Missing factory patches?

Hi all,
I've had Logic installed a while now, and have assumed the plugins like the ES-1, ES-P, Sculpture etc didn't come with any factory presets, other than the EXS24, which had a few. Now apparently this is not the case, and if not, I'd love to get them! Prefer not to reinstall however. Can I just download from somewhere, or pull them off the install CDs?
Plus: any good third-party stuff around?
Any help much appreciated.
daniel

Hi Daniel,
You may be reluctant to reinstall but this is definitely my preferred route. If you've failed to get the presets then there may be other things missing as well.
A reinstallation would be pretty straightforward since it shouldn't overwrite your preferences (they're only created the first time you run Logic).
Third party stuff? Huge amounts! Start here for freebies:
http://discussions.apple.com/thread.jspa?threadID=378467
Check out MacMusic.Org for commercial material.
http://www.macmusic.org/home/?lang=en
It really depends on what you want. Virtual orchestra? Sound treatments? Soft synths?
Have fun!
Pete

Similar Messages

How to find which server is missing a Patch

So I have a SharePoint 2010 Farm with 10 Servers. I have been put in charge of making sure all the servers are patched and updated. I love how SharePoint 2010 has the page:
http://Server:880/_admin/PatchStatus.aspx.
However, looking at this page each server has about 100 patches. Scrolling through this list is difficult to see if one of the servers is missing a patch or has patches that other servers do not.
Now researching this almost all the answers point to using SCOM. However, I do not have access to SCOM and our company is cheap and does not want to get it.
Is there a way to export the information on the PatchStatus.aspx page in Central Admin to and excel spreadsheet?
Or does anyone see a script that can be used to find the information I need?
Thank you for any help you can give.
[email protected]

Unfortunately I can not. We are on a closed network for our Sharepoint servers.
But its great to hear that I can write a script to read the PatchStatus.aspx page!
Do you have any reference materials I can read to accomplish this goal. So far I have not been able to find which commands will read the information.
[email protected]
I put together a small article here http://superwidgets.wordpress.com/2014/08/10/getting-information-from-web-pages-via-powershell2/
to help explain how you can go about extracting information from any web page via Powershell. Hope that helps..
Sam Boutros, Senior Consultant, Software Logic, KOP, PA
http://superwidgets.wordpress.com
(Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Missing Security Patches

1) Are there any useful facilities for admins or auditors to idenitfy misisng security patches associated with oracle EBS and supporting infrastructure? I know there are websoites saying which patches are out there but I could do with some sort of "this is what you are missing" type reports.
2) Do Oracle have any useful whitepapers on best practice patch management for EBS, i.e. how to test, steps for restore if its affects anything etc.

Hussein Sawwan wrote:
release 12 EBS, 11g Oracle.The release does not matter here.
Do any of the links you provide produce a missing patches report that would be easy to read for management/non EBS adminsYes.
Patch Wizard FAQ [ID 976688.1]
New Required Patches for Patch Wizard, Patch Manager, and Oracle Application Change Management Pack for Oracle E-Business Suite Releases 11i, 12.0, and 12.1 [ID 1267768.1]
Patch Wizard Overview Videos [ID 1210479.1]
Patch Wizard : Overview [ID 1077813.1]
Diagnostics Toolbox: Recommended Patch List and Patch Wizard [ID 1196135.1]
Oracle Applications Patching Procedures
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121adpp.pdf
http://forums.oracle.com/forums/search.jspa?threadID=&q=Patch+AND+Wizard&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
http://search.oracle.com/search/search?search_p_main_operator=all&group=Blogs&oq=Patch+Wizard&x=0&y=0&q=Patch+Wizard+weblog%3A%3DstevenChan+site%3Ablogs.oracle.com
Thanks,
HusseinThanks Hussein,
I am going to read through those links, but could you do me a bit of a cheat sheet on how to get a report on all missing security patches for our EBS and supporting infrastructure, and what it will look like. I.e. a basic 1-5 steps on where to get this report.

