Missing email after "Black Screen" crash
I am missing a few thousand emails from various accounts after having a system crash. After rebooting and attempting to launch Mail, I received the following message-"You must free up space in your home folder before using Mail. Delete unneeded documents or move documents to another volume."
I went to my ~/library/mail file and moved the Envelope index to the desktop. I then relaunched Mail and allowed it to rebuild. I thought all was well until I really started looking at my accounts and realized many of emails were actually missing.
I then placed the original Envelope Index back into the Mail folder and relaunched Mail. The emails reappeared in the listing, but many of them were empty and yielded a message in the body of the email stating that the message needed to be downloaded from the server
I looked at the INBOX.mbox folders of the various accounts that are having issues and noticed that all of them have multiple "Messages" folders (one that says only "Messages" and a few more that have "Messages" followed by an alphanumeric string). Someof these folders have .emix files, some are empty.
The other thing I noticed is that the system moved files that were attached to the lost emails into the trash.
Can anyone give any insight as to where my emails may have disappeared to and how I may get them back?
It's just not the Envelop Index sometimes.
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Similar Messages
-
MOVED: Battlefield 4 black screen crash after intro
This topic has been moved to GAMING Graphics Cards.
https://forum-en.msi.com/index.php?topic=255512.0Quote from: laurent_csh on 16-May-15, 13:27:26
I've reinstalled, reset settings, lowered frequency, done about everything I could find online and same black screen crash.
Then I used an earlier save and... it WORKS!!!
Resolved!, somehow the latest save file seemed to get corrupt when reinstalling the graphics drivers...? Is that possible?
Thanks to all.
A number of people reported similar problems on other forums.
Resetting the settings or loading a save tended to fix the problems. No idea why.
Either way, glad it's fixed. Enjoy your computer! -
Battlefield 4 black screen crash after intro
Hi,
I've just upgraded from a Palit GTX 770 2Gb to a MSI GTX 970 Gaming 4G and Battlefield 4 which used to work absolutely fine on my old card now crashes everytime to black screen "Battlefield 4 has stopped working, an error has occured..." since I installed the MSI GTX 970 Gaming 4G.
I have the latest BIOS NV316MH.186 and latest NVIDIA 350.12.
I tried silent mode as I read someting about trying a lower frequency but same problem.
Other games are working great such as GTA V
Is there a fix? Can you help please?Quote from: laurent_csh on 16-May-15, 13:27:26
I've reinstalled, reset settings, lowered frequency, done about everything I could find online and same black screen crash.
Then I used an earlier save and... it WORKS!!!
Resolved!, somehow the latest save file seemed to get corrupt when reinstalling the graphics drivers...? Is that possible?
Thanks to all.
A number of people reported similar problems on other forums.
Resetting the settings or loading a save tended to fix the problems. No idea why.
Either way, glad it's fixed. Enjoy your computer! -
MacBook Pro (15-inch Early 2011) w/ML Black screen crash everyday since 1.69f4 SMC update
SInce the 1.69f4 SMC upadte installed though the App Store my Macbook has been randomly showing a black screen and the only way to get out of it is to hard reset. After that it takes a couple hours to get going again. Frequently when booting up after the black screen, the Apple logo and spinning ball disappear and it just sits on a white screen with the fan spinning like mad.
I have searched around and tried the SMC, PRAM and hdd disconnect but none of them seem to be a realible fix. It just fixes it self and boots normally when it feels like it.
I've read that black screen crashes can be a problem with the logic board but when it does boot it works perfectly ?? There is no log of any interruption in console or any sort of crash report. When it does restart there is no "your computer had a problem" message either.
Ive only had the laptop for <18months and its has never left my house, it stays docked to thunderbolt display so there cant be any physical damage.
Is there anyway to roll back the SMC firmware? it worked perfectly before this update now im losing 1-3 hours a day trying to get it started again.do you have any proof fir this trick, because mymackbook pro early 2011 never used SSD for system and stroage.
but i had replace hardisk from toshiba 500 GB 5400rpm to toshiba to 1 TB 7200 rpm were normal almost 1 years.but gettong problem at least 2 month ago .
thanks
everybody who's get try for this trick,please posting it. -
[SOLVED] GNOME starts into black screen, crashing after a minute.
This is happening after recently upgrading GNOME to 3.8 from 3.6. I attempted to downgrade, but it still refuses to start.
Here's the Xorg log.
[ 3050.246]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 3050.246] X Protocol Version 11, Revision 0
[ 3050.246] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 3050.246] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 3050.246] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
[ 3050.246] Build Date: 01 July 2013 10:48:42AM
[ 3050.246]
[ 3050.246] Current version of pixman: 0.30.0
[ 3050.247] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3050.247] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3050.247] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 28 14:09:23 2013
[ 3050.247] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3050.247] (==) No Layout section. Using the first Screen section.
[ 3050.247] (==) No screen section available. Using defaults.
[ 3050.247] (**) |-->Screen "Default Screen Section" (0)
[ 3050.247] (**) | |-->Monitor "<default monitor>"
[ 3050.247] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3050.247] (==) Automatically adding devices
[ 3050.247] (==) Automatically enabling devices
[ 3050.247] (==) Automatically adding GPU devices
[ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3050.247] Entry deleted from font path.
[ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3050.247] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3050.247] Entry deleted from font path.
