Missing file 5501.img after upgrade radio module

I have an AP that has been upgraded by someone else. The 802.11g interface does not come up, and an error message "*Mar 1 00:03:15.367: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/c1200-k9w7-mx.123-8.JEA/5501.img) was found" is seen. Any ideas, I suspect the radio module is not correct for this 1230 AP. I have upgrade IOS to latest version.

Hi Robert,
I am sure you are on the right track regarding the Radio Module, here is a very similar thread from last December. It seems that the new Radio module (with none of the identifying stickers) may have been intended for the wrong country (A or Japan) Have a look;
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=Getting%20Started%20with%20Wireless&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddcff38/7#selected_message
Hope this helps! Please let us know your resolution :)
Rob

Similar Messages

  • Missing files - corrupt library after upgrade to 11.1.4

    I updated iTunes to 11.1.4, and after launching, it looked like it was updating my library as it's done in the past.  However, this time, after an hour I realized it had not yet completed, and a dialogue box asking about creating an iTunes U playlist was on the screen.  I tried to do so, but it just kept repeating.  So finally I stopped it, and now I have an file marked iTunes library (damaged) and an incomplete library.  I am missing thousands of songs compared to the last .itl I have in Previous iTunes Libraries.
    I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
    How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
    Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library? 
    Thanks in advance. 

    I thought when iTunes did an upgrade to the library it was supposed to make a backup? If so, and I did the upgrade yesterday, why is the most recent file in Previous iTunes Libraries dated from four months ago?
    No, you need to do the backup as part of regular computer maintenance and before you do any software upgrades.  iTunes moves the old library into the previous library area but perhaps your update failed before it did that.
    How can I repair the damaged .itl file, as the one iTunes is using now as, as I mentioned, missing thousands of songs now.
    https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library after upgrade/crash from previous iTunes library file.
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
    Is there any sort of script or utility I can use to figure out exactly which files are missing from the current .itl in my library?
    Yes, there's one on the Dougscripts web site that will crawl through a library.  In yur case it's probably just as easy to drag the whole iTunes media folder to Automatically Add to iTunes.  Anything already in the library it will ignore.  Anything not there it will add.

  • How can I get my time machine to allow me to recover files again? After upgrading to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.

    How can I get my time machine to allow me to recover files again?
    After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
    I've searched and can not find a solution to the problem that's being encountered.

    Yeap that all makes sense now.
    Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
    Over wireless are you waiting for the indexing to finish.. ??
    Previous backup may not show for a couple of hours.
    Long short of it.. Mavericks version of TM is a pain.
    Sometimes it is easier to completely ignore the TM backup and do the restore manually.
    I have posted the details here. See if this helps.
    Can't access old files on time capsule

  • Sender File adapter - Error after upgrade to SP16 !!

    Hi ,
    After upgrade from SP14 to SP16 , i see this error in Adapter monitor in rwb. The file does not get picked up. Any ideas on how to troubleshoot this ?
    Configured at 2006-04-20 06:50:27 GMT
    History:
    - 2006-04-20 09:55:00 GMT: Retry interval started. Length: 30.000 s
    - 2006-04-20 09:55:00 GMT: Error: BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
    - 2006-04-20 09:55:00 GMT: Processing started
    - 2006-04-20 09:54:36 GMT: Error: BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
    - 2006-04-20 09:54:33 GMT: Processing started
    Is there a patch that will fix this issue ?
    Regards
    matthias isenburg

    thanks for yours tipps...
    here the output of the defaultTrace.trc:
    [EXCEPTION]
    com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
         at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0.process(ModuleLocalLocalObjectImpl0.java:118)
         at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java(Compiled Code))
         at com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0.process(ModuleProcessorLocalLocalObjectImpl0.java(Compiled Code))
         at com.sap.aii.adapter.file.File2XI.send(File2XI.java(Compiled Code))
         at com.sap.aii.adapter.file.File2XI.processFtpList(File2XI.java(Compiled Code))
         at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java(Compiled Code))
         at com.sap.aii.af.service.scheduler.JobBroker$Worker.run(JobBroker.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
         at java.security.AccessController.doPrivileged1(Native Method)
         at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
    Caused by: javax.xml.transform.TransformerFactoryConfigurationError: Provider com.sap.engine.lib.jaxp.TransformerFactoryImpl not found
         at javax.xml.transform.TransformerFactory.newInstance(Unknown Source)
         at com.euh.FileModule.GetFileNameBean.process(GetFileNameBean.java:76)
         at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0.process(ModuleLocalLocalObjectImpl0.java:103)
         ... 11 more
    Error during processing local bean localejbs/sap.com/com.euh.FileModule/GetFileNameBean
    Module Exception 'com.sap.aii.af.mp.processor.ModuleProcessorException: Processing Error caused by: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.' found, cause: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
    Channel Orders_ftp_sender: Sending file failed with com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback. - continue processing
    Should this traces give me more information?
    mfg,
    matthias

