Missing effects installed yet not updating

I opened a project that uses effects that were missing from my system and received the red screen alert. I downloaded and installed the effects and they now appear in the effects menu in FCPX, yet FCPX is still telling me the 6 effects are missing. How do you fix this so that the effects update and apply?
They should just apply once they have been installed yet they do not. One of the effects did update when I installed it but there are 6 instances that will not.
The effects are: Alex4d Mask+4, Alex4d Mask+8 and Alex4d Mask+16. See the screengrab below showing the installed effects and also the missing effects alert for those same effects.

When you add or update an effect, title, transition etc in the effects browser, FCP will sometimes not see it until you close and reopen FCP. Even if it sees the additional effect it will not apply it to an instances in the project timeline. You have to reapply it. One would think in your case where the effect was missing it would automatically add it once it appeared in the browser but perhaps not. I would relaunch FCP and see if that fixes it. If not then You will need to reapply the masks.

Similar Messages

After Effects CC (2014) not updating (Mac)

Having issues trying to update After Effects 2014 as mentioned in the title.
Gets about 50% and then quits. Here is a log file in case anyone can she light on this.
10/20/14 10:18:28:310 | [INFO] | | OOBE | DE | | | | 531331 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:18:28:310 | [INFO] | | OOBE | DE | | | | 531331 | Visit http://www.adobe.com/go/loganalyzer/ for more information
10/20/14 10:18:28:310 | [INFO] | | OOBE | DE | | | | 531331 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:18:28:310 | [INFO] | | OOBE | DE | | | | 531331 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:18:28:310 | [INFO] | | OOBE | DE | | | | 531331 | START - Installer Session
10/20/14 10:18:28:310 | [INFO] | | OOBE | DE | | | | 531331 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:18:28:310 | [INFO] | | OOBE | DE | | | | 531331 | RIBS version: 8.0.0.22
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | OSX version: 10.10.0
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Total Timer]
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | CHECK: Single instance running
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | CHECK : Credentials
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | Load Deployment File
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | deploymentFile option not given
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | CHECK : Another Native OS installer already running
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | Create Required Folders
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | Assuming install mode
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | Looking up install source path
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | Sync Media DB ...
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Sync Media DB]
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | Pre check media db sync
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | End of Pre check media db sync. Exit code: 0
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Sync Media DB] took 99 milliseconds (0.099 seconds)
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | Ready to initialize session to start with ...
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [CreatePayloadSession]
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | -------------------- BEGIN - Updating Media Sources - BEGIN --------------------
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | Updated source path: /Users/global/Library/Caches/Adobe/AAMUpdater/AdobeAfterEffects-13.0.0-Trial/13.1.1
10/20/14 10:18:28:311 | [INFO] | | OOBE | DE | | | | 531331 | Updating media info for: {5678CF8D-3B5F-4CC6-B150-48945A838E63}
10/20/14 10:18:28:312 | [INFO] | | OOBE | DE | | | | 531331 | Ignoring original data since install source is local
10/20/14 10:18:28:312 | [INFO] | | OOBE | DE | | | | 531331 |   Type: 0, Volume Order: 1, Media Name: AfterEffects_CC_13_1_1_ftr
10/20/14 10:18:28:312 | [INFO] | | OOBE | DE | | | | 531331 |   Path: /Users/global/Library/Caches/Adobe/AAMUpdater/AdobeAfterEffects-13.0.0-Trial/13.1.1/paylo ads/AdobeAfterEffects13SupportAll-101014104158/AdobeAfterEffects13SupportAll-101014104158. zip
10/20/14 10:18:28:312 | [INFO] | | OOBE | DE | | | | 531331 | Updating media info for: {C135CD0F-ED45-4935-9B71-9D02735BD274}
10/20/14 10:18:28:312 | [INFO] | | OOBE | DE | | | | 531331 | Ignoring original data since install source is local
10/20/14 10:18:28:312 | [INFO] | | OOBE | DE | | | | 531331 |   Type: 0, Volume Order: 1, Media Name: AfterEffects_CC_13_1_1_ftr
10/20/14 10:18:28:312 | [INFO] | | OOBE | DE | | | | 531331 |   Path: /Users/global/Library/Caches/Adobe/AAMUpdater/AdobeAfterEffects-13.0.0-Trial/13.1.1/paylo ads/AdobeAfterEffects13AllTrial-101014102412/AdobeAfterEffects13AllTrial-101014102412.zip
10/20/14 10:18:28:312 | [INFO] | | OOBE | DE | | | | 531331 | -------------------- END - Updating Media Sources - END --------------------
10/20/14 10:18:28:317 | [INFO] | | OOBE | DE | | | | 531331 | Supported RIBS version range: [0.0.0.0,8.0.0.22]
10/20/14 10:18:28:318 | [INFO] | | OOBE | DE | | | | 531331 | ----------------- CreatePayloadSession: machine is x86 ---------------
10/20/14 10:18:28:554 | [INFO] | | OOBE | DE | | | | 531331 | Setting ignore refcount for 'Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4}' getting upgraded by 'Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}'
10/20/14 10:18:28:554 | [INFO] | | OOBE | DE | | | | 531331 | ______ Verify Dependency Subscribers ______
10/20/14 10:18:28:554 | [INFO] | | OOBE | DE | | | | 531331 | BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
10/20/14 10:18:28:554 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4}: 0 (0,0)
10/20/14 10:18:28:554 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63}: 0 (0,0)
10/20/14 10:18:28:554 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}: 0 (0,0)
10/20/14 10:18:28:554 | [INFO] | | OOBE | DE | | | | 531331 | END Operation order for all session payloads: mediaGroup (requires,satisfies)
10/20/14 10:18:28:555 | [INFO] | | OOBE | DE | | | | 531331 | Patch Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4} can be applied to product Adobe After Effects CC 2014 13.0.0.0 {2B22C750-5C3B-4738-B621-BA786AC7A494}
10/20/14 10:18:28:555 | [INFO] | | OOBE | DE | | | | 531331 | Patch Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63} can be applied to product Adobe After Effects CC 2014 Support 13.0.0.0 {A55FF34C-8AA8-4BE2-ABCC-12BE48AE8DD5}
10/20/14 10:18:28:555 | [INFO] | | OOBE | DE | | | | 531331 | Patch Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274} can be applied to product Adobe After Effects CC 2014 13.0.0.0 {2B22C750-5C3B-4738-B621-BA786AC7A494}
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Setting property "installSourcePath" to: /Users/global/Library/Caches/Adobe/AAMUpdater/AdobeAfterEffects-13.0.0-Trial/13.1.1
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Setting property "mode" to: silent
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Setting property "updateManifestPath" to: /Users/global/Library/Application Support/Adobe/AAMUpdater/1.0/Data/AdobeAfterEffects-13.0.0-Trial/13.1.1/13.1.1.xml
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Setting property "workflow" to: updater
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Overwrite property "extensionsOnly" to: 1
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Overwrite property "mode" to: silent
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Overwrite property "patchesOnly" to: 1
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Overwrite property "updateManifestPath" to: /Users/global/Library/Application Support/Adobe/AAMUpdater/1.0/Data/AdobeAfterEffects-13.0.0-Trial/13.1.1/13.1.1.xml
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Overwrite property "workflow" to: updater