[ 3050.247] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3050.247] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 3050.247] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3050.247] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3050.247] (II) Loader magic: 0x7fdc20
[ 3050.247] (II) Module ABI versions:
[ 3050.247] X.Org ANSI C Emulation: 0.4
[ 3050.247] X.Org Video Driver: 14.1
[ 3050.247] X.Org XInput driver : 19.1
[ 3050.247] X.Org Server Extension : 7.0
[ 3050.248] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3050.250] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 3050.250] Initializing built-in extension Generic Event Extension
[ 3050.250] Initializing built-in extension SHAPE
[ 3050.250] Initializing built-in extension MIT-SHM
[ 3050.250] Initializing built-in extension XInputExtension
[ 3050.250] Initializing built-in extension XTEST
[ 3050.250] Initializing built-in extension BIG-REQUESTS
[ 3050.250] Initializing built-in extension SYNC
[ 3050.250] Initializing built-in extension XKEYBOARD
[ 3050.250] Initializing built-in extension XC-MISC
[ 3050.250] Initializing built-in extension SECURITY
[ 3050.250] Initializing built-in extension XINERAMA
[ 3050.250] Initializing built-in extension XFIXES
[ 3050.250] Initializing built-in extension RENDER
[ 3050.250] Initializing built-in extension RANDR
[ 3050.250] Initializing built-in extension COMPOSITE
[ 3050.250] Initializing built-in extension DAMAGE
[ 3050.250] Initializing built-in extension MIT-SCREEN-SAVER
[ 3050.250] Initializing built-in extension DOUBLE-BUFFER
[ 3050.250] Initializing built-in extension RECORD
[ 3050.250] Initializing built-in extension DPMS
[ 3050.250] Initializing built-in extension X-Resource
[ 3050.250] Initializing built-in extension XVideo
[ 3050.251] Initializing built-in extension XVideo-MotionCompensation
[ 3050.252] Initializing built-in extension XFree86-VidModeExtension
[ 3050.253] Initializing built-in extension XFree86-DGA
[ 3050.253] Initializing built-in extension XFree86-DRI
[ 3050.254] Initializing built-in extension DRI2
[ 3050.254] (II) LoadModule: "glx"
[ 3050.254] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3050.254] (II) Module glx: vendor="X.Org Foundation"
[ 3050.254] compiled for 1.14.2, module version = 1.0.0
[ 3050.254] ABI class: X.Org Server Extension, version 7.0
[ 3050.254] (==) AIGLX enabled
[ 3050.255] Loading extension GLX
[ 3050.255] (==) Matched intel as autoconfigured driver 0
[ 3050.255] (==) Matched intel as autoconfigured driver 1
[ 3050.255] (==) Matched vesa as autoconfigured driver 2
[ 3050.255] (==) Matched modesetting as autoconfigured driver 3
[ 3050.255] (==) Matched fbdev as autoconfigured driver 4
[ 3050.255] (==) Assigned the driver to the xf86ConfigLayout
[ 3050.255] (II) LoadModule: "intel"
[ 3050.255] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3050.255] (II) Module intel: vendor="X.Org Foundation"
[ 3050.255] compiled for 1.14.2, module version = 2.21.12
[ 3050.255] Module class: X.Org Video Driver
[ 3050.255] ABI class: X.Org Video Driver, version 14.1
[ 3050.255] (II) LoadModule: "vesa"
[ 3050.256] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 3050.256] (II) Module vesa: vendor="X.Org Foundation"
[ 3050.256] compiled for 1.14.0, module version = 2.3.2
[ 3050.256] Module class: X.Org Video Driver
[ 3050.256] ABI class: X.Org Video Driver, version 14.1
[ 3050.256] (II) LoadModule: "modesetting"
[ 3050.256] (WW) Warning, couldn't open module modesetting
[ 3050.256] (II) UnloadModule: "modesetting"
[ 3050.256] (II) Unloading modesetting
[ 3050.256] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3050.256] (II) LoadModule: "fbdev"
[ 3050.256] (WW) Warning, couldn't open module fbdev
[ 3050.256] (II) UnloadModule: "fbdev"
[ 3050.256] (II) Unloading fbdev
[ 3050.256] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3050.256] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 3050.257] (II) VESA: driver for VESA chipsets: vesa
[ 3050.257] (++) using VT number 3
[ 3050.257] (WW) Falling back to old probe method for vesa
[ 3050.257] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3050.257] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3050.257] (==) intel(0): RGB weight 888
[ 3050.257] (==) intel(0): Default visual is TrueColor
[ 3050.257] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 3050.257] (**) intel(0): Relaxed fencing enabled
[ 3050.257] (**) intel(0): Wait on SwapBuffers? enabled
[ 3050.257] (**) intel(0): Triple buffering? enabled
[ 3050.257] (**) intel(0): Framebuffer tiled
[ 3050.257] (**) intel(0): Pixmaps tiled
[ 3050.257] (**) intel(0): 3D buffers tiled
[ 3050.257] (**) intel(0): SwapBuffers wait enabled
[ 3050.257] (==) intel(0): video overlay key set to 0x101fe
[ 3050.257] (II) intel(0): Output LVDS1 has no monitor section
[ 3050.257] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 3050.259] (II) intel(0): Output VGA1 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI1 has no monitor section
[ 3050.283] (II) intel(0): Output DP1 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI2 has no monitor section
[ 3050.283] (II) intel(0): Output HDMI3 has no monitor section
[ 3050.284] (II) intel(0): Output DP2 has no monitor section
[ 3050.284] (II) intel(0): Output DP3 has no monitor section
[ 3050.284] (II) intel(0): EDID for output LVDS1
[ 3050.284] (II) intel(0): Manufacturer: LGD Model: 2d8 Serial#: 0
[ 3050.284] (II) intel(0): Year: 2012 Week: 0
[ 3050.284] (II) intel(0): EDID Version: 1.3
[ 3050.284] (II) intel(0): Digital Display Input
[ 3050.284] (II) intel(0): Max Image Size [cm]: horiz.: 28 vert.: 16
[ 3050.284] (II) intel(0): Gamma: 2.20
[ 3050.284] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 3050.284] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 3050.284] (II) intel(0): First detailed timing is preferred mode
[ 3050.284] (II) intel(0): redX: 0.600 redY: 0.355 greenX: 0.334 greenY: 0.559
[ 3050.284] (II) intel(0): blueX: 0.149 blueY: 0.114 whiteX: 0.313 whiteY: 0.329
[ 3050.284] (II) intel(0): Manufacturer's mask: 0
[ 3050.284] (II) intel(0): Supported detailed timing:
[ 3050.284] (II) intel(0): clock: 75.2 MHz Image Size: 277 x 156 mm
[ 3050.284] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1478 h_blank_end 1582 h_border: 0
[ 3050.284] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 792 v_border: 0
[ 3050.284] (II) intel(0): LG Display
[ 3050.284] (II) intel(0): LP125WH2-SLB3
[ 3050.284] (II) intel(0): EDID (in hex):
[ 3050.284] (II) intel(0): 00ffffffffffff0030e4d80200000000
[ 3050.284] (II) intel(0): 00160103801c1078ea8855995b558f26
[ 3050.284] (II) intel(0): 1d505400000001010101010101010101
[ 3050.284] (II) intel(0): 010101010101601d56d8500018303040
[ 3050.284] (II) intel(0): 4700159c1000001b0000000000000000
[ 3050.284] (II) intel(0): 00000000000000000000000000fe004c
[ 3050.284] (II) intel(0): 4720446973706c61790a2020000000fe
[ 3050.284] (II) intel(0): 004c503132355748322d534c42330059
[ 3050.284] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 3050.284] (II) intel(0): Printing probed modes for output LVDS1
[ 3050.284] (II) intel(0): Modeline "1366x768"x60.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3050.284] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3050.284] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3050.284] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 3050.284] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3050.285] (II) intel(0): EDID for output VGA1
[ 3050.309] (II) intel(0): EDID for output HDMI1
[ 3050.309] (II) intel(0): EDID for output DP1
[ 3050.310] (II) intel(0): EDID for output HDMI2
[ 3050.310] (II) intel(0): EDID for output HDMI3
[ 3050.310] (II) intel(0): EDID for output DP2
[ 3050.310] (II) intel(0): EDID for output DP3
[ 3050.310] (II) intel(0): Output LVDS1 connected
[ 3050.310] (II) intel(0): Output VGA1 disconnected
[ 3050.310] (II) intel(0): Output HDMI1 disconnected
[ 3050.310] (II) intel(0): Output DP1 disconnected
[ 3050.310] (II) intel(0): Output HDMI2 disconnected
[ 3050.310] (II) intel(0): Output HDMI3 disconnected
[ 3050.310] (II) intel(0): Output DP2 disconnected
[ 3050.310] (II) intel(0): Output DP3 disconnected
[ 3050.310] (II) intel(0): Using exact sizes for initial modes
[ 3050.310] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 3050.310] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 3050.310] (II) intel(0): Kernel page flipping support detected, enabling
[ 3050.310] (==) intel(0): DPI set to (96, 96)
[ 3050.310] (II) Loading sub module "fb"
[ 3050.310] (II) LoadModule: "fb"
[ 3050.310] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3050.310] (II) Module fb: vendor="X.Org Foundation"
[ 3050.310] compiled for 1.14.2, module version = 1.0.0
[ 3050.310] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3050.310] (II) Loading sub module "dri2"
[ 3050.310] (II) LoadModule: "dri2"
[ 3050.310] (II) Module "dri2" already built-in
[ 3050.310] (II) UnloadModule: "vesa"
[ 3050.310] (II) Unloading vesa
[ 3050.310] (==) Depth 24 pixmap format is 32 bpp
