Missing events when searching Calendar

I am using Mountain Lion (10.8.5).
I entered an event on 13 January, 2015, and set it to repeat weekly until 24 March. All eleven are shown in Calendar, and all of them sync to my iPhone. But when, in Month view on the Mac, I type the events' name into the search field, the first 5 of them are not shown in the list in the right-hand sidebar.
Moreover they appear normal on screen until I search, but if the found events (not including the first 5) are displayed in the side-bar as a result of searching, these same five appear very pale in the Month view.
I reset the PRAM (twice, in fact) and also wanted to try resetting Open Firmware, but the instructions that I had obtained some time ago (as below) did not work.
Reset Open Firmware. Instructions for doing this are as follows:
--a-- Start up the computer while holding down Command (Apple), Option,
"O", and "F" keys.
--b-- At the command prompt type "reset-nvram", without the quotes,
then hit the return key.
--c-- At the prompt type "reset-all", without the quotes, then hit the
return key. The machine should reboot.
I should be very grateful for advice; the failure of the Search facility is quite serious.

Similar Messages

Ipad/Iphone calendars missing events from exchange calendar

I have an Iphone and Ipad, both using iCal. They're set up to sync with Exchange 2010 server. Somehow both devices are missing random events from the calendar. I can see them in the outlook 2010 calendar. I've already found a solution to fix this(Turn Calendar Syncing Off and On again to rebuild the calendar). What I'm looking for is a reason as to why this is occuring. Any Ideas would be greatly appreciated. I'm using the most recent IOS on both devices.(6.0.1)

I seem to have fixed it myself. Sorry for adding to the digital clutter.
After dismounting my iPhone, the clear history button was enabled. It then synched well.

Photos missing but when searching all photos in finder they are there

Not long ago i noticed that all my photos after july 20th were missing. The next thing that was there was an update i did just 2 days ago which was the end of august at the time. So almost 1 month was missing out of my iphotos photos. I didnt know what to do and 1 day my wife was searching for a photo that did not show up in iphoto but in the finder under all photos its there. The data file the original and the modified photo full size are all there. in the folder date they should be in.
I have tried rebuilding the iphoto database and nothing changes. I can open these photos in preview just fine i can email them to people i just can not see them in iphoto.
I deleted my entire ilife 08 and reinstalled it from the DVD. that did not change anything
I dont want to lose these photos but i cant figure out why they do not show in iphoto yet they are in the iphoto folder where they should be.

TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Missing events when i try to upload to the web

I just uploaded 2 events to iphoto 09, they are in iphoto and i can send the photos to facebook, but only through iPhoto. when i try to find the events to upload them to snapfish or even to just add them to an e-mail they are no where to be found. how can i fix this problem, the events and photos are n my computer but i cannot upload them because when i search for them they do not appear....

There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Missing events when importing

I have a corrupted iPhoto library so I exported all 64,000 photos to a folder on the desktop. I then created a new iPhoto library and imported them all back in. When done, they are all in one event - not split by day correctly. I checked preference settings and they are correct.
I've deleted the .plist file as well and then started again (new library, import) but still only shows one event for all 64,000 photos.
Any ideas?

Correct - exporting and reirting loses a lot including organization
You should have repaired your corrupted library - restore a backup of it and Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
Shot of that your remaining option its select the big event and use the autosplie selected event command
LN

Missing events when syncing iPhone 5 running 7.0.6 to Macbook running os 10.6.8

I have ios 7.0.6 on my iphone 5. I've noticed recently since the update that the events on my iPhone Calendar does not all sync to iCal on my MacBook running os 10.6.8. Some syncs, but a lot don't (and not calendar-specific either). I tried rebooting and syncing again, manual back up, selecting one calendar and syncing one and a time, but none worked. How do I fix this, and is there a way to make my iPhone calendar over-write the calendar in iCal?

I should mention that I am syncing with USB and not iCloud because I don't want my info on iCloud. Thanks!!