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Found payload actions:
10/20/14 10:18:43:225 | [INFO] | | OOBE | DE | | | | 531331 | Deciding what installer mode to use...
10/20/14 10:18:43:233 | [INFO] | | OOBE | DE | | | | 531331 | BEGIN Setting requested payload actions
10/20/14 10:18:43:233 | [INFO] | | OOBE | DE | | | | 531331 | Value returned on lookup of payload: Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4} is: true
10/20/14 10:18:43:233 | [INFO] | | OOBE | DE | | | | 531331 | Action string for Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4} is install
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | Value returned on lookup of payload: Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63} is: true
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | Action string for Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63} is install
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | Value returned on lookup of payload: Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274} is: false
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | Action string for Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274} is install
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | END Setting requested payload actions
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | Collected advanced path check information for INSTALLDIR
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | INSTALLDIR is a well-formed path
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | INSTALLDIR is not the root path
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | INSTALLDIR is on a local volume
10/20/14 10:18:43:234 | [INFO] | | OOBE | DE | | | | 531331 | INSTALLDIR is on a writable volume
10/20/14 10:18:43:235 | [INFO] | | OOBE | DE | | | | 531331 | INSTALLDIR is not on a case sensitive volume
10/20/14 10:18:43:235 | [INFO] | | OOBE | DE | | | | 531331 | INSTALLDIR passed path basic path validation: /Applications
10/20/14 10:18:43:267 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [System check :{143C90E5-5321-4218-96CE-D419C7E672E4}]
10/20/14 10:18:43:275 | [INFO] | | OOBE | DE | | | | 531331 | In UninstallPreSystemCheckProc
10/20/14 10:18:43:275 | [INFO] | | OOBE | DE | | | | 531331 | Custom action return code: 0
10/20/14 10:18:43:275 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [System check :{143C90E5-5321-4218-96CE-D419C7E672E4}] took 8 milliseconds (0.008 seconds)
10/20/14 10:18:43:364 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [System check :{C135CD0F-ED45-4935-9B71-9D02735BD274}]
10/20/14 10:18:43:365 | [INFO] | | OOBE | DE | | | | 531331 | In InstallPreSystemCheckProc
10/20/14 10:18:43:365 | [INFO] | | OOBE | DE | | | | 531331 | Custom action return code: 0
10/20/14 10:18:43:365 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [System check :{C135CD0F-ED45-4935-9B71-9D02735BD274}] took 1 milliseconds (0.001 seconds)
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 | BEGIN InstallOperationsQueue Unordered operations
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4}: with operation remove
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63}: with operation repair
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}: with operation install
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 | END InstallOperationsQueue Unordered operations
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 | BEGIN InstallOperationsQueue Ordered operations
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4}: with operation remove
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63}: with operation repair
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}: with operation install
10/20/14 10:18:43:495 | [INFO] | | OOBE | DE | | | | 531331 | END InstallOperationsQueue Ordered operations
10/20/14 10:18:43:496 | [WARN] | | OOBE | DE | | | | 531331 | DW035: Patcher: Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63} has already been applied. Patchers cannot be repaired/reinstalled, skipping this patcher
10/20/14 10:18:43:508 | [INFO] | | OOBE | DE | | | | 531331 | Payloads passed preflight validation.
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 | Call PreSession Custom Hook
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Pre session :{C135CD0F-ED45-4935-9B71-9D02735BD274}]
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 | In InstallSessionOpenProc
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 | Custom action return code: 0
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Pre session :{C135CD0F-ED45-4935-9B71-9D02735BD274}] took 0 milliseconds (0 seconds)
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 | BEGIN InstallOperationsQueue Unordered operations
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4}: with operation remove
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63}: with operation repair
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}: with operation install
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 | END InstallOperationsQueue Unordered operations
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 | BEGIN InstallOperationsQueue Ordered operations
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4}: with operation remove
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63}: with operation repair
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 |   Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}: with operation install
10/20/14 10:18:43:509 | [INFO] | | OOBE | DE | | | | 531331 | END InstallOperationsQueue Ordered operations
10/20/14 10:18:43:552 | [INFO] | | OOBE | DE | | | | 531331 | Calling the custom action code for pre-remove for payload Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4}
10/20/14 10:18:43:552 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Pre payload :{143C90E5-5321-4218-96CE-D419C7E672E4}]
10/20/14 10:18:43:552 | [INFO] | | OOBE | DE | | | | 531331 | In PrePayloadUninstallProc
10/20/14 10:18:43:552 | [INFO] | | OOBE | DE | | | | 531331 | Custom action return code: 0
10/20/14 10:18:43:552 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Pre payload :{143C90E5-5321-4218-96CE-D419C7E672E4}] took 0 milliseconds (0 seconds) DTR = inf KBPS (inf MBPS)
10/20/14 10:18:43:552 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Payload Operation :{143C90E5-5321-4218-96CE-D419C7E672E4}]
10/20/14 10:18:43:553 | [INFO] | | OOBE | DE | | | | 533660 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:18:43:553 | [INFO] | | OOBE | DE | | | | 533660 | Installer Operation: PayloadUninstaller
10/20/14 10:18:43:553 | [INFO] | | OOBE | DE | | | | 533660 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:18:43:553 | [INFO] | | OOBE | DE | | | | 533660 | Session {C135CD0F-ED45-4935-9B71-9D02735BD274} modify request for AdobeCode: {143C90E5-5321-4218-96CE-D419C7E672E4}
10/20/14 10:18:43:555 | [INFO] | | OOBE | DE | | | | 533660 | Effective AdobeCode for: {143C90E5-5321-4218-96CE-D419C7E672E4} is {143C90E5-5321-4218-96CE-D419C7E672E4}
10/20/14 10:18:43:557 | [INFO] | | OOBE | DE | | | | 533660 | Payload Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4}: Calling ARKEngine from path /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources
10/20/14 10:18:56:633 | [INFO] | | OOBE | DE | | | | 533660 | CustomizedPatch property not found in database
10/20/14 10:18:56:703 | [INFO] | | OOBE | DE | | | | 533660 | Beginning un-installation for payload at /Library/Application Support/Adobe/Uninstall/{143C90E5-5321-4218-96CE-D419C7E672E4}.db
10/20/14 10:18:57:516 | [INFO] | | OOBE | DE | | | | 533660 | Completing un-installation for payload at /Library/Application Support/Adobe/Uninstall/{143C90E5-5321-4218-96CE-D419C7E672E4}.db
10/20/14 10:18:57:549 | [INFO] | | OOBE | DE | | | | 533660 | Physical payload uninstall result:0
10/20/14 10:18:57:615 | [INFO] | | OOBE | DE | | | | 531331 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 0 =*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:18:57:615 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Payload Operation :{143C90E5-5321-4218-96CE-D419C7E672E4}] took 14063 milliseconds (14.063 seconds) DTR = 11800.9 KBPS (11.5243 MBPS)
