Missing Easy Setup File 1080i50

Hi guys
Just upgraded to Sony HDV camera (HVR-A1E) PAL (UK). Pop into FCP5.x easy setup menu for capture and only settings are for 1080i60. Where is the 1080i50 gone? Cannot capture more than a few seconds of HD before dropped frame rate window pops up. Can capture HDV in iMovie, but when you try to import into FCP it gets upset! Using iMacG5 2GHz with 1Gb RAM.
Any thoughts, or anyone who can put me in touch with the missing file or instructions on how to set it all up manually would be GREAT!
Cheers
Paul

Just gives me a new list to choose from when I start program. The list contains only one version of HDV which is the 1080i60! So that didn't help. Any other ideas!
Cheers

Similar Messages

Error: You must have at least 1 Easy Setup File?

I just upgraded from FCE 1.0.1 to FCE HD v3.0. I have Quicktime 7.4.5 & OS X 10.4.11
When I launch, it takes forever because it's trying to load all my audio plugins into it and then at the end of that I get this error message:
Unable to start Final Cut Express HD. You must have at least 1 Easy Setup file. Please re-install Final Cut Express HD and try again.
Since it takes so long to install and I've already done it twice now...to no avail mind you...I was wondering if a guru or enlightened person would fill me in with what's going on and what I might do about it?

You may as well get rid of everything as we don't know where the problem lies.
This says FCE 2 but it is for FCE 1.0.1 as well. Remember many of the FCE 3.0 and FCE 1.0.1 files will be the same/shared.
http://docs.info.apple.com/article.html?artnum=93690
When you reinstall, do not install FCE 1.0.1.
Simply install FCE 3.0 and you will be asked at some point for the FCE 1.0.1 serial number as well.

Need easy setup file?

I have just installed FCE on a new harddrive. When I open the application I get the following message:
Unable to start Final Cut Express HD. You must have at least 1 Easy Setup file. Please re-install Final Cut Express HD and try again.
I've tried re-installing about a bajillion times, with multiple install disks and licenses. What up with this??

I am having the same exact problem. Were you able to resolve this problem? (problem of Final Cut Express not starting up because it can not find a setup file.)

I downloaded Adobe CS5.5 Master Suite: Missing Setup File

I don't know what to do. My school issued free issue (legally) of Adobe CS5.5 Master collection. I downloaded the whole thing through my Adobe Downloader, but now it is saying that I am missing the setup file. What can I do?

It seems that the package might be corrupt due to which you are getting the missing file error.
Consider re-downloading the package.
You can download from the direct download links available at : http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
But make sure you follow the important steps mentioned on the page before initiating the download.

I try to open Final Cut Express it asks to choose an Easy Setup. Help!

After recently insatlling Final Cut Version 2.0.2, I tryed to open the application
but it asked to choose an Easy Setup and re-install. I already deleted the
program but i have no idea what an Easy Setup is or what to do next! Someone please HELP ME!!!
Mac G5 Mac OS X (10.4.3)
Mac G5 Mac OS X (10.4.3)

to allow final cut express hd (3.01) to run as "any user" (in our case we are having users login with AD integration) and NOT have the issue of "At least 1 easy setup file..."
do the following:
login as admin
make "system" owner the folder (and all contained):
/Library/Application Support/Final Cut Express Support/Custom Settings
resolves the issue. it appears when FCE HD is installed as admin and run for the first time, the Custom Settings folder is created with the Easy Setup file installed - BUT it is owned by "admin". when anyone (other than admin - or an admin) logs in, they cannot access that folder and therefor cannot get to the easy setup file.
i tested this and it works. for any OS X users with a lab, FCE HD out there, this is the fix. hope it keeps a few people from pulling their hair out like me.
g4 powerbook 12" Mac OS X (10.4.4)

Some easy setup are missing from FCE.

