Missing expression in query

Dear all,
select 'GRANT' || privilege || ' ON ' || OWNER || '.' || TABLE_NAME || from dba_tab_privs where grantee like 'TEST%';
why the above commands erroring out Missing expression..what Do I have to change ?
I wish that I should not get mocking answers from the Senior Oracle DBA in this Forum.
Thanks all
Kai

Use
select 'GRANT '|| privilege || ' ON ' || OWNER || '.' || TABLE_NAME ||' ;' from dba_tab_privs where grantee like 'TEST%';
This will give the output but what i was thking is TO WHOM is the privilege to be given .That too has to be added in this script
select 'GRANT '|| privilege || ' ON ' || OWNER || '.' || TABLE_NAME ||' to user_name;' from dba_tab_privs where grantee like 'TEST%';
Anand
Edited by: Anand... on Dec 24, 2008 2:20 PM

Similar Messages

Missing operator in query expression

Greetings,
I'm attempting to access a MS Acess database, but getting the following error.
Syntax error (missing operator) in query expression 'Org Name'.
The error occurs between the following two lines.
String SQL = "SELECT Org Name FROM OrganizationTable";
ResultSet resultset = statement.executeQuery(SQL);Where Org Name is the data set I'm trying to access and OrganizationTable is the database table.
Any help would be appreciated.

What is happening is that the interpreter is seeing
"Org Name" as two different columns and/or values and
is expecting an operator. Somehow you need to
indicate that it should be interpreted as a single
column.
Try one of these (I'm not sure if one will work since
I don't work with access much, but I'm guessing that
it would work similar to other dbs I've used):
String SQL = "SELECT [Org Name] FROM
OrganizationTable";
or
String SQL = "SELECT 'Org Name' FROM
OrganizationTable";
Thanks boss,
I started to get it figured as I was able to open a result set that didn't have any whitespace in the name in the same table.
FYI, [Org Name], did the trick. Single quotes do not work.
Thanks again :)

Syntax error (missing operator) in query expression works in sql

Hi guys,
I am having a problem with this query in Access 2007, it runs
fine in MSSQL.
I get this error when I run it.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error
(missing operator) in query expression
'tbl_skuoption_rel.optn_rel_Option_ID = tbl_skuoptions.option_ID
INNER JOIN tbl_skus ON tbl_skuoption_rel.optn_rel_SKU_ID =
tbl_skus.SKU_ID INNER JOIN tbl_products AS p ON
tbl_skus.SKU_ProductID = p.product_ID'.

Access may require parenthesis ( ) around the JOINs when
joining more than two tables

Syntax error (missing operator) in query expression

Hi all
I am creating a couple of pages where a dynamic list is created from an access database and then products from that list are displayed, the user then has the option of clicking more details, this then should pass the KITID over to the details page, However when i click on the details page i get the following error
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'KitID = Kit 01'.
/classicclocks/Kieninger_gallery.asp, line 21
Here is the code from the page i am building, can anybody see anything obvious here
strKitID = Request.QueryString("KitID")
' If KitID does not exist then redirect to Gallery page
If strKitID = False Then
Response.Redirect("kit_gallerytest.asp")
End If
' SQL Query for specific KitID details only
Dim objRS
Set objRS = Server.CreateObject ("ADODB.Recordset")
' Open new objRS
strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = " & strKitID & " ORDER BY KitID"
objRS.Open strSQL, MM_dbConn_STRING,,,adCmdTable
' Get all rows from table and asign values to array for use in form
Do While Not(objRS.EOF)
Images = True
fsImagesArray = objRS.GetRows()
    Const arrKitID = 0
    Const arrImgKitCatalogue = 1
    Const arrKitDescriptionShort = 2
Loop
' Close objConn and objRS
objRS.Close
strSQL = "SELECT * From tblMovements WHERE KitID = " & strKitID
objRS.Open strSQL, MM_dbConn_STRING
thanks
John

String values in a SQL where clause must be wrapped in quotes. Try this:
strSQL = "SELECT KitID,ImgKitCatalogue,KitDescriptionShort FROM tblMovements WHERE KitID = '" & strKitID & "' ORDER BY KitID"

Missing Expression error in query...