  • Cannot open survey files from email after upgrading SAP gui to 720

    Cannot open survey files attachments from email after upgrading SAP gui from 640  to 720.
    Tried uninstalling & reinstalling but still error persists,
    Error is : cannot split connection string: /h/server name/s/sapdp00 ( from SAP GUI security )
    Please advise.

    Can't say I have seen this error before but if it is pertaining to the new security module within 7.20, which are much more strict then 6.40, I would look under the SAP GUI configuration options.  Focus on Security > Security settings.
    There are pages and pages of rules which can be defined.
    A test could be to disable all of them on an isolated machine and set them to allow and see if your problem persists.  If the error is resolved, it is something in there you need to address.
    Regards,
    Zecher

  • Voice memo missing on iphone 4s after upgrade to ios 7

    voice memo app is missing on my iphone 4s after upgrading to ios 7. any ideas?

    Miracle!!!!!!
    The iOS 7.1 update solved the WIFI issues on my iphone.
    I'll try to upgrade my ipad later on and then
    I think I can sell my hairdryer and my freezer.
    Thanks to the people @ infinite loop ;-)

  • Cannot delete file on win7 after upgrading to Lion

    After upgrading Lion OS X, I can not delete file on Lion partition from win 7. It always says "This file is too large...".
    Also, My 2 HFS partition will not show on win 7. How to solve it?
    I did upgrade BootCamp to 3.3

    What your going to need to do is c boot and install OS X (10.6) from the disk, onto a blank external drive (format the drive first in Disk Utility: GUID OS X Extended (J))
    Once 10.6 is installed, hold the option key and boot from the 10.6 external drive, go through setup with your same user name, and Software Update to 10.6.8
    Then download and install DataRescue  ($99) onto the external 10.6 drive and attach another blank external GUID OS X extended formatted drive and run DataRescue to recover your files to that drive. There will be a lot.
    Data Rescue will read the 1's and 0's of the files themselves regardless of what your partition map says, before they are overwritten.
    After that's done, access the second external drive and pick though the files to recover.
    Once you have gotten all your data, you need to install all your third party programs on the external drive from original sources and update. Then move your files you've recovered to it.
    Once that' is all done, erase one drive and download Winclone, and clone the Bootcamp Windows to the empty drive.
    Then use Disk Utility to Erase with Zero the entire internal drive of all partitions and everything. (select the drive makers name and size on the far left) Format GUID OS x Extended Journaled like always.
    Use Carbon Copy Cloner to clone the 10.6.8 external drive to the internal drive, disconnect the external drive and boot from the internal drive and then install Lion on the internal drive. You can hold option key, click on Purchases to download Lion again.
    Use Bootcamp to set up Windows partition, then follow Winclones directions to clone Windows back into the Bootcamp partition.

  • Missing entrys in SPRO after upgrade to FS-RI 6.60

    Hi,
    We've upgraded FS-RI 472 to 6.60 fp4.  (R/3 470 to ERP 60 EHP 4)
    Refering to the Release notes there should be some new entries under "Accounting", "Settings for Time Period".
    There should be "Edit Financial Years", "Open and Close Accounting Periods". We only have "Edit Scope of Accounting Period".
    Anyone have any idea? I guess I've missed some step in the upgrade.

