Missing Dynamic Pages and SEO

Hello I have a details page that takes the URL parameter
Product-Code and displays the details for that product. Now what
happens when I remove a prduct from the database and that URL still
exists in the Search Engine indexes. I noticed that even though the
product code doesn;t exist anymore the page still executes and
shows all blank information. So basically I'm going to have all
those old product pages in search engines with no info and run teh
risk of duplicate content penalty. What shoudl I do. The site is
programmed in CF. You can see what I mean by visting the site
www.juniorbaby.com and click on a product and change the product
code in the URL. The page will load with no info. I feel my ranking
has been dropping and this might be the problem. The serach engine
must think all those old pages are all the same. Any help would be
greatly appreciated.
Pete

1) SE != spider : some spiders follow rules you set in meat
tags,
robots.txt, rel ttributes etc, others do not.
2) <cflocation> tag basically means http code 301 "temp
moved" (or is it
302?): in cf8 you can set cflocation to return 301 or 302
code
(temp/permanently moved, whichever one is which).
3) use cflocation inside cftry/cfcatch (around retrieve
product details
query) block to redirect your users to a full products
listing page
4) google webmaster tools lets you request removal of a url
from
google's search index - do that. if you are not using google
webmaster
tools - shame on you!
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Similar Messages

Dynamic pages and redirection to framesets

Is it possible to send dynamic data to a page that occupies one frame in a frameset............and then to do a redirection from that frame to the frameset as a whole? I was hoping my dynamic data would then appear in it's correct place in the frameset. But it doesn't seem to work.
Instead it embeds the entire frameset within the one frame where I sent the dynamic data originally. So I end up with a frameset inside a frameset. Very frustrating
dm225

your recordset query returned no results...
do you have a error trap for no records returned like
<%
if not Recordset1.eof then
%>
<img src="<%=Recordset1("dphotos")%>" alt="">
<%
else
response.write "Something went wrong...." &
err.description
end if
%>
this will help you diagnose errors
or
<%
if not recordset1.eof then
NXB=1
end if
%>
<img src="<% if NXB=1 then response.write
Recordset1("dphotos") %>" alt="">
Mike K
"Genxbyapinch" <[email protected]> wrote in
message
news:ed2ldu$r0$[email protected]..
>
>
> I have been searching for help ( more than a few days)
but have not yet
found
> anything that works.
> My database connection is ok
> My record set comes up with data ie test is okay
> I have followed the instructions for putting data on
results page ie
dragging
> and inserting, primarily I want to
> show images from my access 2002, but anything other than
that would be
good.
> I did read that access doesnt support binary data but on
a sample database
in a
> course I was doing they used access for displaying
dynamic content so I am
> !confuSed!.
>
> I have Dreamweaver 8, I am using OBDC, I have enabled
permissions, my
server
> brings up my home page with search form ok.
>
> detailed error: 800a0bcd, eigher BOF is True or the
current record has
been
> deleted , It then gives me the line# I have many books
but none on asp and
> vbscript so am floundering,
> <img
src="<%=(Recordset1.Fields.Item("dphotos").Value)%>"
alt="">
>
> Thanks for any help
>
>
>

Missing templates (Pages and Keynote)

Could anyone please help answer if templates were removed and are not included in the most recent versions of Pages 5.1 and Keynote 6.1?
Specifically:
1) Did Pages 5.0 have a template for "Grove Surfboards?"
2) Did Keynote 6.0 have a template for a presentation titled, "The History of Pigments?"
I recently upgraded from Pages 4.3 to 5.1 and Keynote 5.3 to 6.1, and unfortunately, I am worried that I missed out on the above creative templates.
Any helpy clarifying would be much appreciated.
Thank you,
Kim

Apple has helped you to “miss out.” Pages v5+ has dropped several templates from your Pages v4.3 experience, due primarily to about 100+ missing features and functionality in the application that adversely affect those former templates.
Recommendation. Pages ’09 v4.3 remains in /Applications/iWork folder. Use it to great productivity until Apple restores missing functionality to Pages v5+.