Hi,
SELECT DECODE(NAME, '~', '', NAME),
       DECODE(NAME_2, '~', '', NAME_2),
       DECODE(SALES_ORG_ID, '~', '', SALES_ORG_ID),
       DECODE(PARTNER_ID, '~', '', PARTNER_ID)
FROM DMN_SALES_PARTNER
WHERE (
                    (upper(trim(country_name)),(trim(state_id))) IN
                   SELECT DISTINCT upper(trim(scsm.country_name)),upper(trim (scsm.state_name))
           FROM sop_region_country_map srsm, sop_user_map   smap,sop_country_state_map scsm
           WHERE SSO_ID = '&sso_id' AND
           upper(trim(smap.region_id)) = upper(trim(srsm.region_id)) AND
           upper(trim(srsm.country_name)) = upper(trim(scsm.country_name)) AND
           decode(upper(trim(srsm.state_name)),NULL,'~',upper(trim(srsm.state_name)) ) = upper(trim(scsm.state_name))
           AND deviation_from_sap = 'N'
          OR
           SELECT upper(trim(scsm.country_name)),upper(trim(scsm.state_name))
           FROM sop_country_state_map scsm
           WHERE (upper(trim(scsm.country_name)),scsm.sap_state_map_id) in (
           select upper(trim(scssm.country_name)),scssm.sap_state_map_id
           from sop_country_state_sap_mapping scssm )
          )I want to return the combination of country_name and state_name from any of the queries in OR clause so as to compare them with the country_name and state_id of main query..I have written the above query for it but its giving me "Missing Expression" error..
Pls help..
Thx
JP

JP,
Your second part after the "OR" is just a SQL statement and it is not being compared to an expression. That's probably what the error message is telling you.
Regards,
Rob.

Query with error "Missing Expression"

Hi
I have written a query but it returns the following error:
ORA-00936: missing expression
The code is as below:
SELECT
     ENUM_AT_ABSENCE_REASON_CODE.absence_type AS "VALUE",
     ENUM_AT_ABSENCE_REASON_CODE.absence_type AS "LABEL",
     '2'AS "SORTORDER"
     FROM ENUM_AT_ABSENCE_REASON_CODE
     WHERE
     ENUM_AT_ABSENCE_REASON_CODE.DISTRICT_NUMBER = ('1000')
    AND
    ENUM_AT_ABSENCE_REASON_CODE.SCHOOL_ID IN ('705')
     AND
    AND SY_SCHOOL_TRACK.SCHOOL_YEAR = '2006'
ORDER BY SORTORDER,LABELI am not sure how to correct the error. Any help is gratefully acknowledged.Thanks in advance.

You have two ANDs together. Kind of leaps out when you format the query ;)

Native SQL Query Error: DBIF_DSQL2_SQL_ERROR -- ORA-00936: missing express

Hi,
I tried to read data using the following SQL Query,
fp_work = 'ABCD'.
EXEC SQL PERFORMING WRITE_TO_ITAB .
SELECT fp_code, bank_acc_code, bank_acc_num,
INTO :gs_cds_data-FP_CODE,
           :gs_cds_data-BANK_ACC_CODE,
           :gs_cds_data-BANK_ACC_NUM,
   FROM BANK_TABLE
WHERE fp_code = :fp_wrk
ENDEXEC.
*&      Form WRITE_to_itab
FORM write_to_itab.
To move the data into the Internal Table.
APPEND gs_cds_data TO gt_cds_data.
CLEAR gs_cds_data.
ENDFORM.                    "WRITE_to_itab
and im getting the run time error..
What happened?
The error occurred in the current database connection "SAPABC".
How to correct the error
Database error text........: "ORA-00936: missing expression"
Triggering SQL statement...: "FETCH NEXT "
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" C
If you cannot solve the problem yourself, please send the
following documents to SAP:
Can anyone give me a solution to correct this error?
In addition, Can i omit the WHERE clause, as i need to get all the data in the oracle database?