Sales office data missing after patching in CRM

Hi,
We have CRM 4.0 for internet sales.
Recently, we patched our Development and QA CRM systems from SAPKU40009 to
SAPKU40016.
Immediately after the patching, we see that the Sales office information in the BP (Sales area- organization tab) is missing. We have only one Sales org and Dist channel with division not active. All the sales office belong to the same sales org. Nothing has changed w.r.t org model before and after patching and all the org units are checked for determintation.
Everything was working before the patching. Just after patching, we find the sales office information blanked out in the BP and as well as the drop down list is empty.
I can see the sales office table entries for all the BPs in CRMM_BUT_SET0140. But when ichange the BP data (for some other field) and save, the table entries get deleted as i am not able to assign the sales office any more.
We have not buffered the attributes. I tried that also and ran the report HRBCI_ATTRIBUTES_BUFFER_UPDATE, but it is of no use.
Can somebody help?
Thanks
Shankar

Hi ,
What you can do is,
Create a request for a material whose Sales Area data is missing in
CRM , and perform the request load in transaction:R3AR4.
And please check whether sales area data flows to CRM.
Put a filter in txn:R3AC1, to download single material or material
range.And before performing an initial load in txn:R3AS,please make
sure that sales area data is missing in CRM.Now, perform the initial
load in txn:R3AS.And please check whether sales area data flows to
CRM.
Check the filter settings in transaction R3AC1 for
object MATERIAL and please make sure that it would bring down all
the expected materials from R/3 along with the sales area data. I guess there is some
filter setting which is blocking it.
Please check the entries you have maintained in table MVKE - the entries
for the sales data maintained here must match with the ones maintained in the
filters.
thanks & regards,
Krishnen
Edited by: Krishnen Subramanian on Aug 9, 2011 8:47 AM

Sol 9 smpatch missing some patch names from analyze results

when running smpatch analyze -x idlist=patches_to_analyze (which contains 9 patches), some of the results are missing their names:
bash-2.05# smpatch analyze -x idlist=patches_to_analyze
118322-01
112233-12 SunOS 5.9: Kernel Patch
112912-01 SunOS 5.9: libinetcfg Patch
115683-03 SunOS 5.9: Header files Patch
114344-21 SunOS 5.9: kernel/drv/arp Patch
113207-12
112392-08
117171-17 SunOS 5.9: Kernel Patch
113859-04 SunOS 5.9: Sun ONE Directory Server 5.1 patch
114129-02 SunOS 5.9: multi-terabyte disk support -libuuid patch
114127-03 SunOS 5.9: abi_libefi.so.1 Patch
113073-14 SunOS 5.9: ufs_log patch
112963-25 SunOS 5.9: linker patch
112785-56 X11 6.6.1: Xsun patch
Is this common?
I know that it's working, since it's returning more than the 9 that went in, but I'd like to get the info for every patche returned by the analysis.

Neither of the three patches without descriptions above are listed in the patchdb.zip file. As such there is no metadata available for them. I assume then that they must be listed in the requirements of one or more of the other patches.
Anyway, the reason ther is no descriptions is that they are not listed in the patchdb.zip file and as such no metadata is available to be presented.

PDFMaker Missing after patching 8.2.6

After I patched Acrobat 8 Standard from 8.2.5 to 8.2.6, user can not convert document to pdf format. It had an error "PDFMaker missing...need to repair Acrobat 8" Repair and doesn't work. Any suggestion or fix on this? Thank you in advance.

Hi Devyani:
Thank you for your reply. I checked this post (http://forums.adobe.com/thread/792314) and did some testing on user computer. Directly using Acrobat 8 Standard to convert did not work. Instead uses the application (Office 2010) print function to print the document into pdf format work fine; and user was satisfied with it.