Epub export problems - missing last page and 'Page error'

I couldn't find answers to this elsewhere - my apologies if this has been answered. My version of InDesign is 6.0.4 on Windows 7, 64 bit. I have two issues with exporting from InDesign to epub format.
The first is that on some longer documents, which display OK in Sony's Reader Library software, I get a 'page error' when trying to read them on Sony Reader Touch Edition. I have found that I can 'correct' them by loading into Calibre Library Mangement software then saving them out from there. This may be a problem with the Sony Reader Touch software in which case has anyone come across a similar problem? The Reader can cope with the files, but not how they are exported from InDesign.
The second problem is that even when I appear to export OK the epub document occasionally has just the last page missing - a few lines that have run over onto a final page do not get incorporated. These are simple InDesign documents, not books with chapters or linked files. The problem does not happen all the time but appears to depend on just where the flowed text in the epub happens to finish. I have found a workaround for this too - in the original document I add one full stop/period per line (adding blank lines is no good as the export ignores them) to force an extra page in the InDesign original. This is OK as a workaround but it would be nice if I didn't have to do it!
Any help would be appreciated. Thanks
Colin

you need the 7z file in addition to the exe
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

In a dynamic page how to share variable between PL/SQL and javascript

For example, my dynamic page contains such PL/SQL codes:
<ORACLE>
DECLARE
info varchar(100);
rowid urowid;
procedure doDelete(
row_id in urowid
) IS
begin
Delete From xxx
WHERE rowid = row_id;
end doDelete;
BEGIN
Select name, rowid INTO info, rowid
From xxx Where xxx;
HTP.PRN(' <INPUT TYPE="button" VALUE="show value" onClick="alert(info);">');
HTP.PRN(' <INPUT TYPE="button" VALUE="delete" onClick="doDelete(_row_id);">');
END;
</ORACLE>
The variable 'info' and '_row_id' are correct, however the two HTP. sentence do not work. What's the problem?
What I want to do is to show all the records in TABLE A in a page. And at the end of each line (record), there' re a 'delete' and a 'update' button to let user operate on this record. Is this possible? I know form can do delete an update, but it can not show all the records in a page like what report does. Besides dynamic page, is there any other better choice? Report can do it?
One more question. In a report, I employed link on one field to a second report. It works well. But I want to open the second report in a new window when the link is click. Is this possible?
I was almost driven crazy by these :( I so appreciate if anyone can help.

