Missing entries when synching from notes

When synching using bluetooth connetion witg Lotus notes version 7.0 a number of my calender entires so not transfer to the phone. Tech details:
Operating system:
- Microsoft Windows XP 32-bit Edition, Service Pack 2
- Language: English
- Language for non-Unicode programs: English
Bluetooth stacks:
- Microsoft (Version: 5.1.2600, Build: 2180)
- Broadcomm (Version: 5.0.1, Build: 2800)
Nokia PC Suite 6.85.14.1, American EnglishVersion 7.37.22.0
Some entries appear but not all ?

and what is the repeating pattern of those meetings that do not sync? Weekly? Daily? Monthly ? Biweekly? Those are patterns that are most likely supported by your phone
Message Edited by manta on 08-Apr-2008 08:53 PM

Similar Messages

Apple reminders do not disappear from "all" and "missed" view when dismissed from "today" view of notification center by marking the circle by the reminder. why is this?

Firstly, I really like the new reminders in iOS 7. However, I noticed that apple reminders do not disappear from "all" and "missed" view when dismissed from "today" view of notification center by marking the circle by the reminder. it requires me to take an extra step and click on "all" and then click the "x" to make it completely disappear and clear from notification center.
why is this? am i doing something from?

unfortunately, that does not address my question. your link describes how to clear the missed section of center. I know how to clear the missed section of notification center, as I said in the original question. I will re-peat my question to clarify. it is:
apple reminders do not disappear from "all" and "missed" view when dismissed from "today" view of notification center by marking the circle by the reminder. it requires me to take an extra step and click on "all" and then click the "x" to make it completely disappear and clear from notification center.
why is this? am i doing something wrong?
the behavior I would expect would be that when i click the circle on the "today" view. it would clear it out from the missed and all view so i would not have to clear in 2 areas.
I Hope this clarifies...

Not all photos appearing in ipad when synching from mac?

Not all my photos which I have synched from my MAC appear in the IPAD. Any ideas why?

Do you get any error message ? Have you tried deleting the photo cache from your computer and then re-trying the photo sync to see if they then copy over ? The location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

Missing Audio when Converting from MPEG1 Muxed to Ipod using QT Pro 7

I just got my video iPod over Christmas. After reading up on QT Pro 7, I purchased it over the weekend, and have attempted unsuccessfully the past two nights to convert home videos (taken with my Sony digital camera) to iPod format. My home movies play fine when I open them in Quicktime; however, when I export to the iPod format (and also when I export to mpeg4 format), I only get the video and not the audio.
I've confirmed that my key for QT Pro 7 is successfully loaded, so that's not the issue.
I've also confirmed that the format of the original video taken from my camera is "MPEG1 Muxed". Several internet discussion boards seem to indicate that missing audio is a common problem for people using Sony cameras and Quicktime. If this is the case, I'd prefer to simply refund my money and buy one of the other video to iPod converters available on the web.
So, either help me solve this problem, or help me get a refund. I'm fine either way.
-- Chief1Pat

QT does not export the sound when exporting from muxed mpegs (mpeg-1 or mpeg-2). QT Mpeg Limitations
You should be able to export both sound and video with this Windows freeware:
http://www.videora.com/en-us/Converter/iPod/

Recently, new downloads aren't appearing on iPhone when synching from iTunes

When I synch from the computer to iphone and ipad, my new downloads arent copying (and I have it set to compy complete library) and now some content isnt available....I found a way to share the libray with my computer, but I had to be on wifi with the same network. This is a recent problem...can anyone advise?

Hello there, evanevan.
The following Knowledge Base article provides some great insight into troubleshooting the issue you seem to be describing:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Although you're not getting the specific error message, the steps should help with resolving your issue:
Turn off the music or photo sync option in iTunes for the device.
Click Apply to sync the changes to the device.
Turn the music and photo sync options for the device on again.
Click Apply again to try to sync the device to iTunes.
If the 'Not enough free space' alert appears, continue to step 5.
Turn off the automatic syncing functions for the iOS device. To do this:
Select the iOS device from the iTunes window and click the Summary tab.
Deselect "Automatically sync when this device is connected" and select the "Sync only checked songs and videos" checkbox.
Click Apply to sync the changes to the device.
Reduce the amount of data that is being synced to the device and resync the device. For example, if syncing your Music library exceeds the memory capacity of the device, choose "Selected playlists" to transfer rather than "All songs and playlists" under the Music tab in iTunes.
If the 'Not enough free space' alert appears, continue to step 6.
Restore using iTunes.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

2540 printing problem, missing lines when printing from iPad

Bought a new 2540 to use with iPad, printing direct from wireless direct to printer and missing lines, tried copying and everything is working/printing ok. It just appears to be when printing from iPad. I have tried powering down printer and rebooting but still the same.
Any help appreciated.

