Missing emails on imap server after mavericks

Im not using Gmail so cannot follow instructions via their missing mail link.
My mail is on Dreamhost, i didnt back up before the update as it was my laptop it automatically updated to Mavericks.
ANyone have any iea on how to try find missing emails for dreamhost account please.
Im missing everything out and in from the past 12 months
Thank you

I had this issue too and it took me a while but found how to do it:
When you delete emails they are put to Deleted folder (you can find it from folder list of that email account).
Go to the Deleted folder and empty it (trash can icon at the bottom bar) then tap on sync icon.
BANG! Removed from the server!

Similar Messages

How to keep your email on the server after deleting from the phone?

how to keep your email on the server after deleting from the phone?

If this is a POP mail account:
Settings > Mail.... > Your account > Advanced > Delete from server > Never.
However, this will risk re-downloading as new mail
IMAC accounts mirror what's on the phone in the server, so deleting from the inbox on the phone will either send it to the trans folder on the server or leave it in the inbox but marked as deleted (depending on the server)
Settings > Mail.... > your account > Advanced > Deleted Mailbox > On My iPhone Trash

Error message cannot connect to IMAP server after 31.4.0 upgrade installed

After automatic security upgrade 31.4.0, I get an error message "IMAP server has disconnected. The server may have gone down or there may be a network problem."
No problems until the upgrade.
It is a Mac Mini running 10.7.5
My Mac laptop without the upgrade works fine.

Restart the router and the broadband device, if they're separate. If there's no change, see below.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

How can i restore all my emails from time machine after mavericks installation?

ALL of my emails disappeared from all my mailboxes after Mavericks was installed. When I try to restore from external Time Machine from earlier yesterday, for example, nothing happens. Can anyone help me with this huge problem?

Another one that Apple doesn't make obvious.
See #E3 in Time Machine - Troubleshooting.

Email Setup: IMAP Server not responding

Hi,
I just got an iPhone and am trying to set up my Yahoo email account. I've tried multiple times and failed. The error message I'm receiving is "The IMAP server 'apple.imap.mail.yahoo.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server Field".
I didn't have to enter any info for the incoming mail server (nor is there an option for it). Also, my phone's WiFi is working so I'm not sure what the problem is.
Thanks!

https://discussions.apple.com/message/5315446

Cannot send or receive email through Verizon server after Thunderbird update

After updating Thunderbird, Verizon server no longer recognizes my password, so authentication keeps failing. I can neither send nor receive email. Account settings are correct. Any ideas? Thanks.

Are your server settings set to
Server pop.verizon.net
Port 995
Connection security SSL

Missing data in SQL server after using EVSND

Dear all,
I am using BPC 5.1
I am trying to send data to BPC server using EVSND and the message indicated that data transfer is a success.
However when i tried to use Microsoft SQL Server Management Studio to query the relevant data line from tblfactfinance, it's simply not there.
Any idea?
Cheers

Hi,
Halomoan is right, you will find the Data in tblFactWBFinance.
BPC uses 3 Database Tables to store the Data.
tblFactAPPNAME as Longterm storage (MOLAP)
tblFac2APPNAME as Shorttern storage (ROLAP i think)
tblFactWBAPPNAME as Real-Time Storage (ROLAP)
If you send Data via Inputschedule only the different to the value in Longterm Storage is stored in the Writeback table. For example if you have a value of 100$ entered in the System and the cube is optimized the 100$ is moved to tblFactAppname.
After changing the value to 80$ via Inputschedule a record is generated in the Writeback Table with a value of -20$.
Processing the Cube will merge these 2 records to the Facttable (facttable 80$, WritebackTable empty)
Look in the Admin Help, Keyword "Write Back" and you will find a detailed description about Processing Options and storage.
Regards
Jörg

Missing url share in safari after mavericks

I couldnt see share url part while using Safari after install Mavericks how can i see it?I checked menu,reading list etc.but there is nothing.