BUT,
      EXEC SQL.
        connect to :LV_DB_NAME as :sy-uname
      ENDEXEC.
      EXEC SQL.
        SET CONNECTION :sy-uname
      ENDEXEC.
     check sy-subrc..
connection is happening.. with sy-subrc value as ZERO

IR Report Search - ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression

Hi All,
I had created a IR report based on a table and it was working with no issues. But after few days, when I try searching using the IR search bar it shows "ORA-20001: get_dbms_sql_cursor error ORA-00936: missing expression" error message. I don't see any debug messages or errors in the debug window. The Finder drop down is empty too, there are no columns displayed to filter.
When I recreate the IR report(new page) based on the same table, It works fine and there are no issues with the search. But the old IR report search doesnt work. I have not modified the any thing in the old report after initial creation. Report uses Primary key based on a sequence.
What might have caused this issue?
Is there a way to intercept the search query from IR report?
Apex version - 4.2.3.00.08.
Any help on this appreciated.
Thanks,
Jagan

Hi MK, as I had mentioned in my post, I don't see any logs in the debug window, query tab.
Can you please guide me how to check the query logs on search?
Thanks,
Jagan

ERROR: ORACLE prepare error: ORA-00936: missing expression

Hello,
I am required to run "pass-through" Oracle SQL, to extract data from tables into SAS for processing and manipulation. My code (attached) reads and writes (executes) but with zero records to test first. I cannot get past the Prepare Error.
The query is very much like other queries that seem to work, but I cannot get past this prepare error. I have no other access to individauls with adequate knowledge of PL SQL, and as a last stop hoped others in the forum could quickly spot the source of errror.
Thanks very much in advance for any assistance.
Jeff
1 ;*';*";*/;quit;run;
2 OPTIONS PAGENO=MIN;
3 %LET _CLIENTTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
4 %LET _EGTASKLABEL=%NRBQUOTE(rx_biplr_v3_2);
5 %LET _CLIENTPROJECTNAME=%NRBQUOTE();
6 %LET _SASPROGRAMFILE=;
7
8 ODS _ALL_ CLOSE;
NOTE: Some of your options or statements may not be supported with the Activex or Java series of devices. Graph defaults for these
drivers may be different from other SAS/GRAPH device drivers. For further information, please contact Technical Support.
9 OPTIONS DEV=ACTIVEX;
10 FILENAME EGHTML TEMP;
NOTE: Writing HTML(EGHTML) Body file: EGHTML
11 ODS HTML(ID=EGHTML) FILE=EGHTML ENCODING='utf-8' STYLE=EGDefault
11 ! STYLESHEET=(URL="file:///C:/Program%20Files/SAS/Shared%20Files/BIClientStyles/EGDefault.css")
11 ! ATTRIBUTES=("CODEBASE"="http://www2.sas.com/codebase/graph/v91/sasgraph.exe") NOGTITLE NOGFOOTNOTE GPATH=&sasworklocation
11 ! ;
12
13 %gaccessible;
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date Programmer Reviewed By WHAT WAS DONE;
24 *----- -------------- ------------ -----------------------------------------;
25 *2005 David Boyd Program creation for test population;
26 *;
27 *02/06/2006 Ivon Jones Modified to include total population;
28 *;
29 *07/20/2006 Ivon Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 Ivon Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data _null_ ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
2 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.01 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data _null_ step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data _null_ ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.01 seconds
3 The SAS System 11:44 Friday, October 30, 2009
