Missing Effect after upgrade to 10.0.4

I upgrade to 10.0.4 - went pretty smoothly. When I opened FCPX it 'update' my Events and Projects. Now I have a clip in the time line that has a orange bar along the time frame. When I try to preview I get a red screen and a warning symbol (yellow triangle and "!"). When selecting the project the Information window states "1 Missing Effect - FastNoiseReuction". I'm assuming this filter is not longer available - how come? How do I remove it from that clip? The clip won't render as is, although I can see the clip contents OK in the timeline.

Any Effects which are deletable will appear in the inspector.
Select the clip and press Cmd+4 to open the inspector.
This grab shows the Audio Tab - with no effects.
Andy

Similar Messages

  • Anyone else having trouble with missing ringtones after upgrading to 8.1.1

    Anyone else having trouble with missing ringtones after upgrading to 8.1.1?

    Try resetting the keyboard dictionary
    Settings>General>Reset>Reset Keyboard Dictionary

  • Missing Airdrop after upgrade to Mavericks 10.9.1

    Missing Airdrop after upgrade to Mavericks  ( runing 8 g i5 mac pro)

    Actually, the Evernote extension thing was just a coincidence.
    It seems the real culprit is the firewire mixer connected to the laptop. After a reboot, I often have to shut the mixer off and then turn it back on before things start working properly.
    Chrome is not the only software affected either. So far, I've discovered iTunes and Safari are also basically crippled after a reboot until I turn the mixer off.
    Something is wrong with Maverick's implementation of FireWire, I'm afraid. I've written about cracking and popping noises I get from QuickTime when playing audio over FireWire.
    Something just ain't right.

  • Missing features after upgrade

    I updated my 3GS to 4.0 and lost cell data (though it will show full bars and 3G), as well as MMS. I then got the iPhone 4 and restored from my 3GS backup. Now, I am missing those features as well FaceTime (which isn't even showing up in the phone settings). Anyone know what's going on?
    Most important is obviously that I'm able to access the data network. I'd rather not restore entirely because I'd then lose camera roll, text history, etc.

    Hello, I had the same problem yesterday after upgrading from Windows 8.1 to Windows 10. After searching the web I found this solution (source: http://support.hp.com/us-en/document/c01114052#SelectiveUpdate) which worked for me:      Step 4: Selectively update the imaging device driverIf a webcam driver is recognized after running the scan for new hardware in Device Manager, verify it is the latest version of the driver. note:If there is an HP webcam driver on the product page for your model and OS, use that driver, otherwise use the Microsoft USB Video Device driver.In the Device Manager, under Imaging Devices, expand the list of webcam drivers, right-click the webcam driver, and then select Properties.Figure : Webcam PropertiesMake a note of the existing name of the webcam driver (Example: HP Webcam), as it may change after the update.On the Webcam Properties window, select Update Driver....When prompted, select the option to Browse the computer for desired driver.When prompted, select the Let me pick from a list of device drivers on my computer option.De-select the Show compatible hardware checkbox, select Microsoft in the Manufacturer pane, select USB Video Device in the Model pane, and then click Next to install the desired webcam driver.Allow the installation of the USB Video Device, and then click Close.View the Imaging devices option in the Device Manager to verify the presence of a webcam driver.   Hope this works for you too. Regards,

  • Organizer 10 missing thumbnails after upgrade

    After upgrading from Elements 7 to 10, I'm missing 1400 thumbnails in Organizer 10 that are still present in Organizer 7. Is there some way to find the missing images and get them viewable in Organizer 10? Thank you.

    Well, I figured how to fix the problem manually, fairly quickly. Clicked on Display, then folder location. In the My Pictures section, it was was easy to identify the 20-30 folders (out of about 100) whose images had not been imported into organizer. Right clicked each one, one at a a time, and clicked to import images. Voila.  Took about 10 minutes, and all the images are now in Organizer 10. Thanks for the ideas to help me.

  • Missing contacts after upgrading to Snow Leopard

    After upgrading from OSX to Snow Leopard half of my contacts are missing is there anywhere they might be I have not backed them up.

