Missing exe file

I don't know how to reply to the message Millenium sent but it was discovered I was sold Adobe Photo shop for Mac OS and not for Windows this was why my exe file was missing.

Ruby I believe you are trying to respond to http://forums.adobe.com/thread/1176950.

Similar Messages

  • Failure to launch Lightoom 6 missing .exe file

    I've downloaded Lightroom 6 twice now because it does not launch from the shortcut.  I cannot find an exe file in the Program Files to launch directly.  Anyone else having this problem and/or have a solution?

    I'm answering my own question . . . you first need to log out of creative cloud and then log back in.  Not sure why, but it works. 

  • PSE7 Missing exe.file after installation

    Hi,
    I purchased PSE7 from Adobe store this afternoonn. After download of PSE7_WIN_DE.exe and extracting into the desktop installation folder - installation of PSE started and finished. But - there is no exe file to start PSE, not even in the program folder and the new created shortcuts by the installer are empty (by showing the windows root exe symbol, not the PSE). I have removed and installed it for serveral times now, always with the same effect - no exe. file. Can someone help me out?
    Thanks

    If you have not done so already, turn off your security software and try installing again.  Else, you can call Adobe for assistance.  They will not charge for the support since you have an installation problem with the current version of PSE.
    Juergen

  • Missing Premier Elements 10 .exe file on Adobe site

    I am reinstalling Premier Elements 10 on a new PC and the .exe file appears to be missing on the Adobe download page. 
    Any ideas on how to install would be great!
    Regards,
    Chris

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 10:
    http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l

  • I'm having to re-install PSE 11 on a new hard Drive.  I clicked the installer and it ran, but says it's missing the .exe file.  I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11.  Now I'm contactin

    I'm having to re-install PSE 11 on a new hard Drive.  I clicked the installer and it ran, but says it's missing the .exe file.  I then downloaded PSE 11 from your website and when I unzipped it and ran it, it wanted to uninstall PSE 11.  Now I'm contacting you

    Okay, so, fast forward from July to now -
    - I've visited my closest Apple store's genius bar twice now. (Over an hour and a half away.)
    - My computer spent at least 8 hours behind their closed doors in the workshop
    - Several complete erases of the harddrive have taken place
    - Most of the Apple geniuses I dealt with were nice and very knowledgeable, but they were and still aren't 100% sure exactly what is wrong with my computer.
    The good news is:
    - They were able to at least get it running again, with a clean install from their servers of OS X Lion 10.7.5
    - They believe that my problems stem from either 1 of 2 things:
            - Faulty Hard Drive (even though it is brand new)
             - The wrong build of software being installed.
    Now, while the wrong build does seem like it could be the problem, it doesn't make sense in the aspect that all of the initial problems began when the first hard drive failed. The same problems continued when I changed out the failed hard drive with the brand spanking new one, and only slightly improved when I was able to successfully install the OS that came with the original disks for my computer. I'm not convinced this thing is back to normal, but hopefully I can make it last through getting a shiny new retina Macbook Pro in the coming future. Thank you so much to everyone who read and replied to this post!
    - Andrew =)

  • Can't open the Firefox after install on window. Error indicated I missing the EXE file

    Firefox required me to update the flash player, Norton indicated the flash player I just download may contains virus so I removed it right a way. After the virus scanned, I reboot the computer and I am not able to open the Firefox and other applications on the desktop. I got a message indicated the exe file was corrupted or removed. I really don't want to buy other program to fix this problem.

    Did you use the bad computer to post this message?
    Where did you get the Flash program from?
    Are all programs giving you problems, or only some? What ones?
    '''[http://support.microsoft.com/fixit/ Microsoft Fix it Solution Center: troubleshooting software issues]'''
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Error in making an .exe file

    hello..
       i just make a labview file  and tried to make an .exe file..
    i show error..   missing of  file path of an  Icon.. it is in NI Library file..
    Why it is not taking the path from thr..
     it also showing error that.it may be due to the moving or deleting the File..
    Please suggest a Solution to debugg this problem soon..
    TIJU
    Regards
    Tiju Thomas

    TIJU wrote:
    hello..
       it also showing error that.it may be due to the moving or deleting the File..
    Hai,
    Try to collect all the files in a single folder and try to build exe again.
    Hope this helps!
    Mathan
    Don't forget to rate a good answer.

  • How do I install Photoshop from the .exe files I got from Adobe?