10/20/14 10:18:57:824 | [INFO] | | OOBE | DE | | | | 531331 | User specified overrideFile:
10/20/14 10:18:58:057 | [INFO] | | OOBE | DE | | | | 531331 | Successfully updated the csu inventory for Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4} return values 0:0
10/20/14 10:18:58:059 | [INFO] | | OOBE | DE | | | | 531331 | Calling the custom action code for post-remove for payload Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial 13.0.2.0 {143C90E5-5321-4218-96CE-D419C7E672E4}
10/20/14 10:18:58:065 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Post payload :{143C90E5-5321-4218-96CE-D419C7E672E4}]
10/20/14 10:18:58:065 | [INFO] | | OOBE | DE | | | | 531331 | In PostPayloadUninstallProc
10/20/14 10:18:58:065 | [INFO] | | OOBE | DE | | | | 531331 | Custom action return code: 0
10/20/14 10:18:58:065 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Post payload :{143C90E5-5321-4218-96CE-D419C7E672E4}] took 0 milliseconds (0 seconds)
10/20/14 10:18:58:175 | [WARN] | | OOBE | DE | | | | 531331 | DW035: Patcher: Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63} has already been applied. Patchers cannot be repaired/reinstalled, skipping this patcher
10/20/14 10:18:58:175 | [INFO] | | OOBE | DE | | | | 531331 | Skipping payload Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll 13.1.1.0 {5678CF8D-3B5F-4CC6-B150-48945A838E63} as payload is not cached
10/20/14 10:18:58:679 | [INFO] | | OOBE | DE | | | | 531331 | Calling the custom action code for pre-install for payload Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}
10/20/14 10:18:58:680 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Pre payload :{C135CD0F-ED45-4935-9B71-9D02735BD274}]
10/20/14 10:18:58:680 | [INFO] | | OOBE | DE | | | | 531331 | In PrePayloadInstallProc
10/20/14 10:18:58:680 | [INFO] | | OOBE | DE | | | | 531331 | Custom action return code: 0
10/20/14 10:18:58:680 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Pre payload :{C135CD0F-ED45-4935-9B71-9D02735BD274}] took 0 milliseconds (0 seconds)
10/20/14 10:18:58:680 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Payload Operation :{C135CD0F-ED45-4935-9B71-9D02735BD274}]
10/20/14 10:18:58:692 | [INFO] | | OOBE | DE | | | | 536201 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:18:58:692 | [INFO] | | OOBE | DE | | | | 536201 | Installer Operation: PayloadInstaller
10/20/14 10:18:58:692 | [INFO] | | OOBE | DE | | | | 536201 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:18:58:692 | [INFO] | | OOBE | DE | | | | 536201 | Request to install payload
10/20/14 10:18:58:724 | [INFO] | | OOBE | DE | | | | 536201 | Payload Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}: Calling ARKEngine from path /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources
10/20/14 10:19:25:891 | [INFO] | | OOBE | DE | | | | 536201 | Extracting assets complete. Number assets: 1
10/20/14 10:19:25:891 | [INFO] | | OOBE | DE | | | | 536201 | CustomizedPatch property not found in database
10/20/14 10:19:25:891 | [INFO] | | OOBE | DE | | | | 536201 | Beginning installation for payload at /Users/global/Library/Caches/Adobe/AAMUpdater/AdobeAfterEffects-13.0.0-Trial/13.1.1/paylo ads/AdobeAfterEffects13AllTrial-101014102412/Install.db
10/20/14 10:19:26:279 | [ERROR] | | OOBE | DE | | | | 536201 | DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)
10/20/14 10:19:26:279 | [WARN] | | OOBE | DE | | | | 536201 | DW063: Command ARKCopySymlinkCommand failed.(Seq 212)
10/20/14 10:19:26:279 | [INFO] | | OOBE | DE | | | | 536201 | Completing installation for payload at /Users/global/Library/Caches/Adobe/AAMUpdater/AdobeAfterEffects-13.0.0-Trial/13.1.1/paylo ads/AdobeAfterEffects13AllTrial-101014102412/Install.db
10/20/14 10:19:27:701 | [INFO] | | OOBE | DE | | | | 531331 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:19:27:701 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Payload Operation :{C135CD0F-ED45-4935-9B71-9D02735BD274}] took 29022 milliseconds (29.022 seconds) DTR = 11.0261 KBPS (0.0107677 MBPS)
10/20/14 10:19:27:702 | [INFO] | | OOBE | DE | | | | 531331 | User specified overrideFile:
10/20/14 10:19:27:703 | [INFO] | | OOBE | DE | | | | 531331 | The csu inventory was not updated for payload Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}, value of local var is -1
10/20/14 10:19:27:703 | [INFO] | | OOBE | DE | | | | 531331 | Calling the ROLLBACK custom action code for pre-install for payload Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274}
10/20/14 10:19:27:703 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Pre payload :{C135CD0F-ED45-4935-9B71-9D02735BD274}]
10/20/14 10:19:27:703 | [INFO] | | OOBE | DE | | | | 531331 | In PrePayloadInstallProc
10/20/14 10:19:27:703 | [INFO] | | OOBE | DE | | | | 531331 | Custom action return code: 0
10/20/14 10:19:27:703 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Pre payload :{C135CD0F-ED45-4935-9B71-9D02735BD274}] took 0 milliseconds (0 seconds)
10/20/14 10:19:28:180 | [INFO] | | OOBE | DE | | | | 531331 | No operation. We're done:
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | Total components installed: 0
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | Total components repaired: 0
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | Successfully removed 1 component:
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | - Adobe After Effects CC 2014_13.0.2_AdobeAfterEffects13AllTrial
10/20/14 10:19:30:188 | [WARN] | | OOBE | DE | | | | 531331 | DW050: The following payload errors were found during install:
10/20/14 10:19:30:188 | [WARN] | | OOBE | DE | | | | 531331 | DW050: - Adobe After Effects CC 2014 Support_13.1.1_AdobeAfterEffects13SupportAll: Patch already installed
10/20/14 10:19:30:188 | [WARN] | | OOBE | DE | | | | 531331 | DW050: - Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial: Install failed
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | Call PostSession Custom Hook
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | ::START TIMER:: [Post session :{C135CD0F-ED45-4935-9B71-9D02735BD274}]
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | In InstallSessionCloseProc
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | Custom action return code: 0
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Post session :{C135CD0F-ED45-4935-9B71-9D02735BD274}] took 0 milliseconds (0 seconds)
10/20/14 10:19:30:188 | [INFO] | | OOBE | DE | | | | 531331 | :: END TIMER :: [Total Timer] took 63003 milliseconds (63.003 seconds) DTR = 2626.1 KBPS (2.56455 MBPS)
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | -------------------------------------- Summary --------------------------------------
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | - 0 fatal error(s), 1 error(s)
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | OSX version: 10.10.0
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 |
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | ----------- Payload: Adobe After Effects CC 2014_13.1.1_AdobeAfterEffects13AllTrial 13.1.1.0 {C135CD0F-ED45-4935-9B71-9D02735BD274} -----------
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 |
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | Please search the above error string(s) to find when the error occurred.
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | These errors resulted in installer Exit Code mentioned below.
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | -------------------------------------------------------------------------------------
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 |
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | Exit Code: 7 - Unable to complete Silent workflow.
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | Please see specific errors for troubleshooting. For example, ERROR: DS015 ...
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | END - Installer Session
10/20/14 10:19:31:191 | [INFO] | | OOBE | DE | | | | 531331 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