[ 3050.310] (II) intel(0): [DRI2] Setup complete
[ 3050.310] (II) intel(0): [DRI2] DRI driver: i965
[ 3050.310] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 3050.311] (II) UXA(0): Driver registered support for the following operations:
[ 3050.311] (II) solid
[ 3050.311] (II) copy
[ 3050.311] (II) composite (RENDER acceleration)
[ 3050.311] (II) put_image
[ 3050.311] (II) get_image
[ 3050.311] (==) intel(0): Backing store disabled
[ 3050.311] (==) intel(0): Silken mouse enabled
[ 3050.311] (II) intel(0): Initializing HW Cursor
[ 3050.311] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3050.312] (==) intel(0): DPMS enabled
[ 3050.312] (==) intel(0): Intel XvMC decoder enabled
[ 3050.312] (II) intel(0): Set up textured video
[ 3050.312] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 3050.312] (II) intel(0): direct rendering: DRI2 Enabled
[ 3050.312] (==) intel(0): hotplug detection: "enabled"
[ 3050.336] (--) RandR disabled
[ 3050.346] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3050.346] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context
[ 3050.346] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3050.346] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3050.346] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3050.346] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3050.346] (II) AIGLX: Loaded and initialized i965
[ 3050.346] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3050.346] (II) intel(0): Setting screen physical size to 361 x 203
[ 3050.373] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3050.373] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3050.373] (II) LoadModule: "evdev"
[ 3050.373] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3050.373] (II) Module evdev: vendor="X.Org Foundation"
[ 3050.373] compiled for 1.14.2, module version = 2.8.1
[ 3050.373] Module class: X.Org XInput Driver
[ 3050.373] ABI class: X.Org XInput driver, version 19.1
[ 3050.373] (II) Using input driver 'evdev' for 'Power Button'
[ 3050.373] (**) Power Button: always reports core events
[ 3050.373] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3050.373] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3050.373] (--) evdev: Power Button: Found keys
[ 3050.373] (II) evdev: Power Button: Configuring as keyboard
[ 3050.373] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 3050.373] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3050.373] (**) Option "xkb_rules" "evdev"
[ 3050.373] (**) Option "xkb_model" "pc104"
[ 3050.373] (**) Option "xkb_layout" "us"
[ 3050.389] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 3050.389] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3050.389] (II) Using input driver 'evdev' for 'Video Bus'
[ 3050.389] (**) Video Bus: always reports core events
[ 3050.389] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 3050.389] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3050.389] (--) evdev: Video Bus: Found keys
[ 3050.389] (II) evdev: Video Bus: Configuring as keyboard
[ 3050.389] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 3050.389] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3050.389] (**) Option "xkb_rules" "evdev"
[ 3050.389] (**) Option "xkb_model" "pc104"
[ 3050.389] (**) Option "xkb_layout" "us"
[ 3050.390] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.390] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 3050.390] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3050.390] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3050.390] (**) Sleep Button: always reports core events
[ 3050.390] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 3050.390] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3050.390] (--) evdev: Sleep Button: Found keys
[ 3050.390] (II) evdev: Sleep Button: Configuring as keyboard
[ 3050.390] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 3050.390] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 3050.390] (**) Option "xkb_rules" "evdev"
[ 3050.390] (**) Option "xkb_model" "pc104"
[ 3050.390] (**) Option "xkb_layout" "us"
[ 3050.390] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3050.390] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.390] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 3050.390] (II) No input driver specified, ignoring this device.
[ 3050.390] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
[ 3050.391] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
[ 3050.391] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
[ 3050.391] (**) Wacom ISDv4 E6 Pen: always reports core events
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
[ 3050.391] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
[ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
[ 3050.391] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.391] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
[ 3050.391] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
[ 3050.391] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
[ 3050.391] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
[ 3050.391] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
[ 3050.391] (II) No input driver specified, ignoring this device.
[ 3050.391] (II) This device may have been added with another device file.
[ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
[ 3050.392] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
[ 3050.392] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
[ 3050.392] (**) Wacom ISDv4 E6 Finger: always reports core events
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
[ 3050.392] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
[ 3050.392] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
[ 3050.392] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
[ 3050.392] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
[ 3050.392] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
[ 3050.392] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
[ 3050.392] (II) No input driver specified, ignoring this device.
[ 3050.392] (II) This device may have been added with another device file.
[ 3050.392] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3050.392] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3050.392] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3050.392] (**) AT Translated Set 2 keyboard: always reports core events
[ 3050.392] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3050.392] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3050.392] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3050.392] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3050.392] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3050.392] (**) Option "xkb_rules" "evdev"
[ 3050.392] (**) Option "xkb_model" "pc104"
[ 3050.392] (**) Option "xkb_layout" "us"
[ 3050.393] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3050.393] (II) LoadModule: "synaptics"
[ 3050.393] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3050.393] (II) Module synaptics: vendor="X.Org Foundation"
[ 3050.393] compiled for 1.14.1, module version = 1.7.1
[ 3050.393] Module class: X.Org XInput Driver
[ 3050.393] ABI class: X.Org XInput driver, version 19.1
[ 3050.393] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3050.393] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3050.393] (**) Option "Device" "/dev/input/event11"
[ 3050.483] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3050.483] (**) Option "TapButton1" "1"
[ 3050.483] (**) Option "TapButton2" "2"
[ 3050.483] (**) Option "TapButton3" "3"
[ 3050.483] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 3050.483] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3050.483] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3050.523] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 3050.523] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3050.523] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3050.523] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3050.523] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3050.523] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3050.523] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 3050.524] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 3050.524] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 3050.524] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 3050.524] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 3050.524] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
[ 3050.524] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 3050.524] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 3050.524] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 3050.524] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 3050.524] (II) No input driver specified, ignoring this device.
[ 3050.524] (II) This device may have been added with another device file.
[ 3050.524] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 3050.524] (II) No input driver specified, ignoring this device.
[ 3050.524] (II) This device may have been added with another device file.
