Missing drivers PCI\VEN_1180--..Help!!!!

Missing drivers PCI\VEN_1180……..Help!!!!
After upgrading to Windows 8.1 from Vista:
I am missing the following drivers for Base System Device here is the information for the driver.
I am unable to use my Built in Camera, CD/ROM Drive, System speakers.
HP Pavilion dv6000
HP Pavilion dv6500 on the label
Dv6552ea on the label
Product NO: GT374EA #ABU
PCI\VEN_1180&DEV_0592&SUBSYS_308F103C&REV_12\4&11e13b16&0&2B40
PCI\VEN_1180&DEV_0812&SUBSYS_308F103C&REV_12\4&11e13b16&0&2C40
PCI\VEN_1180&DEV_0803&SUBSYS_308F103C&REV_12\4&11e13b16&0&2A40
Please can anyone help me install the missing driver thank you?

Paul Tikkanen,
Thank you very much for your reply, unfortunately, I have already installed these drivers including the previous versions with no luck.

Similar Messages

Missing drivers PCI\VEN_1180--..please help

Missing drivers PCI\VEN_1180……..Help!!!!
After upgrading to Windows 8.1 from Vista:
I am missing the following drivers for Base System Device here is the information for the driver.
I am unable to use my Built in Camera, CD/ROM Drive, System speakers.
HP Pavilion dv6000
HP Pavilion dv6500 on the label
Dv6552ea on the label
Product NO: GT374EA #ABU
PCI\VEN_1180&DEV_0592&SUBSYS_308F103C&REV_12\4&11e13b16&0&2B40
PCI\VEN_1180&DEV_0812&SUBSYS_308F103C&REV_12\4&11e13b16&0&2C40
PCI\VEN_1180&DEV_0803&SUBSYS_308F103C&REV_12\4&11e13b16&0&2A40
Please can anyone help me install the missing driver thank you?

Paul Tikkanen,
Thank you very much for your reply, unfortunately, I have already installed these drivers including the previous versions with no luck.

Missing driver PCI\VEN_1180

Missing drivers PCI\VEN_1180……..Help!!!!
After upgrading to Windows 8.1 from Vista:
I am missing the following drivers for Base System Devices here is the information for the driver.
I am unable to use my Built in Camera, CD/ROM Drive, System speakers.
HP Pavilion dv6000
HP Pavilion dv6500 on the label
Dv6552ea on the label
Product NO: GT374EA #ABU
PCI\VEN_1180&DEV_0592&SUBSYS_308F103C&REV_12\4&11e13b16&0&2B40
PCI\VEN_1180&DEV_0812&SUBSYS_308F103C&REV_12\4&11e13b16&0&2C40
PCI\VEN_1180&DEV_0803&SUBSYS_308F103C&REV_12\4&11e13b16&0&2A40
Please can anyone help me install the missing driver thank you?

Paul Tikkanen,
Thank you very much for your reply, unfortunately, I have already installed these drivers including the previous versions with no luck.

Windows 8 - Missing drivers PCI

Hello,
I am using ThinkPad X301 (2776-LFG).
I installed Windows 8 Pro Full 64-bit but when I open Device Manager found this:
PCI Serial Port Driver not installed
PCI Simple Communications Driver not installed
Finger print sensor not installed
I ran System Update ThinkVantage with no any success.
Any help, please?
Thank you.

Paul Tikkanen,
Thank you very much for your reply, unfortunately, I have already installed these drivers including the previous versions with no luck.