cpu time 0.00 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.03 seconds
cpu time 0.03 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 3.74 seconds
cpu time 0.03 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.32 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 pcp_spc,
110 rx_date,
4 The SAS System 11:44 Friday, October 30, 2009
111 brand,
112 generic,
113 ahfs_cd,
114 ahfs_dsc,
115 lbl,
116 strngth,
117 unt,
118 spc_tx_cls_cd,
119 spc_tx_cls_dsc,
120 gcn,
121 rx_num,
122 rx_ingrd,
123 rx_paid,
124 rx_cnt,
125 rx_qty,
126 rx_day
127 FROM connection to rosdwp
128 (SELECT
129 mid.UNIQ_MBR_ID as mrb_id,
130 pd.PRVDR_SPCLTY_DESC as pcp_spc,
131 pcf.LAST_SRVC_DT as rx_date,
132 dd.BRAND_NAME as brand,
133 dd.GNRC_NAME as generic,
134 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
135 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 dd.LABEL_NAME as lbl,
137 dd.STRNGTH_NUM as strngth,
138 dd.STRNGTH_UNIT_DESC as unt,
139 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 dd.GCN_NUM as gcn,
142 pcf.PRSCRPTN_NUM as rx_num,
143 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
144 SUM(pcf.PD_AMT) as rx_paid,
145 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
146 SUM(pcf.DSPNSD_QTY) as rx_qty,
147 SUM(pcf.DAY_SUPLY_CNT) as rx_day
148 FROM
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN mid,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153           biplr_up_v1
154 WHERE
155 (
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
157 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
159 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
160 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
161 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
162 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between &q.&fdos.&q and &q.&ldos.&q)
163      )
164 Group By
165 mid.UNIQ_MBR_ID ,
166 pd.PRVDR_SPCLTY_DESC ,
167 pcf.LAST_SRVC_DT ,
168 dd.BRAND_NAME ,
5 The SAS System 11:44 Friday, October 30, 2009
169 dd.GNRC_NAME ,
170 dd.AHFS_THRPTC_CLS_CD ,
171 dd.AHFS_THRPTC_CLS_DESC ,
172 dd.LABEL_NAME ,
173 dd.STRNGTH_NUM ,
174 dd.STRNGTH_UNIT_DESC ,
175 dd.SPECF_THRPTC_CLS_CD ,
176 dd.SPECF_THRPTC_CLS_DESC ,
177 dd.GCN_NUM ,
178 pcf.PRSCRPTN_NUM
179 );
ERROR: ORACLE prepare error: ORA-00936: missing expression. SQL statement: SELECT mid.UNIQ_MBR_ID as mrb_id,
pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic,
dd.AHFS_THRPTC_CLS_CD as ahfs_cd, dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as
strngth, dd.STRNGTH_UNIT_DESC as unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, dd.GCN_NUM as gcn, pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT)
as rx_paid, SUM(pcf.UNIT_SRVC_CNT) as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day
FROM PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, biplr_up_v1 WHERE (
(biplr_up_v1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
(PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
(PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN between '01JUN2007'
and '30SEP2009') ) Group By mid.UNIQ_MBR_ID , pd.PRVDR_SPCLTY_DESC , pcf.LAST_SRVC_DT , dd.BRAND_NAME ,
dd.GNRC_NAME , dd.AHFS_THRPTC_CLS_CD , dd.AHFS_THRPTC_CLS_DESC , dd.LABEL_NAME , dd.STRNGTH_NUM ,
dd.STRNGTH_UNIT_DESC , dd.SPECF_THRPTC_CLS_CD , dd.SPECF_THRPTC_CLS_DESC , dd.GCN_NUM , pcf.PRSCRPTN_NUM.
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
180 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
181 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
182 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.14 seconds
cpu time 0.03 seconds
183
184