Hello seymassa
I know the article is not for the latest version of Safari, but if you go to the drop down menu View > Customize Toolbar… you should be able to add the Share button back in if it does not show up so you can share the link of a webpage.
Mac Basics: Safari 5.1
http://support.apple.com/kb/HT4550
Regards,
-Norm G.

Leaving emails on the server

Is there any way to leave my emails on the server so that if I read them on the iPhone 3 GS I can still download them later on my computer using Windows Live mail? There are two accounts I want to be able to do this for - one is IMAP, the other POP.
Thanks

IMAP accounts ALWAYS leave emails on the server - what you see on the phone/device is a mirror of what's on the server.
POP accounts are not designed for multple cliets. Some POP servers can be configured to keep a copy of the email on the server after being dowloaded to a client, but then you risk redowloading deleted email as deleting occurs only on the client device. Not all POP servers can be configured to do this.

Deleting emails on the server..is that possible?

Good Morning:
I have a new iPod touch and 3 (long sad story) email accounts. One is a ,mac account, one is a gmail account and one is a POP account.
I have tried fussing with the settings for two weeks now and I am close to giving up.
I need my iPod Touch to delete the email from the servers when it downloads it or when I delete it from the iPod. It doesn't matter which as long as it does not stay on the server to be downloaded to my computer later as "new" email. I can't seem to make it work that way. No matter what, the email appears on my computer as a "new" email.
I am going to be traveling for over a month and would like to be able to read my email once and not have to sort 6 thousand messages when I get back.
What are the appropriate setting combinations to make this work?
I thought I was a pretty savvy guy, but apparently not.
Thanks for any instructions or help y'all can offer.

I found the answer, not here but by pestering an Apple representative I know. As an aside, he was a bit confused as well. He called in his "team" and we got an answer.
It turns out that even POP accounts are asked when to delete the messages off the server and the Touch treats POP accounts a bit like an IMAP account. If you tell it to remove deleted emails off the server after one day, which is as close as the Touch comes to behaving like a POP account and pulling messages off the server immediately, it will remove them after one day, not immediately, like a typical POP connection.
If I pull email from my POP account to the Touch on Monday morning and delete it on the Touch, it will be there for my laptop to pull and remove from the server Monday afternoon, but by Tuesday, the laptop wouldn't see it. Does that make sense?

Read IMAP server from Oracle PL/SQL

Hi,
Is it possible to read emails (either through IMAP) and save those email (with attachments) into oracle tables through pl/sql?
I have a requirement of reading mailbox every 1 min and save new mails into database.
My Environment: Database 10g.

This may help you.
Re: Retrieve emails from IMAP server
http://plsqlmailclient.sourceforge.net/

IFS1.1 and IMAP Server

Hi,
I am new to iFS1.1 and I am trying to set up the iFS environment. We have succesfully installed iFS and we have even created users in the system through the iFS manager. Now, we want to use the email facilities.
I have an instance of IMAP server running names IMAPserver. How do i send and receive emails.
I beleive that we can use the Netscapse navigator 4.7 to access the emails usingthe IMAP server. But i am not able to set this up with the email client.
I gave the name of the incoming IMAP server as
imapserver.cdr.com (where cdr.com is equivalent of yourcompany.com). But once i d this, the netscape messenger is saying that unable to connect to sever. it may either be busy or down. Please let me know.
Additionally, I want to send emails out of the ifs to the outer world. How do i accomplish this. Should i install the sendmail email software.
Any pointers would be helpful.
Thanks
Ramna
null

Please see http://technet.oracle.com:89/ubb/Forum36/HTML/000058.html and let us know if you have more questions.

Delete emails from server after retrieving with IMAP protocol?