    I downloaded Photoshop CS2 from Adobe's site.  That download gave me 5 .exe files, including CreativeSuiteCS2Disc1.exe, CreativeSuiteCS2Disc2.exe, and CreativeSuiteCS2Disc3.exe. 
    When I clicked on CreativeSuiteCS2Disc1.exe, files were extracted and installation began.  I put in my serial number and other information, and things seemed to be going fine.  Then a window popped up with the message "Please insert Disk 2."  Well, I don't have a Disk 2.
    My download included a file "CS2_install_Win.pdf."  In those instructions, it says "the InstallShield wizard may return an error, "Please insert disk [ number ]." If this error occurs, click OK in the dialog box and then double-click the disk image to which the installer refers to manually extract the disk and complete the installation."  So, I clicked on CreativeSuiteCS2Disc2.exe, which overwrote the extracted files from CreativeSuiteCS2Disc1.exe.  But the box saying "Please insert Disk 2" didn't go away. No matter how many times I clicked "OK" it just stayed there.  
    Still, CreativeSuiteCS2Disc2.exe ran, and when it was done I got a message that installation was complete.  But, when I tried to run CS2, I got an error that my serial number and organization were invalid or not installed properly.  I know they were installed because I put them in when I ran CreativeSuiteCS2Disc2.exe
    So, given that following the pdf instructions that came from the download don't seem to work, can anyone out there offer me better instructions on how to do this installation?  I was thinking of extracting each .exe file to a CD, then just inserting those CDs one at a time.  Will that work?

    Missing personalization infopoints to permissions/ user privileges issues which are to be expected with such old versions on contemporary operating systems. Run as admin, turn off security stuff, try compatibility modes. Actualyl burning the discs will of course work, but you might look into simply mounting folders/ disc images as virtual drives e.g. using Daemon Tools Lite or your disc burning software's own disc mounter.
    Mylenium

  • Unable to install ituns on windows 7 64 missing .dll file

    Unable to install ituns on windows 7 64. Installer states missing .dll file.

    Here is a solution that worked for a user who also had a problem with iTunes Software Support. This thread was for a win32 version, but Maybe this is the problem for both of you?:
    IT appears that AppleApplicationSupport.msi, is not opening and installing properly.
    Download and SAVE iTunesSetup.exe, where you can find it.
    Then:
    1. Download and install WinRAR.
    2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
    3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
    4. Done! You can now run iTunes normally.
    Here is a link to that fairly lengthy thread.. http://discussions.info.apple.com/thread.jspa?threadID=2151777&tstart=-1

  • Having trouble installing my licensed LR 5 on a new computer.  I have .exe file and also license/serial number. but I am asked only to buy or try.

    Old computer died, and I am trying to install LR 5.5 on my new computer.  I have run the exe file and have moved all my picture files and the LR data base files to the new computer.  When I try to open the program (it is listed in  my start menu and is in my system tray, too) a window opens that already shows as selected the option saying I have a license, but there is no way of going forward from that window.  I could choose buy or try out or cancel. I'm obviously missing something here and would appreciate any help.  Should I perhaps run the exe of LR 5 and then do updates to get to 5.5?
    I have checked my Adobe account and LR5 shows as being owned by me.  I have NOT downloaded the CC version of LR.  I am running Win 7, 64-bit.

    Just FYI, apparently, running LR 5 exe works as we would have expected, and
    the link to update to 5.5 comes right up when the program is opened.  Takes
    some time, of course (and wants to create a new catalog as well), but it
    does work.
    G

  • Acrobat 7.0 Missing PdfMaker files and won't pdf files

    Hi,
    I have Acrobat 7.0 standard edition and I'm running it on Windows XP with MS Office 2003.
    The icons to automatically create PDF from MS Word does not appear and when I look for them on the toolbars menu they are not there.
    So I open Acrobat and click create pdf, but midway it tells me that it is missing some pdfmaker files and do I want to run it on repair mode.
    I click yes, but that does not solve the issue.
    I have tried uninstalling and removing the whole program and that did not help.
    I even removed all the activation information and reinstalled it and reactivated it and no luck.
    I have also downloaded the latest update from adobe and still no luck.
    Please help if you can

    I have had this problem with nearly every version of Adobe Acrobat up to and including 9.0
    Here are four things I do to resolve this issue in order of time/difficulty:
    First, I made sure that the Adobe Acrobat plug-in wasn't disabled.
    In any Microsoft Product such was Word, Excel, etc.  go to Help>About Microsoft (Word/project, etc) and then click on the 'disabled items' button.
    If the plug-in is disabled, select it and enable it again.
    Second,  I make sure the PDFMaker files are registered.
    I open a command prompt and navigate to the PDFMaker plug-in dll files in Adobe.
    In Adobe Acrobat 8.0  the file path is:
    C:\Program Files\Adobe\Acrobat 8.0\PDFMaker\Office
    I then type in:
    regsvr32 PDFMOffceAddin.dll
    That should enable the Office PDFMaker plug-ins.
    Third, I make sure that the AcroDist.exe application path was configured properly in the registry.
    If it isn't, I just create it.
    Registry path:
    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths
    Look for the entry "AcroDist.exe"
    If not there, create it - it is a 'Key". (right click on App Paths and choose New>Key)
    In the AcroDist.exe  key the (Default) value should be:
    C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroDist.exe  
    or
    C:\Program Files\Adobe\Acrobat 8.0\Acrobat\AcroDist.exe
    depending on which version of Adobe Acrobat you have.  Essentially you put the absolute path for the AcroDist.exe file in there.
    The only other entry in the AcroDist.exe key should be the String Value Path.  If it isn't there, create it  (right click and choose New>String Value)
    The name of the String Value should be Path and the value should be the path of the AcroDist executable.   e.g.:
    C:\Program Files\Adobe\Acrobat 7.0\Acrobat\
    or
    C:\Program Files\Adobe\Acrobat 8.0\Acrobat\
    Close out the registry and try to use the PDFMaker again
    If that still doesn't work then I run a repair on Adobe.  If THAT doesn't work then I completely uninstall/reinstall.