    Randy,
    Looks like you need to add more space to /tmp directory as I see the following entries in CLONE*.error file.
    CLONE2013-12-28_12-41-01PM.error:
    =================================
    SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20275   Insufficient space to create /tmp/CLONINGCLIENT8522798570339051663.
    SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20275   Minimum required space was at least "1,798" MB, but only "1,737" MB was available for use.
    SEVERE : Dec 28, 2013 12:42:46 PM - ACTION - CLONE-20275   Make sure that the minimum required space is available for use.
    SEVERE : Dec 28, 2013 12:42:46 PM - ERROR - CLONE-20233   Restoring Middleware home for sourceid "mwhome1@FMW_Home" has failed.
    SEVERE : Dec 28, 2013 12:42:46 PM - CAUSE - CLONE-20233   An internal operation failed.
    Thanks,
    Hussein

  • Proxy.PAC file not working after upgrade to 10.9.2

    I have a local proxy.pac file and it was working happily before 10.9.2.
    It was loaded under "Network > Proxies > Automatic Proxy Configuration" and effective for all browsers (Chrome, Safari and Firefox).
    After upgrade to 10.9.2 seems like it's being totally ignored. I have a CNTLM proxy in my machine and can see the traffic coming in. Looking at logs, no traffic really comes in and all browsers try to access internet directly.
    If I set the proxy.pac directly in Firefox, it works but I want all my browsers and application. I want the same functionality as of 10.9.1 and before.

    I submitted a bug report to Apple. The problem is present since 10.9.2, now with 10.10 and iOS. I hope they will take this problem seriously.

  • Win7 Offline Files sync error after upgrade to Lion Server 10.7.2

    Symptom: client is a Win7 laptop, the server is Mac OS X 10.7.3 Lion Server with SMB and AFP shares. Win7 Offline Files stopped working after I upgraded Snow Leopard (non-server version) to Lion Server 10.7.2. After updating to 10.7.3, the problem persists. When syncing, it gives thounsands of error like this: The process cannot access the file because it is being used by another process. WinXP clients are fine with the Offline Files function though.
    I Googled and studied online for several days now and it might be related to the "Oppurtunistic Locking", or "Oplocks" for short, in the SMB protocol. Since Apple has re-written Samba, there's no "smb.conf" anymore to change the Oplocks setting. Maybe it's possible to change the setting in "com.apple.smb.server.plist"?
    From the Internet:
    1. Oplocks should be DISABLED on the server if there is any other file sharing protocol (AFP, etc.) other than SMB.
    2. Offline Files will NOT work properly if Oplocks is disabled on the server side.
    3. It was possible to config oplocks setting in smb.conf in Mac OS X versions prior to Lion but now there's no such config file.
    My Question:
    1. Does anyone else have similar problems?
    2. Is it related to the Oppurtunistic Locking thing?
    3. Is Oppurtunistic Locking enabled or disabled in Lion Server by default?
    4. If it's related to Oplocks, how can I change the setting on the server?
    5. I've noticed that the authentication from Windows PCs to the SMB share on the Lion Server is much slower then in SL. Could this somehow be related to my problem?
    Thanks for your time! :-D

    Any luck getting the info on SMBX parameters like OPLOCKS ? This is apparently causing an issue with Autodesk Revit. I am resorting to installing SMBUP.
    There is an article that describes this method for altering the Lion smbd configuration parameters for honoring ACLs:
    sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.smb.server AclsEnabled -bool NO
    from this article
    http://support.apple.com/kb/TS4149
    and this:
    http://www.stanford.edu/group/macosxsig/blog/2011/08/enable-logging-with-107-smb x-w.html

  • Can't view pdf files using safari after upgrading 10.5.8 to  10.6.5

    I noticed that right after I upgraded from Leopard 10.5.8 to Snow Leopard 10.6.5, I no longer could view any pdf's I would click on unless I used "control click" option to download the file/pdf. Before upgrading all I had to do was click on a pdf link and it opened up automatically in a new window. Now all I get a black screen unless I "control click"
    I am thankful that I saw in the discussion area that I at least have a way to view it but do not understand why upgrading to 10.6.5 changed the way I use to be able to open/view pdf files.
    Thanks