How To: Debug missing Drivers in MDT

The definitive post on missing drivers in MDT (most comprehensive list I've done so far)…
Please to NOT post questions from this thread, instead create a new thread.
How to debug Network Driver Problems
One of the earliest hurdles an MDT administrator will come across is the management of device drivers, specifically networking drivers. With most other drivers, like Audio, printer, and video drivers, a quick call to Windows Update or install over the network
will resolve the Installation. However unless the Network (and storage) Drivers are installed into Windows from the start, it will be much more difficult to install the rest of the system.
This post should help you get started if you find a machine that did not install a device driver properly, and you want to know how to find and import the correct drivers.
Installing network drivers in the
full OS
Step 1 - Try network connection again
It's possible that you might get a DHCP error from MDT, but when you try again later to connect the Deployment Share it works! This may be caused by a slow or malfunctioning DHCP server in your network. Re-check your DHCP servers, ensure that PortFast is enabled
on your routers. If all else fails get your network administrators to document the DHCP delay. A long delay in modern networks is unnecessary.
Step 2 - Verify connectivity
You may not have a driver problem but a network problem. Check the physical connection on the computer (Network installs on MDT *REQUIRE* a wired network connection, no Wi-Fi). Open a web browser. Check the IP Address (ipconfig.exe /all). Ping the Deployment
Server, manually connect to the Deployment Share. IF you can't connect to the Deployment Share, neither can MDT.
Step 3 - Find the Correct Driver Package
Before you load the driver into MDT, first verify that you have the correct driver. There are scenarios where you may *think* you have the correct driver, but the driver will never run because the package is designed for a different OS/SKU/Platform/whatever.
Install the driver package by:
  ○ Open the Device Manager (devmgmt.msc).
  ○ Find the network device in the list (ensure this is the wired device, not the wireless device)
  ○ Right click on "Properties" and click on the "Details" tab.
  ○ From the "Details" tab, select the property "Hardware Ids" select all the values, and copy to the clipboard, it would be a good idea to save for later. Should look something like:
      PCI\VEN_8086&DEV_1502&SUBSYS_21F317AA&REV_04
      PCI\VEN_8086&DEV_1502&SUBSYS_21F317AA
      PCI\VEN_8086&DEV_1502&CC_020000
      PCI\VEN_8086&DEV_1502&CC_0200
  ○ From the "Driver" tab, click on "Update Driver…", click on "Browse my computer for driver software" locate the driver package on the local machine or USB Drive, and install the package.
  ○ You should get a confirmation that the driver package was installed.
  ○ IF you do not get confirmation, MDT driver installation may not work.
Windows will install the driver starting with the *.inf install package, and will typically include a *.sys (binary) and a *.cat (digital Signature). If the driver package has been re-packaged into a *.cab, *.zip, or other compressed *.exe file, the
package must be extracted first. This is a hard requirement for any driver used by MDT and/or SCCM. All driver packages that are signed by Microsoft (WHQL) will be installed from the *.inf file, and you should only use devices that have the Microsoft WHQL
Logo as a sign of quality.
If you need a help on where to find driver packages for your devices, the 3 largest Computer OEM manufacturers supply drivers grouped by Make and Model that are easily imported into MDT and SCCM. See:
http://deploymentbunny.com/2014/07/08/back-to-basicwhere-to-find-drivers-for-servers-and-clients/
Step 4 - Load driver into MDT
If you have more than 20 driver packages, or if you anticipate you will have more than 20 drivers, you should start grouping your drivers in sub-folders for organization. One popular method is to group by Computer Make and Model. Ensure that you are using the
correct Driver Selection Profile in your task sequence. If you are unsure, disable any selection profile(s) to ensure the driver is installed correctly.
Step 5 - Run the full MDT installation
During installation MDT will perform the following:
  ○ Run the PNPEnum.exe utility and capture output to PnPEnum.xml. The VEN_Xxxx and DEV_Yyyy from the "HardwareIDs" property above must be present in this list. Otherwise we won't have a match.
  ○ Search through the %DeployRoot%\control\drivers.xml file looking for a match for the HardwareID. MDT may filter the search based on the folder search type.
  ○ MDT will copy each matching driver to the local c:\drivers directory using the xcopy.exe command. You can search (grep) for the string "xcopy" in the ZTIDrivers.log file, that will get you list of all driver packages matched by MDT.