You have a version conflict with the mochaAE folder in there. Run the cleaner tool and start from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

AIF - install bootloader not updating syslinux.cfg or menu.lst

I'm making a custom install iso with archiso+aif, aif is working fine, except the install bootloader is not updating the
/mnt/boot/syslinux/syslinux.cfg
or
/mnt/boot/grub/menu.lst
as per installation, the mentioned files are missing kernel initrd etc., entries.
And unlike official archlinux iso/cd installer, aif+git (interactive) installer is not showing/asking to review the syslinux.cfg or grub's menu.lst file before installing the selected bootloader.
So, Please show me how to get grub and syslinux's configuration files to get properly updated by aif's install bootloader method in interactive procedure (aif -p interactive) thanks.

I'm making a custom install iso with archiso+aif, aif is working fine, except the install bootloader is not updating the
/mnt/boot/syslinux/syslinux.cfg
or
/mnt/boot/grub/menu.lst
as per installation, the mentioned files are missing kernel initrd etc., entries.
And unlike official archlinux iso/cd installer, aif+git (interactive) installer is not showing/asking to review the syslinux.cfg or grub's menu.lst file before installing the selected bootloader.
So, Please show me how to get grub and syslinux's configuration files to get properly updated by aif's install bootloader method in interactive procedure (aif -p interactive) thanks.

Lion install did not update background/screen saver images

I installed of Lion on my Macbook and it did not update the background/screen saver images with the new ones, anyone know why?

Check your Macintosh HD/Applications/ folder for a program called "Install OS X Mountain Lion" and then open this to run the installer.

Mountain Lion Notes App missing (IT installed Lotus Notes over the top)

My IT department installed Lotus Notes and it installed over the top of the Mountain Lion Notes application and thus deleted it. I renamed the Lotus Notes application (originally just called Notes). How do I get the original OSX notes application back?

Ok, found the solution, download mountain lion from the app store once more, then use Pacifist to extract the notes appllication again.

Client Installing, but not updating in SCCM

I have SCCM 2012 SP1. When I push out a SCCM client, to Server 2003; the client gets installed. On the 2003 Server, is shows "Configuration Manager" in Control Panel, and when I do a "Find Site" it finds
the Site just fine...
However, in SCCM it shows that the server doesn't have the client installed.
I have the correct boundary set, and BITS 2.5 installed on Server 2003.
Any reason why SCCM would say, the client isn't installed ?
Thank you for your time..