Outlook 2013 crashes when opening Calendar search result

I have a user who uses her Outlook 2013 calendar extensively, mainly to note for herself when she has spoken to a customer, and creating appointments for when she needs to speak to them again. (This is outside of our policy to note the contact in
MS CRM.) She can have scores of such Calendar items each day.
When seraching for these appointments in her Calendar, she gets the list of results, but Oulook crashes when she tries to open any of them. Sometimes Outlook restarts on its own, sometimes she must relaunch it herself.
Related threads reference a wwlib.dll error, but she is not getting that. It is Outlook.exe itself that is crashing. There are other threads that reference other open windows, or items containing webpages or tables, but these do not apply to her, either.
Event Data (two related entries) contain the following:
OUTLOOK.EXE
15.0.4551.1004
5253ad6f
c0000005
00025b09
19cc
01cef2a610938033
C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
C:\Program Files\Microsoft Office\Office15\OUTLOOK.EXE
77f5e493-5e9b-11e3-9ef4-00219b4a7172
And:
3915849571
1
APPCRASH
Not available
0
OUTLOOK.EXE
15.0.4511.1004
5253ad6f
OUTLOOK.EXE
15.0.4551.1004
5253ad6f
c0000005
00025b09
C:\Users\[username]\AppData\Local\Temp\163947659.cvr C:\User\[username]\AppData\Local\Temp\CVR780F.tmp.cvr
C:\Users\[username]\AppData\Local\Temp\WERA546.tmp.WERInternalMetadata.xml
C:\Users\[username]\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_OUTLOOK.EXE_2e80497b46642ed3f64262bb26bbba2f6ecc_02d1bdd5
0
77f5e493-5e9b-11e3-9ef4-00219b4a7172
0
On answers.microsoft.com, Girish M (Support Engineer who eventally directed me here), asked me to run Scanpst.exe. I would paste the results here, but this window does not seem to allow pasting. A summary description of what it found on her .ost file (no
.pst in use) is basically this:
**Beginning NDB recovery
**Attempting to open database
**Attempting to validate header
**Attempting to validate AMap
**Attempting to validate BBT
**Attempting to validate NBT
**Attempting to validate BBT refcounts
    ??Couldint find BBT entry in the RBT (E025CC)
**Attempting to validate header NID high-water marks
**Beginning PST/OST recovery
**Attempting to recover all top-level objects
    **Store created by biuld: 15.4517
**Attempting to walk all folders
      Failed to add row to the FLT, RowID = 719
      Failed to add row to the FLT, RowID = 6CD
      Failed to add row to the FLT, RowID = 6DE
      Failed to add row to the FLT, RowID = 6D8
and so on, and so on, with a few hundred more FLT RowID errors, finally ending with:
**Attempting to locate any orphaned folders/messages
**Performing Final HMP validation
**Attempting to check top-level objects for consistency
**Updating folder hierarchy
  **Verifying message moves
My understanding of the Scanpst.exe process is that it also disables any addons which might cause crashing, but the issue is still being experienced. Running Scanpst.exe a second time (appending the previous log, although it seemed to actually prepend the
file) only returned a few lines from the top of the result above ending with "Attempting to validate BBT."
Fixes not attempted yet that I have found performing searches include running the Office Repair tool, or checking for KB2817631 (a Word update that is apparently having adverse affects on Outlook, not attempted yet because it seems to be related to the wwlib.dll
error, which is not happening here).
Any thoughts out there? Thanks!