[ 3050.524] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 3050.524] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 3050.524] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 3050.524] (**) ThinkPad Extra Buttons: always reports core events
[ 3050.524] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 3050.524] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 3050.524] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 3050.524] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 3050.524] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 3050.524] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 3050.524] (**) Option "xkb_rules" "evdev"
[ 3050.524] (**) Option "xkb_model" "pc104"
[ 3050.524] (**) Option "xkb_layout" "us"
[ 3050.673] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3050.673] (II) intel(0): Printing DDC gathered Modelines:
[ 3050.673] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3053.746] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3057.566] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3057.576] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3057.576] (II) intel(0): Printing DDC gathered Modelines:
[ 3057.576] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3057.604] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3057.604] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3057.604] setversion 1.4 failed
[ 3059.233] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 3145.715] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 3145.719] (II) intel(0): EDID vendor "LGD", prod id 728
[ 3145.719] (II) intel(0): Printing DDC gathered Modelines:
[ 3145.719] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 3145.747] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 3145.747] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3148.360] (II) evdev: ThinkPad Extra Buttons: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: TPPS/2 IBM TrackPoint: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) UnloadModule: "synaptics"
[ 3148.360] (II) evdev: AT Translated Set 2 keyboard: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Wacom ISDv4 E6 Finger: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Wacom ISDv4 E6 Pen: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Sleep Button: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Video Bus: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3148.360] (II) evdev: Power Button: Close
[ 3148.360] (II) UnloadModule: "evdev"
[ 3149.198] (EE) Server terminated successfully (0). Closing log file.
I'd appreciate any help I could get.
Last edited by erdi13 (2013-07-30 03:49:12)I tried entering GNOME with gdm.
Before gdm runs, it freezes at a black screen for about a minute, then flashes the "Oh No" screen. Afterward, it allows me to login. After logging in, it freezes on the grey background of gdm for another minute. Once it displays the "Oh No" screen, it takes me back to a black screen, repeating the cycle.
Also, I upgraded X11 at the same time as GNOME.
Edit: Here's a recent Xorg log, if it helps.
[ 23.867]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 23.868] X Protocol Version 11, Revision 0
[ 23.868] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 23.869] Current Operating System: Linux dash 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 23.869] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5acc63bb-de83-4282-bc5e-f89b0c21e8be ro quiet
[ 23.870] Build Date: 01 July 2013 10:48:42AM
[ 23.870]
[ 23.871] Current version of pixman: 0.30.0
[ 23.872] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.872] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.874] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 29 16:06:24 2013
[ 23.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.878] (==) No Layout section. Using the first Screen section.
[ 23.878] (==) No screen section available. Using defaults.
[ 23.878] (**) |-->Screen "Default Screen Section" (0)
[ 23.878] (**) | |-->Monitor "<default monitor>"
[ 23.878] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 23.878] (**) | |-->Device "Intel Graphics"
[ 23.878] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.878] (==) Automatically adding devices
[ 23.878] (==) Automatically enabling devices
[ 23.878] (==) Automatically adding GPU devices
[ 23.885] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 23.886] Entry deleted from font path.
[ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 23.886] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 23.886] Entry deleted from font path.
[ 23.886] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 23.886] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 23.886] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.886] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.886] (II) Loader magic: 0x7fdc20
[ 23.886] (II) Module ABI versions:
[ 23.886] X.Org ANSI C Emulation: 0.4
[ 23.886] X.Org Video Driver: 14.1
[ 23.886] X.Org XInput driver : 19.1
[ 23.886] X.Org Server Extension : 7.0
[ 23.886] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 23.888] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21db rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[ 23.889] Initializing built-in extension Generic Event Extension
[ 23.890] Initializing built-in extension SHAPE
[ 23.890] Initializing built-in extension MIT-SHM
[ 23.891] Initializing built-in extension XInputExtension
[ 23.891] Initializing built-in extension XTEST
[ 23.892] Initializing built-in extension BIG-REQUESTS
[ 23.893] Initializing built-in extension SYNC
[ 23.893] Initializing built-in extension XKEYBOARD
[ 23.894] Initializing built-in extension XC-MISC
[ 23.895] Initializing built-in extension SECURITY
[ 23.895] Initializing built-in extension XINERAMA
[ 23.896] Initializing built-in extension XFIXES
[ 23.896] Initializing built-in extension RENDER
[ 23.897] Initializing built-in extension RANDR
[ 23.897] Initializing built-in extension COMPOSITE
[ 23.898] Initializing built-in extension DAMAGE
[ 23.899] Initializing built-in extension MIT-SCREEN-SAVER
[ 23.899] Initializing built-in extension DOUBLE-BUFFER
[ 23.900] Initializing built-in extension RECORD
[ 23.900] Initializing built-in extension DPMS
[ 23.901] Initializing built-in extension X-Resource
[ 23.901] Initializing built-in extension XVideo
[ 23.902] Initializing built-in extension XVideo-MotionCompensation
[ 23.903] Initializing built-in extension XFree86-VidModeExtension
[ 23.903] Initializing built-in extension XFree86-DGA
[ 23.904] Initializing built-in extension XFree86-DRI
[ 23.904] Initializing built-in extension DRI2
[ 23.904] (II) LoadModule: "glx"
[ 23.905] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.909] (II) Module glx: vendor="X.Org Foundation"
[ 23.909] compiled for 1.14.2, module version = 1.0.0
[ 23.909] ABI class: X.Org Server Extension, version 7.0
[ 23.909] (==) AIGLX enabled
[ 23.910] Loading extension GLX
[ 23.910] (II) LoadModule: "intel"
[ 23.910] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.916] (II) Module intel: vendor="X.Org Foundation"
[ 23.916] compiled for 1.14.2, module version = 2.21.12
[ 23.916] Module class: X.Org Video Driver
[ 23.916] ABI class: X.Org Video Driver, version 14.1
[ 23.916] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 23.917] (++) using VT number 1
[ 23.920] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.920] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.920] (==) intel(0): RGB weight 888
[ 23.920] (==) intel(0): Default visual is TrueColor
[ 23.920] (**) intel(0): Option "AccelMethod" "sna"
[ 23.920] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 23.920] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 23.920] (**) intel(0): Framebuffer tiled
[ 23.920] (**) intel(0): Pixmaps tiled
[ 23.920] (**) intel(0): "Tear free" disabled
[ 23.920] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 23.920] (II) intel(0): Output LVDS1 has no monitor section
[ 23.920] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 23.920] (II) intel(0): Output VGA1 has no monitor section
[ 23.920] (II) intel(0): Output HDMI1 has no monitor section
[ 23.920] (II) intel(0): Output DP1 has no monitor section
[ 23.920] (II) intel(0): Output HDMI2 has no monitor section
[ 23.920] (II) intel(0): Output HDMI3 has no monitor section
[ 23.920] (II) intel(0): Output DP2 has no monitor section
[ 23.920] (II) intel(0): Output DP3 has no monitor section
[ 23.920] (II) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 23.920] (==) intel(0): DPI set to (96, 96)
[ 23.920] (II) Loading sub module "dri2"
[ 23.920] (II) LoadModule: "dri2"
[ 23.920] (II) Module "dri2" already built-in
[ 23.920] (==) Depth 24 pixmap format is 32 bpp
[ 23.926] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 23.926] (==) intel(0): Backing store disabled
[ 23.926] (==) intel(0): Silken mouse enabled
[ 23.926] (II) intel(0): HW Cursor enabled
[ 23.926] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.928] (==) intel(0): DPMS enabled
[ 23.928] (II) intel(0): [DRI2] Setup complete
[ 23.928] (II) intel(0): [DRI2] DRI driver: i965
[ 23.928] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.928] (==) intel(0): hotplug detection: "enabled"
[ 23.929] (--) RandR disabled
[ 23.956] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.956] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.956] (II) AIGLX: enabled GLX_ARB_create_context
[ 23.956] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 23.956] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 23.956] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.956] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.956] (II) AIGLX: Loaded and initialized i965