Missing Baseline Patches

Hi Guys,
We have just started testing with ZCM Patch Management and experience a problem with our Baselinepatches. We are currenly at ZCM 10.3.2. and clients are Windows XP SP3 and have the Adaptive Agent 10.3.2.41992. What is happening is that we started testing with a small Baseline of 26 Microsoft Critical patches which is applied to a testgroup. These 26 critical Microsoft patches all show as vulnerabilties for these clients.
This testgroup has about 10 clients as members. Of these 26 patches only 13 are being implemented at these clients, the other 13 patches are never installed at these clients.
We have no problems with the Patch Management Process itself. The subscription service is working fine and is scheduled daily. The Discover Applicable Updates Windows-x86-nl-XPsp3 Patch Bundle is working, Patch Managemement is running on the clients and the Clients get the Fingerprints correctly which are being presented in ZCC in the Patches Tab of the Workstation objects.
The 26 mentioned Baseline patches are:
1. MS 940289 (Dutch) Office Compatibility Pack Service Pack 1
2. MS 942288 Windows Installer 4.5 (All Languages)
3. MS 953331 (Dutch) Office Compatibility Pack Service Pack 2 (Rev 2)
4. MS 973472 Workaround for Vulnerability in Microsoft Office Web Components
5. MS10-031 Security Update for Microsoft Office XP (KB976380)
6. MS10-045 Security Update for Microsoft Outlook 2002 (KB980371)
7. MS10-063 Security Update for Microsoft Office XP (KB2288608)
8. MS10-079 Security Update for Microsoft Word 2002 (KB2328360)
9. MS10-080 Security Update for Microsoft Excel 2002 (KB2345017)
10. MS10-087 Security Update for Microsoft Office XP (KB2289169)
11. MS10-088 Security Update for Microsoft PowerPoint 2002 (KB2413272)
12. MS10-096 Security Update for Windows XP (KB2423089)
13. MS10-097 Security Update for Windows XP (KB2443105)
14. MS10-099 Security Update for Windows XP (KB2440591)
15. MS10-103 Security Update for Microsoft Publisher 2002 (KB2284692)
16. MS10-105 968095 2289162 (Dutch) Security Update for Microsoft Office 2002
17. MS11-002 Security Update for Windows XP (KB2419632)
18. MS11-003 Cumulative Security Update for Internet Explorer 8 for Windows XP (KB2482017)
19. MS11-006 Security Update for Windows XP (KB2483185)
20. MS11-007 Security Update for Windows XP (KB2485376)
21. MS11-010 Security Update for Windows XP (KB2476687)
22. MS11-011 Security Update for Windows XP (KB2393802)
23. MS11-012 Security Update for Windows XP (KB2479628)
24. MS11-013 Security Update for Windows XP (KB2478971)
25. MS11-014 Security Update for Windows XP (KB2478960)
26. Microsoft Office Compatibility Pack Service Pack 2 (SP2)
Of these, the following 13 patches are never installed on these clients:
12. MS10-096 Security Update for Windows XP (KB2423089)
13. MS10-097 Security Update for Windows XP (KB2443105)
14. MS10-099 Security Update for Windows XP (KB2440591)
16. MS10-105 968095 2289162 (Dutch) Security Update for Microsoft Office 2002
17. MS11-002 Security Update for Windows XP (KB2419632)
18. MS11-003 Cumulative Security Update for Internet Explorer 8 for Windows XP (KB2482017)
19. MS11-006 Security Update for Windows XP (KB2483185)
20. MS11-007 Security Update for Windows XP (KB2485376)
21. MS11-010 Security Update for Windows XP (KB2476687)
22. MS11-011 Security Update for Windows XP (KB2393802)
23. MS11-012 Security Update for Windows XP (KB2479628)
24. MS11-013 Security Update for Windows XP (KB2478971)
25. MS11-014 Security Update for Windows XP (KB2478960)
These 13 patches remain visible in ZCC in the Patches tab of the devices with a Green color and the status "Not Patched". I also checked the status of the missing Patches locally on the clients, they are definitive not installed locally. We tried Multiple refreshes of the Adaptive Agent, used the "Recalculate Baseline" option multiple times and tried clean imaging and a clean import in the zone of these clients. Just waiting for a few days to see if the process is running later makes no difference. We also tried the "Update cache" options several times for these 13 patches in ZCC.
I noticed the following things on the clients:
1. In the "Bundles" option of the properties of the Adaptive Agent on these clients the missing patches are not shown.
2. I checked the c:\program files\Novell\zenworks\zpm folder on the clients and noticed that for all the 26 Patches the corressponding .PLS files are present. For the 13 Patches that are being installed i also noticed a corresponding .pls_results.txt files which has only one line: SUCCES. For the 13 missing patches no such files exists.
So we do not seem to be able to install these critical Microsoft Patches on the clients. Does anyone has any suggestions we could try?
Thanking you in advance for your suggestions,
Marcel van den Berg
Netherlands