    My contacts in address book.

  • Missing Photos after Upgrading to 1.5.3

    I wanted to ask anyone if they've had the problem I've had after upgrading to ver. 1.5.3. Once this upgrade was done, and I opened Aperture, I noticed that lots of photos seems to be missing. Seemed to be from July of 2006 to current. These photos were stored in several projects that I created simply listed as months (ie. 0701-Photos) meaning Jan of 2007 photos, etc.
    These projects and their photos are not to be seen now. I'm hoping there're on my hard drive somewhere. I've tried to rebuild library but no luck.
    If anyone has any ideas... Please! Thanks!
    PowerMac G5, MacBook Pro 15   Mac OS X (10.4.9)   30" Apple Cin. display

    If you have an updated Vault try recovering from there.
    If not, in the Finder ctrl+click on Aperture's Library and 'show package contents'. In there you'll see the projects. Ctrl+click on one with missing images and 'show package contents' again. If you can see the masters there they should be recovered by rebuilding the Library.
    Check also that you don't have anything written on the searching box on the top right of the browser, by default should say 'Unrated or Better'. You might have written something and it's showing the filtered results.

  • Missing drivers after upgrade Hard drive of X31(2672)

    Hi,
    After upgrade my X31 hard drive(the old one is dying), my USB is not working anymore. Through PC doctor, I found both the drivers of Network Controller(code 28) and  Universal Serial Bus controllers at USB/RootHUB (code 39)are missing. I don't have recovery CD. Do you know how to fix it?! 
    Thanks,
    Yang

    Install ThinkVantage System Update and let it pull down the drivers and apps for you machine and OS.  Install the Win 7 version.
    ThinkVantage System Update
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Missing Playlists after upgrade

    All my playlists are gone (but library intact) after upgrading to 10. What can I do?

    Try restoring the iPod then move the yoga thing to you movie library and then COPY it to the playlist but so its still in the videos section.

  • Can anyone help me with my missing addresses after upgrade?

    I have posted two questions as to why all my addresses disappeared after upgrading from OS 3.9 to 4.10 but there have been no responses. Is this the ONLY avenue to get support because, if so, it is definitely the Emperors New Support Line. I am hoping someone will help me find my list of addresses if they are still in my G4. Or even tell me they are gone forever. Any response would be good. Thanks.

    Hello,
    What type of installation of Tiger did you choose when doing this "upgrade"?
    Use Spotlight to search for any folders named AddressBook. The one the AB application is accessing is found in the Applications Support folder in the Library of your Home folder, but perhaps there is more than one onboard?
    In Home/Library/Applications Support/AddressBook what are the files present, and what are their various dates last modified?
    Ernie

  • Missing slideshows after upgrade to iPhoto'11

    I think I have the same problem as dyanefromshelton just posted:  After upgrading from iPhoto'08 to iPhoto'11 I don't seem to have my slideshows.  They are all listed under slideshows, but there appears to be no content in them when I try to play them. Are they lost due to incompatibility, or is there some way to get them back?

    I just closed iPhoto and opened it again, and now everything is OK!