The code written by you is insufficient for the funtionality you are trying to achieve. Below is a method to achieve the same.
Note: Used standard scott.emp table for the example which is located in my db provider schema.
Do the below modifications as per your local configuration
xxxxx -> Replace it with your Portal schema
yyyyy -> Replace it with your db provider schema
<<module_id_of_form>> -> Replace with the module id of form created in step 1 & 2.
First and foremost... oracle does not allows variables starting with '_'. So if you want to use it you have to place it in double quotes ("")
rowid -> illegal
"_row_id" -> legal.
However, I will advice you not to use variable names starting with "_".
Now lets get started...
1. Create a form on the table you are using in the dynamic page. Just have the update button. Remove the other buttons.
2. Get the module id of this form. Instruction for getting the module id:
a) Right-click on the form's run link and copy the shortcut
b) Get the value of p_moduleid parameter. This is your module id.
3. Create a procedure "save_action_details" in your db provider schema. This procedure will accomplish the delete operation on the record.
     CREATE OR REPLACE Procedure save_action_details(
     p_rowid IN VARCHAR2,
     p_action IN VARCHAR2,
     p_dyn_ref_path IN VARCHAR2,
     p_dyn_page_url IN VARCHAR2)
     is
     l_sto_session xxxxx.wwsto_api_session;
     begin
     l_sto_session := xxxxx.wwsto_api_session.load_session(
     p_domain => 'DynStore',
     p_sub_domain => 'DynStore_' || p_dyn_ref_path
     l_sto_session.set_attribute(
     p_name => 'rowid',
     p_value => p_rowid
     l_sto_session.set_attribute(
     p_name => 'action',
     p_value => p_action
     l_sto_session.save_session;
     htp.init;
     owa_util.redirect_url(p_dyn_page_url);
     end save_action_details;
Explaination: The above procedure creates a session and keeps the rowid and action in the session. This information is used by the below dynamic form to perform the necessary action. In our exampl, the action is always going to be delete so you may go ahead and hard code it, else leave it as it is.
4. Grant execute privilege on the procedure "save_action_details" to public.
sql> grant execute on save_action_details to public;
5. Create your Dynamic page.
a) In HTML code section have the below code. This code shows some columns from the table and "update" and "delete" buttons to perform the respective action.
     <ORACLE>select empno,ename,rowid,
     '<input type="button" value="Update" onClick="doAction(this.form,''UPD'',''xxx'','''
     || xxxxx.wwv_standard_util.url_encode(rowid) || '''); tWin();">
     <input type="button" value="delete" onclick="doAction(this.form,''DEL'',''' || rowid || ''',''xxx'');">' Action
     from yyyyy.emp</ORACLE>
b) In additional pl/sql code section of dynamic page, have the below pl/sql block "in after displaying the header" section.
     declare
     l_sto_session xxxxx.wwsto_api_session;
     l_del_rowid varchar2(20);
     l_action varchar2(10);
     begin
     htp.comment('User code starts here ...');
     htp.p('<script>');
     htp.p('var winHandle;');
     htp.p('
     function doAction(formObj, action, rowid, erowid)
          if (action == "UPD")
          var formURL = "' || xxxxx.wwctx_api.get_proc_path('wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=<<module_id_of_form>>&p_arg_names=_rowid&p_arg_values=') || '" + erowid;
          winHandle = window.open(formURL, "winDynUpd", "width=750,height=500,resizable=yes");
          else
          formObj.p_rowid.value = rowid;
          formObj.p_action.value = action;
          formObj.submit();
     function tWin() {
          if (winHandle.closed) {
          document.location = document.location;
          else {
          setTimeout("tWin()", 500);
     htp.p('</script>');
     htp.p('<form name="dynRowProcess" method="POST" action="'
     || xxxxx.wwctx_api.get_proc_path('save_action_details','yyyyy')
     || '">');
     htp.p('<input type="hidden" name="p_rowid">');
     htp.p('<input type="hidden" name="p_action">');
     htp.p('<input type="hidden" name="p_dyn_ref_path" value="' || p_reference_path || '">');
     htp.p('<input type="hidden" name="p_dyn_page_url" value="' || p_page_url || '">');
     l_sto_session := xxxxx.wwsto_api_session.load_session(
     p_domain => 'DynStore',
     p_sub_domain => 'DynStore_' || p_reference_path
     l_del_rowid := l_sto_session.get_attribute_as_varchar2('rowid');
     l_action := l_sto_session.get_attribute_as_varchar2('action');
     if l_action = 'DEL' then
     delete from yyyyy.emp
     where rowid = l_del_rowid;
     end if;
     end;
Explaination: The session information (rowid and action) stored by "save_action_details" procedure is retrieved by the dynamic page and is used to delete the record.
6. Once you are through with the above steps, test it by placing the above "dynamic page" portlet on a page.
a) When you click on delete button the record gets deleted and the automatically refreshed page will not show the deleted record.
b) On clicking update button, a form will appear. do the necessary modifications in data and click update. the data in the form gets updated. Once you close the form the dynamic page gets refreshed automatically and it will show you the updated information.