janbrouwer,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Logic missing some patches

I bought and downloaded Logic Pro. Some of the patches seem to be missing something. Half the notes on the keyboard DO NOT WORK. Its like all the elements that make up some of the patches did not complete. Of all the sounds in the app, I think I have found about 10 that have this problem. How I fix this. Thanks.

Here is an example of a file that plays 5 notes across the whole 61 note keyboard. Its looking for more files that make up the complete patch.

Find missing security Patches

Hello team,
Is there anyway to find out all the security patches we are missing in our production environment.
Thanks
Ammu

Please refer to (Oracle E-Business Suite Releases 11i and 12 Critical Patch Update Knowledge Document (October 2013) (Doc ID 1585639.1)).
You can identify the missing patches by following the same approach for identifying them at each tier node (i.e. query AD_BUGS, use "opatch lsinventory", ..etc).
Thanks,
Hussein

JCo missing after patching the system

Hi
We have gone for pataching the Portal and ESS. We see that after patching there is only Selfservicgenerics and HumanResources Jco appearing. All other JCo,s are missing from the system. Is this normal behavior ??
How do we get other JCo appear asthey were already configured before.

Hi Purav,
I think yuu need me create manually as per your required JCO for ESS/MSS applciation.
Try to check in the SLD if all earlier JCO's available
Thanks
Arun

Missing Novell Patches like iPrint

I'm trying to find Novell iPrint client patches, but so far came to the conclusion that those are not included in ZPM. :/
The only patch that includes the word 'Novell' is this one:
Novell 130328 Novell Client 2 SP3 (IR1) (All Languages) (See Notes) Mar-28-2013
The iprint 5.90 patch i'm looking for fixes another security fix, CVE-2013-1091 - Security Vulnerability - Novell iPrint Client Stack Buffer Overflow Remote Code Execution Vulnerability.
So this is one of the patches i at least expect ZPM to be able to patch.....
Am i overlooking something or can someone confirm this in their setup?

Shaun,
Yeah thats definitly a sad thing.... Atleast make your own patches available to the patch management system you sell .
I noticed some client updates, but not all either. Like the last one that fixes CVE-2013-3697.
I made a feature request at lumension.com, but this should be a novell task. :/

Missing microsoft patches

Looks like since may 8 microsoft patches are not showing correctly in zcc as patched or unpatched, all workstations show zeros for both counts. Other products, adobe, apple etc have released patches since may 8 and patched/unpatched stats are populating in PM. If I look in the debug.log file for a patch released on may 14 (ex KB2829361) the entry is found for MS13-046 KB2829361.pls. The servers are version 11.1a, managed devices range from 10.2.2 up to 11.1a and all have this issue with Microsoft patches. Anyone else seen this behavior ?

dtemple-sgi wrote:
>
> Ended up deleted all the .pls files from
> /opt/novell/zenworks/zpm/signatures/windows, deleted the DAU bundles
> and kicked off a new patch subscription update. Seems to have fixed
> the issue.
Yes, sometimes this happends - looks like it thinks the patch is there
but it's not. Easy workaround though...
Niels
A true red devil...