[ 23.956] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.958] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
[ 23.980] (II) intel(0): Setting screen physical size to 361 x 203
[ 24.028] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 24.028] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.028] (II) LoadModule: "evdev"
[ 24.028] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.031] (II) Module evdev: vendor="X.Org Foundation"
[ 24.031] compiled for 1.14.2, module version = 2.8.1
[ 24.031] Module class: X.Org XInput Driver
[ 24.031] ABI class: X.Org XInput driver, version 19.1
[ 24.031] (II) Using input driver 'evdev' for 'Power Button'
[ 24.031] (**) Power Button: always reports core events
[ 24.031] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 24.031] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 24.031] (--) evdev: Power Button: Found keys
[ 24.031] (II) evdev: Power Button: Configuring as keyboard
[ 24.031] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 24.031] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 24.031] (**) Option "xkb_rules" "evdev"
[ 24.031] (**) Option "xkb_model" "pc104"
[ 24.031] (**) Option "xkb_layout" "us"
[ 24.045] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 24.045] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 24.045] (II) Using input driver 'evdev' for 'Video Bus'
[ 24.045] (**) Video Bus: always reports core events
[ 24.045] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 24.045] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 24.045] (--) evdev: Video Bus: Found keys
[ 24.045] (II) evdev: Video Bus: Configuring as keyboard
[ 24.045] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 24.045] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 24.045] (**) Option "xkb_rules" "evdev"
[ 24.045] (**) Option "xkb_model" "pc104"
[ 24.045] (**) Option "xkb_layout" "us"
[ 24.046] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.046] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 24.046] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 24.046] (II) Using input driver 'evdev' for 'Sleep Button'
[ 24.046] (**) Sleep Button: always reports core events
[ 24.046] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 24.046] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 24.046] (--) evdev: Sleep Button: Found keys
[ 24.046] (II) evdev: Sleep Button: Configuring as keyboard
[ 24.046] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 24.046] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 24.046] (**) Option "xkb_rules" "evdev"
[ 24.046] (**) Option "xkb_model" "pc104"
[ 24.046] (**) Option "xkb_layout" "us"
[ 24.046] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 24.046] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.046] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 24.046] (II) No input driver specified, ignoring this device.
[ 24.046] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event8)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event9)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/event12)
[ 24.047] (**) Wacom ISDv4 E6 Pen: Applying InputClass "evdev tablet catchall"
[ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Pen'
[ 24.047] (**) Wacom ISDv4 E6 Pen: always reports core events
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: Device: "/dev/input/event12"
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Vendor 0x56a Product 0xe6
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found x and y absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Pen: Found absolute tablet.
[ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: Configuring as tablet
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: YAxisMapping: buttons 4 and 5
[ 24.047] (**) evdev: Wacom ISDv4 E6 Pen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.047] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input12/event12"
[ 24.047] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Pen" (type: TABLET, id 9)
[ 24.047] (II) evdev: Wacom ISDv4 E6 Pen: initialized for absolute axes.
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) keeping acceleration scheme 1
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration profile 0
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration factor: 2.000
[ 24.047] (**) Wacom ISDv4 E6 Pen: (accel) acceleration threshold: 4
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Pen (/dev/input/mouse1)
[ 24.047] (II) No input driver specified, ignoring this device.
[ 24.047] (II) This device may have been added with another device file.
[ 24.047] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/event13)
[ 24.047] (**) Wacom ISDv4 E6 Finger: Applying InputClass "evdev touchscreen catchall"
[ 24.047] (II) Using input driver 'evdev' for 'Wacom ISDv4 E6 Finger'
[ 24.047] (**) Wacom ISDv4 E6 Finger: always reports core events
[ 24.047] (**) evdev: Wacom ISDv4 E6 Finger: Device: "/dev/input/event13"
[ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Vendor 0x56a Product 0xe6
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute multitouch axes
[ 24.047] (II) evdev: Wacom ISDv4 E6 Finger: No buttons found, faking one.
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found x and y absolute axes
[ 24.047] (--) evdev: Wacom ISDv4 E6 Finger: Found absolute touchscreen
[ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: Configuring as touchscreen
[ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: YAxisMapping: buttons 4 and 5
[ 24.048] (**) evdev: Wacom ISDv4 E6 Finger: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.048] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input13/event13"
[ 24.048] (II) XINPUT: Adding extended input device "Wacom ISDv4 E6 Finger" (type: TOUCHSCREEN, id 10)
[ 24.048] (II) evdev: Wacom ISDv4 E6 Finger: initialized for absolute axes.
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) keeping acceleration scheme 1
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration profile 0
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration factor: 2.000
[ 24.048] (**) Wacom ISDv4 E6 Finger: (accel) acceleration threshold: 4
[ 24.048] (II) config/udev: Adding input device Wacom ISDv4 E6 Finger (/dev/input/mouse2)
[ 24.048] (II) No input driver specified, ignoring this device.
[ 24.048] (II) This device may have been added with another device file.
[ 24.048] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 24.048] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.048] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 24.048] (**) AT Translated Set 2 keyboard: always reports core events
[ 24.048] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 24.048] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 24.048] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 24.048] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 24.048] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 24.048] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 24.048] (**) Option "xkb_rules" "evdev"
[ 24.048] (**) Option "xkb_model" "pc104"
[ 24.048] (**) Option "xkb_layout" "us"
[ 24.048] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 24.048] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 24.048] (II) LoadModule: "synaptics"
[ 24.048] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 24.050] (II) Module synaptics: vendor="X.Org Foundation"
[ 24.050] compiled for 1.14.1, module version = 1.7.1
[ 24.050] Module class: X.Org XInput Driver
[ 24.050] ABI class: X.Org XInput driver, version 19.1
[ 24.050] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 24.050] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.050] (**) Option "Device" "/dev/input/event11"
[ 24.148] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 75)
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 129)
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 24.148] (**) Option "TapButton1" "1"
[ 24.148] (**) Option "TapButton2" "2"
[ 24.148] (**) Option "TapButton3" "3"
[ 24.148] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 24.148] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.148] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 24.188] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 24.188] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 24.188] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 24.188] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 24.188] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 24.189] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 24.189] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 24.189] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event14)
[ 24.189] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 24.189] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 24.189] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event14"
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 24.189] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 24.189] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 24.189] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event14"
[ 24.189] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[ 24.189] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 24.190] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 24.190] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[ 24.190] (II) No input driver specified, ignoring this device.
[ 24.190] (II) This device may have been added with another device file.
[ 24.190] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 24.191] (II) No input driver specified, ignoring this device.
[ 24.191] (II) This device may have been added with another device file.