Thank you for your reply,
I've installed and reinstalled on several systems, and waited up to 2 days..
looking in the CcmMessaging.log
<![LOG[No reply message from Server. Server may be temporarily down or a transient network error.]LOG]!><time="19:50:27.372+300" date="01-04-2014" component="CcmMessaging" context="" type="2" thread="2500" file="ccmhttpmessage.cpp:1308">
<![LOG[Post to https://HTL-SCCM.network.internal/ccm_system_windowsauth/request failed with 0x8000000a.]LOG]!>
0x8000000a = The data necessary to complete this operation is not yet available.
This sounds a little like this machine is not correctly communicating with the MP.
Is the machine "healthy"? Patched? Firewalled?
Outbound networking from this machine, to your network (specifically where the MP resides), is otherwise ok?
Check other logs (CCM logs and general Windows logs) - I smell a rat..
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Fresh install CS4 not updating

I just did a fresh install of CS4 on OSX Mavericks. I know I'm supposed to check for some updates. Adobe Updater keeps telling me no updates found. What gives?

Please be aware you run the software not compatible with this version! So this can cause all kind of issues.
Adobe - Creative Suite 4 Master Collection : System requirements
Also blocking adobe domains in the hosts file can be a root cause.Sign in, activation, or connection errors | CS5.5 and later point 3.
General advice, use a update to CC to ensure it runs correctly on OS X 10.9.x Good luck!

Missing compatibility libraries, or not updated on AUR ?