Mavis,
Thanks for the reply. Running Outlook using /cleansharing and
/cleanroamedprefs did not have any effect when used individually or in combination with each other.
Running the Search Index Rebuild option also did not seem to do anything, as the pop-up message indicated that it may take a long time to finish, and yet seemed to finish instantaneously, not giving any indication that the indexing took place. The option
window immediately said "Indexing complete" for 23,755 items.
As to the Outlook Forum, they are the ones who directed me to this forum (you can see the thread on the Answers support page under Office - Office 2013 - Microsoft Office Outlook - Office on Windows 7, under the title "Outlook 2013 restarts when
opening Calendar Search result item" first posted on Dec 11, 2013), as Girish M felt that it might be due to Exchange, and not Outlook. (I have no reports of any of our other users on the same Exchange server having the problem with their Outlook, but
they also do not use it the way this user has been.)
I can repost the issue there, or continue the same thread, if you think the issue lies with them. Was the "Answers" site the improper place to post, perhaps? Should it go in a different thread on Technet instead?
Thanks for your assistance!
Edited to add:
Here are the KBs installed just before or on the date the problem started (12/6/2013):
12/5/2016 (Office updates, all 32-Bit):
Security Update Office 2013 KB2768005
Office 2013 KB2768016
Office 2013 KB2817640
Office 2013 KB2827228
Security Office 2013 KB2837618
Word 2013 KB2817631
InfoPath 2013 KB2752078
Office 2013 KB2817493
Office 2013 KB2760539
Office 2013 KB2827235
Office 2013 KB2827225
Security Excel 2013 KB2827238
Office 2013 KB2760242
Office 2013 KB2817626
Office 2013 KB2817314
Office 2013 KB2760610
Access 2013 KB2768008
Office 2013 KB2738038
SkyDrive Pro KB2825633
Security Office 2013 KB2817623
Office 2013 KB2760267
Visio Viewer 2013 KB2768338
Office 2013 KB2827230
OneNote 2013 KB2810016
Office 2013 KB2827228
Office 2013 KB2767845
Definition Office 2013 KB2760587
Office 2013 KB2726996
Security Office 2013 KB2810009
Office 2013 KB2817316
Word 2013 KB2817631
Lync 2013 KB2817621
Office 2013 KB2760224
Office 2013 KB2726954
Office 2013 KB2817640
Publisher 2013 KB2752097
PowerPoint 2013 KB2817625
Office 2013 KB2760257
Office 2013 KB2817309
Security Outlook 2013 KB2837618
Visio 2013 KB2752018
Office 2013 KB2817490
Word 2013 KB2827218
Office 2013 KB2760553
12/6/2013 (for Windows, all Security):
KB2900986
KB2888505
KB2876331
KB2868725
KB2868626
KB2862152
I listed all updates because there have been reported instances of a Word update causing Outlook to crash, but she is not getting the wwlib.dll error related to that KB. If you are aware of any issues with these updates, and which ones might be worth uninstalling
in an attempt to fix, please let me know.
Thanks again!

IOS 5 iPhone duplicating some calendar events when iCal events on iMac have no duplicates

I've searched in vain on these forums but can't find a problem quite like mine. I am running
- iPhone 4 with iOS 5.0.1
- iMac with Lion OS X 10.7.2
I was using iCloud for all my calendars but found that my phone battery was draining very quickly, so decided to go back to using the iMac to sync to all devices. I exported all my calendars (seven of them) from iCloud through iCal/File/Export/Export, and then imported them as new calendars. I deleted my iCloud account on my phone and iCal. I then synced from iMac to iPhone and all went perfectly, except for my primary calendar (typical...).
All events for all calendars appear perfectly in iCal on the iMac. But my primary calendar, on my iPhone only, has duplicated nearly all the events in it. There doesn't seem to be any pattern to those events that AREN'T duplicated - some are annual, all-day recurrences, some are one-offs.
I've tried deleting the cache and the plist from the iMac library (even though, yes, the iMac iCal appears to be working perfectly), then resetting the iPhone, and resyncing - using the 'replace information on this iPhone' option for Calendars. No luck. I've tried re-exporting the calendar from iCloud, then re-importing, then resyncing to the iPhone. Each time it duplicates on the iPhone, but not on the iMac.
Weird - and this is driving me mental.
I'm guessing the calendar might be corrupted or something - is there an equivalent plist or something that I can try deleting from the iPhone? This has gotten beyond my skills!
Pleeeeaaaassssee heeeelp!

Update:
I ended up going through the duplicate entries on the iPhone and manually deleting the second entry in each instance. I re-synced to iMac, and the duplicate entries stayed deleted, and nothing appears changed on the iMac calendars.
I then synced iPhone 3GS and iPad 2 to iMac, doing the same process with the calendars. I noticed that I had missed one duplicated entry on my iPhone originally, and that this had transferred to each of the other machines too (ie they all had two identical entries for the same thing) (but not on the iMac, still). Deleted the second of the duplicates again on the iPhone, synced everything, and it was gone from all.
So all in all, not a brilliant fix, but a successful one nonetheless - although it remains to be seen whether the duplicates will reappear at some point, as I've noticed other users have had that problem in some circumstances. I'd love to hear if anyone has any brilliant thoughts regarding this, though.

My iPhone 5s was just updated recently to 7.1.1. Now my calendar information got deleted and I can't add any events to my calendar. The button in the top right corner should be orange but it's grey and it won't let me add events when I try to click onit

I'm trying to add events to my calendar after they got deleted and it won't let me because the + is grey when it should be orange. Does anyone know what to do?

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

When I enter events in my calendar to quickly, when it auto-syncs it will revert back to my old event.