  • VISA read in exe file is not working

    Hi all,
    I am having problems with VISA read in an exe file created.
    I am trying to write to and read from a programmable power supply via RS232. The VI writes a command to the instrument to set the voltage level. It then writes another command, requesting the resulting current value. This value is then read by VISA read
    The VI is working fine on the development PC, which has LabVIEW installed. The exe file is also working fine on this PC. However, when I try to run the exe file on another PC (I've tried several) everything seem to work except for the VISA read functions. The voltage level command is sent, as well as the On and OFF commands, but the current is not read back.
    I guess there must be something I have missed in the installation. I am working in LabVIEW 8.5. I have created an installer and included
    Runtime Engine 8.5.1
    VISA runtime 4.5
    Is there something else I should do? I am really running out of ideas here...
    I hope someone has a clue about this!
    Clara 

    Clara-
    1. Have you verified that the COM port settings in Windows (check under device manager) are matching how you initialize them (Baud, bits, parity, and flow control) and that these match the power supply's settings?
    2. Also, are you trapping an error message after the attempted Read command (this will make it a lot easier to diagnose).
    3. Do you programmatically close the VISA session at the end of the program?
    4. You can always post the code to see if the forum members will catch the porblem.
    ~js
    2006 Ultimate LabVIEW G-eek.

  • Problem running .exe files

    I cannot run .exe files on Windows 10. A pop-up window shows a message that the .exe file I am trying to run is missing. What can I do to solve this problem ?

    Keep in mind that the Win 10 build "refresh" operations are clearing parts of the registry back to default values, so some things you've installed might end up uninstalled or only half installed after an upgrade to a new TP build.
    What EXACTLY is going wrong?  In other words, exactly what are you trying to do, and what is the exact content of the message(s) you're seeing.
    Details matter.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • HT204302 missing the file QTTASK in itunes......how do I load it

    my ipod shufler is not being recognized by itunes......then I discover I am missing the file QTTASK
    how do I load this file
    thanks

    qttask.exe is a QuickTime program file rather than an iTunes program file. If you don't have QuickTime installed on the PC, then it won't appear on the system.

  • RIDICULOUS Crystal Reports Server XI R2 SP4 - Installing - missing cab file

    Unsympathetic SAP rep Don Williams wrote in a now closed thread,
    Subject: Re: Crystal Reports Server XI R2 SP4 - Installing - missing cab file : m293.cab
    Message: Hi All,
    There is no incremental SP4 service pack for Crystal Reports Server XI R2 and no plans to build one.
    Your ONLY option is to back up your CMS and Data store, un-install and then install from the FTP link.
    The downloadable file from the support site is broken and they are working on fixing it and it is/will be the full build also.
    Closing this post now.
    Thank you for your understanding
    Don
    Frankly, this is outrageous.  This issue has been open for close to 5 months.  Rather than simply updating the SP4 incremental update with the correct files, SAP's brilliant response is to tell us that the file is STILL broken, but ***** you, whenever we fix it it will be the full build only.  Well, thanks!  That makes it so much easier.  Rather than looking at Crystal Reports 2008, maybe it's time to suck it up and look elsewhere,
    Here's hoping SAP decides to do the right thing.  I'm sure everyone on the original thread would be interested.

    Hi Falk,
       Yes, I am downloading it from a Win2003 machine. The browser is IE7.
       I can even see what's inside the m293.cab, and it is not the file mentioned on the error message...
       This is the m293.cab content (one file):
       tslv.dll.7ADA0B91_68E0_4E90_AD3D_23C9E3079BAB
       The file doesn't seem to be corrupted, it just doesnt have what was expected by the installer software.
       I tried downloading it again and had the same result... These are the installation files that I've already tried with the same result:
        - crsxir2win_sp4.exe (from [https://smpdl.sap-ag.de/~sapidp/012002523100009887052008E/crsxir2win_sp4.exe])
        - 1401492085.exe (from [https://businessobjects.subscribenet.com/control/bobj/product?cert_num=48316663&child_plneID=30801])
       The next one was not the rigth package:
         - boXIwin_sp2.zip (from [https://smpdl.sap-ag.de/~sapidb/012002523100005931922008E/boXIwin_sp2.zip])
       I uploaded the servicepack4 part of the log where the error appears:
      [ftp://ftp.businessobjects.com/pub/incoming/sp4LogPiece.txt]
    Thanks,
    Marcos

Maybe you are looking for