Hi,
where to start ? K lets go, ... i ve downloaded the 1.5 full patch of the game EnemyTerritory:QuakeWars and installed it.
Now i get this error message:
WARNING: SDL_SetVideoMode failed: Couldn't find matching GLX visual
Mi internet research brings me to the point to think about 32bit compatibility.
glxinfo | grep direct ->Yes
[z13l5ch31b3@fUn ~]$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Wed Oct 1 15:09:35 PDT 2008
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# Serial Mouse not detected
# USB Mouse not detected
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
and lsmod
[z13l5ch31b3@fUn ~]$ lsmod
Module Size Used by
nvidia 6893904 26
udf 82980 1
crc_itu_t 3840 1 udf
isofs 33700 0
zlib_inflate 20096 1 isofs
ipv6 259812 10
oss_usb 111116 1
oss_hdaudio 135396 3
osscore 535060 2 oss_usb,oss_hdaudio
parport_pc 36676 1
ppdev 9092 0
irtty_sir 7040 0
joydev 11584 0
sir_dev 13188 1 irtty_sir
lp 10980 0
parport 33004 3 parport_pc,ppdev,lp
irda 112568 1 sir_dev
psmouse 38288 0
crc_ccitt 3840 1 irda
ppp_generic 24988 0
serio_raw 7044 0
pcspkr 4352 0
k8temp 6144 0
i2c_viapro 9492 0
agpgart 29652 1 nvidia
shpchp 31512 0
i2c_core 21140 2 nvidia,i2c_viapro
pci_hotplug 27812 1 shpchp
sg 28596 0
thermal 16796 0
processor 33836 1 thermal
fan 6020 0
evdev 10880 5
usbhid 46016 0
hid 40960 1 usbhid
button 7824 0
ff_memless 6664 1 usbhid
battery 12036 0
ac 6020 0
slhc 7680 1 ppp_generic
r8169 27396 0
rtc_cmos 11424 0
rtc_core 17436 1 rtc_cmos
rtc_lib 4480 1 rtc_core
ext3 125704 1
jbd 45716 1 ext3
mbcache 8708 1 ext3
sr_mod 16836 1
cdrom 36128 1 sr_mod
sd_mod 25240 3
ehci_hcd 35596 0
uhci_hcd 23952 0
usbcore 132080 5 oss_usb,usbhid,ehci_hcd,uhci_hcd
sata_via 9220 0
ahci 27144 0
ata_generic 6788 0
pata_via 9732 3
pata_jmicron 4992 0
pata_acpi 6016 0
libata 150048 6 sata_via,ahci,ata_generic,pata_via,pata_jmicron,pata_acpi
scsi_mod 95692 4 sg,sr_mod,sd_mod,libata
dock 9488 1 libata
...at last the grep glx
[z13l5ch31b3@fUn ~]$ cat /etc/X11/xorg.conf | grep glx
Load "glx"
I ve tried to install ia32-libs, read about it,... but there are no packages on AUR.
In the Zerowings - FAQ i was reading this:
Running 32 bit binaries on a 64 bit system
You need to install various 32 bit compatibility libraries. Most distributions have an all-in-one package that will provide everything you need.
On another thread in our forum, i found this (for ET:W http://bbs.archlinux.org/viewtopic.php?id=46846 ):
System:
Archlinux 64bit
32bit libs: (installed with pacman "What else cool")
lib32-glibc, lib32-gcc-libs, lib32-alsa-lib, lib32-libstdc++5, lib32-openal, lib32-libxdamage, lib32-libxfixes, lib32-sdl
but i cant find em on pacman,... or AUR.
Then i tried to download the lib32-libgl ... from here -> http://archlinux.org/packages/search/?q=lib32-libgl ... but its not online, too.
So what the heck is goin' on ? Why cant i run my ET:QW on Arch64 ? Any chances ?
At last my ET:QW lines:
[z13l5ch31b3@fUn ~]$ cd /usr/local/games/etqw/
[z13l5ch31b3@fUn etqw]$ ./etqw
ETQW 1.5.12663.12663 linux-x86 May 9 2008 13:50:52
found interface lo - loopback
found interface eth0 - 192.168.0.10/255.255.255.0
CPU: AMD CPU with MMX & 3DNow! & SSE & SSE2 & SSE3
ETQW using generic code for SIMD processing
enabled Flush-To-Zero mode
------ Initializing File System ------
Loaded pk4 /usr/local/games/etqw/base/game000.pk4 with checksum 0x3efd73a5
Loaded pk4 /usr/local/games/etqw/base/game001.pk4 with checksum 0xa02f1c18
Loaded pk4 /usr/local/games/etqw/base/game002.pk4 with checksum 0x87457e61
Loaded pk4 /usr/local/games/etqw/base/pak000.pk4 with checksum 0x442eb08b
Loaded pk4 /usr/local/games/etqw/base/pak001.pk4 with checksum 0x10e16e6
Loaded pk4 /usr/local/games/etqw/base/pak002.pk4 with checksum 0x8dbe7353
Loaded pk4 /usr/local/games/etqw/base/pak003.pk4 with checksum 0x99dfcabb
Loaded pk4 /usr/local/games/etqw/base/pak004.pk4 with checksum 0x7e49f838
Loaded pk4 /usr/local/games/etqw/base/pak005.pk4 with checksum 0x5ccc7213
Loaded pk4 /usr/local/games/etqw/base/pak006.pk4 with checksum 0x9edf1b7d
Loaded pk4 /usr/local/games/etqw/base/pak007.pk4 with checksum 0x74a1a2f
Loaded pk4 /usr/local/games/etqw/base/pak008.pk4 with checksum 0x71a93b80
Loaded pk4 /usr/local/games/etqw/base/zpak_english000.pk4 with checksum 0x977c7bd0
Loaded pk4 /usr/local/games/etqw/base/zpak_english001.pk4 with checksum 0x6583cd8
Loaded pk4 /usr/local/games/etqw/base/zpak_english002.pk4 with checksum 0x8dc70e3d
Loaded pk4 /usr/local/games/etqw/base/zpak_english003.pk4 with checksum 0xc2d7ed49
Loaded pk4 /usr/local/games/etqw/base/zpak_french001.pk4 with checksum 0x3bd7a062
Loaded pk4 /usr/local/games/etqw/base/zpak_french002.pk4 with checksum 0x79287190
Loaded pk4 /usr/local/games/etqw/base/zpak_french003.pk4 with checksum 0x8f315c7b
Loaded pk4 /usr/local/games/etqw/base/zpak_german001.pk4 with checksum 0xa694c3f1
Loaded pk4 /usr/local/games/etqw/base/zpak_german002.pk4 with checksum 0x64bee731
Loaded pk4 /usr/local/games/etqw/base/zpak_german003.pk4 with checksum 0x370e6186
Loaded pk4 /usr/local/games/etqw/base/zpak_korean000.pk4 with checksum 0xd42c084
Loaded pk4 /usr/local/games/etqw/base/zpak_korean001.pk4 with checksum 0x4de6a4e7
Loaded pk4 /usr/local/games/etqw/base/zpak_korean002.pk4 with checksum 0x15d2c9af
Loaded pk4 /usr/local/games/etqw/base/zpak_korean003.pk4 with checksum 0x4f8dfac1
Loaded pk4 /usr/local/games/etqw/base/zpak_polish001.pk4 with checksum 0x2575ff8e
Loaded pk4 /usr/local/games/etqw/base/zpak_polish002.pk4 with checksum 0x3ab92dd6
Loaded pk4 /usr/local/games/etqw/base/zpak_polish003.pk4 with checksum 0x8d9af876
Loaded pk4 /usr/local/games/etqw/base/zpak_russian001.pk4 with checksum 0xf3e91581
Loaded pk4 /usr/local/games/etqw/base/zpak_russian002.pk4 with checksum 0x38b1a37c
Loaded pk4 /usr/local/games/etqw/base/zpak_russian003.pk4 with checksum 0x7e90b040
Loaded pk4 /usr/local/games/etqw/base/zpak_spanish001.pk4 with checksum 0xd609566c
Loaded pk4 /usr/local/games/etqw/base/zpak_spanish002.pk4 with checksum 0xcf994ada
Loaded pk4 /usr/local/games/etqw/base/zpak_spanish003.pk4 with checksum 0xe7d989bc
Current search path:
/home/DerWanderer/.etqwcl/base
/usr/local/games/etqw/base
/usr/local/games/etqw/base/zpak_spanish003.pk4 (6 files)
/usr/local/games/etqw/base/zpak_spanish002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_spanish001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_russian003.pk4 (5 files)
/usr/local/games/etqw/base/zpak_russian002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_russian001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_polish003.pk4 (6 files)
/usr/local/games/etqw/base/zpak_polish002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_polish001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_korean003.pk4 (5 files)
/usr/local/games/etqw/base/zpak_korean002.pk4 (12 files)
/usr/local/games/etqw/base/zpak_korean001.pk4 (12 files)
/usr/local/games/etqw/base/zpak_korean000.pk4 (6 files)
/usr/local/games/etqw/base/zpak_german003.pk4 (5 files)
/usr/local/games/etqw/base/zpak_german002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_german001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_french003.pk4 (14 files)
/usr/local/games/etqw/base/zpak_french002.pk4 (119 files)
/usr/local/games/etqw/base/zpak_french001.pk4 (13 files)
/usr/local/games/etqw/base/zpak_english003.pk4 (7 files)
/usr/local/games/etqw/base/zpak_english002.pk4 (117 files)
/usr/local/games/etqw/base/zpak_english001.pk4 (9 files)
/usr/local/games/etqw/base/zpak_english000.pk4 (1018 files)
/usr/local/games/etqw/base/pak008.pk4 (1496 files)
/usr/local/games/etqw/base/pak007.pk4 (1510 files)
/usr/local/games/etqw/base/pak006.pk4 (3 files)
/usr/local/games/etqw/base/pak005.pk4 (2172 files)
/usr/local/games/etqw/base/pak004.pk4 (72 files)
/usr/local/games/etqw/base/pak003.pk4 (1133 files)
/usr/local/games/etqw/base/pak002.pk4 (1637 files)
/usr/local/games/etqw/base/pak001.pk4 (1067 files)
/usr/local/games/etqw/base/pak000.pk4 (9350 files)
/usr/local/games/etqw/base/game002.pk4 (3 files)
/usr/local/games/etqw/base/game001.pk4 (11 files)
/usr/local/games/etqw/base/game000.pk4 (3 files)
game DLL: 0x0 in pak: 0x0
Addon pk4s:
file system initialized.
----- Initializing Decls -----
Decompressing the global token cache...3566Kb
couldn't exec 'etqwconfig.cfg'
execing 'localization/english/defaultbinds.cfg'
couldn't exec 'etqwbinds.cfg'
couldn't exec 'autoexec.cfg'
Vendor: Device:
/proc/cpuinfo CPU frequency: 2998.37 MHz
parse /proc/cpuinfo for CPU information
2 logical, 1 physical CPU(s)
detecting video ram (set sys_videoRam on command line to override) ..
found XNVCtrl extension 1.17
Detected
1 3.00 GHz CPU
2032 MB of System memory
128 MB of Video memory on an optimal video architecture
This system qualifies for Low quality.
Initializing SDL subsystem
Loading GL driver 'libGL.so.1' through SDL
Desktop resolution: 1024x768
execing 'specs/minspec.dat'
execing 'specs/minspec_cpu.dat'
execing 'specs/minspec_gamedetail.dat'
execing 'specs/minspec_gpu.dat'
execing 'specs/minspec_gpudetail.dat'
execing 'specs/minspec_lighting.dat'
execing 'specs/minspec_foliage.dat'
Vendor: Device:
execing 'specs/minspec_foliage.dat'
Opening IP socket: localhost:-1
thread priority set to 1
Failed to open server license code file for reading.
SDL_ListModes:
1024x768 960x600 840x525 832x624 800x600 800x512 768x576 720x450 720x400 640x512 640x480
640x400 640x384 640x350 576x432 576x384 512x384 416x312 400x300 360x200 320x240
320x200 320x175
SDL_ListModes are currently ignored for resolution filtering. Set r_useSDLModes to 1 if you want it
WARNING: SDL_SetVideoMode failed: Couldn't find matching GLX visual
------- Initializing renderSystem --------
----- R_InitOpenGL -----
signal caught: 'Segmentation fault', si_code 1
callstack:
0x0
[0x082e80e1]
[0x082e549d]
[0xb7f9140c]
Trying to exit gracefully..
--------------- BSE Shutdown ----------------
Shutting down SDL subsystem
idRenderSystem::Shutdown()
I really hope yo can help me. Thnx for reading...