Hi, Im teaching FCE, on some computers I have all the easy setup I need, and on some computers I dont (for example, I miss the Apple intermediate codec 720p 25)... is there a way to install addition easy setup?
many thanks

Thanks, I'll try this on sunday when I will be there

I have converted m2ts files to .mov to edit in FCE (4.0.1) When I drag the clips into the timeline they need rendering, as much as a minute for a 30 sec. clip. Is this normal? I am using OS 10 . My easy setup is apple intermediate codec, 720p30. Any help

I have converted m2ts files to .mov in streamclip, for editing in fce 4.0.1. When I drag them into the fce timeline the clips need rendering, as much as a minute for a 30 second clip. Is this normal? My OS is 10.6.8. My easy setup in fce is apple intermediate codec 720p30. Any advice to avoid the rendereng would be helpful. Ann

To what codec, frame size & frame rate did you convert the files in Streamclip?
If it isn't AIC 720p30, you'll need to render.
x

Editing 16:9 mp4 files from .mod ....what easy setup to use?

Hi everybody....I am trying to get started on an edit of some 16:9 mp4 files that I created from .mod files using MPEG Streamclip. I can now import the files into FCP and chose DV NTSC Anamorphic as the easy setup, and am having two problems for starters:
1. The canvas window is showing me the edit as a 4:3 letterbox
2. When I try to render clips, I get the message: "Render Error: Insufficient Disk space. Free up space with render manager and retry?" ....but even if I try to gain space by using that manager there is nothing in the list to remove anyway.... and so I am unable to render clips.
Any suggestions?

#1 - FCP doesn't edit mp4 files. That is not an editing codec. Convert to DV/NTSC using MPEG STREAMCLIP.
#2 - if you drop a clip into the timeline and have to render, that is a BIG CLUE that something is wrong. You should never have to render just a base clip if everything is setup right. That means converting the footage to DV/NTSC, and using the same settings in FCP.
#3 - Where is your media stored? And what type of SCRATCH DISK do you have? do no use your system drive to store footage or render to.
Shane

Easy Setup For Panasonic AG-HMC150 Files?

I just got my new Panasonic AG-HMC150, and shot some sample footage at 720p/60. I had no problems getting the clips into FCP using Log & Transfer, and they look fine when playing them in the viewer, or from the timeline.
I have a Matrox MXO, and the clips also play great on my 2nd Cinema Display that runs off of the Matrox; and, I have a small Sony 4:3 CRT monitor, that shows the clips properly letterboxed, and they play fine on that too. I've even exported the clips to Compressor, and burned a DVD in DVDSP, which looks great. Audio is fine, in sync, etc.
The only problem is in the FCP canvas window; the lips will flicker a little or a lot, depending on the View Menu's video playback setting; using MXO DVCPRO 1280x720/59.94 causes a lot of flicker, while choosing MXO Uncompressed 1280x720/59.94 causes a little .
I'm not sure if my Easy Setup is correct; I've chosen the MXO Apple Pro Res 720p/59.94 sequence setting, but I'm not sure what to do for Capture or Device Control settings; I wouldn't think that they would matter.
I think the problem is with the Video Playback setting; I've chosen several of the MXO settings, and they all play fine on my Matrox monitor, but I can't find one that will smooth out playback in the canvas. Or, since everything else seems to work fine, should I even be worrying about this?
I'm making the switch from capturing tapes, and I actually expected a lot more trouble than I'm having; but solving this tiny glitch would be great. I'm looking forward to getting familiar with this camera and using it for some upcoming events.
Any suggestions on the proper Easy Setup settings for files from this camera, and in particular, a good View/Video Playback setting? Thanks in advance.

Click on one of the ingest camera files in the FCP Browser. Once it is selected, type Command + 9 to see the properties for the clip. Either report those properties here or take a screen shot of the item properties and post that here.
Next, click anywhere in your timeline, then type Command + 0 {zero} to see your Sequence Settings. Either report those settings here or take a screen shot of your Sequence Settings and post that screen shot here.
MtD

Best "Easy Setup" for AVCHD .mts files

I'm on a MacBook Pro in 10.5.8 with FCP 7, all footage is shot by a Canon HF S100 at 1920x1080 60i. Is there a best way to set up the Easy Setup for the AVCHD files?
I currently have it as:
Format: (all)
Rate: (all rates)
Use: Custom Setup
Sequence Preset: HDV 1080i60
Capture Preset: HDV Apple ProRes 422
Device Control: non-controllable device
Video Playback: none
Audio Playback: Default.
Is there a better way to do it than this?
Thanks,
Dave