Missing "The Patch" - Error 1635

When I was trying to make space on my computer (Windows XP) a while back by removing a lot of excess Adobe stuff, I obviously removed something crucial. Now I am unable to access things I need to access. Whether trying to install an update, or remove so I could maybe reinstall, no matter what I did, I got this message:
"This patch could not be opened. Verify that the patch exists and that you can access it or contact the application vendor to verify that this is a valid Windows Installer patch package." Error 1635
Of course I have no clue what any of this means. What patch? Where is it? Where do I get it? The Adobe website only gave me a headache, and the call to a tech person ended with them wanting money to go further and me definitely not being in the mood.
Would be grateful for any help. Thanks.

Thanks, Ankit. I followed your link to the article, which talked about an installer package. But when I clicked on "read more", it said that they took away the link to download because some number of people found that it had corrupted other things.
Any other ideas?

Create a Collection of machines missing a single patch MS07-042

Good Morning All,
   I am trying to create a collection for all machines missing a single patch. MS07-042. This patch has multiple KB numbers.
I noticed a couple of odd occurances.
1) Console query builder does not expose the Updates classes.
2) Console query builder does expose all the ITMU classes. I am not sure if these are populated with the WSUS information gathered by the WUA.
I did create the following query
select *
from SMS_R_System inner join SMS_UpdateComplianceStatus on SMS_UpdateComplianceStatus.MachineID = SMS_R_System.ResourceId
   inner join SMS_Softwareupdate on SMS_Softwareupdate.CI_ID = SMS_UpdateComplianceStatus.CI_ID
where SMS_Softwareupdate.BulletinID = "MS07-042"
However, I am unable to locate any documentation on what the Status Fields indicate in SMS_UpdateComplianceStatus.
My Questions
1) Is there an easier way to do this?
2) Is there any documentation on what the fields mean in SQL?
I look forward to blogging about this as soon as I am sure of an answer.
Best
Shaun Cassells
http://myitforum.com/cs2/blogs/scassells/default.aspx

Torsten, do you have a refrence for the SMS_UpdateComplianceStatus table? I want to know what the Status Field values represent.
I realize this is an old thread, but I just wanted to put in my $0.02 in case someone else stumbles upon it looking for info.
So, the SMS_UpdateComplianceStatus class (cuz we're talking collections here, which is WQL and pulls from WMI classes) is really the equivalent of the v_UpdateComplianceStatus view. So if you want to see what's in that, go to SQL and query it.
Also, if you want to know what the Status field values are, you can find those by looking at the v_StateNames view from SQL too where TopicType = 400 I believe.
State 0 = Unknown
State 1 = Not Required (meaning doesn't have patch and doesn't need it)
State 2 = Not Detected (meaning it doesn't have patch but needs it)
State 3 = Detected (meaning it has this patch)
So, if you want to create a collection of machines that are missing a patch, you could do something like this:
SELECT
SMS_R_SYSTEM.ResourceID,
SMS_R_SYSTEM.ResourceType,
SMS_R_SYSTEM.Name,
SMS_R_SYSTEM.SMSUniqueIdentifier,
SMS_R_SYSTEM.ResourceDomainORWorkgroup,
SMS_R_SYSTEM.Client
FROM
SMS_R_System
JOIN SMS_UpdateComplianceStatus
    ON SMS_R_System.ResourceID = SMS_UpdateComplianceStatus.MachineID
    AND SMS_UpdateComplianceStatus.Status = 2
JOIN SMS_SoftwareUpdate
    ON SMS_UpdateComplianceStatus.CI_ID = SMS_SoftwareUpdate.CI_ID
    AND SMS_SoftwareUpdate.ArticleID = 832671
Number2 - (John Nelson)
Microsoft MVP (2009) - System Center Configuration Manager
http://number2blog.com