[ 24.191] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 24.191] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 24.191] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 24.191] (**) ThinkPad Extra Buttons: always reports core events
[ 24.191] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 24.191] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 24.191] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 24.191] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 24.191] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 24.191] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[ 24.191] (**) Option "xkb_rules" "evdev"
[ 24.191] (**) Option "xkb_model" "pc104"
[ 24.191] (**) Option "xkb_layout" "us"
[ 24.612] (II) intel(0): EDID vendor "LGD", prod id 728
[ 24.612] (II) intel(0): Printing DDC gathered Modelines:
[ 24.612] (II) intel(0): Modeline "1366x768"x0.0 75.20 1366 1414 1478 1582 768 772 779 792 +hsync -vsync (47.5 kHz eP)
[ 178.286] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 289.940] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 289.940] (II) intel(0): switch to mode 1366x768 on pipe 0 using LVDS1
[ 289.974] (II) evdev: Wacom ISDv4 E6 Finger: Using mtdev for this device
[ 289.974] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 289.974] setversion 1.4 failed
[ 291.433] (II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by erdi13 (2013-07-29 20:19:11) -
Hi for the last few months my mbp seems to randomly crashing to black screen at seemingly unrelated times. Most frequent are after periods of sleep and sometimes when web pages such as youtube load. This crashing is getting more and more frequent and when it occurs only a hard reset with the power button has any effect. The screen goes completely black, no backlight, no keys work, the fans keep going and if there was a song/video playing it starts looping the last note/second of noise over and over until the laptop is reset. My worry is that if i take it to the apple store, it will decide not to crash on that day which would drive me insane as its been happening all the time.
I've sent lots of 'reports' off to apple and saved numerous panic reports, here is the latest one:
Interval Since Last Panic Report: 109511 sec
Panics Since Last Report: 4
Anonymous UUID: 83E37560-8776-403F-9196-2DE4E7ED912C
Thu Jan 8 00:30:35 2015
panic(cpu 1 caller 0x9d4c9b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7f369000 0x0a5480a2, D0, P2/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x4e6ea188 : 0x21b837 (0x5dd7fc 0x4e6ea1bc 0x223ce1 0x0)
0x4e6ea1d8 : 0x9d4c9b (0xbea28c 0xc5a800 0xbf8e60 0x0)
0x4e6ea278 : 0xaef608 (0x97f7404 0x9b5d004 0x100 0xcb42b6)
0x4e6ea2c8 : 0xae6601 (0x9b5d004 0x100 0x4e6ea2f8 0x9c4778)
0x4e6ea2f8 : 0x16c89a6 (0x9b5d004 0x100 0x438004ee 0x4e6ea308)
0x4e6ea438 : 0xb0e2b5 (0x9b5d004 0xaa45004 0x0 0x0)
0x4e6ea478 : 0x9dde7c (0x9b5d004 0xaa45004 0x0 0x0)
0x4e6ea518 : 0x9da55b (0x0 0x9 0x0 0x0)
0x4e6ea6c8 : 0x9dc58f (0x0 0x600d600d 0x702b 0x4e6ea6f8)
0x4e6ea798 : 0xc9feae (0xc1d0004a 0xbfef0033 0xbfef0034 0x857c)
0x4e6ea808 : 0xcaf734 (0xaeae400 0x983ea80 0x8 0x3)
0x4e6ea828 : 0xcd4322 (0x983ea80 0xb 0x4e6ea848 0x2345f4)
0x4e6ea858 : 0xcd4b3d (0xabcf000 0x0 0x4e6ea87c 0x0)
0x4e6ea888 : 0xcb4d79 (0xabcf000 0x7d729080 0x0 0x0)
0x4e6ea8d8 : 0xc76d0c (0x462af000 0x0 0x0 0x3)
0x4e6ea948 : 0xc7640f (0x462af000 0x0 0x2 0x3)
0x4e6ea978 : 0xc6c05f (0x462af000 0x0 0x2 0x4653a000)
0x4e6eaab8 : 0xca55d8 (0x4653a000 0x1 0x4e6eabcc 0x4e6eabc8)
0x4e6eab68 : 0xc67fe1 (0x4653a000 0x1 0x4e6eabcc 0x4e6eabc8)
0x4e6eabe8 : 0x56da06 (0x4653a000 0x0 0x4e6eae3c 0x4e6eac74)
0x4e6eac38 : 0x56e2a5 (0xcf6720 0x4653a000 0xa725088 0x1)
0x4e6eac88 : 0x56eb59 (0x4653a000 0x10 0x4e6eacd0 0x0)
0x4e6eada8 : 0x286638 (0x4653a000 0x10 0xa725088 0x1)
0x4e6ebe58 : 0x21dbe5 (0xa725060 0xbc195a0 0x1fd7e8 0x5d43)
0x4e6ebe98 : 0x210a86 (0xa725000 0x0 0xa9ec6c0 0xac6fce0)
0x4e6ebef8 : 0x216f84 (0xa725000 0x0 0x0 0x0)
0x4e6ebf78 : 0x295c57 (0x97d72e8 0x0 0x0 0x0)
0x4e6ebfc8 : 0x2a256d (0x97d72e4 0x1 0x10 0x97d44c4)
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.4.0)@0xc5c000->0xd12fff
dependency: com.apple.NVDAResman(6.4.0)@0x96e000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
com.apple.nvidia.nv50hal(6.4.0)@0x1592000->0x19a6fff
dependency: com.apple.NVDAResman(6.4.0)@0x96e000
com.apple.NVDAResman(6.4.0)@0x96e000->0xc5bfff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x928000
dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x93f000
BSD process name corresponding to current thread: WindowServer
Mac OS
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0xfa120000 / 4
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000 / 3
------------end----------
Any information on why this is happening would be so so so appreciated as losing all your work in a blink of an eye is unbelievably rage inducing.
Thank you!You have the MacBookPro6,2—the Edsel of Macs. It may have the logic-board defect that was covered by a recall program that has now ended.
Residents of the EU may be entitled to warranty service for up to six years after purchase.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider, to have the machine tested. The routine hardware diagnostics used by service providers do not detect the fault. There is a specific test for this issue that Apple calls "VST" (for "Video Switching Test.") Ask for it. A "Failed" result means that the fault is present.
You may be quoted a price of about $300 (in the U.S.) for a "depot repair," which involves shipping the unit to a central repair facility and takes about two weeks. For that flat fee, anything found wrong with it should be fixed, not just the logic board.
Sometimes the replacement part is also defective, so be prepared for that possibility. If you decide to pay for a new logic board, test thoroughly during the 90-day warranty period on the repair. Some owners have reported that they went through as many as three replacement boards before getting one that worked.
If you don't want to pay for the repair, you may (or may not) be able to stop the panics by disabling automatic graphics switching. To use the discrete graphics processor, you'll need a third-party utility to switch to it manually.
Often the problems start after an OS upgrade. If the upgrade was recent, and you have backups, then you can revert to a previous OS X version. -
Msi 290x gaming - black screen crash
Hi
Recently i bought MSi 290x gaming . After a day i has got first black screen freeze. Only way to turn on computer was unplug it and connect again after 10-20 sec. I try to use different drivers but nothing helped. Sometimes pc worked fine for 2-4 days and them 3-5 crashes in hour. It never happened in a game . always in windows . I tried different psu and nothing change .