Hey , Welcome to the HP Support Forum. I see that you're having what sounds like AirPrint quality issues with your HP Deskjet 2540 All-in-One Printer. I would like to assist. Your 2540 is AirPrint compatible, but not all app content and file formats are AirPrint friendly. I recommend installing the HP ePrint app. (I'm assuming you don't have WiFi if you're a wireless direct user. If that's the case try and visit a public space with WiFi and install the app there. Once installed you can use it within a wireless direct setup). Let me know if this helps. Thanks for reaching out and have a great day!

PDF has missing text when created from FM 9

My Software:
Windows XP Professional Version 2002 SP 3
FrameMaker 9.0p255
Adobe Acrobat 9 Pro Version 9.4.1
When generating a PDF document from FrameMaker, the PDF document has random missing text, including whole paragraphs, sentences and some text in tables. We have several FrameMaker books and they are all having the same issues. These books were fine when we last published updates within the last month and we have not made any changes to fonts.
When generating a PDF from FrameMaker, we always print the book to a postscript file first following these steps:
- Go to File > Print Book.
- Select the Adobe PDF printer.
- Select the Print to File option and specify a .ps filename.
- Select the Generate Acrobat Data option.
- Use Acrobat Distiller to convert the PS file to PDF.
Note that I also tried File > Save As PDF and got the same results.

Did you reboot after the hotfix? fwiw, other users on the forum have had difficulty with the hotfix not being installed correctly the first time around.
once you download the hotfix from MS you have to run the .exe, and then when it’s finished you have to reboot. Then check the Add or Remove programs in Control panel, and click the “show updates” button, then scroll way down to see the hotfixes, to be sure that #952909 is shown.
What fonts are you using in your documents? Specific type (PS, TT, OTF) and any other info you have (foundry, etc).
Do the "gaps" seem to occur when there are font changes in the document, e.g. when words in a sentence are bold or when a paragraph in a different weight (e.g. bold italic) follows, say, a "regular" text weight paragraph? As another test, can you highlight a segment of good+bad+good text in the PDF, do Control+c to copy it to the clipboard, then Control+v to paste it into a different file (Word, text editor, even another new FM document). Do the words of the "missing" text segments show up?
edit: the hotfix download process is a bit confusing; if I remember correctly it has to be requested, then MS sends a link to the download webpage, then the downloaded .exe has to be run.

Missing photos when importing from a Fuji s602zoom digital camera

I noticed that when I import the photos from my digital camera (as above), sometimes there are some missing. No error messages displayed and the import seems to finish OK.
This makes life difficult as I cannot now trust iPhoto and have to check every import.
Any suggestions would be helpful.

Neville:
On those occasions where the camera drops some photos are there any movies on the card?
A workaround is to use Image Capture to upload either to a folder on the Desktop first or directly into iPhoto. It's not recommended that you have iPhoto erase the card after import as there have been too many cases, yours for one, that have incomplete uploads and complete erasures.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Message was edited by: Old Toad

Missing MacintoshHD when upgrading from 10.4.11 to Leopard

I have an older mbp with tiger 10.4.11. When I open disk utility, I see the drive and MacintoshHD volume. When I try to upgrade to Leopard with the DVD disk, it boots, but when it shows the disks available to update, the MacintoshHD is not shown. If I open the Disk Utility on the Leopard DVD, no MacintoshHD volume. If I reboot to the local Tiger disk, I see the MacintoshHD volume again. Any suggestion on why this is happening and how I can resolve the issue?

I'd say you have a garbaged disk. Try this:
Repair the Hard Drive and Permissions
Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now see if you have success with Leopard. BTW, what is the source of your Leopard DVD?

Broken/missing images when copying from one project to another.