    Hi keyag
    I suspect you've an adobe pdf viewer plugin that requires safari to run in 32 bit mode. Either remove it from HD/Library/Internet Plug-Ins/ & restart Safari; or select Safari in Applications, do a File-Get Info - and check the 32 bit box, again restarting Safari.
    ... do not understand why upgrading to 10.6.5 changed ...
    probably because 10.6.x runs Safari as a 64 bit process by default, and the plugin won't work that way. Maybe there's an update for it (assuming the plugin guess is correct )

  • File Sharing broken after Upgrade to 10.9

    Hello,
    after upgrading to Maverick Server i cannot connect to File Sharing services anymore.
    AFP protocol does not accept my user passwords anymore. Only guest access works.
    I read that Mavericks prefers smb now instead of afp. But smb seems not to be active at all. Allthoh the server app claims that smb is running.
    Any similar observations?

    This might also help: connect with cifs://
    FROM:
    http://osxdaily.com/2013/10/30/connect-smb-nas-network-shares-os-x-mavericks/
    Connect to SMB & NAS Network Shares in OS X Mavericks
    Oct 30, 2013
    ... a very easy workaround to connect to SMB and NAS shares from OS X:
    From the OS X Finder, hit Command+K to summon “Go To Server” as usual.
    In the “Server Address” field, use the cifs:// prefix as follows:
    cifs://127.0.0.1
    Connect to the SMB, NAS, or Windows share as usual.
    ... it’s because using CIFS connects with SMB1 rather than the (currently) buggy implementation of SMB2. ... Apple adjusted the default protocol for SMB (Samba, the Windows file sharing ability) from SMB1 to SMB2, and the SMB2 implementation apparently carries a bug which is incompatible with ...

  • I cannot recover my pdf files from ibooks after upgrading to os 6

    Does anyone know how to recover pdf files from ibooks after os 6 upgrade?

    In your next-to-last post, you said: "... when I recovered the iBooks app, it was empty due to having a different owner of the app."
    I'm suggesting you change the owner of the app and maybe then it won't be empty.
    You can delete/remove the app and get your own from the app store and install it.  Maybe then you'll see your PDFs.

  • File Upload error after upgrade to 1.6

    After upgrade to HTML version 1.6 from 1.5 it's impossible to upload files to the Database.
    The same effect apears during application import or when i try to uploaad an file inside of an application.
    Does anyone know this? How to solve it?
    Thanks
    Thorsten

    Scott said:
    "You should probably revoke those grants, unless the user was HTMLDB_PUBLIC_USER. The DAD user should always be HTMLDB_PUBLIC_USER, unless you are using a dedicated DAD for database authentication, in which case that DAD should use a private document table. HTMLDB_PUBLIC_USER should already have access to the wwv_flow_file_objects$ unless something went wrong during installation."
    I am facing a very similar problem since we upgraded to 1.6. File uploads do not work unless privileges on wwv_flow_file_objects$ are granted to the user (we use database authentication). By default, NO users or roles have access to this table. Does this mean that something went wrong during installation?
    I am confused by this: "...unless you are using a dedicated DAD for database authentication, in which case that DAD should use a private document table." Does that mean that whenever database authentication is used, wwv_flow_file_objects$ is no longer the repository for uploaded files? How should it work then?

  • Drivers missing for Envy 6 after upgrade to windows 8

    There are a few missing drivers shown on the device manager after Upgrade to windows 8 for model: Envy 6-1006TX.
    The four items are:-
    1. PCI Device
    2. PCI Simple Communications Controller
    3. Unknown device
    4. Unknown device
    I try to find it on the support and download page on the product support but could not find.
    i even go to HP Support Assistant website to try download the support assistant for window 8, but the links is not working.
    Can anyone assist ? Thanks

    Enter the Device Manager in Windows 8 by holding the Windows key and tapping the x key once. In the menu that is invoked, select the Device Manager. Right-click on the unknown device and then select the details tab. See the following image. I arbitrarily selected a device as an example. 
    Post the image by using the snipping tool. The snipping tool can be found by using the Windows key + x and selecting search. Type in "snipping" and the snipping tool link will appear for you to click on it and use as in the following image.
    Post all that is before the &SUBSYS in the top PCI\VEN alphanumeric string and I can use it to see if the manufacturer of the device has  posted a Windows 8 driver. Sometimes the success rate for finding a driver is greater at the manufacturer website.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for