  ○ MDT will allow the machine to boot into the NEW OS, and Driver Installation will begin in the OS. IF there are multiple drivers found and copied locally, the Windows (not MDT) will determine the best one. The c:\windows\inf\SetupAPI.*.log files
will detail which drivers copied locally were installed (or *not* installed).
Installing Network Drivers in
WinPE
Step 6 - Try the network connection again
(See above
Step 7 - Verify Connectivity from within WinPE
Verifying network connectivity will be a bit more difficult in WinPE, since we have a limited User Interface, so all investigation must be done in the debugging mode (Press F8) cmd.exe
  ○ Try connecting to the Deployment Share:
  c:\> net use * \\MDT\DeploymentShare$ /u:UserDomain\UserName *
  ○ Try pinging the Deployment Server:
  c:\> Ping.exe MDT.Corp.contoso.com
  ○ Verify that you have an IP address ( ipconfig /all ) If you have an AutoConfiguration address - Driver OK - WinPE can't reach the DHCP server. If you have "Media Disconnected" - Driver OK - Physical adapter not plugged to network. If
no devices are listed - Driver bad - Driver not installed.
  ○ Check the x:\windows\system32\WpeInit.log - This log will show the network driver (if found) being installed.
Step 8 - Verify driver packages are getting included into WinPE
Firstly, verify the correct driver package from within the full OS above. By default MDT will import *all* Storage and Networking drivers into your WinPE image. However it is possible to change the subset of files copied via "Selection Profile" or
other method. Cross check your WinPE Driver Settings.
  ○ From within the MDT console, right click on the root of your Deployment Share and select properties.
  ○ Click on the "Windows PE" tab, and the "Drivers and Patches" sub tab for both x86 and x64.
  ○ Your Network Drivers package must be in the "Selection Profile" if enabled.
Finally verify that the correct Network Driver package is being copied to WinPE. If necessary this may include setting up a debugger to watch the MDT Provider build the WinPE Image from scratch. My preference is to use the SysInternals
http://live.sysinternals.com/Dbgview.exe tool.
  ○ Open up the MDT console.
  ○ Download and run the DbgView.exe tool.
  ○ Update the deployment share in question.
  ○ The DbgView tool should show what drivers were copied to each WinPE Image.
Other
Whenever you add a driver into the MDT console, you must update the deployment share for that drivers to be added to your WinPE Image. If you are unsure, select "Completely regenerate the boot images." to ensure the drivers is imported. Additionally,
you must copy the updated LitetouchPE_x??.wim and *.iso files to the other consumers of the WinPE image like WDS/PXE and or any USB offline media.
Note that some Broadcom NetXtreme class of drivers have a multi-function driver architecture that may have difficulty loading in WinPE. Ensure that you load the "RIS" class of drivers from Broadcom in your MDT environment.
Note that by default MDT does *NOT* support the installation of Windows over Wireless network devices (Wi-Fi). The MDT installation sources must either be available through wired networking, or offline (USB Flash) media.
This post does not discuss origination of drivers within MDT ( Chaos vs. Total Control ), that is a different topic.
http://www.deploymentresearch.com/Research/tabid/62/EntryId/112/MDT-2013-Lite-Touch-Driver-Management.aspx
Further Help
If you are still having problems with drivers in via MDT, ask the experts in the MDT Technet Forum:
Include a short description of the problem. Including the Make/Mode if necessary.
Include the HardwareIDs from the Device Manager (Devmgmt.msc) into the post (from above).
Copy your known good driver package (step 3 above) to OneDrive.
Copy the following log files to a public site like OneDrive and include the link:
  ○ PnpEnum.xml (from Client)
  ○ Bdd.log (From Client) - or at least the ZTIDrivers.log file.
  ○ c:\windows\inf\SetupAPI.*.log (from client)
  ○ %DeployRoot%\control\Driver*.xml
  ○ %DeployRoot%\control\SelectionProfile*.xml
  ○ %DeployRoot%\control\settings.xml (if problems in WinPE)
  ○ x:\windows\System32\WpeInit.log (if problems in WinPE)
  ○ If the MDT server is not including your driver package in WinPE include the DBGView log.
This post is by Keith Garner - Keith was a developer on the MDT team where he developed the ZTIDrivers.wsf script, he also worked for the Windows Hardware Quality Labs as a technical PM on Driver Quality, and developed samples for the
Microsoft Device Driver Kit (DDK) specifically around the area of Device Driver installation in the OS (Windows NT 5.0, 2000 and Windows XP). (So yes, I know drivers :^).
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