When I enter events in my calendar to quickly, when it auto-syncs it will revert back to my old event.
If I have two calendars in use, if I use one (say red "home") and decide I want to change it to another (say green "work") it will revert back
I've called Apple, been in the store to meet numerous "geniusus" and no one can figure it out. Most apple assistants tell me over the phone that "that is not possible", well it is possible and the so-called "geniuses" have seen and confirmed it is possible but to this point the only thing "impossible" is solving the problem.
NOTHING MORE FRUSTRATING THAN PUTTING AN APPOINTMENT IN MY CALANDAR ONLY TO MISS IS BECAUSE OF AN APPLE ERROR

Naughty,
You are posting a Pages question in the Numbers forum. I am going to ask thie be moved to the Pages forum. In addition please post a screenshot. Based on playing with a chart in Pages, I do not think the charts take their input from a table, but rather, you enter the data by clicking the chart (to activate it), then clicking the button "Edit Chart Data":
manually editing the entries in the table:
I would think you want to have a table in Numbers to create the data, then copy and paste the data into the data table for the chart (I wouldn't type it in)

Labview 8.5 project crashes when searching for callers of missing lvlib

I have done a search and reviewed previously reported crashes with LV8.5, but did not find a match to what I'm seeing.
SYNOPSIS: When selecting Find > Callers, under the project Dependencies, LV crashes as shown in the image below.
I created a new project and "borrowed" some vi's from another project. Disconnected all vi's from previous libraries and proceeded to develop code last night. All seemed well.
This morning, as I opened the project to continue coding, it complained about a missing lvlib, the one items were "borrowed" from. No big deal, I'll just look at the dependencies and find out which one I missed. When doing the search, the program crashes immediately. Repeated a number of times with the same result. Verified system performance and memory useage, minimal change when opening the project or attempting to do the search.
I will attempt a workaround, but I am curious if others have seen this as well.
I'll wait before reporting this as a "bug", until more info is gathered on this..
By the way, the original lvlib was NOT deleted, removed, moved, renamed as the error suggests.. LV actually knows where it is because it finds the directory when doing the search..
I know the routine, "simply re-install LV8.5", but I'm trying to understand more of what's gooing on and how we can avoid this.. I remember LV8.2 was crashing a lot at the beginning, then for no apparent reason, it became stable, and now I can't remember the last time it crashed.. Do others observe the same thing? LV gets more stable with time?? LOL! A program with personality. Will LV turn into HAL? LOL!!
Here's the picture:
Message Edited by JoeLabView on 02-13-2008 08:35 AM
Attachments:
LV8.5ProjectCrash.PNG ‏38 KB

Good morning Jennifer,
I'll try to re-create the events from memory.
OS: Win-XP Pro - SP2
1. Opened library of VI's from Agilent E4440A drivers. Opened the "Tree.vi" to look at available vi's. Copied (pasted) some of the vi's into a new folder.   This may be important: I deleted the folder that contained the original library. (Actually, the zipped file was moved to a storage location). This means LV has no idea where to find the original library.
2. Opened all freshly copied VI at the new folder location. They all complained about not finding the .lvlib file. Ignored the error and disconnected every vi from the library and saved them. All except for one which was polymorphic and I didn't need it. I forgot to delete it at this time.
3. Created a new folder (real) within the directory structure of an existing project which uses an lvlib. Moved the disconnected vi's into this folder.
4. Opened the project and added the folder to the project, thus creating the virtual folder and files that were in the folder. All this was added to the library.
Note.. I can't remember the exact steps below, but they were something close to what I describe.
5. Cannot remember if I closed the project then opened it, but I do remember seeing a message complaining that one VI could not find the lvlib (the one from Agilent).
6. Looked into the folder and examined the saved date, which quickly led to the polymorphic VI that was still part of the original library. Since I was not sure if I wanted to use it later, I simply changed the extention from .vi to ._vi_.
7. Did some work, saved everything. Closed the project..
8. Opened the project and got an error message about a missing .lvlib. Again looking for the original Agilent lib. Remember that I had deleted the original library, it's folder, etc. (step 1).
9. Everytime I would open the project, I would get the error message. I ignore it and continue working. Since I don't like errors , I looked at the dependencies to find out what I missed. At this time, the file with the ._vi_ extension was still in the folder. I had forgotten about it and didn't realize that LV would pick it up.
10. In the dependencies tree, I right-clicked the error message and selected "Find>Callers", as shown in the attached image of the original post. Got the crash message. I repeated this 4 times. Rebooted the PC, and repeated it twice. All the same result >> Crash.   I may have saved a copy of the "crash" report, although I doubt it... I didn't bother sending the report to MS; because, well, I don't have much credibility over what those guys do at MS.
11. Looked at the folder to go through every VI to find out which one was still connected to the library. None of them were.
12. Noticed the ._vi_, and figured there would be no harm to delete it. Deleted it. It resolved the dependencies, thus no more error, no more crash.
I am actually surprised that LV project also looks into non-DOTvi files for dependencies. I imagined that it would ignore anything non-Labview known extentions. This is definitely good to know. However, the crash was a bit unexpected.
I will look for error logs. If I have time, I may try to repeat this on my PC and send logs. It will have to wait until I finish my surrent project (client / revenue)
Hope the above helps.
RayR