Displaying header and border on a dynamic page passing parameters to a form

I am using portals 10.1.4. and am trying to pass parameters to a form which appears as a portlet on a page.
for this, dynamic page has been used to pass parameters to that desired form. my problem is this that when the form is displayed with parameters, the header and borders of the portlet disappear.
The check-boxes for header and borders of the portlets on the page are checked. Yet, when for any reason, the parameters are not passed into the dynamic page, the header of the dynamic page and border are displayed. But when the parameters are passed and the form shows up, then the header and borders disappear.
can anyone help me with the following:
- is it the desired behavior?
- how can i get the headers and borders reappear?
thanks

Any ideas fellows?
how can we control the border and header of dynamic pages when a form or report is called from them with passed parameters?
will appreciate any helpful experiences.

Header and border on a dynamic page passing parameters to a form

I am using portals 10.1.4. I am trying to pass parameters to a form which appears as a portlet on a page.
I am using the dynamic page to pass parameters to that desired form. My problem is this that when the form is displayed with parameters, the header and borders of the portlet disappear.
The check-boxes for header and borders of the portlets on the page are checked. Yet, when for any reason, the parameters are not passed into the dynamic page, the header of the dynamic page and border are displayed. But when the parameters are passed and the form shows up, then the header and borders disappear.
can anyone help me with the following:
- is it the desired behavior?
- how can i get the headers and borders reappear?
thanks

Hi AMN,
I am not sure I follow what you are exactly attempting, can you post a set of steps to reproduce?
Cheers,
Mick.

CASE statement in a dynamic page

I have written a query using a CASE statement in the select portion to evaluate column values and produce a text string. The query runs fine in sql*plus, but when I attempt to add the code to a dynamic page and compile it, I get the following error message:
ORA-06550: line 1, column 720:
PLS-00103: Encountered the symbol "CASE" when expecting one of the following:
( - + mod null <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
table avg count current max min prior sql stddev sum variance
execute the forall time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> (WWV-11230)
Critical Error in wwerr_api_error.get_errors! SQL Error Message: ORA-06502:
PL/SQL: numeric or value error: character string buffer too small (WWV-)
I am running oracle 8.1.7.1.0 using Portal 3.0.9.8.1
I have written a function as a workaround, but would like to know why portal does not seem to like the "CASE" statement.
Any suggestions would be greatly appreciated.

Hi Chetan,
I still get an error message even when I attempt to create a small dynamic page with your cursor. The error message is posted below. I am definitely putting the cursor declaration between <ORACLE></ORACLE> tags. Any Ideas?
Thanks,
Dan
ORA-06550: line 1, column 215:
PLS-00103: Encountered the symbol "CASE" when expecting one of the following:
( - + mod null <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
table avg count current max min prior sql stddev sum variance
execute the forall time timestamp interval date
<a string literal with character set specification>
<a number> <a single-quoted SQL string> (WWV-11230)
Failed to parse as PORTAL30 - DECLARE CURSOR SPN_INMATE_INFO(V_SPN IN VARCHAR2) IS SELECT DISTINCT B.ENAME, B.ENAME||' '||B.ENAME F_NAME, B.DEPTNO, B.SAL, B.HIREDATE, B.SAL, B.EMPNO, B.HIREDATE, B.COMM, B.ENAME, CASE WHEN B.HIREDATE IS NULL THEN 'NO' WHEN B.HIREDATE IS NOT NULL AND B.SAL IS NOT NULL THEN 'NO' WHEN B.SAL IS NOT NULL AND B.HIREDATE IS NULL THEN 'YES' END RELEASED, C.DNAME, C.LOC, C.DEPTNO FROM SCOTT.EMP B, SCOTT.DEPT C WHERE C.DNAME NOT IN ('5397','6497','6498','6499','5011','42-9-44') AND C.LOC NOT IN ('M','F') AND B.ENAME != '00188547' AND B.DEPTNO = C.DEPTNO ORDER BY B.HIREDATE; BEGIN NULL; END; (WWV-08300)

How to create a MD form using dynamic page ?