OK. I have redone the drivers for WinPE which has reduced the image size by about 200MB. Unfortunately the problem persists.
Is there anyway to turn on some sort of boot logging so I can see what driver it is failing on?
I am also still seeing the weird behavior of it working over PXE but blue screens when booting from USB. Can anyone explain that?
JJ

Missing drivers for hp pavilion windows 8.1 64bit

missing drivers on my new hp pavillion 15-d005sia windows 8.1
like: PCI Encryption/ Decryption Controller
SM Bus Controller
Unknown Device
High Definition Audio Device

Here are the specs for your HP 15-d005sia Notebook Computer. Windows 8.1 drivers for this model can be found on the HP 15-d005sia Notebook PC Drivers page.
Intel Trusted Execution Engine Firmware
Intel Chipset Installation Utility and Driver
Realtek High-Definition (HD) Audio Driver
For the unknown device, please post the Windows Device Manager's "Hardware Ids" (text string only, please) as shown in the example below;
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Missing Drivers

Hello,
I am using T420 and am missing 2 drivers:
1. I am missing the PCI Serial Port Driver
2. I am missing the PCI Simple Communications Driver
Am using Win XP SP 3 and have downloaded the Lenovo Think vantage toolbox to diagnose and fix but it did not help.
Any help is appreciated.

ColonelONeill schrieb:
They'll be the Intel Management Engine Interface stuff.
If you don't use it, you might as well just disable the devices instead.
...in the BIOS
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Missing drivers for unknown device

Hi all, I installed Windows 8.1 on a HP Pavilion Notebook - 15-p101 and managed to fix all missing drivers but this one.
Device unknown
Location: on PCI Bus
ACPI\HPQ6007\3&11583659&0
Any help would be greatly appeciated. Thank you.
This question was solved.
View Solution.

Hi:
You need this driver...
HP 3D DriveGuard Software
File name: sp67280.exe

Qosmio G40 - Windows 7 64bit and missing drivers

Hello..i recently upgraded my G40 to win7 64bit and have been very dismayed at all the missing drivers.
so far
1 Cd/hd dvd drive - driver not supported on this product - it was when it was on vista 32 - now i just get cd drive error.??
2 tv tuner - no driver available
3 av controller - no driver available
4 acoustic silencer - no driver available
5 finger print software - installed driver - no hardware found?? it definatly has one ..im looking at it.
6 hdmi control manager - no driver available
7 infrared driver- no driver available
some of these drivers i can do without - (finger print im not worried about 0 but the CD/HD DVD drive is a real problem..
Im normally reasonably fine with installing all these drivers...but it seems there are non there ..or they dont see the hardware....please help.