When attempting to add an event to my calendar and I press "done," I receive a message that reads "Cannot Save Event." "That event does not belong to that event store." What can I do remedy this issue?

When attempting to add an event to my calendar and I press "Done," I receive a message that reads "Cannot Save Event," "That event does not belong to that event store." How do I remedy this problem so I can add events and appointments to my calendar?

i am having the exact same problem, same messages (no end date set; cannot save; no calendar set; event does not belong to that event store."
it is unbelievable to me that this issue existed so long ago and hasn't been fixed. I just bought my first apple product (iphone4s) and am ready to toss it. Despite hours of searching on these forums I have been unable to find out how to fix my calendar. I have rebooted, adjusted settings to no avail. without a calendar, i can't use this product. Also, i am not technologically brilliant and can't handle the advanced fixes that some people recommend.
question, is apple a product for the ignorant like me? or should i go back to nuts and bolts pc?
all i really want is to be able to use the calendar without "uploading, reprogramming, contacting support offices for 3 hours, contacting network administrators, upgrading, switching fonts, changing operating systems.... etc. " I am just a regular person who needs a portable calendar.
sorry to vent, but can anybody tell me (in simple terms) how to get my calendar to accept a simple apointment?
thank you.

I have no more calendar synchronization with iCloud. when accessing to icloud account I cannot add an event on icloud calendar the message is :"server error"; any help?

I have no more calendar synchronization with iCloud. when accessing to icloud account I cannot add an event on icloud calendar the message is :"server error"; any help?

Tap the little claendar icon at the top left (next to the search icon) and see what calendars are set up in WeekCal. If none are enabled, then enable the one(s) you want to use.

Searching Calendar fails to find all events

First, this program is no longer called iCal. I understand the change, but others may be confused.
Second, when searching for all events with a certain word, it is clear that not all events are being returned.
I'm using Calendar under OS-X 10.9.2 and the calendars are iCloud based.
There seems to be no logic to the events that ought to be caught by the search but that are omitted. I'm estimating only about a third of events matching my search criteria (just a word, like "Volunteer") are being returned. I can see all the events with that word in the calendar but they don't all turn up in a search.
I tried re-indexing with mdimport to no avail. This makes Calendar nearly useless, if search is not reliable.

Hi, I also had the same issue with VSC 6.0 where the SVM was not being displayed. Here is the solution that worked for me:Check there is a domain-tunnel created for you vserver. EG cluster1>domain-tunnel show If your vserver is not displayed in the output then create a domain-tunnel. EG cluster1>domain-tunnel create -vserver vserver1 /matt

Spotlight will not search Calendar events past one year (?)

I have many years worth of events in my Calendar and I transferred them all to my iPod Touch since I need to refer to old events (freelance jobs) for work needs. Spotlight searches will not show events older than 1 year (which would be a ridiculous limitation). Anyone else having the same experience?

I am here looking for a solution to the same problem. Who writes a Calendar search function that only goes back 1 year? (I mean, really) I have to go iCal on my iMac to find older events, and my events go back 10 years these days since I use the Calendar as a type of journal (the calendar data were imported from my Palm III -> V -> Vx -> Zire). Most annoying during meetings when I continually have to respond with "I have to get back to you on that" on anything of personal historical significance. Is there nothing out there that will do an exhaustive search? Please don't tell me I have to wait for my computer science students to get a job at Apple to have this feature properly implemented.

Missing events when searching Calendar

Similar Messages

Maybe you are looking for