Yup,
It costs but it's supposed to be very worth it on saved time and trouble.
http://www.clipwrap.com
From the website:
rewraps - doesn't transcode
ClipWrap rewraps the video samples from your existing m2t, mts, m2ts files without re-encoding them. This means blazingly fast convert speeds and no image degradation.
Transcodes too!
Need your files in ProRes, AIC, DNxHD or DVCProHD? ClipWrap can seamlessly convert your files. Don't worry about frame size changes, gamma shifts, or any of the other problems resulting from mismatched settings - ClipWrap chooses all those based on the source file's format.
Automatic format detection
ClipWrap speaks your camera's language so you don't have to. It automatically parses the file's format and chooses the proper output format, so there's no hassle trying to determine the proper settings (frame rate, image size, gamma levels, etc).
Full timecode support
Timecode is recreated in the new QuickTime movie, so you can recapture from tape later if necessary.
Supports HDV and AVCHD formats
Now you're not limited to specific HDV or AVCHD cameras, you can rest assured your files will be compatible with FCP when it comes time to edit.

Easy Setup to Import YouTube files

Hi--
I'm new to FCE4, having been studying Weynand's "FCE4: Movie Making for Everyone". In trying to import material to practice on (I'm not capturing from a camera), I'm running into conversion problems making sample subclips and trying to play them in the timeline. Is there a standard setting I should be using in Easy Setup? Or do I have to use the utility MPEG Streamclip that I've heard about? And are there any tips and tricks I should know about that?
Thanks in advance. I hope, since I'm a newbie, that I'm not bringing up something that's been done to death. I went back several months and didn't find anything super-relevant. Much obliged.
later,
John

Thank you for your response, Ian. I know that you are correct about YouTube downloads not being an ideal way to learn FCE4. But I am trying to create soundtracks (with original music, and perhaps dialogue and sfx) for pre-existing films, many of them silent, or replacing existing soundtracks. That would involve editing YouTube "footage." I don't shoot video myself.
So I'm assuming that Streamclip can output H.264 directly to the Apple Intermediate Codec? Also, is Streamclip "safe" to use? I am a little jumpy on the subject because my iMac got so completely corrupted last year that I had to start over, at great expense. But I do see that there are tutorials from a couple years ago right on this forum, so I probably don't have to worry, right??
(I'm such a wuss...)
Thanks so much, Ian!
later,
John

TP 600X Always Boots to Easy-Setup

Hello...
It's a 600X 2646-D3U. BIOS is BIOS ITET55WW, 11/30/99
I bought it used in 2004 and it has served two kids reasonably well. They've moved on to more current hardware and I'm trying to bring it back to life.
I replaced the 'button' battery, the li-Ion battery and the keyboard. It had/is been running WXP for a few years. But...
No matter what I do, it always boots to the Easy-Setup screen. I've gone through all the options there and confirm/reset the config & boot options.
If I then select 'Restart', it comes back to the Easy-Setup screen. If I just press ctrl+alt+del from the Easy-Setup screen it boots to WXP and the Windows Logon screen.
It's almost like the F1 key is stuck down during power-on. There are no indications that the F1 key is not working correctly.
Any suggestions/help would be appreciated. Thanks.

