Missing EXS Samples when upgrading from LP7 to Studio

I performed a full upgrade from Logic 7 to Studio which seemed to go flawlessly. However, when accessing many of the EXS factory sounds I have recieved error messages telling me that certain audio files are missing and the instruments fail to load. Very frustrating as I have many older songs that require these samples and I can't find them anywhere. Some of the missing samples are legacy instruments but there are many missing from the new set, such as Steinway & Pad. Any ideas? I'd rather not do a reinstall if possible...

Yes, this is an installer issue, and has been talked about here in many many threads.
Reinstall, reinstall GB4, or re-install the missing content manually using Pacifist, is the quick solution. If you want all the details, do some searches, as there are hundreds of posts on this issue when people starting upgrading to Logic Studio.

Similar Messages

Retrieving Missing Sync Settings When Upgrading From an Older Version of Firefox to the latest version.

I initially set up my Sync account using an add-on for an older version of Firefox and have since upgraded to the latest version. But now my browser acts as if I don't have a sync account set up at all. When I attempt to create a new account, it says that my email address is already being used which tells me that my sync information is still on the the servers. So how do I retrieve my sync settings when settings are missing within my browser?

I resolved the problem in Snow Leopard by logging out of my (admin) account and logging into my daughter's account on the same machine. She doesn't have admin privileges, so when I tried to install Firefox 4 in her account, I had to authenticate with my admin identity and PW. Installation went smoothly after that. My guess is that you could also simply create a new account on the same machine and install Firefox 4 from that. I have no idea why this works.

How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5

When upgrading from a iPhone 3G to an iPhone 4 or soon 5
How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
Will it transfer my text messages also?
Is this a nightmare or an easy task?

Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
http://support.apple.com/kb/ht1766
http://support.apple.com/kb/ht1414

Error ORA-03113 when upgrading from 11.2.0.1 to 11.2.0.3

I keep on getting this error when upgrading from 11.2.0.1 to 11.2.0.3
[Thread-57] [ 2012-04-20 13:18:28.207 CEST ] [SummarizableStep.genSummary:409] Generating Summary for:=Pre Upgrade ,status is:=Successful
[Thread-57] [ 2012-04-20 13:18:28.208 CEST ] [SummarizableStep.genSummary:409] Generating Summary for:=Oracle Server ,status is:=Failed
oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
Upgrade failed due to running the step "Upgrading Oracle Server"
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
        at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
        at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
        at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
        at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
        at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
        at java.lang.Thread.run(Thread.java:637)
[Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [SummarizableStep.executeImpl:212] Throwing exception e from SummarizableStep
[Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@4805e9f1
oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
Upgrade failed due to running the step "Upgrading Oracle Server"
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
        at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
        at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
        at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
        at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
        at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
        at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
        at java.lang.Thread.run(Thread.java:637)
[Thread-57] [ 2012-04-20 13:18:31.000 CEST ] [CompManager.isModeSet:9822]   DB Upgrade Mode Setting := 1
[Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [CompManager.isModeSet:9823]   Mode := 1 is set
[Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [SQLEngine.done:2189] Done called
[Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [Database.getStepSQLInterface:787] OH in database: /app/oracle/product/11.2.0.3/db_1Any clues about what could be wrong? I am planning to upgrade with the manual steps if it does not work :(

Pl post OS details - are you using DBUA to upgrade ? Are there any errors in the database alert log ?
ORA-00600 [kodpunp-nulltds], ORA-00600 [kokeeiix1], [600] When Upgrading To 11GR2 [ID 1367827.1]
HTH
Srini

When upgrading from OS X lion to OS X mountain lion will it automatically uninstall OS X lion

when upgrading from OS X lion to OS X mountain lion will it automatically uninstall OS X lion?

Yes. You download Mountain Lion from the App Store and, once the download is complete, the installation of Mountain Lion will begin. You can quit it at this point and backup the "Install OS Mountain Lion.app" (which I suggest) the double-click it and begin the installation.
All remnants of Lion will be gone and you'll be running Mountain Lion.
Good luck,
Clinton

Best practice for Smartview when upgrading from Excel 2003 to Excel 2007?