Hello Again ,
Wish Oracle was a bit more informative. Am using a SAS Institute Product called Enterprise Guide. A "hot fix" was installed to address an issue that the product appears unable to save the latest version of edited code changes (hence " BETWEEN between" remaining even after a prior edit). In any case, with the change, am now receiving this error:
" ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier". (Log file appears below)
-The error remains, regardless of whether one uses "pass through" code to pass the date range to Oracle (which looks ok from the log output below I believe), or if I hard code the date range into the PL SQL query itself.
-The Prepare error always appears at end of the inner SELECT.
-The Prepare error remains, with or without the GROUP BY clause.
Is there anything else here I am missing? Someone suggested a reserve word - but from other ANSI SQL versions, I do not see that is the case. I have consulted SAS Tech Support and SAS List Serve at University of GA. but nothing definitive from these sources. Have requested facility to be able to run Oracle directly, outside this SAS Institute product - in process.
Any suggestions are greatly appreciated. Thanks to everyone very much.
Jeff
14 /********************************************************/
15 * RX_BIPLR_V3.SAS ;
16 /********************************************************/
17
18 dm 'log;clear;out;clear';
19 options linesize =120;
20 Option obs=0 NoReplace;
21
22 ****************************************************************************************;
23 *Date       Programmer         Reviewed By     WHAT WAS DONE;
24 *-----      --------------     ------------    -----------------------------------------;
25 *2005 D. Boyd Program creation for test population;
26 *;
27 *02/06/2006 I. Jones Modified to include total population;
28 *;
29 *07/20/2006 I. Jones Identified data elements for exclusion;
30 * or inclusion for consolidation with ;
31 * Robin's report;
32 *;
33 *08/18/2006 I Jones Updated the Specific Therapeutic Classes;
34 * 10-2009 J Shaf - modified to extract actual or potential Bipolar Dx from UBH and Medical Claims;
35 ****************************************************************************************;
36
37
38
39 *%let allclmorgn = ('M','A') ; /* all claims origin code */
40 %let begdate='01SEP2009'd;
41 %let enddate='30SEP2009'd;
42 %let q = %str(%') ;
43
44
45 data null ;
46 call symput('fdos',put(intnx('month',"&begdate"d,-27,'beginning'), date9.) ) ;
47 call symput('ldos',put(intnx('month',"&enddate"d,-0,'ending'), date9.) ) ;
48 run ;
2 The SAS System 12:46 Monday, November 2, 2009
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.00 seconds
49
50
51
52 **************************************************************;
53 * ??Use the data null step to create a macro variable for the ;
54 * year and month based on the ldos macro variable in the data ;
55 * step above?? ;
56 **************************************************************;
57
58
59 data null ;
60 if month("&ldos"d) < 10
61 then call symput('yr_mo',compress(year("&ldos"d) || '0' || month("&ldos"d) ) ) ;
62 else call symput('yr_mo',compress(year("&ldos"d) || month("&ldos"d) ) ) ;
63 run ;
NOTE: Numeric values have been converted to character values at the places given by: (Line):(Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
64
65 *%put &biplr_dx;
66 %put &begdate ;
'01SEP2009'd
67 %put &enddate ;
'30SEP2009'd
68 %put &fdos ;
01JUN2007
69 %put &ldos ;
30SEP2009
70 %put &q ;
71
72
73 libname biplr'/home/jshafi01/projects/adhoc/biplr_dprsn/data';
NOTE: Libref BIPLR was successfully assigned as follows:
Engine: V9
Physical Name: /home/jshafi01/projects/adhoc/biplr_dprsn/data
74 libname rosdwp oracle user="&oracle_user." pass="&oracle_pass." buffsize=32767 path='rosdwp';
NOTE: Libref ROSDWP was successfully assigned as follows:
Engine: ORACLE
Physical Name: rosdwp
75
76 data work.biplr_up_v1;
77 attrib mbr_id length=$26;
78 set biplr.biplr_ubh_med_v1;
79 run;
NOTE: There were 0 observations read from the data set BIPLR.BIPLR_UBH_MED_V1.
NOTE: The data set WORK.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: DATA statement used (Total process time):
real time 0.00 seconds
cpu time 0.01 seconds
80
81 proc contents;
82 run;
NOTE: PROCEDURE CONTENTS used (Total process time):
real time 0.02 seconds
cpu time 0.02 seconds
83
84 proc datasets