Greetings:
I've been building pages in RH project #1 by copying and
pasting text and images from a separate RH project #2. While
working in RH #1 all the images are there. When I publish, half of
them are not.
Doesn't RH automatically add copied and pasted files to the
project into which they are pasted?
If not, how do I get these images into the project so they
get published? It tried pasting them all into the FlashHelp folder,
where the other published files are, but this has had no effect.
More, I have to use this technique again and again (long
story ;-) so I really need to get this solved.
Thanks.
stevenjs

Just to get some clarification--you're saying that the
problem appears when you are generating your output from project
#2? Or just when you publish after generating from project #2?
My guess would be that you're copying the code for the image
but not the image itself. Try this:
1. Copy the entire folder of images from project #1 into the
project #2 directory.
2. Do your copying and pasting from project #1 into #2 like
you've been doing.
3. Generate from project #2 and see if the images show up in
the output.
I know you say you have reasons for copying and pasting, but
I just want to mention the possibility of importing topics instead,
which will copy everything over into project #2. But you've
probably already thought about that.
--Ben

Missing songs when transferring from old to new laptop

Hi
I have just moved my songs from old to new laptop. Unfortuantely it has not copied all of them over, when I try to play in itunes it asks me to locate them. I have checked what has copied over and it has definately left them off, problem is it's left off quite a lot. Was there something that I should have done on the old laptop before copying them to an external device?
sue

To do that, you need to go to "/Applications/System Preferences" then go to the "Accounts" prefpane, then click on the user you want to delete, then click on the minus button in the bottom left corner of the window, but make sure you are logged in as the good user to do this and that the good user is an administrator.

Missing contacts when copying from SIM

I have all my contacts stored on my SIM from my old RAZR. When I tried to transfer the contacts using the iPhone Settings->Mail-->Import, only some of my contacts get copied over. Has anyone else had this issue? Help!

I'd strongly recommend posting this question here (as well):
http://supportforums.blackberry.com/t5/Desktop-Software-for-Mac/bd-p/blackberryf ormac
Not a lot of Blackberry related discussions here so you might not get the answer you're looking for as the software is not owned/supported by Apple.

Missing artwork when xfer from PC to MAC - purchased music

So here is the story...
New iMAC... old PC... iPOD 80GB
All my music is music I either own or purchased through iTunes... ALL my album art was there on my PC and on my iPOD...
Since moving the library to the MAC... SOME of my album art is missing... and when I select to find album art... it says it cant find any... the thing is... its music I bought through iTunes... so I know there is album art available..
It has only happened to about... say maybe 20 or 30 songs / albums...
Any idea on how to get the album art back ??
I dont sync with the PC anymore... and have formatted the iPOD for MAC and it only syncs with my iMAC now.
Cheers

Geek to Live: How to move an iTunes library from a PC to Mac (and back)
http://lifehacker.com/software/itunes/geek-to-live--how-to-move-an-itunes-librar y-from-a-pc-to-mac-and-back-242468.php
Migrate Your iTunes Library from Windows to Mac (and keep your ratings, play counts and date added)
http://www.tunequest.org/migrating-your-itunes-library-from-windows-to-mac/20061 105/
HOWTO: Move your iTunes music while preserving library data (when you don’t let iTunes manage your music library)
http://hifiblog.com/past/2006/05/11/howto-move-your-itunes-music-while-preservin g-library-data-when-you-dont-let-itunes-manage-your-music-library/
Good luck,
Patrick

Missing € character when exporting from Indesign (CS4) to PDF

I think the subject line says it all. I'm not an expert user, but have not previously had
this problem. I get a new iMac with CS4 reinstalled
and now 'lose' the Euro character when I export my Indesign files to
PDF - does anyone have any advice please? Thanks.

Even so - I don't know why - but the problem is with some fonts that the Euro doesn't show.
I always use the Euro font for the Euro symbol and never have an issue.
Even if you do manage to get the Helvetica Euro to show up in the PDF there is a chance it can drop out at the RIP stage and not appear in print - I've seen it happen far too many times.
Euro font is your friend.

Missing elements when exporting from Illustrator to .dwg

Hi,
I am exporting our Illustrator files into .dwg -- as our client will accept them in .dwg format only.
There is one element that doesn't seem to transfer when exporting. It is a red circle in Illustrator, but when exported, it shows up as a black outlined circle. Any way to fix this in Illustrator so that it appears correctly in .dwg?
We have the same red circle in other projects, and when exporting, they show up in the .dwg perfectly. I tried to copy that red circle from another project and pasted it into my current project. I matched the properties with the eyedropper tool, but still, no red circle in .dwg.
I've included a screen shot of what is happening. This is the .dwg. You can see there is a black outlined circle next to the 'D' in the stairwell on the image. It is supposed to be a red circle. Below, in the empty space in the lower right corner, I copied and pasted another red circle from another project that is appearing fine in the .dwg.
Any help would be greatly appreciated!! Thank you!

Thread moved from Adobe Captivate forum.

Missing entries when synching from notes

Similar Messages

Maybe you are looking for