Does anyone know the best pratice for Smartview when upgrading from Excel 2003 to Excel 2007?
Current users have Microsoft Excel 2003 with Smartview 9.3.1.2.1.003.
Computers are being upgraded to Microsoft Excel 2007.
What is the best pratice for Smartview in this situation?
1. Do nothing with Smartview and just install Excel 2007.
2. Install Excel 2007 and then uninstall and reinstall Smartview
3. Uninstall Smartview, Install Excel 2007, and then install Smartview
4. Somthing else??
Thanks!

We went with option 1 and it worked out fine. Be aware that SV processes noticeably slower in Excel 2007 than 2003. Many users were/are unhappy with the switch. We haven't tested SV v11 yet, so I'm not sure if it has improved performance with Excel 2007 or not (hopefully it does).

When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert! This update requires OS X version 10.8.

When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert! This update requires OS X version 10.8.

Sounds like you downloaded the 10.8.1 update instead of the Mountain Lion installer from the Mac App Store.
You have to purchase Mountain Lion from the App Store to get to 10.8

[RESOLVED] "Isolinux.bin missing or corrupt" when booting from USB.

Just giving root cause explanation and resolution to closed topic:
https://bbs.archlinux.org/viewtopic.php?id=107241
where "Isolinux.bin missing or corrupt" when booting from USB. I hope maybe someone will find it rather than closed topic 107241 :-(
Windows DD and unetbootin-windows are created for single ISO partition. That's why old Archlinux like 2010-05 will run.
The newest one archlinux-2014.01.05-dual.iso will not work like that because there is UEFI pre-boot (two partitions). That's why it can't find then Isolinux.bin and report it's missing. Of course this kind of issue will appear on old motherboard without / old UEFI support as they can't understand bootstrap and real root fs later.
unetbootin tool is partition driven so it can't do split well 32 UEFI + remaining root.
Resolution:
If you really don't have any Linux based machine to use Linux DD there is work around:
1. Install WIndows Virutalbox and extension pack
2. Download latest Archlinux ISO and run VM from it + USB support map real pendrive
3. In guest VM booted form Arch ISO just run DD if=/dev/sr0 of=/dev/sda (pay attention that SDA is real USB device then).
4. Wait about 8minutes. halt. unplug usb. Voila.
Last edited by varsovie (2014-01-15 22:20:37)

I am having this exact problem but with dd on Ubuntu 12.04 (my main distro on my main machine).
Perhaps my version of dd is too old?

How do I save itunes when upgrading from osx4 to osx5 ?

how do I save itunes. bookmark, when upgrading from osx4 to osx5?

When you upgrade attached to iTunes a backup copy is made...then after the upgrade the backup is used to restore all the content to your iDevice, assuming you are actually talking about upgrading from iOS 4 to iOS 5.

Any Guidelines/Documents: when upgrading from BW 3.x to Netweaver 7.0?

Hi,
Any Guidelines/Documents: when upgrading from BW 3.x to Netweaver 7.0?
Thanks

hi Amanda,
this should help a lot
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
also check
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7

Serial number not valid when upgrading from LR4 to LR5 [was:leewayphotography]

J’ai acheté LR 4 il y a 1 an avec le n° de série sur la boite. J’ai acheté l’upgrade pour LR 5 et je n’ai jamais pu installer la version définitive avec ce n° de série.Ce n° de série n'est pas valide. La durée version d’essai est terminée et donc je dois retourner à LR 4 pour continuer à travailler ? Pourquoi cela ne fonctionne pas?

Bonjour.
J'ai bien compris votre réponse qu'il fallait utiliser un nouveau n° de série. J'ai bien téléchargé LR5 le 18 mars 2014, j'ai bien reçu une facture
n° IEE2014000174985 mais je n'ai pas de trace d'un nouveau n° de série. Il n'est pas sur la facture, ni dans le logiciel?
Que faut-il faire
Leewayphotography
From: John Waller
Sent: Monday, April 21, 2014 10:14 PM
To: leewayphotography
Subject: Serial number not valid when upgrading from LR4 to LR5 was:leewayphotography
Re: Serial number not valid when upgrading from LR4 to LR5 was:leewayphotography
created by John Waller in Photoshop Lightroom - View the full discussion

Lost bootcamp capability when upgrading from OS X Mavericks to OS X Yosemite 10.10?