85      library = rosdwp nolist;
86      delete biplr_up_v1;
87 quit;
NOTE: Deleting ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.61 seconds
cpu time 0.01 seconds
88
89 proc datasets
90      library=work nolist;
91      copy out = rosdwp move;
92      select biplr_up_v1 ;
93 quit;
NOTE: Moving WORK.BIPLR_UP_V1 to ROSDWP.BIPLR_UP_V1 (memtype=DATA).
NOTE: SAS variable labels, formats, and lengths are not written to DBMS tables.
NOTE: There were 0 observations read from the data set WORK.BIPLR_UP_V1.
NOTE: The data set ROSDWP.BIPLR_UP_V1 has 0 observations and 1 variables.
NOTE: PROCEDURE DATASETS used (Total process time):
real time 0.15 seconds
cpu time 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 *execute(commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint ;
104 connect to oracle as rosdwp (user="&oracle_user." password="&oracle_pass" buffsize=32767 path='rosdwp'
104 ! preserve_comments);
105      execute(alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
106 CREATE table biplr_rx as
107 SELECT
108 mrb_id,
109 uniq_mbr_id,
110 pcp_spc,
111 rx_date,
112 brand,
113 generic,
114 ahfs_cd,
115 ahfs_dsc,
116 lbl,
117 strngth,
118 unt,
119 spc_tx_cls_cd,
120 spc_tx_cls_dsc,
121 gcn,
122 rx_num,
123 rx_ingrd,
124 rx_paid,
125 rx_cnt,
126 rx_qty,
127 rx_day
128 FROM connection to rosdwp
129 (SELECT
130 mid.UNIQ_MBR_ID as uniq_mrb_id,
131 blpr.mrb_id.mbr_id,
132 pd.PRVDR_SPCLTY_DESC as pcp_spc,
133 pcf.LAST_SRVC_DT as rx_date,
134 dd.BRAND_NAME as brand,
135 dd.GNRC_NAME as generic,
136 dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
137 dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc,
138 dd.LABEL_NAME as lbl,
139 dd.STRNGTH_NUM as strngth,
140 dd.STRNGTH_UNIT_DESC as unt,
141 dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
142 dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
143 dd.GCN_NUM as gcn,
144 pcf.PRSCRPTN_NUM as rx_num,
145 SUM(pcf.INGRDNT_AMT) as rx_ingrd,
146 SUM(pcf.PD_AMT) as rx_paid,
147 SUM(pcf.UNIT_SRVC_CNT) as rx_cnt,
148 SUM(pcf.DSPNSD_QTY) as rx_qty,
149 SUM(pcf.DAY_SUPLY_CNT) as rx_day
150 FROM
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN mid,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155      BIPLR_UP_V1 blpr
156 WHERE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN.UNIQ_MBR_ID) And
158 (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And
160 (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
161 (PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And
162 (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
163 (PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN &q.&fdos.&q and &q.&ldos.&q)
164 );
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT"."LAST_SRVC_DT": invalid identifier. SQL statement: SELECT
mid.UNIQ_MBR_ID as uniq_mrb_id, blpr.mrb_id.mbr_id, pd.PRVDR_SPCLTY_DESC as pcp_spc, pcf.LAST_SRVC_DT as
rx_date, dd.BRAND_NAME as brand, dd.GNRC_NAME as generic, dd.AHFS_THRPTC_CLS_CD as ahfs_cd,
dd.AHFS_THRPTC_CLS_DESC as ahfs_dsc, dd.LABEL_NAME as lbl, dd.STRNGTH_NUM as strngth, dd.STRNGTH_UNIT_DESC as
unt, dd.SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, dd.SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc, dd.GCN_NUM as gcn,
pcf.PRSCRPTN_NUM as rx_num, SUM(pcf.INGRDNT_AMT) as rx_ingrd, SUM(pcf.PD_AMT) as rx_paid, SUM(pcf.UNIT_SRVC_CNT)
as rx_cnt, SUM(pcf.DSPNSD_QTY) as rx_qty, SUM(pcf.DAY_SUPLY_CNT) as rx_day FROM PHRMCY_CLM_FACT pcf,
MBR_ID_DMNSN mid, DRUG_DMNSN dd, PRVDR_DMNSN pd, BIPLR_UP_V1 blpr WHERE (BIPLR_UP_V1.mbr_id =
MBR_ID_DMNSN.UNIQ_MBR_ID) And (PHRMCY_CLM_FACT.FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN.FINL_CLM_KEY) AND
(PHRMCY_CLM_FACT.MBR_KEY = MBR_ID_DMNSN.MBR_KEY) And (PHRMCY_CLM_FACT.BNFT_KEY = MBR_BNFT_DMNSN.BNFT_KEY) And
(PHRMCY_CLM_FACT.DRUG_KEY = DRUG_DMNSN.DRUG_KEY) And (PHRMCY_FINL_CLM_DMNSN.CLM_ORGN_CD IN ('M','A')) AND
(PHRMCY_CLM_FACT.LAST_SRVC_DT BETWEEN '01JUN2007' and '30SEP2009').
NOTE: PROC SQL set option NOEXEC and will continue to check the syntax of statements.
165 execute (drop table biplr_up_v1) by rosdwp;
NOTE: Statement not executed due to NOEXEC option.
166 disconnect from rosdwp;
NOTE: Statement not executed due to NOEXEC option.
167 quit;
NOTE: The SAS System stopped processing this step because of errors.
NOTE: PROCEDURE SQL used (Total process time):
real time 0.24 seconds
cpu time 0.02 seconds
168
Edited by: user12142482 on Nov 2, 2009 4:02 PM

