Missing E1KNVLM segment in DEBMDM IDOC TYPE
Dear Experts,
When we run mdmc transaction to create idocs for customer master data,
The debmdm idocs is geeting created with out E1KNVLM segment.
We need to retrive LICNR from the E1KNVLM, we are on ECC5.0,
Appreciate your valuable help.
Thanks and Regards.
Sravya.
Hi,
Check BD79( Creation of Rule) , is there any rule cretaed for this particulat segment .
At the same time check BD56 for any segments fileterd.
Revrt back if any issues,
regards,
Naveen
Similar Messages
-
TAX ASSESSMENT BASIS MISSING IN SEGMENT E1EDK04 FOR IDOC INVOIC
Hello,
Tax assesment basis is missing in segment E1EDK04 for IDOC INVOIC. In EDI messages,Tax assesment basis has to be sent in TAX segment together with VAT rate. When there is only one VAT rate this is not a problem as tax assessment basis is the total net amount (And we have it in the IDOC). On the other hand when there is more than one VAT rate in the invoice, we don't have in the IDOC the Tax assesment basis of each VAT rate.
Did someone experience this issue ? How did you handle it ?
Regards.
Eric.Dear Eric
The latest pack available now for these components are (for PI 7.1)
SAP BASIS 7.11 support package 6
SAP HR 6.04 with Support Package 44
If you are in PI 7.0 then I suggest you download the latest patch from marketplace.
Sourabh -
Custom segments to basic IDOC type without extension
Hi,
Is it possible that an IDOC has custom segments which are getting populated and the basic type does not have any custom segments.
How should we find from where the custom segments are getting populated and displayed?
Regards,
SubhashiniHello,
Lets say in DELVRY05 Idoc Type, we have a Segment Called E1EDL20 and since this is a Standard SAP Provided Basic Type, it will not have any Custom Segments ( Z-Segments). Now, If I want some additional Information to be populated as part of a Custom Segment, what I would do is to Create an IDoc Extension ZDELVRY05 with reference to the Basic Type DELVRY05 and Create a Custom Segment Z1EDL20 (Per Say) in which I'll populate the Custom Data Fields using an Exit. So, unless we create an IDoc Extension for a Basic Type, the Standard SAP Basic Type will not have any Custom Segments-Fields (Z-Segments).
Thanks,
Venkata Phani Prasad K -
Hi,
i need to know the table which can be used to identify all the segments an idoc types..
Rgds,
Harikrishna Indugu.Hi,
Use transaction WE30 to see what are the segments involved in basic types and use WE60 to see what are the segments and fields are involved in particular basic type. You can use the transaction SE11 to see what are the fields are involved in the particular Segment.
Thanks,
Asit Purbey. -
Idoc segment version in idoc type
hi,
we have just upgraded our R/3 system from 4.6c to SAP ECC 6.0. We then tried to send idocs to SAP XI 3.0 SP 20. However the idocs failed due to wrong segment version of idoc. It did not match the loaded metadata in XI. I know that in WE20 you can control the segment version used to send to XI. In the communication channel in XI you can also set the segment version.
So my question is: Is the correct way to handle sytems requiring diffenrent verions to import the newest metadat in idx2 and then control the versions asper the above paragraph?
Any comments are apreciated.
kr RasmusHi,
for sending IDocs to XI no adapter is necessary. It should be enough to reload the metadata in idx2:
http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/frameset.htm
Regards
Patrick -
Segment Display in IDOC Type MBGMCR02
Hi,
I am creating a goods movement and an IDOC gets created. But when I see the IDOC with WE02 not all segments are displayed. What should be done to see a field ITEM_TEXT in the segment?
Thanks & Regards,
YJR.
Message was edited by: YJRHi,
Yeah that is fine but now the problem is I have created a conversion Rule where I use the BATCH as the imput and I would retrieve the SIZE and this value is supposed to be populated in ITEM_TEXT and this creation of conversion Rule is done and it works. But when I try to see it in WE02 the field ITEM_TEXT itself is not visible.
How should this be handled to see the field ITEM_TEXT in the first place itself.
Thanks & Regards,
YJR. -
Idoc segment for shpmnt notification for idoc type shpmnt02
Hi gurus,
I have to find the idoc segment for shipment notification,idoc type which we are going to use is shpmnt02 or shpmnt01,Can any one of you please tell me the idoc segments for this idoc type with fields and table name?.Thanks in advance.Hi Nagarathinam
You can use transaction WE60 for documentation on IDOCs
Best regards,
Chris -
Adding new segment to IDoc type DELVRY03
Hello everybody!
I just got a request to add two new segments to an Idoc (type DELVRY03) under the segment E1EDL24. (E1EDL43 and E1EDL41).
They told me to use the userexit EXIT_SAPLV55K_004 to add the new segments using the table IDOC_CONTROL since it is standard. But the problem is that the changes are not been saved.
I realised that by the time that this exit is called the standard already stored the information on EDID4.
I appreciate any help!
Thanks in advance!Hi Kumar,
If we change EDBAS table data and modify my idoc type by adding segment.
after completing process have to move my object to production.
Hope it ll through an error... because it will check with table data also for validation.
could you please justify your answer kumar?
Thanks for your helpful information.
Regards,
BALAJI. -
How to add a custom segment in standard IDoc?
Hi,
I want to add a custom segment in stanard IDoc type (eg. MATMAS). I don't want to go for extended idoc (copying stanard idoc into zidoc and adding custom segment).
Please tell me.Hello
Transaction BD10 uses fm MASTERIDOC_CREATE_REQ_MATMAS which in turn uses MASTERIDOC_CREATE_MATMAS to create and distribute material master IDocs.
Fm MASTERIDOC_CREATE_MATMAS belongs to function group MV01 in package MGV. Here you will find the user-exit function group XMGV.