How to apply business rules with out breaking to patch missing data

Hello Experts,
I am very new to SQL And i have no idea how to apply below rules
Data is polling for every 5 minutes so 12 time intervals per hour 6:00 -->1
6:05---->2
6:50---->11
6:55---->12
6:50---->11
Missing value
Patching
Rule
No values missing
No patching
0
Time interval 1 is null
Time interval 1 is patched with the value from time interval number 2 subject to this not being null.
1.1
Time interval 12 is null
Time interval 12 is patched as the value of time interval 11 subject to this not being null.
1.2
Time intervals 1 and 2 are null
Time interval 1 and 2 are both patched with the value of time interval 3 subject to this not being null
1.3
Two consecutive time intervals (excluding both 1 & 2 or both 11&12) are null e.g. time interval 3 and 4 are null
Average the preceding and succeeding time intervals of the missing 2 values. If time intervals 3 and 4 are null then these become the average of time intervals 2 and 5.
1.4
Time intervals 11 and 12 are missing
Time interval 11 and 12 are both patched with the value of time interval 10 subject to this not being null
1.5
Some time intervals between 2 and 11 are null with 6 or more non null time intervals
Time interval is patched with the average of interval – 1 and interval + 1 subject to these not being null.
For example if time interval 5 was null this would be patched with an average of time interval 4 and time interval 6
n.b this rule can happen up to a maximum of 5 times.
1.6
Three consecutive time intervals are missing
Set all time intervals for the period as null
2.1
More than 6 time intervals are null
Set all time intervals for the period as null
2.2
This will be more info table structure
CREATE TABLE DATA_MIN
DAYASNUMBER    INTEGER,
TIMEID         INTEGER,
COSIT          INTEGER,
LANEDIRECTION INTEGER,
VOLUME         INTEGER,
AVGSPEED       INTEGER,
PMLHGV         INTEGER,
CLASS1VOLUME   INTEGER,
CLASS2VOLUME   INTEGER,
CLASS3VOLUME   INTEGER,
LINK_ID        INTEGER
Sampledata
DAYASNUMBER TIMEID      COSIT     LANEDIRECTION    VOLUME    AVGSPEED PMLHGV    CLASS1vol LINK_ID
20,140,110 201,401,102,315    5    1    47    12,109    0    45    5,001
20,140,110 201,401,102,325    5    1    33    12,912    0    29    5,001
20,140,110 201,401,102,330    5    1    39    14,237    0    37    5,001
20,140,110 201,401,102,345    5    1    45    12,172    0    42    5,001
20,140,110 201,401,102,350    5    1    30    12,611    0    29    5,001
20,140,111 201,401,100,000    5    1    30    12,611    0    29    5,001
output something like FOR above sample data
DAYASNUMBER TIMEID      COSIT     LANEDIRECTION    VOLUME    AVGSPEED PMLHGV    CLASS1 LINK_ID
Rule
20,140,110 201,401,102,315    5     1    47    12,109    0    45   5,001
0
20,140,110 201,401,102,320    5    1    40    12,109    0    45    5,001
   1.4(patched row)
20,140,110 201,401,102,325    5    1    33    12,912    0    29    5,001
   0
20,140,110 201,401,102,330    5    1    39    14,237    0    37    5,001
0
20,140,110 201,401,102,335    5    1    42    14,237    0    37    5,001
1.4(patched row)
20,140,110 201,401,102,345    5    1    45    12,172    0    42    5,001
0
20,140,110 201,401,102,350    5    1    30    12,611    0    29    5,001
   0
20,140,110 201,401,102,355    5    1    30    12,611    0    29    5,001
1.2(patched row)
20,140,111 201,401,100,000    5    1    30    12,611    0    29    5,001
Any help and suggestions to extend the code to achieve would be greatly appreciate.
Note:Here the key value is Volume to be patched for missed time intervals
Thanks in advance

row_number() OVER (PARTITION BY LANEDIRECTION ORDER BY TIMEID) AS RN,DAYASNUMBER,(*to_date*(timeid,'yyyymmdd hh24miss')) as cte, COSIT,
Are you in the right place? to_date is an Oracle function, and this forum is for Microsoft SQL Server which is a different product.
Erland Sommarskog, SQL Server MVP, [email protected]

Missing factory patches?

Similar Messages

Maybe you are looking for