I tried msi afterburner , set voltage to constant. change gpu memory clock ..... but nothing changed :(
I make decision to RMA card to the shop but they just send me msg that everything was fine :( any ide what i should do ?
AMD fx-8350
Asus formula z
XFX Black Edition 850W Fully Modular 80+ Gold Power
2x 8GB 1866MHz DDR3 CL10 DIMM HyperX Fury Black Series
Now im running my old gtx 460 and everything looks fine :((
Any advice?
I should maybe try to sell card and buy something else like gtx970 but i just spend 270 pounds and im at least not happy .... huge disappointmentNot much to try then. Make sure bios of your board is latest and check general system stability with prime95: http://www.mersenne.org/download/
-
3 Dead Pixels after Blue Screen crash, should I make another Genius Bar appointment?
Ok, so yesterday I made a GB appointment, after a friend told me to, when I showed him that I had a dead pixel on my phone's screen. So when I got to apple, I showed them the dead pixel and they told me they were going to replace the screen on the phone. It turned out that the machine they use to do so, was down, so they ended up giving me a replacement phone. So I checked it out at the store and it looked fine. So now today, while running some errands, my new replacement iPhone had crashed and turned blue, then rebooted on me & a few moments after when I got back on the phone and was imessaging, I noticed 3 dead pixels instantly (one on right under the names of the contact on the message, on the J key on the board and to the middle-right where your send messages are displayed)
Now I'm thinking that, because my originally iPhone had crashed and turned blue also and I noticed the one dead pixel on it that same day, that the blue screen crashing could possibly be causing this??
Should I go back to the apple store and tell them what happened?(Update) the pixels actually all seem to be red, whenever I go on a yellow screen and I just noticed a fourth one. I think I should take my phone in
-
When I enter the command startx I get a black screen and then it crashes and returns to the command line. This has been happening ever since my compter turned itself off (I might have knocked it but I'm not sure), it was the first time it had been turned off since two updates. I have reinstalled the NVIDIA propriatery drivers and Xorg, tried a new xorg.conf, downgraded to nvidia 331.20.1 and installed nvidia-beta all to no avail(I don't wan't to use Nouveau because some Steam games don't work with it and it).
Xorg.0.log
xorg.conf
Linux 3.12.6-1-ARCH
NVIDIA 331.20.3
Xorg 1.14.5
Last edited by XxArcaneXx (2014-01-02 06:24:49)ewaller wrote:
Okay, You backgrounded the OpenBox session, then the rest of the script continues to run. Everything else, with the exception of xset, were backgrounded as well. When xset exits, the script ends and the X session closes.
Move the exec openbox-session & line to the last line of the script, and get rid of the '&' so that it does not background. When the OpenBox session eventualy ends, the script will complete and X will close
Thanks, it works now. I can't believe that I've had it like this for so long and it's worked unitl now. -
Black Screen Crash. Lion. Panics. Help
Since like a month ago my computer has been crashing to black screen. I have tried many things like repair persmissions and verifying disk but with no success so far. One of the things I notice is that the crash generally occurs when using something full screen (example: gesture for mision control or making an app full screen). I have reinstaled Lion to but doesnt seem to do anything at all.
I may upgrade to Montain Lion to see if that helps but i would like to know if anyone can help me.
Thanx for your time in advance.
Here ir the Error Problem report I get, maybe it can help.
Interval Since Last Panic Report: 48129 sec
Panics Since Last Report: 3
Anonymous UUID: EF3E4E24-542D-450C-B470-E766D0AE015F
Thu Oct 4 08:34:31 2012
panic(cpu 0 caller 0xffffff7f809dd007): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff809fb89000 0x0a5480a2, D0, P3/4
Backtrace (CPU 0), Frame : Return Address
0xffffff807c34ae10 : 0xffffff8000220792
0xffffff807c34ae90 : 0xffffff7f809dd007
0xffffff807c34af20 : 0xffffff7f80ad5b83
0xffffff807c34af80 : 0xffffff7f80ad5bf7
0xffffff807c34aff0 : 0xffffff7f80dd7855
0xffffff807c34b130 : 0xffffff7f80af9ddd
0xffffff807c34b160 : 0xffffff7f809e6d6a
0xffffff807c34b210 : 0xffffff7f809e243c
0xffffff807c34b400 : 0xffffff7f809e3668
0xffffff807c34b4d0 : 0xffffff7f81ec7a92
0xffffff807c34b5b0 : 0xffffff7f81ecb850
0xffffff807c34b620 : 0xffffff7f81ecbc6e
0xffffff807c34b6b0 : 0xffffff7f81ecc31f
0xffffff807c34b7d0 : 0xffffff7f81ec7e7e
0xffffff807c34b8f0 : 0xffffff7f81ee96ea
0xffffff807c34b930 : 0xffffff7f81ee9b1a
0xffffff807c34b950 : 0xffffff7f81efdba7
0xffffff807c34bac0 : 0xffffff7f81efdd88
0xffffff807c34bb10 : 0xffffff7f81efe938
0xffffff807c34bb50 : 0xffffff7f81ef321c
0xffffff807c34bb80 : 0xffffff7f81ed48ca
0xffffff807c34bbc0 : 0xffffff8000655575
0xffffff807c34bbe0 : 0xffffff8000656838
0xffffff807c34bc40 : 0xffffff8000656fbb
0xffffff807c34bd80 : 0xffffff80002a3f08
0xffffff807c34be80 : 0xffffff8000223096
0xffffff807c34beb0 : 0xffffff80002148a9
0xffffff807c34bf10 : 0xffffff800021bbd8
0xffffff807c34bf70 : 0xffffff80002aef10
0xffffff807c34bfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f809 76000->0xffffff7f80c71fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80964000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f8092b000
com.apple.nvidia.nv50hal(7.3.2)[38ACBB3D-4E3C-3883-9A4B-67F15592905F]@0xffffff7 f80c72000->0xffffff7f80f94fff
dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f809 76000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81e910 00->0xffffff7f81f53fff
dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f809 76000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80964000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f8092b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G56
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 602754373482
last loaded kext at 77231905485: com.apple.driver.AppleProfileTimestampAction 85.2 (addr 0xffffff7f81a18000, size 16384)
last unloaded kext at 140740495238: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f817ad000, size 65536)
loaded kexts:
com.apple.driver.AppleIntelProfile 85.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.ntfs 3.10.1
com.apple.driver.AudioAUUC 1.59
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AGPM 100.12.75
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.GeForce 7.3.2
com.apple.driver.AppleIntelHDGraphics 7.3.2
com.apple.driver.AppleIntelHDGraphicsFB 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleProfileTimestampAction 85.2
com.apple.driver.AppleProfileThreadInfoAction 85.2
com.apple.driver.AppleProfileRegisterStateAction 85.2
com.apple.driver.AppleProfileReadCounterAction 85.2
com.apple.driver.AppleProfileKEventAction 85.2
com.apple.driver.AppleProfileCallstackAction 85.2
com.apple.iokit.AppleProfileFamily 85.2
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK5055GSXF, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3Onnessa wrote:
I may upgrade to Montain Lion to see if that helps
That would not be advised. May make things worse.