  • [SOLVED] VLC Missing codecs after upgrade

    After upgrading VLC to the latest version, it is unable to play several videos with codecs such as DIV3 and mp4a. After some digging I found this:
    [tess@misaki ~]$ vlc -vvv --list |grep avcodec
    VLC media player 1.1.2 The Luggage (revision exported)
    [0x1ca4120] main libvlc debug: VLC media player - 1.1.2 The Luggage
    [0x1ca4120] main libvlc debug: Copyright © 1996-2010 the VideoLAN team
    [0x1ca4120] main libvlc debug: revision exported
    [0x1ca4120] main libvlc debug: configured with ./configure '--prefix=/usr' '--disable-rpath' '--enable-faad' '--enable-v4l' '--enable-snapshot' '--enable-dbus-control' '--enable-nls' '--enable-lirc' '--enable-pvr' '--enable-ncurses' '--enable-mozilla' '--with-live555-tree=/usr/lib/live' '--enable-realrtsp' 'CFLAGS=-march=x86-64 -mtune=generic -O2 -pipe' 'LDFLAGS=-Wl,--hash-style=gnu -Wl,--as-needed' 'CXXFLAGS=-march=x86-64 -mtune=generic -O2 -pipe' 'PKG_CONFIG_PATH=/usr/lib/pkgconfig'
    [0x1ca4120] main libvlc debug: translation test: code is "C"
    [0x1ca4120] main libvlc debug: checking plugin modules
    [0x1ca4120] main libvlc debug: loading plugins cache file /usr/lib/vlc/plugins/plugins-04081e-7e8.dat
    [0x1ca4120] main libvlc debug: recursively browsing `/usr/lib/vlc/plugins'
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/meta_engine/libtaglib_plugin.so' (/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/vlc/plugins/meta_engine/libtaglib_plugin.so))
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/demux/libmod_plugin.so' (libmodplug.so.1: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/demux/libavformat_plugin.so' (libx264.so.104: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/demux/libts_plugin.so' (libdvbpsi.so.6: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/demux/libmkv_plugin.so' (libmatroska.so.2: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/mux/libmux_ts_plugin.so' (libdvbpsi.so.6: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/codec/libx264_plugin.so' (libx264.so.104: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/codec/libavcodec_plugin.so' (libx264.so.104: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libdvb_plugin.so' (libdvbpsi.so.6: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libaccess_dv_plugin.so' (libavc1394.so.0: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libaccess_avio_plugin.so' (libx264.so.104: cannot open shared object file: No such file or directory)
    [0x1ca4120] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/gui/libskins2_plugin.so' (/usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/vlc/plugins/gui/libskins2_plugin.so))
    [0x1ca4120] main libvlc debug: saving plugins cache /usr/lib/vlc/plugins/plugins-04081e-7e8.dat
    [0x1ca4120] main libvlc debug: module bank initialized (376 modules)
    So how do I fix this? I have been digging around for the codecs in pacman but I'm not having any luck.
    Help?
    Last edited by rashfeather (2010-08-14 12:54:00)

    rashfeather wrote:Edit: Is it generally good practice to run pacman -Syu instead of upgrading individual packages?
    Yep. Updating individual packages can lead to breakage if they were built against newer versions of other packages. This could be avoided by extensive use of versioned dependendencies but Arch assumes that the user is using the latest versions of all packages. In general, if you have to update the database to install a package because the version listed in the current database is no longer available, update the system before you install anything new to ensure compatibility (as far as possible).
    In your case, if you had 488 outdated packages and only wanted to update vlc, then the rolling-release model might not be ideal for your situation. There is no set rule of how often you should update and often you don't actually need to if everything is working, but whenever the "how often do you update" thread comes up, it seems that most people update once a day. Doing so also means that there are fewer things that can go wrong at once.

  • Missing drivers after upgrade to Win 7 in HP pavilion dv9500

     I upgraded my laptop to Windows 7 32 bit and everything works except from 2 base system devices listed in device manager that need work. What should I do?

    I have the same problem with you but I found out once you upgrade your pc to windows 7 there's always an issue. You'll try calling HP Tech, and they will refer you to PC techinician nearest to you because they said there's something wrong with you HD blah blah or your sound card is gone...need a new one. Well I nearly believe them until I stumbled what's causing my problem and I fixed it myself. Now I have no problem with my sounds missing or audio device missing. My Laptop has voice now non-stop.
    The problem that cause wasn't about the hard drive or the sound card but it is about the CONFIGURATION OF YOUR PARENTAL ACCOUNT CONTROL IN WHERE YOUR AUDIO SOUNDS HAS TO BE USE. AFTER I SET MINE TO WHAT IS SUPPOSED TO BE THE RIGHT OPTION, SINCE THEN I HAVE NO MORE PROBLEMS ABOUT MY SOUNDS OR AUDIO DEVICE MISSING OR NO AUDIO DEVICE INSTALLED.
    SOLUTION; Click Start/Control Panel/User Accounts and Family Satefy. Click Parental Control. In the box at the LEFT SIDE you will see GAMING RATING SYSTEMS. Click Gaming Rating System and click administrator box Yes(if come out). In the box you will see some LOGO ICONS for you to choose in which gaming rating you want to use your sounds. This is where you must configure your computer what rating is compatible to use to run sounds in your Windows 7 from Windows Vista or Xp.
    The previous option in my Laptop was in the 3rd option ESRB. Then I move it to the 2nd option that the LOGO is written in Chinese Language( Computer Software Rating Regulation). I click OK and then Restart. Since then I have no missing audio or missing sounds problems. 
    I hope that helps.