ORA-00936: missing expression

Hi All,
i using SQl Query to insert value from one table to another but Show me Error MISSING EXPRESSION.
i have 35 Column in crm_sales_customers Table and 65 column in VENDOR_CUSTOMER_MAS table ,i want to jus insert selected column value in table VENDOR_CUSTOMER_MAS
insert into crm_sales_customers(customer_name,customer_address1,customer_address2,customer_city,customer_state,customer_country,customer_postal_code,customer_web_site,phone1,phone2,email,
active_flag,cust_id,UPLOAD) values(select name,address1,address2,CITY_CODE,null,country_code,pin_no,web_site,PHONE_NO1,FAX_NO,EMAIL,active_flg,code,'Y' from VENDOR_CUSTOMER_MAS)I am runing this Query in SQL command.
How to solve this problem..
Thanks
Edited by: 805629 on Feb 2, 2011 9:20 PM

Hi,
The problem with the above query is your syntax. Take a look here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_9014.htm#i2111652
When you do an insert from query, you dont need the 'values' clause.
insert into my_table (col1, col2, etc)
select col1, col2, etc
from other_Table
where some_conditionbtw, this is not an Apex problem, more an SQL.
Ta,
Trent

"java ODBC Microsoft Access Driver Syntax error (missing operator) in query

Hi I am new to java and I am getting this error message when using java to access and insert data into an MS Access database.
"java ODBC Microsoft Access Driver Syntax error (missing operator) in query expression"
The commands are
String insertCommand = "INSERT into MetricOutput(A1,A,DRR,DeRR,RE,WDRR,WDeRR,WRE,ARF,SRF,HRF,WARF,WSRF,WHRF,SDC,WSDC,MAR,WMAR,H1,H11,H2,H21,cluster) "+
"VALUES("+comMappedCount+","+stdCount+","+DRR+","+DeRR+","+RE+","+WDRR+","+WDeRR+","+WRE+","+ARF+","+SRF+","+HRF+","+WARF+","+WSRF+","+WHRF+","+SDC+","+WSDC+","+MAR+","+WMAR+","+H1+","+H11+","+H2+","+H21+",+array)";

"VALUES("+comMappedCount+","+stdCount+","+DRR+","+DeRR+","+RE+","+WDRR+","+WDeRR+","+WRE+","+ARF+","+SRF+","+HRF+","+WARF+","+WSRF+","+WHRF+","+SDC+","+WSDC+","+MAR+","+WMAR+","+H1+","+H11+","+H2+","+H21+",+array)";After looking at your post in the editor, I see what your real query looks like. You realize that ",+array[i])" is part of the query, right? And not actually looking at your Java array?

ORA-00936: missing expression in HTMLDB

Hello,
I have created a report based on a table
Initially this page comes up fine
When I do "Insert another record" and come back to this report page using "back" button, I get the message
failed to parse SQL query:
ORA-00936: missing expression
Clicking the Reset button displays the page as expected
Is there any way by which I can reset the report page each time before redering
So that the end-user doesnt have to click the Reset button
I dont see any SQL error in this as "Reset" brings things to normal
Please let me know the way to get rid of this unpleasant message
Thanks

Since you have not posted the output from "show errors;", my initial guess about the error would be for the "date" variable that you have declared. Try renaming that column to say date1.

[SQL Question] ORA-00936: missing expression --- Possible Error on subquery

I have one query that is basically three subqueries together.
If I separate them, they run correctly, but once I put them together I get the Oracle error:
ORA-00936: missing expression
select associate_id, application_id, entity_id, profile_id, language, neutrals,
created_date, sf_completed_date, completed_time, parent_respondent, parent_aid, attempt, parent_attempt,
reported_top1, reported_top2, reported_top3, reported_top4, reported_top5, top1, top2, top3, top4, top5
     from profiles p1
          where sf_completed_date < to_date('15-aug-2006 00:00:00','DD-MM-YYYY HH24:MI:SS')
          and parent_respondent is null
          and parent_aid is null
          and neutrals < 155
          and p1.attempt in
(select nvl(max(attempt),0)
     from profiles p2
          where p2.associate_id = p1.associate_id
          and p1.associate_id in)
(select p1.associate_id, count(*) as count
     from
(select top1 as theme
     from p1.profiles
     union all
select top2 as theme
     from p1.profiles
     union all
select top3 as theme
     from p1.profiles
     union all
select top4 as theme
     from p1.profiles
     union all
select top5 as theme
     from p1.profiles)
     group by theme);
I'm using Golden, and this is the SQL where the error is happening:
and p1.associate_id in)
(select p1.associate_id, count(*) as countWhat is the best way to get this to run? Is it something with the way the subquery is written?
thanks