You are experiencing a Kernel Panic as seen and described in Apple doc.#106227.
Bad or incompatible RAM is the most common cause of KP's. It could just need to be reset……. to make sure there's a good connection.
Here's a great site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here's a great MacFixIt article.
Good Luck! DALE -
Black screen when I go to Email.
What's up with that?There is another thread that I just used to fix this problem. While on the black screen, hold the sleep and the home button at the same time. The next screen that shows up gives you two options, ignore them until they disappear and the apple symbol shows up on the screen. release the two buttons and wait. This will force close the email, but will not harm or erase any data on your phone
-
Reinstall emailaccounts and emails after hard disk crash ?
Ist there a way to reinstall my email accounts and email after a hard disk crash ?
Have a backup available, but unfortunately not the email settings for the mail program, so i cannot do it via "backup".
How do I get my email accounts and emails (they are available in the library) back in the mail program.
If it is difficult doing it manually is there a program which can help?
Kind regards
ErnestThanks a lot for the quick reply, it was possible to reimport my emails in the Mail Program in Folders
called
Imported-1
Imported-2
Imported-3
Imported-4
Imported-5
now.
However by now I was not able to reimport the settings&rules of my 5 Mail-Accounts ... ??
(The must be saved somewhere on the systems)
So I have a lot of emails but no account by now.
(Of course 1 fake account to start the Mail program)
Thx for any input ...
Kind regards
Ernest -
i'm getting alot of crashing on safari (5/10 today) and 3rd party (4/4) apps since updating to 2.1
- on 3rd party apps im getting a random "black screen"
- on safari, its closing down by itself and going to the homescreen
<Edited by Moderator>Hi Tamara. Well I've been reading posts here over the past few days and lots of people are mentioning the "restore" process. My iPhone 3G is a week old so I havent got much data to loose to be fair (no exchange setup but will have to sync ocntacts!) so it's something that I could try out if the problems continue...
before i do that, i wanted to canvas opinion of others via this forum and gather some suggestions -
Qosmio X500 - Black screen crash when loading games, requiring reboot
I have a brand new Qosmio X500 (PQX33A-00X00J) with all the original drivers as they came out the box, and 64-bit Windows 7 Home Premium OS. The only thing I've done on this laptop is install games. The laptop runs fine for most things, and for a very few games (Unreal Tournament 2007 is the only one so far), but almost all games crash with a black screen the first time they're run. Sometimes I'll see a splash screen the first time, and once or twice I've got to a start screen, but thereafter the screen goes completely black, no sound, and the machine freezes requiring a reboot.
It's extremely frustrating, considering this is a brand new, out of the box gaming laptop, and I haven't changed any drivers or anything. It's running an Nvidia Geforce GTS 250M display card, and the native resolution for the LCD screen is 1920x1080. I suspect it may have something to do with the unusual native screen resolution or the aspect ratio, because I managed to get one game to run (FEAR) by going into the supplied config utility and setting the game's default screen resolution to 1024x768. FEAR has the same crash if set to a higher resolution.
The games I've tried:
Unreal Tournament 2007 - runs perfectly at all resolutions
Half Life 2 - crashes on launch with black screen, no sound, requiring reboot.
Counter Strike - the 1st time I managed to the setup screen, changed screen resolution, it crashed immediately. Thereafter it crashes straight away on launch, I can't even get to the setup screen. Uninstalled, reinstalled, same thing, crashes on launch with black screen, requiring reboot.
Bioshock - only ever got a "Bioshock" logo, then crashes with black screen, requiring reboot.
Frontlines - Fuel of War - crashes on launch with blank screen, requiring reboot.
Call Of Duty 4 - Modern Warfare - crashes immediately on loading with black screen, requiring reboot.
Crysis - crashes immediately on loading with black screen, requiring a reboot.
Except for UT 2007, almost every game has just crashed the first time it's been run, I usually don't even get a 1st shot at trying to change any settings. I've tried loading the games that provide a safe mode in that (e.g. Modern Warfare), but the same thing happens. I've also tried setting the laptop resolution to 1024x768 before running the games, but no difference. I've also made sure I'm running the latest patched version of the games, and I've checked the Toshiba website, but there are no driver updates so far that I can find for this laptop either.
I'm completely pulling my hair out, and solving this is very time consuming, because every time I try anything I have to reboot before I can try something else. Any help or ideas would be greatly appreciated.Someone suggested I try turning off my antivirus, and it turns out that was the problem. It seems Comodo has compatibility problems with games in Windows 64-bit editions since one of their latest releases.
-
GTX750 2GC OC black screen / crashes
Recently purchased this gpu N750-2GD5/OC and i'm experiencing random black screens and crashes using different versions of nvidia drivers i tried the card on 2 different systems with every driver on the nvidia site starting from 334.89 to 347.25
Some drivers respond better some worse but the problems are the same for example the 347.09 driver will give me continuous black screens which last about 3-4 seconds making every game unplayable
Some other when the pc wakes from sleep mode will give me the black screens and low fps
And lastly i believe 344.75 made every game crash when i start them
I uninstalled every driver using ddu uninstaller nothing is overclocked and checked the pc's for stability problems running prime95 - memtest and msi kombustor for stress test which the card run fine for up to 2 hours
Overheating is not an issue with my setup checked temperatures constantly
Currently i reside on 344.60 which gives me issues only when the pc's return from sleep mode
The systems i tried the card are this:
cpu : athlon 860k
mobo : asus a88xm-a
ram : 8gb 1866 kingston
psu : seasonic g450
os : w7 ultimate x64 (fresh install)
notes : everything is up to date mobo bios and drivers
second system :
cpu : phenom 955 (no oc just so i can test the card)
mobo : dfi 790fxb-m3h5
ram : g.skill 1333 8gb
psu : ocz zt650
os : w7 ultimate x64 (fresh install)
Any clues ?
thanks in advanceYou have tested your card with different pc, and it still crash. The problem must with your card, better RMA it if it is still under warranty.
Maybe you are looking for
-
I have pse elements7 and am unable to access learn more on the introduction of help topics on edit. Can anyone help.
-
File to File scenario using NFS.
Hi All, I am learning XI and got stick in a relatively simple issue. I am creating a scenario wherein a file from a directory on local machine say (D:/xi_input) is transferred to a directory on local machine only (say D:/xi_output). I guess this scen
-
OEPE Release 11gR1 (11.1.1.4.0) doesn't work with WLS 10.3.4
Hello All, The OSB Release 11gR1 (11.1.1.4.0) doesn't install with WLS 10.0, and it seems to be installed sucessfully with WLS 10.3.4. Now, when trying to create a server in OEPE Release 11gR1, it complains as it requires WLS 10.0 binary!! Big confus
-
Storing .jsp files in the web-inf directory
Has anyone ever heard about storing JSP files in the web-inf directory instead of the web app root directory. Apparently it improves security. If this is so, how is the user suppose to access the jsp file since I thought that users were not able to a
-
Final Cut Crashes on startup "GNX4 editor" shows in info window
I recently bought Final Cut Express 4 - I had used Final Cut Studio on an identical machine at work (that was running OS 10.4) and it worked fine. The installation went perfectly, but when I try to launch the application, it loads almost completely -