  • Can't open After Effects after upgrading to Yosemite

    I recently updated my macbook pro to yosemite and after the upgrade after effects now has a circle with a line through it and won't let me open. I get the error that I can't use this version of the application with this version of os x. Any help would be greatly appreciated since I'm seeing that it should work fine.
    I have Adobe After Effects CS6 11.0 and am running it on a macbook pro late 2011 with i7 and 8gb of ram.

    Install the After Effects CS6 (11.0.4) update:
    http://adobe.ly/DVA_updates

  • Missing files after upgrading to lr 2.3

    lr 1.4 starting acting odd a couple days ago when certain photos in certain folders when clicked on and viewed in the filmstrip mode suddently changed right in front of me. they were cting like the syn mode was stuck in +20 wb. as soon as the change occured on each file there appeared an error message above it with 3 straight lines and an exclamation mark saying metadata had been charged. so i figured it was finally time to upgrade to 2.3 which i did by trying the trial issue just to see if the files showed up normal or appeared corrupted or changed too. well it got worse when the new catalog automatically loaded and of my 25,000 images nearly all say photo missing. this wouldn't be a problem if this was a couple but it is most of the catalog. i did a back up before the devil took over my machine and started changing the metadata. so i have that if i knew what to do with that info.
    I was hold on the phone to tech support from 6-7 last night and have been on hold with tech support since 10 am and it is now 1:30 on the west coast. I can't do much of any of my work as all my files, editing, printing are tied to LR. i got desperate and even tried creating a new catalog but when i clicked the photos on my tree in explorer to add them to a new catalog lr couldn't see them. i have avg software and no virus, i can see my photos in explorer, adobe cs3 and in bridge. i haven't changed the placement of the folders on my computer, any changes i have done have been within lr and they were mainly adding new meta tags which also didn't come thru and renaming some of the files from 2009-3-9 to adding pt scenery etc.
    i'm totally frustrated, i have spent so much time on hold i had to run out and spend $40 to buy a land phone so i could sit here without my phone battery dying. any suggestions while i sit here? i'm afraid to hang up on cs as i have been disconnected twice and they must have some sort of order in answering however at this point in time i can't figure it out.

    i have been so busy trying to find the files i just went back to some older files and found that the same rendering problem still exists. i open a folder click on a photo in the filmstrip and it automatically changes before my eyes, for a second i see a message that says rendering setting changed. i didn't touch a thing it just does it. i have gone into the syn and checked that everything is unchecked and it still happens. is there some other place for the rendering setting to be changed? it can't be a preference that i've accidently changed?
    For those photos that are changing, I can think of two things that it may be:
    If images are edited outside of Lightroom (in Camera Raw, etc), that can change the metadata (or Develop settings) of the file.  When you view the file next time in Lightroom, the new conflicting settings are applied to that photo.
    When raw files are imported into Lightroom, they initially appear with the embedded camera-generated JPEG preview. After that, Lightroom generates its own previews which typically look different than the original ones.
    Not sure if it's either one of those.
    so you think i can just click on your link and do the 2.4 update and things should work? i'm just not sure i want to do a backup with all the missing files, won't 2.4 open up with all the same problems or do you think the file naming issue will be corrected?
    I'm not saying that upgrading to 2.4 will necessarily fix the way things are now.  I doubt that it would make it worse, though.  I think you should make sure your photos and catalog are backed up, which it sounds like you said they are, then upgrade to 2.4 (if you're not already running that version).
    After the upgrade, you can go through your catalog and clean things up.
    -Scott

Maybe you are looking for