z13l5ch31b3 wrote:
skottish wrote:
z13l5ch31b3 wrote:AUR is on my mirrorlist.
AUR can't be on your mirror list. There are no binaries there. The packages that have binaries from AUR are in community.
Ive added with "nano /etc/pacman.d/mirrorlist" the "Server = http://repo.archlinux.fr/i686" at the end of the list. If i am typing "yaourt armyops" , the repository of the correct package will be shown. So AUR is on my mirrorlist or not ?
Can i install the lib32 version without deleting the 64bit driver ?
me wrote:AUR can't be on your mirror list. There are no binaries there. The packages that have binaries from AUR are in community.
And no, lib32 versions will not overwrite 64 bit libraries.
pacman wrote:[skottish@iasE ~]$ pacman -Ss | grep lib32
community/lib32-alsa-lib 1.0.17a-1 (lib32)
community/lib32-atk 1.22.0-1 (lib32)
community/lib32-cairo 1.6.4-1.1 (lib32)
community/lib32-catalyst-utils 8.8-1 (lib32)
community/lib32-dbus 1.2.3-1
community/lib32-e2fsprogs 1.40.8-1.1
community/lib32-expat 2.0.1-1.1 (lib32)
community/lib32-fontconfig 2.6.0-2 (lib32)
community/lib32-freetype2 2.3.7-1 (lib32)
community/lib32-gcc-libs 4.3.2-1 (lib32)
community/lib32-glib2 2.18.0-1 (lib32)
community/lib32-glibc 2.8-3 (lib32)
community/lib32-gnutls 2.4.1-3 (lib32)
community/lib32-gtk2 2.12.11-3 (lib32)
community/lib32-libart-lgpl 2.3.20-1 (lib32)
community/lib32-libcups 1.3.8-2 (lib32)
community/lib32-libdrm 2.3.1-1 (lib32)
community/lib32-libgcrypt 1.4.2-1 (lib32)
community/lib32-libgl 7.0.3-2 (lib32)
community/lib32-libgpg-error 1.6-1.1 (lib32)
community/lib32-libice 1.0.4-1 (lib32)
community/lib32-libjpeg 6b-4 (lib32)
community/lib32-libpng 1.2.31-1 (lib32)
community/lib32-libsm 1.1.0-1.1 (lib32)
community/lib32-libstdc++5 3.3.6-3 (lib32)
community/lib32-libtasn1 1.5-2 (lib32)
community/lib32-libtiff 3.8.2-4 (lib32)
community/lib32-libx11 1.1.5-2 (lib32)
community/lib32-libxau 1.0.4-1 (lib32)
community/lib32-libxcb 1.1.90.1-1 (lib32)
community/lib32-libxcomposite 0.4.0-1 (lib32)
community/lib32-libxcursor 1.1.9-1 (lib32)
community/lib32-libxdamage 1.1.1-1 (lib32)
community/lib32-libxdmcp 1.0.2-1 (lib32)
community/lib32-libxext 1.0.4-1 (lib32)
community/lib32-libxfixes 4.0.3-1 (lib32)
community/lib32-libxft 2.1.13-1 (lib32)
community/lib32-libxi 1.1.3-1 (lib32)
community/lib32-libxinerama 1.0.3-1 (lib32)
community/lib32-libxml2 2.6.32-2 (lib32)
community/lib32-libxmu 1.0.4-1 (lib32)
community/lib32-libxrandr 1.2.3-1 (lib32)
community/lib32-libxrender 0.9.4-1 (lib32)
community/lib32-libxslt 1.1.24-1 (lib32)
community/lib32-libxt 1.0.5-1 (lib32)
community/lib32-libxtst 1.0.3-1 (lib32)
community/lib32-libxxf86vm 1.0.2-1 (lib32)
community/lib32-lzo2 2.02-3.1 (lib32)
community/lib32-mesa 7.0.3-2 (lib32)
community/lib32-nas 1.9.1-2 (lib32)
community/lib32-ncurses 5.6-8 (lib32)
community/lib32-nvidia-utils 177.80-1 (lib32)
community/lib32-openal 0.0.8-4.1 (lib32)
community/lib32-opencdk 0.6.6-1.1 (lib32)
community/lib32-pango 1.20.5-1 (lib32)
community/lib32-pciutils 3.0.0-2 (lib32)
community/lib32-pcre 7.8-1 (lib32)
community/lib32-pixman 0.12.0-1 (lib32)
community/lib32-qt 4.4.2-2 (lib32)
community/lib32-qt3 3.3.8-9 (lib32)
community/lib32-readline 5.2-8 (lib32)
community/lib32-sdl 1.2.13-1 (lib32)
community/lib32-zlib 1.2.3.3-2 (lib32)
Last edited by skottish (2008-10-10 18:25:34)