Try this:
and   p1.attempt in (select nvl(max(attempt),0)
                     from   profiles p2
                     where p2.associate_id = p1.associate_id
                     and p1.associate_id in
                       (select p1.associate_id
                             , count(*) as count
                        from (select top1 as theme
                              from   p1.profiles
                              union all
                              select top2 as theme
                              from   p1.profiles
                              union all
                              select top3 as theme
                              from   p1.profiles
                              union all
                              select top4 as theme
                              from   p1.profiles
                              union all
                              select top5 as theme
                              from   p1.profiles
                        group by theme
;

ORA-00936 Missing expression - error in composite statement

I'm using the following statement to call a function which uses a number retrieved from a table i.e.
SELECT GETNEXTBUSINESSDATE(TO_DATE('28/08/2003','dd/mm/yyyy'), TO_NUMBER(SELECT VALUE1 FROM PARAMETERS WHERE PARCODE = 'CCR1' AND ATTRIBUTE1 = 'CCRNRQST1')) FROM DUAL;
The function adds the value store in the value1 field to a date to get the next buisness date. The above statement is giving me an ORA-00936 Missing expression error message.
Can anybody help ?

We can't pass a query as a parameter.
You'll have to write a function that accepts PARCODE and ATTRIBUTE1 as parameters, or figure some other way of getting the value.
As I typed that, it occurred to me that this might work:
SELECT GETNEXTBUSINESSDATE(TO_DATE('28/08/2003','dd/mm/yyyy')
      , x.val1)
FROM ( SELECT TO_NUMBER(VALUE1) as val1
       FROM   PARAMETERS
       WHERE PARCODE = 'CCR1'
       AND ATTRIBUTE1 = 'CCRNRQST1') x;I'm not guaranteeing anything as I've never tried running a function from an in-line view.
Cheers, APC

Missing expression Error using pivot function

Hi,
When i am running the query:
The query needs to display name and total:
{select *}
{ from (select name,nvl(sal,0) tot from tablea }
{                          GROUP BY name,nvl(sal,0) }
{ pivot(SUM(tot) for name in (select ltrim(sys_connect_by_path(''''||name||'''', ','), ',') str}
{from ( select row_number() over(order by name) rn}
{       ,      name}
{       from tablea}
{where connect_by_isleaf=1}
{start with rn=1}
{connect by rn=prior rn+1);}
When running the above query its giving error:
ORA-00936: missing expression at line select ltrim(sys_connect_by_path
Any help will be needful for me

If you use pivot, you have to hardcode all your values in the FOR IN clause.
SQL> select *
2   from (select ename,nvl(sal,0) tot from emp
3   GROUP BY ename,nvl(sal,0)
4   )
5   pivot(SUM(tot) for ename in ( 'SCOTT' ,'KING') )
6 ;
   'SCOTT'     'KING'
      3000       5000You can't substitute the literal list of values (in my example ('SCOTT','KING') with a subquery producing similar result.
Only with pivot xml you can put there a subquery, in that case, the result however doesn't have to be in form of comma separated values (like you try to achieve with sys_connect_by_path)
SQL> select *
2   from (select ename,nvl(sal,0) tot from emp
3   GROUP BY ename,nvl(sal,0)
4   )
5   pivot xml (SUM(tot) for ename in ( select ename from emp where ename like 'S%' ) )
6 ;
ENAME_XML
<PivotSet><item><column name = "ENAME">SCOTT</column><column name = "SUM(TOT)">3000</column></item><
item><column name = "ENAME">SMITH</column><column name = "SUM(TOT)">800</column></item></PivotSet>Best regards
Maxim

Missing expression in query

Similar Messages

Maybe you are looking for