Hi,
I am using Mail as my email program and have set up my account with IMAP.
When I use the POP protocol, I get the option to 'Remove copy from server after retrieving message'. When I set up Mail with the IMAP protocol, there is no such an option. The result is that my server inbox is slowly filling up and I manually have to login on my server to delete older messages.
Is there a setting to automatically remove retrieved messages from my email server using IMAP?
Thanks for your help.
Erik

Dear Thomas,
Thanks for the clarification! Now I understand the mechanism.
Still I would like to know if there is a way to automatically remove retrieved messages from the e-mail server. Would it help to automatically move my incoming messages in INBOX to a different mailbox in Mail.app? How would I set this up?
Thanks for the response!
Erik

Emails without content, "IMAP server not responding", missing password etc.

I'm having heavy issues with the email app on my iP4.
It started yesterday when it showed up my inbox like this:
http://img689.imageshack.us/img689/6087/img0001zk.png
I rebooted without success.
All of a sudden it worked again when I checked about half an hour later.
Today in the noon the same error, but it stays the same for hours now.
I rebooted, switched off and on without success.
I deleted the IMAP account, rebooted, started to create the same account. Then I am asked if I want to configure the acc. without SSL (which is not needed), I say No and save the acc.
When I want to check my emails it says that there is no password configured, so I go into settings, set it up again (and I am sure that I set it right at first setup), check email again and get the message that the IMAP server of the acc. does not respond.
This is driving me nuts. I had this issue 2 or 3 weeks ago already and restored from a backup, after that it worked ok. Last week I installed everything from scratch, it took me 2 days to reconfigure my phone for my needs.
Maybe someone has an idea before I send my phone in...
PS: This applies to several email providers. On my wife's 3GS everything works fine.
Message was edited by: eyePH0NE

Hello,
I have been the same issue on my iPhone 4 since last saturday (01:34 A.M, Paris time).
My iPhone cannot sync anymore with my gmail account using IMAP protocol ! It has been working fine on different generations et now, it just won't !
All my other accounts work just fine and it's not related to some kind of wireless operator limitation.
I have googled this and found out that people are having the same issue. I tried everything but nothing solves it !
Any bugs causing this ?
Thanks for your feedbacks !

How to copy email messages between 2 accounts on IMAP server side

Hello,
I have a need that I'm not yet able to solve on my Mac Mini Server (OSX10.9.4 build 13E28 - Server 3.1.2 build 13S4517).
I have configured and started my Server with the IMAP Server that manage my emails domain; at the moment I have 8 accounts able to retrieve emails from the external ISP, send emails outside through the same ISP and manage locally the emails exchange. All it's working as good as well.
Now, caused by operative needs of the company, all the emails of a specific account should be copied/forwarded/duplicated (one of this solution would be indifferently accepted) to a different account. The second account isn't configured on the ISP site but only my Server and should be used as a something similar to a live-backup of the first account. This is necessary because the first account "can be / has to be" managed by a lot of people (we know that this behavior could be dangerous for the integrity of the mail repository but we can't do in a different way...) and so we need to create a second account that will be managed by the administrator only to handle in real-time possible recoveries...
Have someone ideas/suggestion about a standard way (i.e. I mean something already foreseen inside Maverick/Server app) that we can follow to configure the environment that I've described?
Thanks a lot for your help and support

Irina, I don't think the mail api is not really designed for that. To do things at the database level, you might want to look at streams to pump all changes over to an archive database.
However one thing to bear in mind is that if you are capturing changes in the user's mail folder then you do not have an authoritative record of all mail (just an archive of what actually made it into their folders (e.g. if they choose not to keep a sent copy, then you will not have it in your archive).
For this reason, true compliance archiving usually aims to intercept the smtp delivery process (either as an intermediate gateway or plugin to a gateway .. google for such products).
you would normally do this at your corporate smtp gateway. unfortunately, I don't believe you can internally intercept/hook the OCS smtp process with 100% reliability (e.g. via a trigger), so I'd suggest you look at external smtp solutions if you really need compliance archiving.
hth

Missing emails on imap server after mavericks

Similar Messages

Maybe you are looking for