Flash Player 9 Installed , Yet not working.

I have XP Home sp2 . I have Installed Flash Player 9
, and it shows on the test link. Also ,I've set my permissions ,and
been through the reinstall process many times. In reading the help
info. in support , I feel I've done about all I can . An official
request is in order for a higher power to shine light in this dark
area. Left to either evoke the aide of Tech. support or devine
intervention. My e-mail addy is [email protected] Any help
would be great , Thank You ... Nsite

YouTube and MAJOR video sites are converting to HTML5 video which requires no plug-in.
IE11 is a "rolling train wreck". The idiots at Microsoft DELIBERATELY screwed up the "user agent strings" so it can't be Identified properly (http://blogs.msdn.com/b/ieinternals/archive/2013/09/21/internet-explorer-11-user-agent-str ing-ua-string-sniffing-compatibility-with-gecko-webkit.aspx), and they think this was a good idea. Millions of users like you say otherwise, but then, it isn't the first stupid decision they've made without any testing at all in the real world. No wonder Apple has topped them as the #1 tech company on earth.
I recommend using ANYTHING AT ALL besides IE:
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Inforecord Efective price is not Updating

Dear All
I have seen that the Effective price is not updating in Inforecord.
Kindly can I know why it is not updating?
I am Maintaining gross price condition
eg:ZM00 8:00/-
Result: Condition
Net Price: 8.00/-
Effective Price: 0.00/-
Regards
Chaitanya

System can only update Net or Effective price in the info record based on the customizing setting made.
sproMMPIR---Define price history.
Reg,
Deepak.
Edited by: deepak k b on Oct 30, 2008 7:22 AM

TS3212 I installed an iTunes update on my Windows Vista Laptop and iTunes wouldn't start saying it was missing MSVCR80.dll, now when I start Outlook it is going on about a mobileme error? Any advice? I'm tempted to not use iTunes ever again.

I installed an iTunes update on my Windows Vista Laptop and iTunes wouldn't start saying it was missing MSVCR80.dll, now when I start Outlook it is going on about a mobileme error? Any advice? I'm tempted to not use iTunes ever again.

Troubleshooting issues with iTunes for Windows updates - MSVCR80

Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.

Updated to IOS6 and now my apps will not update on the Ipad2. I have to delete them and then re-install. But I have several hundred apps and this is cumbersome. Seems the new software is too buggy. I am telling people not to update software yet.

Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I just installed the Firefox update in my Dell Studio laptop and now it will not start nor can it effect automatice repairs. What to do?

I had had problems with the Quick time feature that came with Nikon's Picture Project software and had to delete it. (Actually, the operating system deleted it and Picture project when it repaired itself by reverting to a previous configuration.) I noticed that Quick time was again installed when I updated Firefox. Since I can't get the machine up and running, I am at a loss as to how to remove Quick time if that is what needs to be done.

I suggest taking it back to Best Buy. Once it has been opened, Apple will not handle the phone. Best Buy or another 3rd party are your only choices. Best Buy probably made an error when replacing the screen. Understand they are not an authorized Apple Service Center.

HT1420 Just tried to download and install latest Itunes update and it would not load correctly. Keep getting a warning that file MSVCR80.dll is missing. I have reinstalled Itunes but did not correct. I have a PC with Windows XP. Itunes ran great prior to

Just tried to download and install latest ITunes update and it would not finish update. I aborted the update and then my ITunes will not open. I keep getting and error stating that file MSVCR80.dll not found. I reinstalled my original ITune file but this did not clear this error. Any ideas.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99732)

IMac G5 stops updating at 10.4.10, will not install any newer update/itunes

My first post, let's make it a good one. I have two macs so I fell behind on updating this iMac due to a poor iternet connection. Now that I have a solid internet connection, I can't update it!
About my iMac:
Machine Name: iMac G5
Machine Model: PowerMac12,1
CPU Type: PowerPC G5 (3.1)
Number Of CPUs: 1
CPU Speed: 2.1 GHz
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 700 MHz
Boot ROM Version: 5.2.6f1
Macintosh HD:
Capacity: 233.64 GB
Available: 174.74 GB
Everything I find just seems to go womp, womp, woommppp in my face. I have verified and repaired both the disk & permissions, cleaned up cache files, validated preference files... all to no avail.
Please help, what can I do to install 10.4.11? I believe I am behind on updating my airport as well. Probably everything that could be updated. DEFINTELY security updates.

Hi urboyruru and welcome to the forums!
The following is a general guide to safe updating, so some of it may be redundant for you, but as we have the same model iMac I feel qualified to speak!
I would install the 10.4.11 combo updater first, then all the others. Note: just do one update at a time.
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
More information on using Software Updater here:
http://support.apple.com/kb/HT1338
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Missing effects installed yet not updating

Similar Messages

Maybe you are looking for