Wait a moment you are mixing something.
Do not mix CD/DVD driver and HD DVD driver.
When you install operating system optical disc drive must be recognized properly. If you have problem watching HD DVD movies that completely other issue.
So, is optical disc drive recognized properly? Can you use music CDs and watch DVD movies?
If you cannot find Toshiba HD DVD player for 64 bit OS try to use some other players. I don't have HD DVD media and cannot test it for you.
PCI memory controller is maybe cardreader.
By the way, here is the list of all installed stuff on Qosmio G40 (Vista) so you can check if everything is installed and if there is some missing driver. Please note: some additional software is not downloadable.
Windows Vista Home Premium
Intel Chipset SW Utility
TOSHIBA Value Added Package
NVIDIA Display Driver
Realtek HD Audio Driver
Synaptics TouchPad Driver
TOSHIBA Software Modem
Intel 82566MC Gigabit Network Connection
Intel PCI Express Wireless LAN Driver (802.11ag)
Intel Proset?PCI Express 802.11ag?
Intel Proset (PCI Express Kedron Main(abgn))
Bluetooth Stack for Windows by Toshiba
Bluetooth Monitor
TOSHBIA Fingerprint Software
Texas Instruments FlashMedia Driver
Chicony Camera Assistant Software
TOSHIBA PCI TV Tuner
SMSCIR Infrared Receiver Drivers
TOSHIBA SD Memory Utilities
TOSHIBA Assist
TOSHIBA ConfigFree
CD/DVD Drive Acoustic Silencer
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Remote Control Manager
TOSHIBA Speech System
TOSHIBA HD DVD PLAYER
TOSHIBA SPS Driver
Qosmio AV Controller Manager

Various missing drivers after re-installing Win7 64 bit on hp pavilion dv7-6111eo

Aloha
First off... I'm no techy, geek or nerd... And I mean those words in the best way, to those who are.
In this case You need to see me like a kid in kindergarden, being taken by the hand, and being shown what to do, down the the last detail. Sad but true.
Without me knowing why, I experienced missing several DLL-files, and often got error messages about those.
A pain in the neck, so I re-installed Windows 7 64 bit, as I didn't want to mess with those DLLs missing.
After that re-installing, I couldn't get internet-connection to my router. Luckily I have a 10+ year old stationary, where I after some time found the driver I needed, so that works now.
But now it seems there's several other drivers missing/not been installed.
I got a little info, from another post, what to provide with info, and hope that will be enough. if not, then please let me know the additional info that may be needed, and where I can find those on my PC, so I can provide these.
Missing drivers:
Network Controller;
Hardware ID: PCI\VEN_8086&DEV_008B&SUBSYS_53158086&REV_34
SM Bus Controller;
Hardware ID: PCI\VEN_8086&DEV_1C22&SUBSYS_1659103C&REV_05
Universal Serial Bus (USB) Controller;
Hardware ID: PCI\VEN_1033&DEV_0194&SUBSYS_1659103C&REV_04
I have 4 USB-ports, but only one will work, the others don't respond, and I need all four running at the same time. Plus I'd like to have everything in order after I had to re-install Win 7.
I thank You in advance for any and every help I can get. Just have in mind, that I need the things carved into paper.
This question was solved.
View Solution.

Hi:
You need these drivers...
SM Bus Controller; Install this first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-2&cc=us&dlc=en&lc=en...
Network Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99014-2&cc=us&dlc=en&lc=en&...
Universal Serial Bus (USB) Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100294-2&cc=us&dlc=en&lc=en...
You will also need this bluetooth driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99500-2&cc=us&dlc=en&lc=en&...

W500 missing drivers... AGAIN!

Hi,
i formatted my W500 w7 x64 at least 4-5 times in the past 2 years, and every time i used a link here to download the missing drivers and everything was working fine.
But not this time, i can't figure out why and i've tried several alternative solutions, still no luck. I am stuck not being able to install
PCI serial port
PCI simple communication controller
here are the list of what i tried: (some of them solved other missing drivers)
6fuj42u6
6iio10ww
6ixr07ww
6ixt09ww
7kss55ww
7kxv51ww
7vd616ww
7vr308ww
Last one i tried is AMT 4.2 update, but it doesnt work (crashes if run win admin rights, looks like it processes if not run with admin rights, but does not work, blabla... lots of fun)
Thank for your help.