Perhaps EXIT_SAPLMV01_002 might be useful for you.
Regards
Uwe -
Why message type if idoc type or idoc is already there.
Experts.
this has been posted several times and i gone through so many threads but stil some confusion . So anyone can tell in simple terms what is the difference and why sap has given this two instead of one.
Diff. with IDOC type
An IDoc type specifies the structure of the data.
A message type specifies the meaning of the data
*****from the above statements , by seeing the name of the idoc type ex matmas01 also we ca n say that it is used for material data, then why message type matmas needed?Hi,
Idoc type means combination of segements
Message type means Combination of idoc type
or
Message type mean combination of Idoc type + Extension idoc type( Custom segments added to idoc type)..
Example:-
If you want to fill the data to custom segment which is available at exension idoc ...
then first check the message type then check basic idoc type then check it contains exetension idoc type ..then fill the segment
Generally the communication occurs between system through message type...
Prabhudas -
Adding fields to custom idoc type
Hi,
i have a query regarding adding fields to custom idoc type.
To add fields to custom idoc type we are trying to cancel the release from we30, but we are facing error that 'The release of basis type cannot be reset'
When we are trying to cancel release from we31we are facing error 'Error while ressting release of segment z type'.
Kindly suggest the solution to add fields in basic idoc type.
Thanks & regards,
Farheen.Reason that you are getting these errors is that you cannot cancel
the release of an extension made in previous version . Instead you have to create a new extension.
1.It is not possible to change a segment definition which is released in a
lower release.
2.You must create a new segment definition for the new release e.g. 620 with a new segment
field with the appropriate length.
In transaction WE20, outbound parameters, you can specify
the "segment release in IDoc type" for the communication.
Please read the F1 help of this field for further information.
3.For your own segments you can define a new version of the segment
tcode WE31 -> Add Version
Thanks! -
Nhi guru's cross apps what is basic type,idoc type , message type
nhi guru's cross apps what is basic type,idoc type , message type plz help me i am larning how to work on idocs using ale explain me like realtime environment
Hi,
Hi,
i got this data from sdn .plz go thru might be helpful
IDOC is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
how to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
For creating a IDOC u need to Create a segment type in WE31.The internal table in which we store the data to be passed to the IDOc thos fielda are defined in fieldname and data element.Save and release the segment.
Create IDOC type in WE30. Give min and max types. Mark it as mandatory.
Create Message type in WE81.Assign it to a change request and save it.
Link this message type with IDOC type in WE82.
Then start your coding and pass the details of Data and control records.
Just have a look at these links:
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
Creation of IDOC:
idoc creation
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=creation%20of%20idoc&cat=sdn_all&start=11
ALE/ IDOChttp://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
i think this will helps u
<b>reward is usefull</b> -
New Header Segment in Extension IDoc
Hi,
I want to create a new header segment in Extension IDoc.
I am not able to create. I want to extend the Basic IDoc DESADV01 by adding a new header segment (Batch numbers, ID's and with time stamp).
The remaining segments should be under this segment only.
Is it possible that or shall I create Custom IDoc?
Thanks in advance.Hi,
You can not create new header segment when extending IDoc type DESADV01.
System only allows you to insert as child segment instead.
If you still want to create new header segment, then you need to create a custom IDoc.
Regards,
Ferry Lianto -
Segment Hierarchy - DEBMAS IDOC Creation
Hi All,
I am able to create a DEBMAS Idoc successfully but the segment hierarchy does not seem to be right.
Can somebody tell me what fields are to be filled to create the correct segment hierarchy or point me to a standard program where DEBMAS idoc segments are filled?
Thanks,
MeghnaHi,
there is no distribution of customer hierarchy.
Therefore you will not find a proper segment in DEBMAS* idocs types
You may look at [note 548716|https://service.sap.com/sap/support/notes/548716].
BR
Alain -
Custom IDoc Type missing segment parent/child relationships
Hi.
I copied the standard ORDERS05 IDoc type to a custom type and cut out quite a few segments. My new IDoc type is setup with parent/child segment relationships, similar to many of the original relationships in ORDERS05.
When I use the standard FM IDOC_OUTPUT_ORDRSP to generate an IDoc, it's not creating with parent/child segment relationships. It's placing the children at the same level as the parent.
Anyone know what I'm doing wrong?
Thanks!
Calfigured out the problem. was missing a required segment used to establish the parent/child relationship.
Maybe you are looking for
-
When i try and video chat it will always give me this error code...
For the past week i been trying to ichat with friends and family but it has not been working. I've been getting this error code below... Date/Time: 2010-09-29 22:03:14.786 -0700 OS Version: 10.5.8 (Build 9L31a) Report Version: 4 iChat Connection Log:
-
Windows Server 2008 R2 BSOD Various Messages
Hello All, I've got a Windows Server 2008 R2 that's bluescreened twice in a month. Both times different stop error code. Running on a HP DL360 in Proxmox virtual environment. Below are the two dump outputs: Microsoft (R) Windows Debugger Version 6.12
-
Help using multiple ComboBoxes
I am working on a JSP to add a new Property in my application. On the insert page the user must select an existing County and Township in order to add their new entry. I use the following code to implement the County ComboBox... RowEditor.useComboBox
-
Is it possible to update (=change) control block items in a query only form ?
From Form.A we call Form.B with the parameter query_mode = query_only. This works fine. But in Form.B we have a non table block (=control block) with an poplist item. Allthough in query_only mode we like to change (it's not a real update cause it's c
-
Cannot save a php file in dreamweaver:access denied
I am taking a course in PHP. I am using the environment download XAMPP, and working directly in dreamweaver. My very first project is the traditional Hello World script, a simple echo command... When I go to save the file, Dreamweaver gives me an err