Rahul and Sharmila,
You have answered several of my queries earlier and I am thankful for them.
I have been trying to creating a MD form using dynamic page and I haven't fiqured it out. I need help. You both advised me on creating a simple form using dynamic page. The complexity changes drastically when I have to create a MD form. Has no body ever tried to create a MD form with dynamic page?
I haven't heard from you anything either. I am stuck with this and I need help urgently. Would you kindly tell me if this is possible and how ? Otherwise, I will stop crying for help on this.
Thanks for your kind attention.
Mainak

Hi,
I have replied to this in the morning.
Re: Oracle portal and JSR 168 compliance
Hope it helps.
Thanks,
Sharmila

Dynamic page in region as a portlet not displaying in portal template

As the title suggests I have a portal template that contains a region at the top . within this region i have included 2 portlets, first is a dynamic page (a simple banner title ) then a navigation page beneath them .
when I am logged in as a specific user it displays correctly , when I log onto the page without logging in - the dynamic page does not display ,yet the navigation page does . I have clicked on every display to public check box , assigned public user with view privilege and everything else along those lines . Any ideas ??
thanks in advance , Chris

Hi Chris: Just to be specific, did you go to the providers tab in Navigator, the locally built providers link then the provider which contains your dynamic page and check the access set directly on that page? You can either set the dynamic page to have its own access (overriding that of the provider) or set the provider itself to be public.
Rgds/Mark M.

Problem with a Link calling a dynamic page

Hi!
I wanted to create a link calling to a dynamic page. This dynamic page displays a PDF depending on the parameter, the thing here is that I don't know how to set the bind variables or more likely how to say that the value of those variables is going to come from the link in which the dynamic page it's been called.
I have my PL/SQL code where I have this bind variables
id_dep
id_tipo
and I went to the Customization Form Display Options button and there i made them public.
now on a page i created a link with the following structure, in order to call the dynamic page and send the parameters.
http://your.portal.com/portal/pls/portal/SCHEMA.DYN_YOUR_DYN_PAGE_NAME.show?p_arg_names=YOUR_PARAMETER_NAME&p_arg_values=YOUR_PARAMETER_VALUEso my links looks like this one:
http://desarrollo06:7778/pls/portal/TRANSPARENCIA.NOSEQUE.show?p_arg_names=idDep&p_arg_values=11&p_arg_names=idTipo&p_arg_values=25so I was told that I had to check that the parameters bindings are present or set, but I don't know how to do that... 'cause I thought I already did...
can youi help me?
thanks In Advance
aTTe
Blume

Hi AMN,
well what I meant was that, see in the manage page for the Dyn Page there are some options bellow, in the one that sais Customize you can test the page, and I put there the values for id_dep and id_tipo as *11* and *25* then run the page and it opens the PDF but when I click on the link you suggested
http://desarrollo06:7778/portal/pls/portal/TRANSPARENCIA.NOSEQUE.show?p_arg_names=idDep&p_arg_values=*11*&p_arg_names=idTipo&p_arg_values=*25*
u_u but it doesn't open the PDF.
...The code I put in my last post is the code for my dyn page, and there's an if where if it doesn't find a file to deploy it show a message that sais "No hay Datos o No Aplica", so when I clic on the link it takes me to the dyn page but shows the message for no data found...
so I don't know what's going on.... if supposedly the dyn page is receiving the same values in different way, why it doesn't work with the link? -_-

Why is the template not being used when dynamic page called ?

Hi,
I have created a dynamic page and assigned a template to it. When I call the dynamic page using the 'show' procedure from a form, I do not see the template.
Why is the template not being used ? How can I get the template working when I call the dynamic page ?
I even tried to show the page from the dynamic page's manage components tab and there is same problem. Template is not being used.
thanks,
Mainak

You can alter the generated package body to include the following function in the header and footer sections.
Header:
PORTAL.wwv_headings.show_header(
p_template => 'PUBLIC.TEMPLATE_3',
p_heading => 'Dynamic Page',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help',
p_about_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.about');
Footer:
PORTAL.wwv_headings.show_footer(
p_template => 'PUBLIC.TEMPLATE_3',
p_help_link => 'PORTAL_DEMO.EXAMPLE_DYNAMIC_PAGE.help');
where
<PORTAL_DEMO> indicates application schema
<PORTAL> indicates the name of the portal (normally this will be portal30 by default).