I believe that a stuck F1 key is about the only one you can have stuck on the keyboard and still be able to boot into Windows. I just duplicated your problem with one of my 600X systems by continuously pressing the F1 key and booting. It goes right into the Easy-Setup menu and then Windows after the CTRL-ALT-DEL, while still holding onto the F1 key. The F1 key is typically used by Windows programs to bring up a Help window. For example, if Firefox (3.5) is running, pressing the F1 key will open a tab at the support page; Internet Explorer opens up a popup Help utility.
You can verify the functioning of all of the keyboard keys using PC Doctor for DOS. The program can be downloaded directly from here:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-495KW2
This program will create a bootable floppy with the diagnostic program. If you prefer to use a CD-R, then I host the same file as an .ISO here:
http://www.kawakami-ca.com/ibm_600x/dgpcdoc.iso
Boot the system with the media and select the 600X from the menu of supported systems. Once the diagnostic is loaded, select the Interactive Tests menu option (using the trackpoint or arrow keys and then pressing Enter) and then the Keyboard test, the Keyboard Keys and finally the 84 key(US/Hebrew) option. That should display a crude map of the keyboard. Pressing any one of the keys will cause the corresponding key on the display to go "reverse video". My guess would be that you won't be able to get any reaction from the F1 key. I was able to completely load the PC Doctor diagnostic and get to this test while keeping the F1 key down the whole time.
The fix would be to try to pry off the keycap of the F1 key and see if there's anything you can do underneath. I was able to get the keycap off by lifting the "back" side of the key toward myself. There's a plastic/rubber dome which should be present. If it's "deflated" then that is the cause of your problem. If it's missing, then there's probably some contamination on the board (i.e., a short) which makes the keyboard think you're pressing the key. It might be possible to replace the dome but you have to glue it down without interfering with the switch contacts. It's probably easier just to get a replacement keyboard.
Ray Kawakami
X22;X24;X31;X41;X41T;X60;X60s;X61s;X300;X301;Z60m;Z61t;Z61p;560Z;600E;600X;T21;T22;T23;T41;R50;A21p;A22p;A31 and A31p
Not a Lenovo employee; just a volunteer helping out here
All personal links to PC-Doctor software removed 8/2012 by mfg request

Settings in easy setup, help me!

Hi, I have a Canon XL H1A shooting 25 frames at 1080i HDV. It's also a PAL camcorder. Whats the best setting in the easy setup of FCE4 to use, i want to retain the highest quality.
Thanks
Phil

Sorry ..... I missed out the Apple Intermediate Codec bit, but you are using the correct one.
Yes, you do get a different capture window with HDV.
If you haven't already seen it this is what the manual says:-
To capture HDV footage to the Apple Intermediate Codec:
1 Click in the Browser to make it active, then choose File > New Bin.
2 Name the bin, then press Enter.
3 Choose File > Capture (or press Command-8).
A Capture dialog appears instead of the Capture window.
4 In the Capture dialog, enter a name for the clip, then click Capture.
The capture preview window appears and the camcorder begins playing back video
from its current position. The status area of the capture preview window displays the
percentage of real time in which the video is being encoded from HDV to the
Apple Intermediate Codec.
5 Press the Esc (Escape) key to stop capturing.
The video playback on the camcorder stops immediately. The capture preview window
may lag behind, displaying where the video is in the encoding process. As these frames
are processed, the status area of the capture preview window displays the percentage
of frames left to process.
Note: Pressing the Esc key a second time stops the encoding process and cancels
the capture.

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

After downloading iTunes, the setup file simply does nothing...

I got a new iPod touch yesterday and when I tried to update my iTunes (which was 7.6) the update would not work. After trying to update multiple times I finally decided to uninstall iTunes so that I could re-install it (and hopefully have it work. This, I soon learned was a big mistake. The download of the iTunes setup file to my desktop worked fine, but when I tried to actually install iTunes, nothing happened. I can click the file, a window pops up saying that the program is from an unknown publisher and asks me if I want to run it anyway. I click yes, and nothing happens. When I try to install iTunes from the apple website, it won't work either. I then get a pop up saying that the program is bot valid and will not install. I have tried everything reccomended on the troubleshooting section and no change. I have windows XP, which is up to date, has vbscript installed and have tried everything that I can think of. Can anyone help me??
please and thank you.

I am afraid I don't know the answer to this. The problem seems to crop up a fair bit, but I haven't seen anyone post a solution.
There is an experiment I have been wanting to try with someone if you are willing. I have been wondering if this could be anything to do with a problem with cryptographic dlls.
Could you try working through *Method 4* in the following link:
http://support.microsoft.com/kb/822798
It is possible that simple re-registering the dlls might help if the process goes through without any error messages.
But it is also a test to check for missing dlls - make a careful note of any error messages that may occur.

Missing Easy Setup File 1080i50

Similar Messages

Maybe you are looking for