When upgrading from OS X Mavericks to OS X Yosemite 10.10 while dual booting with Windows 7 on my bootcamp partition, I can't access the Windows partition any more. When I restart my computer and hold the alt key the only drives that are shown are my Mac OS X and Recovery (usually there is the bootcamp drive there too). Does anyone have any solutions? I can still access my windows 7 files from within my Mac partition weirdly enough. And if there aren't any solutions, is bootcamp broken on Yosemite? Is it safe to redo the process and put a fresh Windows 7 or Windows 8 partition back on bootcamp again? I'm not tech savvy enough to understand all of the coding components so if you want to walk me through it you can, or just provide a simple explanation, any help is grateful. Thanks for your help.

Welcome To Discussions Dedesu!
Here is some additional info.
Tiger is available for purchase at The Apple Store (U.S.).
If you know what to look for, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some additional online Apple retailers, like Amazon, FastMac, etc, and as posted, eBay.
As also posted, be sure not to purchase grey, upgrade or machine specific CDs or DVDs. They will not work.
Panther is only on CDs, not DVDs.
Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
Additional info here Using OS X Install CDs/DVDs On Multiple Macs.
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the Tiger System Requirements, you could also consider installing that, and then use the PPC 10.4.9 Combo Update, to upgrade to the current version.
Panther Install & Upgrade Hints
Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media."
AppleRescue, also sells a Tiger installation set on CD.
Shop Carefully, Examine All Documentation, And I Wish You Success!
ali b

Abap issues when upgrading from 4.7 to ecc6.0

hello All,
I am posting this question with intention of general issues we face that are abap related when upgrade from 4.7 to ECC6.0,
do the programs ahve to be adjusted, if sumone cud also throw some light on what is unicode and wat role does it play in the upgrade,
some specific examples wud be appreciated
thanks,
RS

hi,
Go through this
Unicode is an international standard that assigns characters from virtually every
language and script a unique Unicode Scalar Value, which is a number written in
hexadecimal notation.
     Character     Unicode Scalar Value     Unicode Character Name
     A      U+0041          LATIN CAPITAL LETTER A
     Ä     U+00C4          LATIN CAPITAL LETTER A WITH DIAERESIS
     α     U+03B1          GREEK SMALL LATTER ALPHA
Implementing the Unicode standard enables a single software product or a single
web site to be accessed across multiple platforms, languages, and countries without
the need for re-engineering. It allows data to be transferred across many different
SAP and non-SAP systems without corruption. To meet these requirements, the SAP
Unicode team continues to promote Unicode-enabled SAP systems, aid their
installation, and provide tools and full technical support for the smooth
conversion of existing SAP non-Unicode systems to Unicode.

Upgrading from Logic 8-Studio

can I upgrade Express to Studio? or do I need Logic 8 (full)?

Yes, you can upgrade from Express to Studio. See here.

Over 1100+ BBM Contacts PIN Missing when upgrading from 9780 to Z10

Hi
Please help, I've lost over 1100 BBM Contacts, when upgrading using the Blackberry User ID, and when I reload them on my old 9780, it's not there anymore, these contacts are so important, I collected them for sales for over a year's period, very market specific and high net worth individuals which are very hard to come by.
now I only got 75 contacts on my Z10
Chronologies
At the start, there was 12 categories consisting each 100 contacts on my 9780.
First I signed in with my blackberry id on my new Z10 and transferring data from the 9780 using Blackberry Link.
and then it doesnt work, there's only 75 contacts on my z10 (I've used a dakota with the blackberry id before which has BBM 7 installed, and then switched to iPhone when the Dakota was missing, I'm guessing the 75 contacts is from when I used the Dakota)
and then I wipe out my Z10 with factory reset, I installed BBM 7 on my 9780 in the hope to restore my contacts when it auto updates my blackberry ID.
again I login with BB ID to my Z10, still got 75 contacts on my Z10, I wipe it clean again.
then I decided I wanted to revert to an older version of BBM and use local backup on my 9780, so I deleted my BBM 7 from my 9780... and reinstalled it from the Blackberry World...
And then there was no contacts on my 9780 except for the 75 contacts.
Is there any way I can restore my 1100 BBM Contacts? I've always set back up remotely when using my 9780 with BBM 6.2
Thanks, really need it

BUMP once a day

Missing EXS Samples when upgrading from LP7 to Studio

Similar Messages

Maybe you are looking for