Maybe driver install is failing somehow? Check in Event Viewer for anything relevant.
In any case, I don't think either one is particularly useful, anyway. If you don't need them, disable both and move on.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Notebook 2560p missing drivers

Hi Guys, If anyone can help me please finding missing drivers of my "elitebook 2560p"It has 32 bits - windows 7 professional. list of the missing drivers are PCI\VEN_197B&DEV_2392&CC_0880
PCI\VEN_197B&DEV_2392&CC_088000
PCI\VEN_197B&DEV_2392&SUBSYS_162B103C
PCI\VEN_197B&DEV_2392&SUBSYS_162B103C&REV_30..................................
USB\VID_138A&PID_003C
USB\VID_138A&PID_003C&REV_0086
...................................*HPQ0004ACPI\HPQ0004
..................................PCI\VEN_8086&DEV_1502&CC_0200
PCI\VEN_8086&DEV_1502&CC_020000PCI\VEN_8086&DEV_1502&SUBSYS_162B103C
PCI\VEN_8086&DEV_1502&SUBSYS_162B103C&REV_04 Thanks in advance,Cheers

Hi: Below are the links to the drivers you need... PCI\VEN_197B&DEV_2392: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5071202&swItemId=ob_116003_1&swEnvOid=4053 USB\VID_138A&PID_003C: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5071202&swItemId=ob_134806_1&swEnvOid=4053 ACPI\HPQ0004: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5071202&swItemId=ob_125640_1&swEnvOid=4053 PCI\VEN_8086&DEV_1502: http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5071202&swItemId=ob_116056_1&swEnvOid=4053

Missing drivers and can't figure out what to install

I have two missing drivers on a fresh install of windows 7 64 bit and can't seem to work out what they are. It's a HP notebook 2000 365DX They show up under 'Other Devices' one is BCM207020A and when I open it the info says Location Port_#0002.Hub_#0003 the second is PCI Device and when opened it is PCI bus 2, device 0, function 0 Anyone got an idea?

Hi: You need these drivers... This package contains the Broadcom bluetooth driver and software for supported notebook models that are running a supported operating system. Broadcom Bluetooth 4.0 Driver is required to enable Broadcom bluetooth 4.0 devices and is compatible with Broadcom bluetooth 3.0 and earlier versions. File name: sp54245.exe This package contains the driver that enables the Realtek Card Reader in supported notebook models that are running a supported operating system. The card reader enables users to read from or write to supported removable storage cards, which are typically used in digital cameras, digital music players, and cellular phones. File name: sp52186.exe

Missing drivers part II

Hi, I recently formatted a Pavilion 15-n213sl and I re-installed Windows 8.1 (64-bit).
In the Device Manager there are the following devices with missing drivers:
ACPI\HPQ6001\3&11583659&0
ACPI\HPQ6007\3&11583659&0
\VEN_10EC&DEV_5227&SUBSYS_2166103C&REV_01\4&8a0a5ec&0&00E1
Someone could help me to find them?
Thanks in advance,
Gugliemo
This question was solved.
View Solution.

Hi,
The first 2 drivers you need are on the reply to your earlier post on the link below.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Missing-drivers/m-p/4906167#M28...
The 3rd driver you require in on the link below.
Card Reader Driver.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Missing drivers windows 8

hi
i have a problem after upgrading to windows 8
the following hardware
PCI\VEN_1180&DEV_0843&SUBSYS_330517C0&REV_01
PCI\VEN_1180&DEV_0843&SUBSYS_330517C0
PCI\VEN_1180&DEV_0843&CC_088000
PCI\VEN_1180&DEV_0843&CC_0880
and
PCI\VEN_1180&DEV_0592&SUBSYS_330517C0&REV_0A
PCI\VEN_1180&DEV_0592&SUBSYS_330517C0
PCI\VEN_1180&DEV_0592&CC_088000
PCI\VEN_1180&DEV_0592&CC_0880
hope you can help me
regards Eric
This question was solved.
View Solution.

Hi, Eric:
It isn't easy to provide the info you want without knowing the full model number of your notebook.
See if this driver works...The hardware you need the driver for is the Ricoh card reader.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55520-1&cc=us&dlc=en&lc=en&...

Missing drivers PCI\VEN_1180--..Help!!!!

Similar Messages

Maybe you are looking for