How to use Custom Search in Dynamic Page or HTML Portlet ?

Gurus,
1. I have a tab called My Space in the portal web site, where user gets a personalized view of the content.
2. I am using custom attributes and custom item types. I have a custom attribute called 'Location', which is a attribute of custom item types.
3. I have 2 pages - News and Events.
4. All the content in News and Events page is tagged by the attribute 'Location'.
5. The requirement is to let the user search the News and Events by Location.
6. To achieve this I used the Custom Search portlet and the user can select the attribute Location and see the resultant News and Event items by location in the Search portlet.
7. The requirement is to present the News items and Event items in separate regions on the page and show only the first 5 News and Event items in the result and show a More link which would guide the user to rest of the News and Event items.
8. Eventually there may be more content other than News and Events tagged by location. If so, the requirement is to create a new region and display the new content.
9. How would I do this using custom search ? I was thinking if there is anyway I could use the custom search api (where can i find it ?) in the HTML portlet or Dynamic page and submit the result to IFRAMES in each region and show the output ?
Pls advise.
Thanx a bunch.

I would suggest that you use two custom search portlets; one for the news items and one for the events items. Switch the custom search portlets to "AutoQuery" mode and add the relevant criteria. On the results display tab of the the "edit defaults" screen, choose to show just 5 items.
To add a link to show the user mode results, I'd create two new pages that have just a single custom search portlet on it that is customised to show more of the results and maybe has the pagination links enabled.
Then I'd add two "Page Link" items underneath the two news and events portlets on the first page in an item region.
I'm sure there are other ways of doing this as well. Hope that helps to get you started.

Caching in Dynamic Pages

Hi,
I have created a dynamic page(HTML) and published it as a portlet. I have included a call to display an image(say xyz.jpg) in the code. I have also published this dynamic page as a portlet and use it in a portal page. When I view the page it shows the image. When I change the underlying image(xyz.jpg), the new image(please note that that the images are different but the path and file name are the same) is not showing up in the portal page. Instead, the old image file is displayed. I have given Don't cache for the portal page. I also tried clearing cache for the page group, portal page and the dynamic page and it still displays the old image and not the new one. Is there a way to clear cache dynamically?
Thanks,
Manikandan Vembu

Hi,
This is a known issue with the way Wordpress generates the URLs to included content:http://forums.adobe.com/message/4774943
Wordpress generates absolute URLs to content rather than relative URLs, so the current workaround is to either use relative URLs or, if that's not possible, modify the wordpress configuration to use the IP address instead of localhost.
Hope this helps,
Mark

Obtaining form parameters in a dynamic page

Hi
It is possible of course to create a form on a dynamic page and have a user provide input. But how can the user input be retrieved, if the user input is sent to the same page or to another Portal dynamic page? As a Portal dynamic page can only contain html and pl/sql between the <oracle> tags, it looks like there is no programmatic way (such as with perl or java) to obtain the information from the form and put it in one or more variables.
Is there a way to obtain the data from forms using pl/sql in a dynamic page? A code example would be most helpful.
Thanks very much.
Hugo

You can do it using two dyns or one dyn.
Using one dyn:
Define a parameter :p1 and let a default value for it(e.g. 1).
Construct a form that submits to the same dyn
begin
declare
v_p1 varchar2(100) := :p1;
begin
htp.p('<form name="example" action="" method="post">
<input type="text" name="p1" value="'||v_p1||'">
<input type="submit">
</form>');
end;
When you submit it to same page you will be able to see your new parameter value. If you want to use two dyns then submit it to second dyn.

Missing Dynamic Pages and SEO

Similar Messages

Maybe you are looking for