my hard drive?  I'll give it a few more hours, but if nothing else happens, I'm not sure what else to do.  I'm not sure if there are any new external hard drives that are compatible with ML yet. 

  • Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Recovering playlists after new hard drive installed in computer

    The computer repair store explained that all of my itune music was exported to my external hard drive before they installed an upgraded hard drive into my old computer. I was able to retrieve my songs from my external drive and put them into my "new" library after I downloaded itunes software onto my new hard drive. I seem to have LOST all of my playlists during the transfer to/from the external hard drive. How do I retrieve these playlists? Thanks for your help.

    Did they also copy the iTunes Library.itl file as well as the iTunes music folder? This is the database of the songs in your library and the playlists and other info.
    If they deleted the file, iTunes creates a new, empty copy when you re-install it, but any playlists are lost.
    If you still have them on your iPod, then a 3rd party app may help.
    If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
    iPodRip also has the feature enabling you to reconstruct playlists.

  • Upgrading hard drive... need help on how to prepare current CS6 for reinstall on new hard drive

    I'm about to upgrade my hard drive to a larger one and will need to reinstall my CS6 Web/Design Suite... I've seen many people having issues with activation and licensing after they reformat their computers or buy a new one and try to install the programs on the new "system". How should I go about preparing my Adobe software on the current hard drive so I won't have any issues resintalling on the new hard drive? I will be installing CS6 Student/Teacher version on Windows 7 Pro 64-bit...
    Thanks for the help!

    Thanks!
    I wondered if that was all I needed, but when I built my new system and installed PS CS4 I kept getting errors. So, I went back to the old system and deactivated it and still got errors. Uninstalled it deactivated and still got errors on the new system. When I talked to Adobe they just kept telling me the key was invalid (even though I had been running that same program and key for the last 4 years without problems lol) and it was not a burnt copy or pirated. I had the orginal box with the original DVD case and serial number on the case... A friend of mine had upgraded their rig and went to a Suite so he gave me his CS4. But, needless to say (as it is said all over these forums apparently) Adobe was of no help at all so I had to buy a new version. I'm not looking to go through all of that BS again, haha.
    So as long as I deactivate the Suite (or do I need to deactivate each program separately?) I should be able to reformat (or upgrade hard drives) and reinstall CS6 as many times as I want? (I usually do a reformat like once a year to keep my computers clean and free of junk that may have been downloaded by other household members...)

  • Recovering after a hard drive crash and restore

    I have a question before I sync my iPod again;
    I had a operating system hard drive crash a little while ago, and I reimaged my drive with a three month old backup, basically I rolled back my computer's state a couple months, and with it, the state of my iTunes library.
    Now, my library is going to be missing songs that my iPod has, does this mean when I sync my iPod again iTunes is going to delete those songs it doesn't know about anymore? I don't recall seeing the option to "manually manage" the iPod anymore, but even in that case does this mean I can't automatically sync again?
    I understand that I can't use iTunes to pull songs off my iPod but thats not what I want. Essentially I want to rebuild my iTunes library list from what the iPod has, even if it can't find the songs on the local disk anymore, I just don't want them deleted.
    Maybe I'm approaching this problem the wrong way..

    Hi there,
    I'm struggling with the exact same issue, so I'm hoping you get a response soon from someone who knows what the g-o may be... I did sync my iPod after my hard drive crashed, but I had iTunes already configured to 'manually manage' my music, so it didn't clear my entire iPod. I'm just scared of accidentally deleting certain music off my iPod playlist that I didn't burn onto disc & so I'd lose it for good.
    Let's hope someone's got an idea...

Maybe you are looking for